Biao Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Biao Li has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Can Wan
Zhejiang University
3 shared publications Can Wan
College of Electrical Engineering Zhejiang University Hangzhou People's Republic of China
2 shared publicationsPeng Yu
College of Electrical Engineering Zhejiang University Hangzhou People's Republic of China
2 shared publications- Ping Ju
Hohai University
2 shared publications Yunyi Li
2 shared publicationsDawei Chen
China Electric Power Research Institute Co., Ltd., Nanjing, China
1 shared publication
Latest Publications
- 19 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 41 (2) , 1308-1320
A Point-Hyperplane Geometry Method for Operational Security Region of Renewable Energy Generation in Power Systems
The rapid growth of renewable energy generation challenges the secure operation of power systems. It becomes crucial to quantify the critical security boundaries and hosting capability of renewable generation at the system operation level. This paper proposes a novel point-hyperplane geometry (PHG) method to accurately obtain the geometric expression of the operational security region of renewable energy generation for power systems. Firstly, the geometric expression of the operational security region is defined as a polytope of boundary hyperplanes in the form of inequalities satisfying the system operation constraints. Then, an orthogonal basis generation method is proposed to solve a single boundary hyperplane of the polytope based on intersecting and orthogonal geometric principles. Next, a point-hyperplane iteration algorithm is developed to progressively obtain the overall geometric polytope of the operational security region of renewable energy generation in power systems. Besides, the flexible performance trade-off can be achieved by modifying the proposed maximum tolerated angle between adjacent hyperplanes. Finally, comprehensive case stydies verify the effectiveness and superiority of the PHG method.
- 19 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 41 (2) , 1308-1320
A Point-Hyperplane Geometry Method for Operational Security Region of Renewable Energy Generation in Power Systems
The rapid growth of renewable energy generation challenges the secure operation of power systems. It becomes crucial to quantify the critical security boundaries and hosting capability of renewable generation at the system operation level. This paper proposes a novel point-hyperplane geometry (PHG) method to accurately obtain the geometric expression of the operational security region of renewable energy generation for power systems. Firstly, the geometric expression of the operational security region is defined as a polytope of boundary hyperplanes in the form of inequalities satisfying the system operation constraints. Then, an orthogonal basis generation method is proposed to solve a single boundary hyperplane of the polytope based on intersecting and orthogonal geometric principles. Next, a point-hyperplane iteration algorithm is developed to progressively obtain the overall geometric polytope of the operational security region of renewable energy generation in power systems. Besides, the flexible performance trade-off can be achieved by modifying the proposed maximum tolerated angle between adjacent hyperplanes. Finally, comprehensive case stydies verify the effectiveness and superiority of the PHG method.
- Open Access
A Point-Hyperplane Geometry Method for Operational Security Region of Renewable Energy Generation in Power Systems
The rapid growth of renewable energy generation challenges the secure operation of power systems. It becomes crucial to quantify the critical security boundaries and hosting capability of renewable generation at the system operation level. This paper proposes a novel point-hyperplane geometry (PHG) method to accurately obtain the geometric expression of the operational security region of renewable energy generation for power systems. Firstly, the geometric expression of the operational security region is defined as a polytope of boundary hyperplanes in the form of inequalities satisfying the system operation constraints. Then, an orthogonal basis generation method is proposed to solve a single boundary hyperplane of the polytope based on intersecting and orthogonal geometric principles. Next, a point-hyperplane iteration algorithm is developed to progressively obtain the overall geometric polytope of the operational security region of renewable energy generation in power systems. Besides, the flexible performance trade-off can be achieved by modifying the proposed maximum tolerated angle between adjacent hyperplanes. Finally, comprehensive case studies verify the effectiveness and superiority of the PHG method.
Open AccessA Point-Hyperplane Geometry Method for Operational Security Region of Renewable Energy Generation in Power Systems
The rapid growth of renewable energy generation challenges the secure operation of power systems. It becomes crucial to quantify the critical security boundaries and hosting capability of renewable generation at the system operation level. This paper proposes a novel point-hyperplane geometry (PHG) method to accurately obtain the geometric expression of the operational security region of renewable energy generation for power systems. Firstly, the geometric expression of the operational security region is defined as a polytope of boundary hyperplanes in the form of inequalities satisfying the system operation constraints. Then, an orthogonal basis generation method is proposed to solve a single boundary hyperplane of the polytope based on intersecting and orthogonal geometric principles. Next, a point-hyperplane iteration algorithm is developed to progressively obtain the overall geometric polytope of the operational security region of renewable energy generation in power systems. Besides, the flexible performance trade-off can be achieved by modifying the proposed maximum tolerated angle between adjacent hyperplanes. Finally, comprehensive case studies verify the effectiveness and superiority of the PHG method.
- 8 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 15 (2) , 1438-1449
Voltage-Price Coupling in Distribution Networks
Demand-side users are practical and economical resources for participating in voltage regulation of distribution networks, whose regulation effect is closely related to the price. This paper proposes a novel voltage-price coupling (VPC) mechanism to construct a fair voltage-based nodal pricing method for distribution networks to encourage demand-side users to participate in voltage regulation to improve voltage quality. The voltage impact factor is established to fairly characterize the impact of each nodal power on the voltage deviation in the distribution network. Further, the VPC mechanism is constructed to highly couple the nodal price with the voltage in both spatial and time dimensions by establishing distribution rules of prices at different nodes and different horizons. The VPC mechanism forms a fair and adaptable voltage-based nodal pricing method for distribution networks, which also considers the impact on the existing pricing mechanism, and the balance between the voltage regulation effect and user experience. Then, a price-driven voltage regulation (PVR) model is proposed for the distribution network to reduce voltage deviations and user costs, which integrates the demand-side resource management, voltage regulation, and voltage-based nodal pricing. Case studies verify the effectiveness of the VPC mechanism and the PVR model.
- 8 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 15 (2) , 1438-1449
Voltage-Price Coupling in Distribution Networks
Demand-side users are practical and economical resources for participating in voltage regulation of distribution networks, whose regulation effect is closely related to the price. This paper proposes a novel voltage-price coupling (VPC) mechanism to construct a fair voltage-based nodal pricing method for distribution networks to encourage demand-side users to participate in voltage regulation to improve voltage quality. The voltage impact factor is established to fairly characterize the impact of each nodal power on the voltage deviation in the distribution network. Further, the VPC mechanism is constructed to highly couple the nodal price with the voltage in both spatial and time dimensions by establishing distribution rules of prices at different nodes and different horizons. The VPC mechanism forms a fair and adaptable voltage-based nodal pricing method for distribution networks, which also considers the impact on the existing pricing mechanism, and the balance between the voltage regulation effect and user experience. Then, a price-driven voltage regulation (PVR) model is proposed for the distribution network to reduce voltage deviations and user costs, which integrates the demand-side resource management, voltage regulation, and voltage-based nodal pricing. Case studies verify the effectiveness of the VPC mechanism and the PVR model.
- Open Access
- 12 January 2023
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 10
Transactive energy system: Concept, configuration, and mechanism
Transactive energy systems (TESs) combine both economical and control mechanisms, and have become promising solutions to integrate distributed energy resources (DERs) in modern power systems. This article will introduce the basic concept of a TES, including its definition, process, time scale, and benefits. The configuration of the TES is then described in detail from the perspectives of the physical system, information system, transaction system, and regulatory system. The transaction mechanism allows participants (e.g., customer, generator, transmission operator, marketer, etc.) to conduct various transactions with any other party to the extent that regulatory policy permits. Transactive control is regarded as one of the most advanced approaches to realize the full response potential of flexible devices and respect the end user’s privacy, preference, and free will. Finally, some challenges to the development of TESs that arise from the limitations of current equipment level and methodological concepts will be discussed. In summary, TESs provide a more efficient, fair, and transparent environment for participants to promote DERs utilization, improve market efficiency, and increase economic benefits.
- 12 January 2023
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 10
Open AccessTransactive energy system: Concept, configuration, and mechanism
Transactive energy systems (TESs) combine both economical and control mechanisms, and have become promising solutions to integrate distributed energy resources (DERs) in modern power systems. This article will introduce the basic concept of a TES, including its definition, process, time scale, and benefits. The configuration of the TES is then described in detail from the perspectives of the physical system, information system, transaction system, and regulatory system. The transaction mechanism allows participants (e.g., customer, generator, transmission operator, marketer, etc.) to conduct various transactions with any other party to the extent that regulatory policy permits. Transactive control is regarded as one of the most advanced approaches to realize the full response potential of flexible devices and respect the end user’s privacy, preference, and free will. Finally, some challenges to the development of TESs that arise from the limitations of current equipment level and methodological concepts will be discussed. In summary, TESs provide a more efficient, fair, and transparent environment for participants to promote DERs utilization, improve market efficiency, and increase economic benefits.
- Open Access
- 4 January 2023
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 17 (6) , 1298-1309
Generalized linear‐constrained optimal power flow for distribution networks
Optimal power flow (OPF) plays an important role in the secure and economical operation of the distribution network. This paper proposes a novel generalized linear‐constrained optimal power flow (GLOPF) model for both radial and mesh distribution networks, which iteratively approaches the optimal solution to the original OPF problem. The first‐order Taylor series approximation method is applied to linearize the non‐linear and non‐convex power flow constraints for a given Taylor expansion point (TEP). In addition, the objective function of the GLOPF model is only added with an easy‐compute second‐order penalty on state variables, which is at least positive semi‐definite and guarantees the convexity of the quadratic optimization. Then a TEP‐based iterative (TEP‐I) method is proposed in the GLOPF model to construct a series of linear‐constrained convex quadratic optimizations, which avoids the complex calculation of quasi‐Hessian or Hessian matrices in traditional sequential programming methods. The converged solution to the GLOPF model is proved to satisfy the Karush–Kuhn–Tucker conditions of the original OPF problem. Furthermore, the GLOPF model at first and second iterations can be implemented as the ‘cold‐start’ and ‘warm‐start’ LOPF models, respectively. Case studies verify the super‐linear convergence and high accuracy of the proposed GLOPF model.
- 4 January 2023
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 17 (6) , 1298-1309
Open AccessGeneralized linear‐constrained optimal power flow for distribution networks
Optimal power flow (OPF) plays an important role in the secure and economical operation of the distribution network. This paper proposes a novel generalized linear‐constrained optimal power flow (GLOPF) model for both radial and mesh distribution networks, which iteratively approaches the optimal solution to the original OPF problem. The first‐order Taylor series approximation method is applied to linearize the non‐linear and non‐convex power flow constraints for a given Taylor expansion point (TEP). In addition, the objective function of the GLOPF model is only added with an easy‐compute second‐order penalty on state variables, which is at least positive semi‐definite and guarantees the convexity of the quadratic optimization. Then a TEP‐based iterative (TEP‐I) method is proposed in the GLOPF model to construct a series of linear‐constrained convex quadratic optimizations, which avoids the complex calculation of quasi‐Hessian or Hessian matrices in traditional sequential programming methods. The converged solution to the GLOPF model is proved to satisfy the Karush–Kuhn–Tucker conditions of the original OPF problem. Furthermore, the GLOPF model at first and second iterations can be implemented as the ‘cold‐start’ and ‘warm‐start’ LOPF models, respectively. Case studies verify the super‐linear convergence and high accuracy of the proposed GLOPF model.
- Open Access
- 2 August 2022
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 16 (19) , 3814-3824
A bi‐level transactive control model for integrating decision‐making and DLMP‐pricing in distribution networks
The market‐driven demand side management of distribution networks suffers from the challenge of operational security issues. This paper proposes a distribution locational marginal price (DLMP) based bi‐level transactive control model for distribution networks to manage demand side resources of nodal agents, ensuring both the network security and the agents' optimal decision. The proposed model consists of a DLMP‐pricing model at the upper level and DLMP‐based demand response (D‐DR) models at the lower level, integrating the DLMP‐pricing of the distribution network and the decision‐making of agents. The DLMP‐pricing model is constructed as the dual form of a linearized optimal power flow problem to determine DLMP related to the decision of all agents. The D‐DR model enables each nodal agent to minimize its own expenditure under the DLMP, which is established as a linear programming problem. The bi‐level model is converted into single‐level programming through replacing the D‐DR models by Karush‐Kuhn‐Tucker conditions, in which the bi‐linear items of the complementary slackness are further linearized by introducing integer variables. Consequently, the intractable bi‐level transactive control model is equivalently reconstructed as a single‐level mixed‐integer linear programming problem that can be conveniently solved. Comprehensive numerical studies validate the effectiveness of the proposed model.
- 2 August 2022
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 16 (19) , 3814-3824
Open AccessA bi‐level transactive control model for integrating decision‐making and DLMP‐pricing in distribution networks
The market‐driven demand side management of distribution networks suffers from the challenge of operational security issues. This paper proposes a distribution locational marginal price (DLMP) based bi‐level transactive control model for distribution networks to manage demand side resources of nodal agents, ensuring both the network security and the agents' optimal decision. The proposed model consists of a DLMP‐pricing model at the upper level and DLMP‐based demand response (D‐DR) models at the lower level, integrating the DLMP‐pricing of the distribution network and the decision‐making of agents. The DLMP‐pricing model is constructed as the dual form of a linearized optimal power flow problem to determine DLMP related to the decision of all agents. The D‐DR model enables each nodal agent to minimize its own expenditure under the DLMP, which is established as a linear programming problem. The bi‐level model is converted into single‐level programming through replacing the D‐DR models by Karush‐Kuhn‐Tucker conditions, in which the bi‐linear items of the complementary slackness are further linearized by introducing integer variables. Consequently, the intractable bi‐level transactive control model is equivalently reconstructed as a single‐level mixed‐integer linear programming problem that can be conveniently solved. Comprehensive numerical studies validate the effectiveness of the proposed model.