Giorgio Pitruzzello

Aerial drone technology is currently being investigated worldwide for the delivery of blood components. Although it has been demonstrated to be safe, the delivered medical substances still need to be analyzed at the end of the flight mission to assess the level of haemolysis and pH prior to the use in a patient. This process can last up to 30 min and prevent the time saved using drone delivery. Our study aims to integrating an innovative sensor for the haemolysis and pH detection into the Smart Capsule, an already demonstrated technology capable of managing transfusion transport through drones. In the proposed scenario, the haemolysis is evaluated optically by a minilysis device using LED–photodetector combination. The preliminary validation has been demonstrated for both the thermal stability of the Smart Capsule and the haemolysis detection of the minilysis device prototype. Firstly, the onboard temperature test has shown that the delivery system is capable of maintaining proper temperature, even though the samples have been manipulated to reach a higher temperature before inserting into the Smart Capsule. Then, in the laboratory haemolysis test, the trend of linear regression between the outputs from the spectrophotometer and the minilysis prototype confirmed the concept design of the minilysis device.

This paper proposes a device of sensing that could be integrated into the instruments of any surgical robot. Despite advances in robot-assisted laparoscopic surgery, the tools currently supplied to surgical robots have limited functions, due to the absence of sensorization. With this motivation, we present a preliminary work based on the design, development, and early stages of experimentation with smart and multifunctional devices of sensing for surgical tools. The proposed device of sensing has a proximity sensor, colorimetric sensor, and BLE connection for different surgical instruments to connect to each other. The proximity feedback allows the surgeon to know the distance of the instrument from a particular tissue, to operate in conditions of greater safety. With the colorimetric feedback, on the other hand, we intend to proceed to the identification of specific tissue areas with characteristics that are not typical of the physiological tissue. The results show that the device is promising and can be further developed for multiple clinical needs in robotic procedures. This system can effectively increase the functionality of surgical instruments by overcoming the sensing limitations introduced by using robots in laparoscopic surgery.