Haopeng Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Haopeng Wang has a total of 110 co-authors. Here are the top co-authors by number of shared publications:
- Stefaan Poedts
KU Leuven
16 shared publications - Andrea Lani
Department of Mathematics/Centre for mathematical Plasma Astrophysics, KU Leuven
10 shared publications - Hyun-Jin Jeong
Centre for mathematical Plasma-Astrophysics, Department of Mathematics, KU Leuven, Celestijnenlaan 200B, 3001 Leuven, Belgium
9 shared publications - Tinatin Baratashvili
Department of Mathematics/Centre for mathematical Plasma Astrophysics, KU Leuven
9 shared publications - Brigitte Schmieder
Centre for mathematical Plasma Astrophysics, Department of Mathematics, KU Leuven
7 shared publications - Luis Linan
Centre for mathematical Plasma-Astrophysics, Department of Mathematics, KU Leuven, Celestijnenlaan 200B, 3001 Leuven, Belgium
6 shared publications
Latest Publications
- Open Access
- 29 October 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 714, A508
COCONUT: Towards practical time-evolving Sun-to-Earth magnetohydrodynamic modelling
Context . To enable timely protective actions against severe space weather, it is essential to develop advanced Sun-to-Earth magnetohydrodynamic (MHD) models to deliver faster-than-real-time, high-fidelity, and comprehensive space weather forecasts. Aims . For this study, we modelled the evolution of the solar corona and wind from the Sun to Earth using a stand-alone, time-evolving MHD model to show that an implicit MHD method can significantly simplify and improve the overall Sun-to-Earth modelling pipeline. Methods . We extended the implicit time-evolving coronal MHD model COCONUT up to 1 AU, and utilised it to investigate solar coronal and wind evolutions around a solar maximum Carrington rotation (CR). We compared quasi-steady-state and time-evolving Sun-to-Earth simulations to evaluate the impact of the inner-boundary magnetic field evolution, which is neglected in steady-state simulations, on background plasma parameters. Comparisons with commonly used coupled Sun-to-Earth simulations were also conducted to further validate and assess the Sun-to-Earth model COCONUT. Results . The results show that the time-evolving implicit MHD modelling approach yields noticeable differences compared with oversimplified steady-state simulations, while remaining sufficiently computationally efficient and numerically stable to model the entire Sun-to-Earth domain with a single model. This approach greatly simplifies the simulation pipeline and avoids uncertainties associated with coupling separate coronal and interplanetary heliospheric (IH) models. The noticeable differences in the temporal evolution of solutions at the L1 and L5 points highlight the need to use continuously evolving, synchronised magnetic field observations to improve global solar coronal and wind simulations. Meanwhile, the overall consistency in the temporal evolution of the simulated radial velocity and northward magnetic field, with lag-correlation coefficients of approximately 0.94 and 0.80 at lags of 108 and 100 hours, respectively, demonstrates the feasibility of using L5 observations to forecast background solar-wind conditions near Earth approximately 4–5 days in advance.
- 29 October 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 714, A508
Open AccessCOCONUT: Towards practical time-evolving Sun-to-Earth magnetohydrodynamic modelling
Context . To enable timely protective actions against severe space weather, it is essential to develop advanced Sun-to-Earth magnetohydrodynamic (MHD) models to deliver faster-than-real-time, high-fidelity, and comprehensive space weather forecasts. Aims . For this study, we modelled the evolution of the solar corona and wind from the Sun to Earth using a stand-alone, time-evolving MHD model to show that an implicit MHD method can significantly simplify and improve the overall Sun-to-Earth modelling pipeline. Methods . We extended the implicit time-evolving coronal MHD model COCONUT up to 1 AU, and utilised it to investigate solar coronal and wind evolutions around a solar maximum Carrington rotation (CR). We compared quasi-steady-state and time-evolving Sun-to-Earth simulations to evaluate the impact of the inner-boundary magnetic field evolution, which is neglected in steady-state simulations, on background plasma parameters. Comparisons with commonly used coupled Sun-to-Earth simulations were also conducted to further validate and assess the Sun-to-Earth model COCONUT. Results . The results show that the time-evolving implicit MHD modelling approach yields noticeable differences compared with oversimplified steady-state simulations, while remaining sufficiently computationally efficient and numerically stable to model the entire Sun-to-Earth domain with a single model. This approach greatly simplifies the simulation pipeline and avoids uncertainties associated with coupling separate coronal and interplanetary heliospheric (IH) models. The noticeable differences in the temporal evolution of solutions at the L1 and L5 points highlight the need to use continuously evolving, synchronised magnetic field observations to improve global solar coronal and wind simulations. Meanwhile, the overall consistency in the temporal evolution of the simulated radial velocity and northward magnetic field, with lag-correlation coefficients of approximately 0.94 and 0.80 at lags of 108 and 100 hours, respectively, demonstrates the feasibility of using L5 observations to forecast background solar-wind conditions near Earth approximately 4–5 days in advance.
- Open Access
- 14 October 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1010 (2) , 152
Qorona: Open, Model-agnostic Line-of-sight Rendering of the Perpendicular Squashing Factor for Eclipse-like Coronal Imaging
The fine structure of the white-light corona reflects the coronal magnetic topology, and the quasi-separatrix layers (QSLs), where the connectivity changes sharply and reconnection is expected to shape the density, are candidates for organizing it. In a coronal magnetohydrodynamic (MHD) model, the QSLs are located by the squashing factor Q , and integrating log 10 Q along the line-of-sight gives an eclipse-like image, a model-derived proxy for this structure, but no open-source tool dedicated to producing such images was previously available. To fill this gap, we present Qorona (a contraction of Q and corona; https://github.com/RayanDhib/Qorona ), an open-source Python package specifically designed to perform this rendering for any global coronal MHD solution using the perpendicular squashing factor Q ⊥ , the variant of Q that remains robust where field lines graze a boundary. Qorona is model-agnostic (a new model or file format requires only a reader) and fast: a field-line painting algorithm exploits the constancy of Q ⊥ along field lines to decouple volume resolution from tracing cost, and parallel CPU and GPU back ends build the volume in minutes. Because the volume is viewpoint-independent, a single build serves any number of cameras and a range of products beyond the eclipse image: polarity-colored and near-limb renders, a field-line view, and a synoptic signed- log 10 Q ⊥ map. The field-line tracer and Q ⊥ engine match the closed-form Q ⊥ of an analytic dipole to 10 −9 . We demonstrate the pipeline on a COCONUT coronal MHD simulation of the 2024 April 8 total solar eclipse: the three principal streamers of the synthetic Q ⊥ image lie within 7° in position angle of those observed.
- 14 October 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1010 (2) , 152
Open AccessQorona: Open, Model-agnostic Line-of-sight Rendering of the Perpendicular Squashing Factor for Eclipse-like Coronal Imaging
The fine structure of the white-light corona reflects the coronal magnetic topology, and the quasi-separatrix layers (QSLs), where the connectivity changes sharply and reconnection is expected to shape the density, are candidates for organizing it. In a coronal magnetohydrodynamic (MHD) model, the QSLs are located by the squashing factor Q , and integrating log 10 Q along the line-of-sight gives an eclipse-like image, a model-derived proxy for this structure, but no open-source tool dedicated to producing such images was previously available. To fill this gap, we present Qorona (a contraction of Q and corona; https://github.com/RayanDhib/Qorona ), an open-source Python package specifically designed to perform this rendering for any global coronal MHD solution using the perpendicular squashing factor Q ⊥ , the variant of Q that remains robust where field lines graze a boundary. Qorona is model-agnostic (a new model or file format requires only a reader) and fast: a field-line painting algorithm exploits the constancy of Q ⊥ along field lines to decouple volume resolution from tracing cost, and parallel CPU and GPU back ends build the volume in minutes. Because the volume is viewpoint-independent, a single build serves any number of cameras and a range of products beyond the eclipse image: polarity-colored and near-limb renders, a field-line view, and a synoptic signed- log 10 Q ⊥ map. The field-line tracer and Q ⊥ engine match the closed-form Q ⊥ of an analytic dipole to 10 −9 . We demonstrate the pipeline on a COCONUT coronal MHD simulation of the 2024 April 8 total solar eclipse: the three principal streamers of the synthetic Q ⊥ image lie within 7° in position angle of those observed.
- Open Access
- 7 October 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 714, A138
Revisiting magnetohydrodynamic modelling of the 2024 total solar eclipse with AI-reconstructed far-side photospheric field data
Context . Total solar eclipses provide high-quality white-light observations of the solar corona. They also provide valuable reference data for validating global three-dimensional magnetohydrodynamic (MHD) coronal models driven by photospheric magnetic field data. Aims . We aim to incorporate artificial intelligence (AI)-reconstructed solar far-side photospheric magnetic fields into global MHD coronal modelling of the 8 April 2024 eclipse and explore their effects on the resulting coronal structures. Methods . The far-side magnetic fields from 8 April 2024 were reconstructed using an AI-based model that takes front-side solar magnetic field data obtained at the nearest available times before and after the eclipse as input. We replaced the far-side regions in conventional maps with the reconstructed data and used these maps as inner boundary conditions for the COCONUT model. We compared the resulting coronal structures from maps with and without the AI-reconstructed data with total solar eclipse and coronagraph observations, including the spatial distribution of coronal streamers and magnetic field lines. Results . The maps with AI-reconstructed data better represent far-side active regions (ARs) that emerge during a solar rotation compared to the conventional data. The model driven by the reconstructed data shows consistency with the observed coronal streamer structures, albeit with some differences. During the total eclipse, large far-side ARs contribute to notable differences in coronal modelling results in the eastern solar region, as indicated by comparisons between our model and the conventional methods, as well as comparisons using magnetic field data from several days after 8 April 2024. Conclusions . This study represents the first attempt to incorporate AI-reconstructed far-side photospheric magnetic fields derived from the nearest available front-side data into global MHD coronal simulations. Our results indicate that emerging far-side magnetic fields influence the distribution of large-scale coronal structures, highlighting the importance of including far-side magnetic field evolution in the inner boundary conditions.
- 7 October 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 714, A138
Open AccessRevisiting magnetohydrodynamic modelling of the 2024 total solar eclipse with AI-reconstructed far-side photospheric field data
Context . Total solar eclipses provide high-quality white-light observations of the solar corona. They also provide valuable reference data for validating global three-dimensional magnetohydrodynamic (MHD) coronal models driven by photospheric magnetic field data. Aims . We aim to incorporate artificial intelligence (AI)-reconstructed solar far-side photospheric magnetic fields into global MHD coronal modelling of the 8 April 2024 eclipse and explore their effects on the resulting coronal structures. Methods . The far-side magnetic fields from 8 April 2024 were reconstructed using an AI-based model that takes front-side solar magnetic field data obtained at the nearest available times before and after the eclipse as input. We replaced the far-side regions in conventional maps with the reconstructed data and used these maps as inner boundary conditions for the COCONUT model. We compared the resulting coronal structures from maps with and without the AI-reconstructed data with total solar eclipse and coronagraph observations, including the spatial distribution of coronal streamers and magnetic field lines. Results . The maps with AI-reconstructed data better represent far-side active regions (ARs) that emerge during a solar rotation compared to the conventional data. The model driven by the reconstructed data shows consistency with the observed coronal streamer structures, albeit with some differences. During the total eclipse, large far-side ARs contribute to notable differences in coronal modelling results in the eastern solar region, as indicated by comparisons between our model and the conventional methods, as well as comparisons using magnetic field data from several days after 8 April 2024. Conclusions . This study represents the first attempt to incorporate AI-reconstructed far-side photospheric magnetic fields derived from the nearest available front-side data into global MHD coronal simulations. Our results indicate that emerging far-side magnetic fields influence the distribution of large-scale coronal structures, highlighting the importance of including far-side magnetic field evolution in the inner boundary conditions.
- Open Access
- 11 September 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1009 (1) , 27
Statistical Analysis of Coronal Hole Spatiotemporal Evolution, Kinematics, and Lifetimes over 1.5 Solar Cycles
Coronal holes (CHs) are fundamental solar features and the primary source of high-speed solar wind, yet their long-term statistical properties remain insufficiently constrained. In this study, we leverage the Detection and Tracking Algorithm for Coronal Holes (DETACH) to construct an unprecedented 12 hr resolution CH dataset spanning 1.5 solar cycles (2010–2025) using Solar Dynamics Observatory (SDO) observations. Based on this comprehensive database, we conduct a rigorous statistical analysis of CH spatiotemporal evolution, kinematics, and lifetime dependencies. First, we reveal a prominent north–south asymmetry in various CH physical parameters, including area, magnetic flux, and magnetic field strength, providing observational constraints for hemispheric decoupling in solar dynamo models. Second, kinematic analysis demonstrates that CHs do not rotate as perfectly rigid bodies; rather, they exhibit a distinct differential rotation, albeit with a significantly smaller latitudinal gradient compared to the underlying photosphere. Furthermore, by employing survival analysis, we systematically decouple the factors influencing CH lifetimes. We find that the CH area and unsigned magnetic field strength positively correlate with lifetime, whereas extreme ultraviolet (EUV) intensity, rotation speed, and absolute latitude exhibit negative correlations with lifetime. These findings not only confirm previous theoretical and localized observational studies but also provide a robust statistical foundation for understanding large-scale CH evolution and improving space weather forecasting.
- 11 September 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1009 (1) , 27
Open AccessStatistical Analysis of Coronal Hole Spatiotemporal Evolution, Kinematics, and Lifetimes over 1.5 Solar Cycles
Coronal holes (CHs) are fundamental solar features and the primary source of high-speed solar wind, yet their long-term statistical properties remain insufficiently constrained. In this study, we leverage the Detection and Tracking Algorithm for Coronal Holes (DETACH) to construct an unprecedented 12 hr resolution CH dataset spanning 1.5 solar cycles (2010–2025) using Solar Dynamics Observatory (SDO) observations. Based on this comprehensive database, we conduct a rigorous statistical analysis of CH spatiotemporal evolution, kinematics, and lifetime dependencies. First, we reveal a prominent north–south asymmetry in various CH physical parameters, including area, magnetic flux, and magnetic field strength, providing observational constraints for hemispheric decoupling in solar dynamo models. Second, kinematic analysis demonstrates that CHs do not rotate as perfectly rigid bodies; rather, they exhibit a distinct differential rotation, albeit with a significantly smaller latitudinal gradient compared to the underlying photosphere. Furthermore, by employing survival analysis, we systematically decouple the factors influencing CH lifetimes. We find that the CH area and unsigned magnetic field strength positively correlate with lifetime, whereas extreme ultraviolet (EUV) intensity, rotation speed, and absolute latitude exhibit negative correlations with lifetime. These findings not only confirm previous theoretical and localized observational studies but also provide a robust statistical foundation for understanding large-scale CH evolution and improving space weather forecasting.
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
EGU LUNEX 2026 Total Solar Eclipse Campaign in Spain: Early Career Scientist Multiwavelength Observations and Outreach
The total solar eclipse of 12 August 2026, visible along a path crossing the Russian Arctic, Greenland, Iceland, Portugal, and Spain, will provide an exceptional opportunity for both scientific observations and public engagement. As part of a broader observing campaign [1] (that includes observations from various sites along the path), a group of early career scientists will conduct a set of complementary experiments aimed at obtaining scientifically useful measurements, engaging wider society, and preparing observational strategies for the 2027 total solar eclipse. The optical experiments will include white light imaging of the solar corona using telescopes with different focal lengths. Our wide field setup will be used to image the corona from our observing site during totality. These observations will later be combined with measurements obtained by other sites within the broader campaign, enabling multi-site image stacking and the construction of a temporal sequence of the corona during totality [1,2]. A longer focal length setup will be used to carry out a modern version of the Einstein–Eddington experiment by measuring the apparent positional shifts of stars close to the eclipsed Sun, caused by gravitational light deflection. In addition, sky spectra will be recorded at different eclipse phases to study how the integrated sky spectrum changes as direct photospheric light is suppressed and the corona becomes visible [3,4]. The campaign will also include ionospheric experiments using radio observations and GNSS based measurements. Very low frequency and low frequency radio receivers will monitor stable transmitters before, during, and after the eclipse. Changes in received signal strength and propagation conditions can be used to probe eclipse driven changes in the ionosphere caused by reduced solar ionization. In parallel, GNSS data from personal phones and, where available, dedicated receivers will be collected to investigate possible changes in signal strength, positioning residuals, and ionospheric delay proxies. These measurements will be designed as a citizen science activity, allowing the public to contribute geographically distributed data. The observing site and activities will be announced publicly. Outreach will include safe solar viewing, solar projection demonstrations, sunspot observations, distribution of eclipse glasses, and explanations of the science behind the experiments [2,5]. In this way, the campaign will combine eclipse science, public participation, and training for future total eclipse observations. References:[1] Schmieder, B., Baratashvili, T., Poedts, S., Lani, A., Wang, H., Foing, B., Sansari, S., Zeegers, S., Pascual, J., Nahum, R., Nagainis, K., Gomez de Castro, A. I., and Heras, A.: Total Eclipse on August 12, 2026: observations in Spain and prediction with COCONUT, EGU General Assembly 2026, Vienna, Austria, 3–8 May 2026, EGU26-1542, https://doi.org/10.5194/egusphere-egu26-1542, 2026.[2] European Space Agency, “Solar Total Eclipse 1999,” ESA Science & Technology, 1999. Available: https://sci.esa.int/web/observational-astronomy/-/38064-total-eclipse-99[3] B. H. Foing, L. Duvet, L. Ligot, J. Oliveira, T. Beaufort, J. E. Wiik, B. Altieri, N. Henrich, S. Cravatte, and E. Maurice, “Results from the 3 November 1994 Solar Eclipse: Density and Temperature Variations in Streamers and Coronal Holes,” in The Tenth Cambridge Workshop on Cool Stars, Stellar Systems and the Sun, ASP Conference Series, vol. 154, R. A. Donahue and J. A. Bookbinder, Eds. San Francisco, CA: Astronomical Society of the Pacific, 1998, p. 1035.[4] B. H. Foing, L. Duvet, K. Muglach, J. E. Wiik, T. Beaufort, and E. Maurice, “Polar plumes and streamers from 1994 and 1998 eclipses,” in Solar Jets and Coronal Plumes, ESA SP-421, 1998, p. 273.[5] European Space Agency, “Solar Eclipse Index,” ESA Multimedia, 1 July 1999. Available: https://www.esa.int/ESA_Multimedia/Videos/1999/07/Solar_Eclipse_Index
- 2 July 2026
- Published by Copernicus GmbH
Open AccessEGU LUNEX 2026 Total Solar Eclipse Campaign in Spain: Early Career Scientist Multiwavelength Observations and Outreach
The total solar eclipse of 12 August 2026, visible along a path crossing the Russian Arctic, Greenland, Iceland, Portugal, and Spain, will provide an exceptional opportunity for both scientific observations and public engagement. As part of a broader observing campaign [1] (that includes observations from various sites along the path), a group of early career scientists will conduct a set of complementary experiments aimed at obtaining scientifically useful measurements, engaging wider society, and preparing observational strategies for the 2027 total solar eclipse. The optical experiments will include white light imaging of the solar corona using telescopes with different focal lengths. Our wide field setup will be used to image the corona from our observing site during totality. These observations will later be combined with measurements obtained by other sites within the broader campaign, enabling multi-site image stacking and the construction of a temporal sequence of the corona during totality [1,2]. A longer focal length setup will be used to carry out a modern version of the Einstein–Eddington experiment by measuring the apparent positional shifts of stars close to the eclipsed Sun, caused by gravitational light deflection. In addition, sky spectra will be recorded at different eclipse phases to study how the integrated sky spectrum changes as direct photospheric light is suppressed and the corona becomes visible [3,4]. The campaign will also include ionospheric experiments using radio observations and GNSS based measurements. Very low frequency and low frequency radio receivers will monitor stable transmitters before, during, and after the eclipse. Changes in received signal strength and propagation conditions can be used to probe eclipse driven changes in the ionosphere caused by reduced solar ionization. In parallel, GNSS data from personal phones and, where available, dedicated receivers will be collected to investigate possible changes in signal strength, positioning residuals, and ionospheric delay proxies. These measurements will be designed as a citizen science activity, allowing the public to contribute geographically distributed data. The observing site and activities will be announced publicly. Outreach will include safe solar viewing, solar projection demonstrations, sunspot observations, distribution of eclipse glasses, and explanations of the science behind the experiments [2,5]. In this way, the campaign will combine eclipse science, public participation, and training for future total eclipse observations. References:[1] Schmieder, B., Baratashvili, T., Poedts, S., Lani, A., Wang, H., Foing, B., Sansari, S., Zeegers, S., Pascual, J., Nahum, R., Nagainis, K., Gomez de Castro, A. I., and Heras, A.: Total Eclipse on August 12, 2026: observations in Spain and prediction with COCONUT, EGU General Assembly 2026, Vienna, Austria, 3–8 May 2026, EGU26-1542, https://doi.org/10.5194/egusphere-egu26-1542, 2026.[2] European Space Agency, “Solar Total Eclipse 1999,” ESA Science & Technology, 1999. Available: https://sci.esa.int/web/observational-astronomy/-/38064-total-eclipse-99[3] B. H. Foing, L. Duvet, L. Ligot, J. Oliveira, T. Beaufort, J. E. Wiik, B. Altieri, N. Henrich, S. Cravatte, and E. Maurice, “Results from the 3 November 1994 Solar Eclipse: Density and Temperature Variations in Streamers and Coronal Holes,” in The Tenth Cambridge Workshop on Cool Stars, Stellar Systems and the Sun, ASP Conference Series, vol. 154, R. A. Donahue and J. A. Bookbinder, Eds. San Francisco, CA: Astronomical Society of the Pacific, 1998, p. 1035.[4] B. H. Foing, L. Duvet, K. Muglach, J. E. Wiik, T. Beaufort, and E. Maurice, “Polar plumes and streamers from 1994 and 1998 eclipses,” in Solar Jets and Coronal Plumes, ESA SP-421, 1998, p. 273.[5] European Space Agency, “Solar Eclipse Index,” ESA Multimedia, 1 July 1999. Available: https://www.esa.int/ESA_Multimedia/Videos/1999/07/Solar_Eclipse_Index
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
HERMES: Highly Efficient and quasi-Realistic Modeling of coronal mass Ejections in a time-evolving Solar-terrestrial background
To enable timely action in mitigating damage from severe space weather events, there is an urgent need for advanced Sun-to-Earth MHD models capable of delivering timely, high-fidelity, and comprehensive space weather forecasts. Recently, the numerical stability of the time-evolving coronal MHD models COCONUT and SIP-IFVM have been significantly improved by the energy decomposition strategy and the extended magnetic field decomposition methods, respectively. The implicit temporal integrations, with Newton iterations or pseudo–time marching method performed within each time step, enables high computational efficiency with desired temporal accuracy. Several observation-based coronal evolution and CME propagation simulations further demonstrate that these methods collaboratively achieve an effective balance between high computational efficiency, numerical stability, and modeling accuracy. Currently, we further go to the planetary space by directly extending our coronal models to 1 AU or coupling the coronal model with an inner heliosphere model. Based on the faster-than-real-time time-evolving solar-terrestrial MHD model, we are performing CME propagation simulations in the time-evolving solar-terrestrial plasma background, rather than the usually adopted quasi-static background. We will report on the algorithm innovations we recently made for improving the performance of MHD coronal models and CME simulations. We will also discuss the impact of temporal variations in the coronal and solar wind background on CME propagation, as well as the effects of the interface introduced by coupling separately run coronal and inner heliosphere models, a common practice adopted to simplify parameter adjustment and reduce computational cost. These algorithmic innovations and resulting findings provide an opportunity to develop more reliable Sun-to-Earth MHD models suitable for practical CME simulations.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessHERMES: Highly Efficient and quasi-Realistic Modeling of coronal mass Ejections in a time-evolving Solar-terrestrial background
To enable timely action in mitigating damage from severe space weather events, there is an urgent need for advanced Sun-to-Earth MHD models capable of delivering timely, high-fidelity, and comprehensive space weather forecasts. Recently, the numerical stability of the time-evolving coronal MHD models COCONUT and SIP-IFVM have been significantly improved by the energy decomposition strategy and the extended magnetic field decomposition methods, respectively. The implicit temporal integrations, with Newton iterations or pseudo–time marching method performed within each time step, enables high computational efficiency with desired temporal accuracy. Several observation-based coronal evolution and CME propagation simulations further demonstrate that these methods collaboratively achieve an effective balance between high computational efficiency, numerical stability, and modeling accuracy. Currently, we further go to the planetary space by directly extending our coronal models to 1 AU or coupling the coronal model with an inner heliosphere model. Based on the faster-than-real-time time-evolving solar-terrestrial MHD model, we are performing CME propagation simulations in the time-evolving solar-terrestrial plasma background, rather than the usually adopted quasi-static background. We will report on the algorithm innovations we recently made for improving the performance of MHD coronal models and CME simulations. We will also discuss the impact of temporal variations in the coronal and solar wind background on CME propagation, as well as the effects of the interface introduced by coupling separately run coronal and inner heliosphere models, a common practice adopted to simplify parameter adjustment and reduce computational cost. These algorithmic innovations and resulting findings provide an opportunity to develop more reliable Sun-to-Earth MHD models suitable for practical CME simulations.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Total Eclipse on August 12, 2026: observations in Spain and prediction with COCONUT
Because of the lack of white light coronagraph observations in the low solar corona (1-1.5 solar radius), total solar eclipses are a standard way of assessing coronal structures and testing coronal models. Total solar eclipses constrain the validation period of coronal modelling, as they occur rarely. However, currently, it is the only way to distinguish features in the low corona near the solar surface. Soon, the PROBA 3 mission will provide continuous observations of the low corona. Total solar eclipses provide a single snapshot of the solar corona, whereas time-dependent simulations require continuous white-light observations.COCONUT was utilised to predict the previous total solar eclipse in April 2024 (Baratashvili et al. 2025, A&A, in press). In the setup demonstrated in the manuscript, a low-resolution, simplified approach is used. However, multiple developments in the COCONUT model since the previous total solar eclipse allow the continuous time-dependent and high resolution simulations (Wang et al, 2025, in press) for the predictions on the upcoming total solar eclipse on August 12, 2026, at 18:27 UT. Additionally, we plan a network of observations in Spain with multiple sites (Santiago Compostela, Teruel, Villadolid, Riga) to obtain the best coverage of the total solar eclipse and obtain high-quality images to use them for validating the predictions performed by the COCONUT model. Synthetic white-light images will be generated from the COCONUT simulations to compare to the observed images directly.This way we can use the total solar eclipse on August 12, 2026, to validate the COCONUT model, and identify its strengths and weaknesses.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessTotal Eclipse on August 12, 2026: observations in Spain and prediction with COCONUT
Because of the lack of white light coronagraph observations in the low solar corona (1-1.5 solar radius), total solar eclipses are a standard way of assessing coronal structures and testing coronal models. Total solar eclipses constrain the validation period of coronal modelling, as they occur rarely. However, currently, it is the only way to distinguish features in the low corona near the solar surface. Soon, the PROBA 3 mission will provide continuous observations of the low corona. Total solar eclipses provide a single snapshot of the solar corona, whereas time-dependent simulations require continuous white-light observations.COCONUT was utilised to predict the previous total solar eclipse in April 2024 (Baratashvili et al. 2025, A&A, in press). In the setup demonstrated in the manuscript, a low-resolution, simplified approach is used. However, multiple developments in the COCONUT model since the previous total solar eclipse allow the continuous time-dependent and high resolution simulations (Wang et al, 2025, in press) for the predictions on the upcoming total solar eclipse on August 12, 2026, at 18:27 UT. Additionally, we plan a network of observations in Spain with multiple sites (Santiago Compostela, Teruel, Villadolid, Riga) to obtain the best coverage of the total solar eclipse and obtain high-quality images to use them for validating the predictions performed by the COCONUT model. Synthetic white-light images will be generated from the COCONUT simulations to compare to the observed images directly.This way we can use the total solar eclipse on August 12, 2026, to validate the COCONUT model, and identify its strengths and weaknesses.
- Top Cited PapersOpen Access
- 15 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A145
Modelling the total solar eclipse in 2024 with COCONUT
Context. Coronal modelling is crucial for a better understanding of solar physics and heliophysics. Accurate plasma conditions at the outer boundary of a solar corona lead to more precise space weather predictions. Because the Sun is so very bright and we lack white-light (WL) observations of the solar atmosphere and low corona (1–1.5 R ⊙ ), total solar eclipses have become a standard approach for validating the coronal models. We validate the coronal model COCONUT by predicting the coronal configuration during the total solar eclipse on April 8, 2024. Aims. We aim to predict the accurate configuration of the solar corona during the total solar eclipse on April 8, 2024. Additionally, we compare the predictive capabilities in the steady and dynamic driving of the boundary conditions in COCONUT. We used a full 3D magnetohydrodynamics (MHD) model to reconstruct the solar corona from the solar surface to 30 R ⊙ . Methods. We started by predicting the upcoming total solar eclipse on March 21. The predictions were conducted in three different regimes: quasi-steady driving of the inner boundary conditions (BCs) with a daily cadence, and dynamic driving of the inner BCs with daily and hourly cadences. The results from all the simulations were compared to the total solar eclipse images. Additionally, the synthetic WL images were generated from the Solar Terrestrial Relations Observatory Ahead (STEREO-A) field of view and compared to COR2 observed images. The normalised polarised brightness was compared in the COR2 and synthetic WL images. Results. The predicted solar corona does not vary significantly in the first half of the prediction window because the observations of the magnetic field are not yet accurately updated on the solar surface corresponding to April 8. The magnetic field changes more significantly as the eclipse date approaches. The dynamic simulations yielded better results than the quasi-steady predictions. Driving the simulations at a higher cadence did not significantly improve the results because the magnetic field maps are highly processed. The west limb was better reconstructed in the simulations than the east limb. Conclusions. We predicted the total solar eclipse coronal configuration 18 days before the total solar eclipse. We conclude that the dynamic simulations produced more accurate predictions. The availability of comprehensive observations is crucial because the emergence of the active region on the east limb made it difficult to accurately predict the east-limb coronal configuration because the input of the magnetic field data was incorrect. More detailed input BCs are necessary for reconstructing smaller-scale structures in the corona.
- 15 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A145
Top Cited PapersOpen AccessModelling the total solar eclipse in 2024 with COCONUT
Context. Coronal modelling is crucial for a better understanding of solar physics and heliophysics. Accurate plasma conditions at the outer boundary of a solar corona lead to more precise space weather predictions. Because the Sun is so very bright and we lack white-light (WL) observations of the solar atmosphere and low corona (1–1.5 R ⊙ ), total solar eclipses have become a standard approach for validating the coronal models. We validate the coronal model COCONUT by predicting the coronal configuration during the total solar eclipse on April 8, 2024. Aims. We aim to predict the accurate configuration of the solar corona during the total solar eclipse on April 8, 2024. Additionally, we compare the predictive capabilities in the steady and dynamic driving of the boundary conditions in COCONUT. We used a full 3D magnetohydrodynamics (MHD) model to reconstruct the solar corona from the solar surface to 30 R ⊙ . Methods. We started by predicting the upcoming total solar eclipse on March 21. The predictions were conducted in three different regimes: quasi-steady driving of the inner boundary conditions (BCs) with a daily cadence, and dynamic driving of the inner BCs with daily and hourly cadences. The results from all the simulations were compared to the total solar eclipse images. Additionally, the synthetic WL images were generated from the Solar Terrestrial Relations Observatory Ahead (STEREO-A) field of view and compared to COR2 observed images. The normalised polarised brightness was compared in the COR2 and synthetic WL images. Results. The predicted solar corona does not vary significantly in the first half of the prediction window because the observations of the magnetic field are not yet accurately updated on the solar surface corresponding to April 8. The magnetic field changes more significantly as the eclipse date approaches. The dynamic simulations yielded better results than the quasi-steady predictions. Driving the simulations at a higher cadence did not significantly improve the results because the magnetic field maps are highly processed. The west limb was better reconstructed in the simulations than the east limb. Conclusions. We predicted the total solar eclipse coronal configuration 18 days before the total solar eclipse. We conclude that the dynamic simulations produced more accurate predictions. The availability of comprehensive observations is crucial because the emergence of the active region on the east limb made it difficult to accurately predict the east-limb coronal configuration because the input of the magnetic field data was incorrect. More detailed input BCs are necessary for reconstructing smaller-scale structures in the corona.
- Open Access
- 1 December 2025
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 281 (2) , 63
Artificial-intelligence-based Reconstruction of Solar Farside Vector Magnetograms from Multispacecraft Extreme-ultraviolet Data
In this study, we generate full-disk vector magnetic field data of the solar farside, as viewed from the Solar Terrestrial Relations Observatory-Ahead (STEREO-A), Solar Terrestrial Relations Observatory-Behind (STEREO-B), and Solar Orbiter (SolO), using a deep learning model based on the Pix2PixCC architecture. Our model takes extreme-ultraviolet (EUV) 304 and 171 Å images, together with reference magnetic field data from a surface flux transport (SFT) model, as inputs. To train and evaluate the model, we use EUV images from the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly and SFT-predicted magnetic field data from one solar rotation earlier as inputs, and we use vector magnetograms from the SDO/Helioseismic and Magnetic Imager (HMI) as targets. For frontside test datasets covering Solar Cycles 24 and 25, our model successfully generates all three vector magnetic field components consistent with those from SDO/HMI, showing improved performance compared with previous studies. We then generate vector magnetic field data by applying the trained model to EUV observations from STEREO-A and SolO. For the first time, we compare the artificial intelligence (AI)-generated results with corresponding SDO/HMI data obtained when STEREO-A and SolO were near inferior conjunction with SDO in 2023 and 2022, respectively. We also track active-region magnetic fields and derive vector magnetic parameters using AI-generated farside data from STEREO-A, STEREO-B, and SolO, along with frontside SDO/HMI data. These results demonstrate the potential for continuous monitoring of solar vector magnetic fields and derived parameters from the farside to the frontside using AI-generated and SDO/HMI data.
- 1 December 2025
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 281 (2) , 63
Open AccessArtificial-intelligence-based Reconstruction of Solar Farside Vector Magnetograms from Multispacecraft Extreme-ultraviolet Data
In this study, we generate full-disk vector magnetic field data of the solar farside, as viewed from the Solar Terrestrial Relations Observatory-Ahead (STEREO-A), Solar Terrestrial Relations Observatory-Behind (STEREO-B), and Solar Orbiter (SolO), using a deep learning model based on the Pix2PixCC architecture. Our model takes extreme-ultraviolet (EUV) 304 and 171 Å images, together with reference magnetic field data from a surface flux transport (SFT) model, as inputs. To train and evaluate the model, we use EUV images from the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly and SFT-predicted magnetic field data from one solar rotation earlier as inputs, and we use vector magnetograms from the SDO/Helioseismic and Magnetic Imager (HMI) as targets. For frontside test datasets covering Solar Cycles 24 and 25, our model successfully generates all three vector magnetic field components consistent with those from SDO/HMI, showing improved performance compared with previous studies. We then generate vector magnetic field data by applying the trained model to EUV observations from STEREO-A and SolO. For the first time, we compare the artificial intelligence (AI)-generated results with corresponding SDO/HMI data obtained when STEREO-A and SolO were near inferior conjunction with SDO in 2023 and 2022, respectively. We also track active-region magnetic fields and derive vector magnetic parameters using AI-generated farside data from STEREO-A, STEREO-B, and SolO, along with frontside SDO/HMI data. These results demonstrate the potential for continuous monitoring of solar vector magnetic fields and derived parameters from the farside to the frontside using AI-generated and SDO/HMI data.
- Open Access
- 1 October 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 702, A37
Time-evolving coronal modelling of the solar maximum around the solar storms in May 2024 by COCONUT
Context. Time-evolving magnetohydrodynamic (MHD) coronal models driven by a sequence of time-evolving photospheric magnetograms deliver more realistic results than traditional quasi-steady-state models constrained by a static magnetogram. The fully implicit time-evolving coronal model COCONUT performs efficiently enough for real-time coronal simulations during solar minimum. Significant challenges persist in modelling the more complex coronal evolutions of solar maximum scenarios, however. Aims. During solar maxima, the coronal magnetic field is more complex and stronger, and coronal structures evolve more rapidly than during solar minima. Consequently, time-evolving MHD coronal modelling of solar maxima often struggles with poor numerical stability and low computational efficiency. We enhanced the numerical stability of the time-evolving coronal model COCONUT to mitigate these issues with the aim to evaluate the differences between the time-evolving and quasi-steady-state coronal simulation results, and to assess the impact of the spatial resolution on global MHD coronal modelling of solar maxima. Methods. After enhancing the positivity-preserving property of the time-evolving coronal model COCONUT, we employed it to simulate the evolution of coronal structures from the solar surface to 0.1 AU in an inertial coordinate system over two Carrington rotations around the solar storms in May 2024. These simulations were performed on unstructured geodesic meshes containing 6.06, 1.52, and 0.38 million (M) cells to assess the impact of grid resolution. We also conducted a quasi-steady-state coronal simulation that treated the solar surface as a rigidly rotating spherical shell to demonstrate the impact of the emergence and cancellation of the magnetic flux in global coronal simulations. A comparison with observations further validated the reliability of the efficient time-evolving coronal modelling technique. Results. We demonstrate that incorporating the evolution of the magnetic field in the inner boundary conditions can significantly improve the fidelity of global MHD coronal simulations around a solar maximum. A simulated magnetic field strength using a refined mesh with 6.06 M cells can be stronger by more than 40% than that in a coarser mesh with 0.38 M cells. A time step of 5 minutes and a mesh containing 1.5 M cells can effectively capture the evolution of large-scale coronal structures and small-sized dipoles. Thus, the fully implicit time-evolving model COCONUT shows promise for accurately conducting real-time global coronal simulations of solar maxima. This makes it suitable for practical applications such as daily space-weather forecasting.
- 1 October 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 702, A37
Open AccessTime-evolving coronal modelling of the solar maximum around the solar storms in May 2024 by COCONUT
Context. Time-evolving magnetohydrodynamic (MHD) coronal models driven by a sequence of time-evolving photospheric magnetograms deliver more realistic results than traditional quasi-steady-state models constrained by a static magnetogram. The fully implicit time-evolving coronal model COCONUT performs efficiently enough for real-time coronal simulations during solar minimum. Significant challenges persist in modelling the more complex coronal evolutions of solar maximum scenarios, however. Aims. During solar maxima, the coronal magnetic field is more complex and stronger, and coronal structures evolve more rapidly than during solar minima. Consequently, time-evolving MHD coronal modelling of solar maxima often struggles with poor numerical stability and low computational efficiency. We enhanced the numerical stability of the time-evolving coronal model COCONUT to mitigate these issues with the aim to evaluate the differences between the time-evolving and quasi-steady-state coronal simulation results, and to assess the impact of the spatial resolution on global MHD coronal modelling of solar maxima. Methods. After enhancing the positivity-preserving property of the time-evolving coronal model COCONUT, we employed it to simulate the evolution of coronal structures from the solar surface to 0.1 AU in an inertial coordinate system over two Carrington rotations around the solar storms in May 2024. These simulations were performed on unstructured geodesic meshes containing 6.06, 1.52, and 0.38 million (M) cells to assess the impact of grid resolution. We also conducted a quasi-steady-state coronal simulation that treated the solar surface as a rigidly rotating spherical shell to demonstrate the impact of the emergence and cancellation of the magnetic flux in global coronal simulations. A comparison with observations further validated the reliability of the efficient time-evolving coronal modelling technique. Results. We demonstrate that incorporating the evolution of the magnetic field in the inner boundary conditions can significantly improve the fidelity of global MHD coronal simulations around a solar maximum. A simulated magnetic field strength using a refined mesh with 6.06 M cells can be stronger by more than 40% than that in a coarser mesh with 0.38 M cells. A time step of 5 minutes and a mesh containing 1.5 M cells can effectively capture the evolution of large-scale coronal structures and small-sized dipoles. Thus, the fully implicit time-evolving model COCONUT shows promise for accurately conducting real-time global coronal simulations of solar maxima. This makes it suitable for practical applications such as daily space-weather forecasting.