Luis Amaro Martins
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Luis Amaro Martins has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
- Senentxu Lanceros Mendez
BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain
8 shared publications - Carlos Miguel Costa
Physics Centre of Minho and Porto Universities (CF-UM-UP), University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal
4 shared publications - Daniela Maria Correia
University of Minho
4 shared publications José Luis Gómez Ribelles
4 shared publications- José Luis Gómez Ribelles
Centre for Biomaterials and Tissue Engineering, CBIT, Universitat Politècnica de València, 46022 Valencia, Spain
4 shared publications - Clarisse Ribeiro
CF‐UM‐UP – Physics Centre of Minho and Porto Universities University of Minho Braga Portugal
3 shared publications
Latest Publications
- Open Access
Combined Effect of Adsorption and Photocatalysis for the Removal of Ciprofloxacin from Aqueous Solutions with Poly(Vinylidene Fluoride)/Titanium Dioxide Microspheres
Significant amounts of antibiotics are found in wastewater and drinking water streams due to their widespread use in human and veterinary medicine and their incomplete uptake by living organisms. Among the technologies developed to address this problem, adsorption and advanced oxidation processes, including photocatalysis, are widely employed for the remediation of antibiotic-contaminated waters. In this work, poly(vinylidene fluoride) (PVDF)/TiO2 composite microspheres with highly porous structures were developed and evaluated for the removal of ciprofloxacin (CIP) from aqueous solutions. Scanning electron microscopy revealed that TiO2 nanoparticles migrate towards the microsphere surface during PVDF crystallisation, forming a dense surface coating, whereas the microsphere interior remains highly porous. Focused ion beam microscopy confirmed the presence of TiO2 within the inter-spherulitic regions of the microsphere core. A key finding is that a pre-wetting protocol facilitates water penetration into the highly hydrophobic PVDF structure, enabling efficient CIP adsorption in the dark, while untreated microspheres show only limited adsorption. This work demonstrates that CIP removal by porous PVDF/TiO2 microspheres is associated with both the surface segregation of TiO2 nanoparticles and the accessibility of the porous structure to water. These findings emphasise the importance of pore accessibility in the design of porous polymer-based materials for water treatment.
Open AccessCombined Effect of Adsorption and Photocatalysis for the Removal of Ciprofloxacin from Aqueous Solutions with Poly(Vinylidene Fluoride)/Titanium Dioxide Microspheres
Significant amounts of antibiotics are found in wastewater and drinking water streams due to their widespread use in human and veterinary medicine and their incomplete uptake by living organisms. Among the technologies developed to address this problem, adsorption and advanced oxidation processes, including photocatalysis, are widely employed for the remediation of antibiotic-contaminated waters. In this work, poly(vinylidene fluoride) (PVDF)/TiO2 composite microspheres with highly porous structures were developed and evaluated for the removal of ciprofloxacin (CIP) from aqueous solutions. Scanning electron microscopy revealed that TiO2 nanoparticles migrate towards the microsphere surface during PVDF crystallisation, forming a dense surface coating, whereas the microsphere interior remains highly porous. Focused ion beam microscopy confirmed the presence of TiO2 within the inter-spherulitic regions of the microsphere core. A key finding is that a pre-wetting protocol facilitates water penetration into the highly hydrophobic PVDF structure, enabling efficient CIP adsorption in the dark, while untreated microspheres show only limited adsorption. This work demonstrates that CIP removal by porous PVDF/TiO2 microspheres is associated with both the surface segregation of TiO2 nanoparticles and the accessibility of the porous structure to water. These findings emphasise the importance of pore accessibility in the design of porous polymer-based materials for water treatment.
- 23 July 2026
- Published by Elsevier in Carbohydrate Research
- Vol. 568, 110049
Enzymatic degradation of Hyaluronic acid/Poly-l-Lysine capsules for burst drug release
- 23 July 2026
- Published by Elsevier in Carbohydrate Research
- Vol. 568, 110049
Enzymatic degradation of Hyaluronic acid/Poly-l-Lysine capsules for burst drug release
- Open Access
- 29 May 2026
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 209
Phenolic-modified bacterial nanocellulose composites with antimicrobial and antioxidant activity for implantable biomaterials
- 29 May 2026
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 209
Open AccessPhenolic-modified bacterial nanocellulose composites with antimicrobial and antioxidant activity for implantable biomaterials
- Open Access
- 20 February 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (9) , 3639-3653
Effect of Cation Type on the Isothermal Crystallization of Poly(vinylidene fluoride) Blended in Ionic Liquids with [Eu(tta) 4 ] − Anion
To develop smart materials with tailored functional response, the combination of poly(vinylidene fluoride) (PVDF) and advanced ionic additives such as ionic liquids (ILs) is increasingly being investigated. Depending on the processing conditions, the incorporation of these additives into PVDF, together with their functional response, promotes the nucleation of specific electroactive phases. This work explores the effect of incorporating sodium tetra(2-thenoyltrifluoroacetonate) europate(III), Na[Eu(tta)4] and 1-butyl-3-methylimidazolium tetra(2-thenoyltrifluoroacetonate) europate(III), [Bmim][Eu(tta)4], into PVDF matrices through a comprehensive analysis of isothermal crystallization behavior, morphological features, crystalline phase development, and dielectric behavior. Field-emission scanning electron microscopy (FESEM) was used to analyze the microstructure, while Fourier transform infrared (FTIR) spectroscopy was used to assess the development of PVDF crystalline phases during its isothermal crystallization at various temperatures. All samples exhibited α, β, and γ crystalline phases, although their relative proportions differed significantly depending on the type of filler used. This suggests that [Bmim][Eu(tta)4] is a strong promoter of the electroactive (EA) phases of PVDF. The results are attributed to the interaction between the IL charges and the PVDF dipoles of the EA structures, which are promoted by higher crystallization temperatures, as supported by both FTIR and DSC data. Thus, the addition of Na[Eu(tta)4] and [Bmim][Eu(tta)4] strongly influences the crystallization kinetics of PVDF and allows nucleation of specific phases of PVDF. Additionally, dielectric spectroscopy revealed that the nature of the cation strongly influences conductivity behavior, as demonstrated by the dielectric results. Overall, the incorporation of Na[Eu(tta)4] and [Bmim][Eu(tta)4] not only influences the crystallization kinetics of PVDF but also provides PVDF with intrinsic functional properties such as luminescent behavior and improved electrical performance, offering a simple and efficient strategy of nucleating specific PVDF phases.
- 20 February 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (9) , 3639-3653
Open AccessEffect of Cation Type on the Isothermal Crystallization of Poly(vinylidene fluoride) Blended in Ionic Liquids with [Eu(tta) 4 ] − Anion
To develop smart materials with tailored functional response, the combination of poly(vinylidene fluoride) (PVDF) and advanced ionic additives such as ionic liquids (ILs) is increasingly being investigated. Depending on the processing conditions, the incorporation of these additives into PVDF, together with their functional response, promotes the nucleation of specific electroactive phases. This work explores the effect of incorporating sodium tetra(2-thenoyltrifluoroacetonate) europate(III), Na[Eu(tta)4] and 1-butyl-3-methylimidazolium tetra(2-thenoyltrifluoroacetonate) europate(III), [Bmim][Eu(tta)4], into PVDF matrices through a comprehensive analysis of isothermal crystallization behavior, morphological features, crystalline phase development, and dielectric behavior. Field-emission scanning electron microscopy (FESEM) was used to analyze the microstructure, while Fourier transform infrared (FTIR) spectroscopy was used to assess the development of PVDF crystalline phases during its isothermal crystallization at various temperatures. All samples exhibited α, β, and γ crystalline phases, although their relative proportions differed significantly depending on the type of filler used. This suggests that [Bmim][Eu(tta)4] is a strong promoter of the electroactive (EA) phases of PVDF. The results are attributed to the interaction between the IL charges and the PVDF dipoles of the EA structures, which are promoted by higher crystallization temperatures, as supported by both FTIR and DSC data. Thus, the addition of Na[Eu(tta)4] and [Bmim][Eu(tta)4] strongly influences the crystallization kinetics of PVDF and allows nucleation of specific phases of PVDF. Additionally, dielectric spectroscopy revealed that the nature of the cation strongly influences conductivity behavior, as demonstrated by the dielectric results. Overall, the incorporation of Na[Eu(tta)4] and [Bmim][Eu(tta)4] not only influences the crystallization kinetics of PVDF but also provides PVDF with intrinsic functional properties such as luminescent behavior and improved electrical performance, offering a simple and efficient strategy of nucleating specific PVDF phases.
- Open Access
- 21 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 28
Removing antibiotics from watercourses by surface immobilization of TiO2 nanoparticles on poly(vinylidene fluoride) membranes by recrystallization under pressure
- 21 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 28
Open AccessRemoving antibiotics from watercourses by surface immobilization of TiO2 nanoparticles on poly(vinylidene fluoride) membranes by recrystallization under pressure
- 9 October 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 75
Increased electroactive properties of poly(vinylidene fluoride) films by thermo-mechanical post-processing
- 9 October 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 75
Increased electroactive properties of poly(vinylidene fluoride) films by thermo-mechanical post-processing
- 30 September 2024
- Published by IOP Publishing in Biomedical Materials
- Vol. 19 (6) , 065013
Assemblable 3D biomimetic microenvironment for hMSC osteogenic differentiation
Adequate simulation mimicking a tissue’s native environment is one of the elemental premises in tissue engineering. Although various attempts have been made to induce human mesenchymal stem cells (hMSC) into an osteogenic pathway, they are still far from widespread clinical application. Most strategies focus primarily on providing a specific type of cue, inadequately replicating the complexity of the bone microenvironment. An alternative multifunctional platform for hMSC osteogenic differentiation has been produced. It is based on poly(vinylidene fluoride) (PVDF) and cobalt ferrites magnetoelectric microspheres, functionalized with collagen and gelatin, and packed in a 3D arrangement. This platform is capable of performing mechanical stimulation of piezoelectric PVDF, mimicking the bones electromechanical biophysical cues. Surface functionalization with extracellular matrix biomolecules and osteogenic medium complete this all-round approach. hMSC were cultured in osteogenic inducing conditions and tested for proliferation, surface biomarkers, and gene expression to evaluate their osteogenic commitment.
- 30 September 2024
- Published by IOP Publishing in Biomedical Materials
- Vol. 19 (6) , 065013
Assemblable 3D biomimetic microenvironment for hMSC osteogenic differentiation
Adequate simulation mimicking a tissue’s native environment is one of the elemental premises in tissue engineering. Although various attempts have been made to induce human mesenchymal stem cells (hMSC) into an osteogenic pathway, they are still far from widespread clinical application. Most strategies focus primarily on providing a specific type of cue, inadequately replicating the complexity of the bone microenvironment. An alternative multifunctional platform for hMSC osteogenic differentiation has been produced. It is based on poly(vinylidene fluoride) (PVDF) and cobalt ferrites magnetoelectric microspheres, functionalized with collagen and gelatin, and packed in a 3D arrangement. This platform is capable of performing mechanical stimulation of piezoelectric PVDF, mimicking the bones electromechanical biophysical cues. Surface functionalization with extracellular matrix biomolecules and osteogenic medium complete this all-round approach. hMSC were cultured in osteogenic inducing conditions and tested for proliferation, surface biomarkers, and gene expression to evaluate their osteogenic commitment.
- Open Access
- 31 May 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (22) , 10480-10487
Influence of the Inclusion of Propylene Carbonate Electrolyte Solvent on the Microstructure and Thermal and Mechanical Stability of Poly(l-lactic acid) and Poly(vinylidene fluoride-co-hexafluoropropylene) Battery Separator Membranes
The influence of the inclusion of the organic solvent propylene carbonate (PC) in microporous membranes based on poly(l-lactic acid) (PLLA) and poly(vinylidene fluoride-co-hexafluoropropylene) P(VDF-HFP) has been studied based on its relevance for the application of those separator membranes in lithium-ion batteries. The membranes have been produced through solvent casting and characterized with respect to the swelling ratio originated by the uptake of the organic solvent. The organic solvent uptake affects the porous microstructure and crystalline phase of both membrane types. The organic solvent uptake amount affects the crystal size of the membranes as a consequence of the interaction between the solvent and the polymer, since the presence of the solvent modifies the melting process of the polymer crystals due to a freezing temperature depression effect. It is also shown that the organic solvent partially penetrates into the amorphous phase of the polymer, leading to a mechanical plasticizing effect. Thus, the interaction between the organic solvent and the porous membrane is essential to properly tailor membrane properties, which in turn will affect lithium-ion battery performance.
- 31 May 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (22) , 10480-10487
Open AccessInfluence of the Inclusion of Propylene Carbonate Electrolyte Solvent on the Microstructure and Thermal and Mechanical Stability of Poly(l-lactic acid) and Poly(vinylidene fluoride-co-hexafluoropropylene) Battery Separator Membranes
The influence of the inclusion of the organic solvent propylene carbonate (PC) in microporous membranes based on poly(l-lactic acid) (PLLA) and poly(vinylidene fluoride-co-hexafluoropropylene) P(VDF-HFP) has been studied based on its relevance for the application of those separator membranes in lithium-ion batteries. The membranes have been produced through solvent casting and characterized with respect to the swelling ratio originated by the uptake of the organic solvent. The organic solvent uptake affects the porous microstructure and crystalline phase of both membrane types. The organic solvent uptake amount affects the crystal size of the membranes as a consequence of the interaction between the solvent and the polymer, since the presence of the solvent modifies the melting process of the polymer crystals due to a freezing temperature depression effect. It is also shown that the organic solvent partially penetrates into the amorphous phase of the polymer, leading to a mechanical plasticizing effect. Thus, the interaction between the organic solvent and the porous membrane is essential to properly tailor membrane properties, which in turn will affect lithium-ion battery performance.
- Open Access
Stability of Biomimetically Functionalised Alginate Microspheres as 3D Support in Cell Cultures
Alginate hydrogels can be used to develop a three-dimensional environment in which various cell types can be grown. Cross-linking the alginate chains using reversible ionic bonds opens up great possibilities for the encapsulation and subsequent release of cells or drugs. However, alginate also has a drawback in that its structure is not very stable in a culture medium with cellular activity. This work explored the stability of alginate microspheres functionalised by grafting specific biomolecules onto their surface to form microgels in which biomimetic microspheres surrounded the cells in the culture, reproducing the natural microenvironment. A study was made of the stability of the microgel in different typical culture media and the formation of polyelectrolyte multilayers containing polylysine and heparin. Multiple myeloma cell proliferation in the culture was tested in a bioreactor under gentle agitation.
Open AccessStability of Biomimetically Functionalised Alginate Microspheres as 3D Support in Cell Cultures
Alginate hydrogels can be used to develop a three-dimensional environment in which various cell types can be grown. Cross-linking the alginate chains using reversible ionic bonds opens up great possibilities for the encapsulation and subsequent release of cells or drugs. However, alginate also has a drawback in that its structure is not very stable in a culture medium with cellular activity. This work explored the stability of alginate microspheres functionalised by grafting specific biomolecules onto their surface to form microgels in which biomimetic microspheres surrounded the cells in the culture, reproducing the natural microenvironment. A study was made of the stability of the microgel in different typical culture media and the formation of polyelectrolyte multilayers containing polylysine and heparin. Multiple myeloma cell proliferation in the culture was tested in a bioreactor under gentle agitation.