MFMarcílio M. A. Filho

Marcílio M. A. Filho

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marcílio M. A. Filho has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A formulation integrating the code recommendations for the design of steel fiber reinforced concrete (SFRC) beams with redundant supports

    by Marcílio M. A. Filho, Joaquim A. O. Barros, Fábio P. Figueiredo

    An experimental program was conducted to evaluate the effectiveness of replacing conventional reinforcement by steel fiber reinforcement in the hogging region of continuous shallow beams (with redundant supports). Seven groups of steel fiber reinforced concrete (SFRC) continuous shallow beams were tested under flexural loading, simulating a strip of a slab supported by three aligned piles or columns. The tests also aimed to assess the influence of different ratios of conventional reinforcement in both sagging and hogging regions, under serviceability and ultimate limit state conditions (SLS and ULS, respectively). The results of this experimental program are used to assess the predictive performance of an analytical model for the design of SFRC beams of redundant support conditions. This model is based on the flexibility method and considers the moment‐curvature relationship to derive the flexural stiffness during the loading process of a SFRC beam. The moment‐curvature is determined by using the recommendations of the Model Code 2020 (MC2020) and the Eurocode 1992‐1‐1 (EC2). The predictive performance of the developed approach is assessed on the serviceability and ultimate limit design verifications considering the results from the experimental program. When using average values for the material properties, the analytical model using both the MC2020 an EC2 provided overpredictions in terms of load carrying capacity for SLS and ULS design verifications (up to 57% and 38%, respectively, in terms of normalized error). When using characteristic values, the overprediction was limited to 31% with the MC2020, while over‐ and under‐predictions were obtained with EC2, limited to 25%. By applying the Estimation of the Coefficient of Variation method, safe predictions were obtained using MC2020 and EC2 formulations. It was verified that normalized error of the average crack width was less than 18% when using MC2020 and EC2 formulations. Finally, numerical studies were conducted on statically indeterminate shallow beams to assess the influence of both beam scale and the replacement of conventional tensile reinforcement by fibers at the intermediate support on the ULS and SLS design verifications.

  • Experimental Investigation of Statically Indeterminate SFRC Shallow Beams

    by Marcílio M. A. Filho, Joaquim A. O. Barros, Hamidreza Salehian, Fábio P. Figueiredo

  • Open Access

    Thermal Behaviour of Rebars and Steel Deck Components of Composite Slabs under Natural Fire

    by Marcílio M. A. Filho, Paulo A. G. Piloto, Carlos Balsa

    Most of the studies involving composite slabs under fire follow the standard fire scenario described by the ISO 834 curve, disregarding the cooling-phase. However, recent studies show that this phase is equally important, as it can lead to the collapse of the structure. Therefore, the present research carried out a parametric study, using numerical models, validated through experimental tests, to evaluate the thermal behaviour of the composite slabs components under natural fire. The results showed that the maximum temperatures in the reinforcement bars occur during the cooling-phase, reaching temperatures up to 300% higher than at the heating-phase, on the steel deck occur at the end of heating, and that the concrete thickness above the steel deck influences the temperature of these components. Also, during the cooling-phase, a “heat bubble” effect is observed on the ribs of the composite slabs, where the reinforcement bars are normally placed. These results highlight the importance of considering different natural fire scenarios, in the structural performance and safety of composite slabs, since during the cooling-phase there is still heat transfer between the elements, which can lead to slab failure. New parameters are proposed to find the temperature of each component for different fire ratings.