Duo Zhang has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dynamic Hard-Shoulder Running Control for Expressways Based on an SIR-T Model: Advancing Sustainable Traffic Management

    by Xiaopeng Song, Sheng Jin, Dianhai Wang, Xiangyu Li, Duo Zhang

    With the continuing growth of expressway travel demand, recurrent congestion frequently occurs on selected expressway sections during peak periods. Conventional fixed-threshold strategies for hard-shoulder running have difficulty maintaining a dynamic balance between congestion mitigation, safety-related operational considerations, and lane-resource utilization. This study proposes an SIR-T (Traffic) state-evolution model for hard-shoulder opening and closing decisions. Traffic operation is represented by three normalized states, namely, free flow or congestion susceptibility (Susceptible, S), congestion formation and propagation (Infected, I), and congestion recovery (Recovered, R). The state-transition equations describe the effective congestion propagation rate, recovery transition rate, and time-dependent return rate. Literature-informed and section-specific baseline parameters are adopted, while hourly electronic toll collection (ETC) gantry traffic volumes from the Zhejiang G-YZ Expressway are used as the time-varying demand input for numerical integration. Dynamic opening and closing conditions are then derived and evaluated in SUMO by comparing the proposed control strategy with static opening and no-opening strategies. The results show that the proposed dynamic control strategy can adaptively adjust the hard-shoulder opening period in response to real-time traffic conditions, reduce unnecessary occupation of shoulder resources, and maintain traffic service performance close to that of static opening while producing fewer lane changes; compared with no opening, it also reduces average travel time and increases total arrivals.


  • Parallel-Computing-Based Calibration for Microscopic Traffic Simulation Model

    by Lanyue Tang, Duo Zhang, Yu Han, Aohui Fu, He Zhang, Ye Tian, Lishengsa Yue, Di Wang, Jian Sun

    Microscopic traffic simulation is vital to assess the performances of various traffic operation and management schemes. Microscopic traffic simulation is usually not parameter-free, and it relies on independent parameters to predict traffic evolution. Thus, parameter calibration is indispensable to conveying trustworthy simulation results. Heuristic algorithms are widely used for parameter calibration. Its logic is for achieving iterative optimization through continuous trial-and-error simulations. This process is time-consuming and usually takes several hours, making the calibration unable to meet the requirements of speed and efficiency. In recent years, parallel computing technology has been gradually applied in the engineering realm, which makes rapid calibration possible. Following the three steps of parallel framework selection, algorithm bottleneck identification, and subtask load balancing, this paper designs and implements the parallelization of genetic algorithm and particle swarm optimization (PSO) calibration algorithms. Finally, the proposed parallel framework is applied to simulation parameter calibration of a section of a 5 km long highway in Australia, and the effectiveness of parallel computing is evaluated from the two dimensions of reduction in calibration computational time and scalability. The results show that the proposed parallel calibration algorithm can shorten the 5 h calibration process to less than 1 h, reducing the calibration time by 80%. The parallel PSO calibration algorithm has better scalability, and its acceleration effect is better when more processors are used.


  • Real-time driving risk assessment based on the psycho-physical field

    by Duo Zhang, Jian Sun, Junhua Wang, Rongjie Yu

    Real-time Driving Risk Assessment (RDRA) is a critical component of traffic safety and is influenced by confounding impacts from drivers, surrounding vehicles, and roadway conditions. Previous studies simplified the RDRA based on kinematic characteristics. However, drivers perceived the risks not only through kinematic characteristics but also by anticipating the behaviors of surrounding participants and execute collision-preventive maneuvers. In this study, an innovative RDRA framework based on the Psycho-Physical Field (PPF) is proposed. Specifically, the PPF of the subjective vehicle exerts repulsive forces on intrusive risk sources in different directions, of which the two-dimensional field distribution is determined by physical collision-related measures and regulated by the psychological characteristics of behavior anticipations and risk perception abilities. The proposed method was first analyzed through theoretical feasibility analyses and verified for over 450 high-risk events from naturalistic driving data, including three typical types of scenarios: car-following, lane-changing, and being cut-in/off. Moreover, the adaptability was further validated through three cases and compared with the risk warning functions of Mobileye. The results showed that the proposed method can provide accurate risk evaluations, and identify potential hazards about 2 s in advance for high-risk cut-in events.


  • Open Access

    Focusing on Driving Modes Rather Than Drivers: Toward More Precise and Efficient Car-Following Behavior Modeling

    by Duo Zhang, Hongyu Rao, Junhua Wang, Jian Sun, Lishengsa Yue

    Car-following (CF) behavior is one of the most important driving behaviors. Accurately understanding and modeling CF behavior is essential for traffic flow simulation and user-acceptable advanced driving assistance systems (ADASs). In previous decades, CF models were calibrated based on drivers or trajectories, with short-term changes ignored. Recent studies have indicated that these changes could be caused by occasional irritations or regular switches of driving modes, but there is still a lack of specific understanding of driving modes and how these modes affect simulation accuracy in the reproduction of CF behavior. This paper explored the existence of driving modes and the quantified modeling influence of driving modes. Specifically, we first extracted 4000 high-resolution CF events of 40 drivers from large-scale naturalistic driving data for the discovery of underlying driving modes. Then, we introduced a novel multivariate time series method, Toeplitz Inverse Covariance-based Clustering (TICC), to achieve the segmentation and classification extraction of different driving modes. Finally, calibrated by the CF dataset, the proper cluster number of the driving mode was determined, and a comparison of driving-mode-based modeling (DMBM) and driver-based modeling (DBM) was conducted. The results showed that the driving process could be viewed as five core driving modes, and the DMBM has the potential to bring upwards of a 13% accuracy improvement with fewer parameters.

  • Investigating the intra-driver heterogeneity in car following behaviour based on large-scale naturalistic driving study

    by Hongyu Rao, Duo Zhang, Guoyang Qin, Lishengsa Yue, Jian Sun

    Intra-driver heterogeneity is defined as transition of driver’s behavior between usual and unusual, which is an intrinsic feature of drivers while yet to be extensively explored. This study used a large-scale naturalistic driving data set to investigate intra-driver heterogeneity in car-following. We constructed an IDM-based baseline model to represent a driver’s usual behavior; by measuring difference between observed behavior with baseline, unusual behavior was identified. Then, multi-level logit model with random effects was fitted to uncover contributing factors. Among 41 drivers’ 1356 trips, intra-driver heterogeneity was identified in 3194 episodes, which accounts for 15% of the time. Within investigated 24 factors, we found that intra-driver heterogeneity was statistically related with vehicle kinematic features, then traffic flow and surrounding environment, but not driver sociodemographics. Being cut in is the most prominent trigger for intra-driver heterogeneity. These findings garner some remarkable insights into improvement of car-following modeling and many other engineering practices.


  • Saturation Flow Rate at the Work Zone–Straddled Intersections with Interweaving Movements: Lane-Based Modeling Study

    by Zhangcun Yan, Duo Zhang, Xiaozhao Lu, Qiyuan Liu, Yinhai Wang, Jian Sun

    This study explored how the presence of work zones could influence the saturation flow rate (SFR) prevailing at an intersection. Specifically, it researched construction-ridden intersections with interweaving movements (CIWIMs) of vehicle flows that proceed across the stop line and down the connective lanes on the downstream approach to the adjacent intersection. First, image recognition and tracking algorithms were used to extract 2,545 vehicle trajectories from the video captured on-site. Then, the trajectories were manipulated based on lanes to obtain the saturated headway time of the entry-lane stop line during effective green time and the variables related to lane-change behaviors after passing the stop line (e.g., lane-change percentage, lane-change position, lorry percentage, and average passing speed). In addition, certain linear and nonlinear regression methods were employed to estimate lane-focused SFR models in a parsimonious fashion. Subsequently, the Highway Capacity Manual (HCM) model, along with Schroeder’s model, was pairwise compared with the newly proposed Box-Cox model for validation. The results indicate that the mean errors are 28.86% and 17.70% for the HCM and Schroeder’s models, respectively, while the estimation error for the Box-Cox model is merely 7.20%. This sensitivity analysis reveals that the proportion of bidirectional lane changes, spatial use rate of lane changes, and proportion of heavier vehicles significantly compromises the CIWIM-based SFR. One important finding is that the models accounting for microscopic channel-change behaviors, with higher estimation accuracy compared with existing models, can also be used for traffic simulation parameter calibration and road delay estimation to obtain higher validity and precision.