Tengyu Yang
Tengyu Yang has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Benan Shu
Foshan Transportation Science and Technology Co., Ltd., Foshan 528000, China
3 shared publications - Wenjun Qiu
Foshan Transportation Science and Technology Co., Ltd., Foshan 528000, China
3 shared publications - Yongling Li
Foshan Transportation Science and Technology Co., Ltd., Foshan 528000, China
3 shared publications - Baiyun Li
Foshan Transportation Science and Technology Co., Ltd., Foshan 528000, China
2 shared publications - Bing Qiu
Foshan Transportation Science and Technology Co., Ltd., Foshan 528000, China
2 shared publications - Lixian Guo
Foshan Transportation Science and Technology Co., Ltd., Foshan 528000, China
2 shared publications
Latest Publications
- Open Access
Coupling Effect of Expansion Agent and Internal Curing Aggregate on Shrinkage of High-Modulus Ultra-High-Performance Concrete
In the realm of bridge structural engineering, it is customary to meticulously contemplate the material’s strength and rigidity attributes during the dimensioning phase. In recent years, there has been a burgeoning interest in employing Ultrahigh-Performance Concrete (abbreviated as UHPC) for the construction of bridge decks and wet joints. However, the large self-shrinkage of UHPC can easily lead to shrinkage cracking and affect its service life. This study delves into the utilization of a blend of basalt coarse aggregate and high-modulus aggregate (HMA) in the formulation of Ultrahigh-Performance Concrete (UHPC) with the objectives of achieving exceptional strength (>180 MPa), superior modulus of elasticity (>56 GPa), and synergistic effect of using prewetted internal curing aggregate (ICA), metallurgical ore sand (MOS), and calcium–magnesium composite-based expansion agent (EA) to reduce the shrinkage of UHPC. Furthermore, the mechanical properties, shrinkage, hydration process, and microstructure of UHPC prepared with EA and ICA were studied. The results show that UHPC prepared with both 3% EA and 20% ICA had the optimal volume stability (the shrinkage was only 273 με at 180 d). In contrast, the 180 d shrinkage of UHPC with 3% EA and 20% ICA separately was 287 με and 373 με, respectively. In addition, the incorporation of EA and ICA can effectively improve the flexural strength of UHPC, although it affects the compressive strength and modulus of elasticity of UHPC (small decrease).
Open AccessCoupling Effect of Expansion Agent and Internal Curing Aggregate on Shrinkage of High-Modulus Ultra-High-Performance Concrete
In the realm of bridge structural engineering, it is customary to meticulously contemplate the material’s strength and rigidity attributes during the dimensioning phase. In recent years, there has been a burgeoning interest in employing Ultrahigh-Performance Concrete (abbreviated as UHPC) for the construction of bridge decks and wet joints. However, the large self-shrinkage of UHPC can easily lead to shrinkage cracking and affect its service life. This study delves into the utilization of a blend of basalt coarse aggregate and high-modulus aggregate (HMA) in the formulation of Ultrahigh-Performance Concrete (UHPC) with the objectives of achieving exceptional strength (>180 MPa), superior modulus of elasticity (>56 GPa), and synergistic effect of using prewetted internal curing aggregate (ICA), metallurgical ore sand (MOS), and calcium–magnesium composite-based expansion agent (EA) to reduce the shrinkage of UHPC. Furthermore, the mechanical properties, shrinkage, hydration process, and microstructure of UHPC prepared with EA and ICA were studied. The results show that UHPC prepared with both 3% EA and 20% ICA had the optimal volume stability (the shrinkage was only 273 με at 180 d). In contrast, the 180 d shrinkage of UHPC with 3% EA and 20% ICA separately was 287 με and 373 με, respectively. In addition, the incorporation of EA and ICA can effectively improve the flexural strength of UHPC, although it affects the compressive strength and modulus of elasticity of UHPC (small decrease).
- Open Access
Preparation and Performance Study of Radiation-Proof Ultra-High-Performance Concrete
With the continuous development of nuclear technology, it is necessary to urgently solve the nuclear safety problem. γ-rays have a strong penetrating power. The γ-ray-shielding performance of ordinary concrete prepared with natural sand is weak and cannot meet the practical application of engineering. The γ-ray shielding performance of concrete can be effectively improved through the use of titaniferous sand with a better γ-ray protection effect. To prepare ultra-high-performance concrete (UHPC) that can provide radiation protection, the influence law of its performance was investigated. The effects of ilmenite sand on the workability, mechanical properties, durability, and radiation-shielding properties of UHPC were investigated via mix testing, compressive strength and flexural strength testing, and a radiation-shielding simulation. The results show that an appropriate amount of ilmenite sand can improve the ultra-high-performance concrete’s work performance; however, ilmenite sand has little effect on its compressive strength. Although it is not conducive to the development of flexural and tensile strength, the γ-ray shielding performance of the UHPC increases with an increase in the addition of ilmenite sand. When the titanite sand admixture is 70%, the γ-ray linear absorption coefficient of the prepared UHPC is 0.158 cm−1, and the γ-ray shielding performance is significantly improved; meanwhile, its durability performance is excellent.
Open AccessPreparation and Performance Study of Radiation-Proof Ultra-High-Performance Concrete
With the continuous development of nuclear technology, it is necessary to urgently solve the nuclear safety problem. γ-rays have a strong penetrating power. The γ-ray-shielding performance of ordinary concrete prepared with natural sand is weak and cannot meet the practical application of engineering. The γ-ray shielding performance of concrete can be effectively improved through the use of titaniferous sand with a better γ-ray protection effect. To prepare ultra-high-performance concrete (UHPC) that can provide radiation protection, the influence law of its performance was investigated. The effects of ilmenite sand on the workability, mechanical properties, durability, and radiation-shielding properties of UHPC were investigated via mix testing, compressive strength and flexural strength testing, and a radiation-shielding simulation. The results show that an appropriate amount of ilmenite sand can improve the ultra-high-performance concrete’s work performance; however, ilmenite sand has little effect on its compressive strength. Although it is not conducive to the development of flexural and tensile strength, the γ-ray shielding performance of the UHPC increases with an increase in the addition of ilmenite sand. When the titanite sand admixture is 70%, the γ-ray linear absorption coefficient of the prepared UHPC is 0.158 cm−1, and the γ-ray shielding performance is significantly improved; meanwhile, its durability performance is excellent.
- Open Access
Case Study of Solid Waste Based Soft Soil Solidifying Materials Applied in Deep Mixing Pile
The research on solid waste based soft soil solidifying materials has received extensive attention in recent years. However, the properties of deep mixing piles are significantly affected by the construction technology. In view of this, this work carried out the systematic study on the influence of materials, the mixing tool and process optimization on the integrity and mechanical properties of deep mixing piles. Factors considered include the shape of the blade (strip and meniscus), the types of solidifying materials (PO 42.5 cement, self-developed soft soil solidifying agent), the content (50 kg/m, 65 kg/m, 80 kg/m and 100 kg/m) and how many times the materials needed to be mixed (two, four and six times). The solidification mechanism was analyzed. The results showed that the utilization of a meniscus blade contributed to the excellent integrity of the deep mixing pile, as well as solved the problems of oozing slurry and wrapped blade during construction. Mixing the materials four times is the most suitable for the construction of deep mixing piles in organic clay. The solidifying agent deep mixing pile showed satisfactory early and late strength. Microscopic analysis showed that more calcium silicate hydrate and ettringite formed in the solidifying agent solidified soil. Organic clay particles were better cemented and pores were fully filled, so that the solidified soil showed an integral and dense structure. The microscopically integral and dense structure contributed to the excellent integrity and mechanical properties of the solidifying agent deep mixing pile.
Open AccessCase Study of Solid Waste Based Soft Soil Solidifying Materials Applied in Deep Mixing Pile
The research on solid waste based soft soil solidifying materials has received extensive attention in recent years. However, the properties of deep mixing piles are significantly affected by the construction technology. In view of this, this work carried out the systematic study on the influence of materials, the mixing tool and process optimization on the integrity and mechanical properties of deep mixing piles. Factors considered include the shape of the blade (strip and meniscus), the types of solidifying materials (PO 42.5 cement, self-developed soft soil solidifying agent), the content (50 kg/m, 65 kg/m, 80 kg/m and 100 kg/m) and how many times the materials needed to be mixed (two, four and six times). The solidification mechanism was analyzed. The results showed that the utilization of a meniscus blade contributed to the excellent integrity of the deep mixing pile, as well as solved the problems of oozing slurry and wrapped blade during construction. Mixing the materials four times is the most suitable for the construction of deep mixing piles in organic clay. The solidifying agent deep mixing pile showed satisfactory early and late strength. Microscopic analysis showed that more calcium silicate hydrate and ettringite formed in the solidifying agent solidified soil. Organic clay particles were better cemented and pores were fully filled, so that the solidified soil showed an integral and dense structure. The microscopically integral and dense structure contributed to the excellent integrity and mechanical properties of the solidifying agent deep mixing pile.