Lu Chen
Research Subjects
Research Interests
Lu Chen has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Taotao Qiang
College of Bioresources and Materials Engineering Shaanxi Collaborative Innovation Center of Industrial Auxiliary Chemistry & Technology Shaanxi University of Science & Technology Xi'an 710021 China
5 shared publications Boqiang Qiu
3 shared publicationsLongfang Ren
2 shared publications- Longfang Ren
College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi’an, China
2 shared publications - Bingsheng Guan
Department of Gastrointestinal Surgery, First Affiliated Hospital of Jinan University, Guangzhou, China
1 shared publication - Chang Chen
The Department of Electronics Science and Technology University of Science and Technology of China Hefei China
1 shared publication
Latest Publications
- Open Access
- 6 June 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (24) , 11855-11864
Ti3C2Tx 2D and 0D MXene Cocatalysts on CuO for Enhanced Photocatalytic Hydrogen Evolution
Cocatalysts play a crucial role in photocatalytic reactions, and titanium carbide MXene (Ti3C2T x ) is a promising alternative to expensive noble metal cocatalysts. Herein, we coupled a copper(II) oxide (CuO) semiconductor with Ti3C2T x in two dimensions, nanosheets (T2D) and quantum dots (T0D), forming T2D/CuO and T0D/CuO composite photocatalysts. The effects of size, morphology, and energetics of the different Ti3C2T x forms were investigated in relation to their photocatalytic hydrogen production rates. The T0D/CuO sample achieved a hydrogen production rate of 2174 (±189) μmol g–1 h–1, which is 19 and over 100 times higher than those of T2D/CuO samples and pure CuO, respectively. The enhanced performance of T0D/CuO compared to T2D/CuO can be attributed to a smaller particle size, improved light absorption, larger specific surface area, and a deeper T0D work function promoting charge separation for photocatalytic reactions. These results highlight the impact of the different dimensionalities of titanium carbide MXenes on the photocatalytic performance of composites and point to promising avenues to achieve efficient photocatalytic systems.
- 6 June 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (24) , 11855-11864
Open AccessTi3C2Tx 2D and 0D MXene Cocatalysts on CuO for Enhanced Photocatalytic Hydrogen Evolution
Cocatalysts play a crucial role in photocatalytic reactions, and titanium carbide MXene (Ti3C2T x ) is a promising alternative to expensive noble metal cocatalysts. Herein, we coupled a copper(II) oxide (CuO) semiconductor with Ti3C2T x in two dimensions, nanosheets (T2D) and quantum dots (T0D), forming T2D/CuO and T0D/CuO composite photocatalysts. The effects of size, morphology, and energetics of the different Ti3C2T x forms were investigated in relation to their photocatalytic hydrogen production rates. The T0D/CuO sample achieved a hydrogen production rate of 2174 (±189) μmol g–1 h–1, which is 19 and over 100 times higher than those of T2D/CuO samples and pure CuO, respectively. The enhanced performance of T0D/CuO compared to T2D/CuO can be attributed to a smaller particle size, improved light absorption, larger specific surface area, and a deeper T0D work function promoting charge separation for photocatalytic reactions. These results highlight the impact of the different dimensionalities of titanium carbide MXenes on the photocatalytic performance of composites and point to promising avenues to achieve efficient photocatalytic systems.
- 18 September 2024
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 12 (5) , 114180
Preparation of double network antibacterial hydrogel modified by hydroxamic acid gelatin/polyacrylamide and high efficiency uranium extraction from seawater
- 18 September 2024
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 12 (5) , 114180
Preparation of double network antibacterial hydrogel modified by hydroxamic acid gelatin/polyacrylamide and high efficiency uranium extraction from seawater
- 20 July 2024
- Published by Springer Nature in Langenbeck's Archives of Surgery
- Vol. 409 (1) , 1-16
Long-term prevalence of vitamin deficiencies after bariatric surgery: a meta-analysis
Background Bariatric surgery can lead to short-mid-term vitamin deficiencies, but the long-term vitamin deficiencies is unclear. This study aimed to conduct a meta-analysis regarding the long-term prevalence (≥ 5 years) of vitamin deficiencies after bariatric surgery. Methods We searched the EMBASE, PubMed, and CENTRAL databases for clinical studies until June 2023. Meta-analysis, sensitivity, subgroup, and meta-regression analyses were performed. Results This meta-analysis included 54 articles with follow-up duration ranging from 5 to 17 years. The most prevalent vitamin deficiencies after surgery were vitamin D (35.8%), followed by vitamin E (16.5%), vitamin A (13.4%), vitamin K (9.6%), and vitamin B12 (8.5%). Subgroup analyses showed that the prevalence of vitamin A and folate deficiencies increased with the follow-up time. Roux-en-Y gastric bypass had a higher rate of vitamin B12 deficiency than sleeve gastrectomy and biliopancreatic diversion with duodenal switch (BPD-DS). Studies conducted in Europe had higher vitamin A deficiency (25.8%) than in America (0.8%); Asian studies had more vitamin B12 but less vitamin D deficiency than European and American studies. Meta-regression analysis displayed that publication year, study design, preoperative age, BMI, and quality assessment score were not associated with vitamin A, B12, D, and folate deficiencies rate. Conclusion A high prevalence of vitamin deficiencies was found after bariatric surgery in the long-term follow-up, especially vitamin D, E, A, K, and B12. The variation in study regions, surgical procedures, and follow-up time are associated with different postoperative vitamin deficiencies; it is necessary to develop more targeted vitamin supplement programs.
- 20 July 2024
- Published by Springer Nature in Langenbeck's Archives of Surgery
- Vol. 409 (1) , 1-16
Long-term prevalence of vitamin deficiencies after bariatric surgery: a meta-analysis
Background Bariatric surgery can lead to short-mid-term vitamin deficiencies, but the long-term vitamin deficiencies is unclear. This study aimed to conduct a meta-analysis regarding the long-term prevalence (≥ 5 years) of vitamin deficiencies after bariatric surgery. Methods We searched the EMBASE, PubMed, and CENTRAL databases for clinical studies until June 2023. Meta-analysis, sensitivity, subgroup, and meta-regression analyses were performed. Results This meta-analysis included 54 articles with follow-up duration ranging from 5 to 17 years. The most prevalent vitamin deficiencies after surgery were vitamin D (35.8%), followed by vitamin E (16.5%), vitamin A (13.4%), vitamin K (9.6%), and vitamin B12 (8.5%). Subgroup analyses showed that the prevalence of vitamin A and folate deficiencies increased with the follow-up time. Roux-en-Y gastric bypass had a higher rate of vitamin B12 deficiency than sleeve gastrectomy and biliopancreatic diversion with duodenal switch (BPD-DS). Studies conducted in Europe had higher vitamin A deficiency (25.8%) than in America (0.8%); Asian studies had more vitamin B12 but less vitamin D deficiency than European and American studies. Meta-regression analysis displayed that publication year, study design, preoperative age, BMI, and quality assessment score were not associated with vitamin A, B12, D, and folate deficiencies rate. Conclusion A high prevalence of vitamin deficiencies was found after bariatric surgery in the long-term follow-up, especially vitamin D, E, A, K, and B12. The variation in study regions, surgical procedures, and follow-up time are associated with different postoperative vitamin deficiencies; it is necessary to develop more targeted vitamin supplement programs.
- 26 June 2023
- Published by IOP Publishing in 2D Materials
- Vol. 10 (3) , 035030
Rose-inspired 3D 1T-MoS x /Ti3C2T x /TiO2 photocatalyst for water purification
The rose-inspired photocatalyst, 1T-MoS x /Ti3C2T x /TiO2, demonstrated exceptional activity in the simultaneous removal of hexavalent chromium (Cr(VI)) and methylene blue (MB), achieving high efficiencies of 97.7% and 97.2% respectively. Furthermore, it exhibited effective degradation of another dye, Rhodamine B (Rh.B). Scanning electron microscopy figures showed its unique nanoflower morphology. The introduction of titanium carbide nanosheets (Ti3C2T x ) and the formation of Schottky junctions can effectively prolong the carrier lifetime. The degradation path of MB was deduced by liquid chromatography–mass spectrometry, which confirmed the process of photocatalytic decomposition of organic pollutants. Compared to physical purification methods, it offers the advantage of not only removing pollutants but also degrading them. Furthermore, by utilizing MB as a sacrificial agent, the reduction can take place in a mild neutral environment, resulting in minimized secondary pollution. Through its distinctive three-dimensional structure and the Ti3C2T x cocatalyst, the 1T-MoS x /Ti3C2T x /TiO2 photocatalyst demonstrates remarkable catalytic activity, and effective purification of wastewater containing Cr(VI) and organic dyes.
- 26 June 2023
- Published by IOP Publishing in 2D Materials
- Vol. 10 (3) , 035030
Rose-inspired 3D 1T-MoS x /Ti3C2T x /TiO2 photocatalyst for water purification
The rose-inspired photocatalyst, 1T-MoS x /Ti3C2T x /TiO2, demonstrated exceptional activity in the simultaneous removal of hexavalent chromium (Cr(VI)) and methylene blue (MB), achieving high efficiencies of 97.7% and 97.2% respectively. Furthermore, it exhibited effective degradation of another dye, Rhodamine B (Rh.B). Scanning electron microscopy figures showed its unique nanoflower morphology. The introduction of titanium carbide nanosheets (Ti3C2T x ) and the formation of Schottky junctions can effectively prolong the carrier lifetime. The degradation path of MB was deduced by liquid chromatography–mass spectrometry, which confirmed the process of photocatalytic decomposition of organic pollutants. Compared to physical purification methods, it offers the advantage of not only removing pollutants but also degrading them. Furthermore, by utilizing MB as a sacrificial agent, the reduction can take place in a mild neutral environment, resulting in minimized secondary pollution. Through its distinctive three-dimensional structure and the Ti3C2T x cocatalyst, the 1T-MoS x /Ti3C2T x /TiO2 photocatalyst demonstrates remarkable catalytic activity, and effective purification of wastewater containing Cr(VI) and organic dyes.
- 6 March 2023
- Published by Elsevier in Desalination
- Vol. 555, 116536
All-in-one solar-driven evaporator for high-performance water desalination and synchronous volatile organic compound degradation
- 6 March 2023
- Published by Elsevier in Desalination
- Vol. 555, 116536
All-in-one solar-driven evaporator for high-performance water desalination and synchronous volatile organic compound degradation
- 31 October 2022
- Published by Taylor & Francis
- p. 903-910
Analysis of environmental protection measures of expressway construction in Zhejiang province
The construction cycle of the expressway projects is relatively long, with a significant environmental impact on the construction area. Therefore, during the expressway construction, attention should be paid to the protection of the surrounding environment, especially to the prevention of the ecological environment from being damaged by engineering construction. In addition, environment-friendly construction technology should be adopted to carry out a reasonable design of engineering construction. Based on a comprehensive investigation and analysis of the environmental protection measures during the construction of the Zhejiang Lin’an-Jinhua Expressway, this paper summarizes and expounds on the environmental protection technologies and measures adopted in the construction process. The Outline for Building A Leading Transportation Nation issued by the Central Committee of the Communist Party of China and the State Council in 2019 requires “building a safe, convenient, efficient, green, economic, modern and comprehensive transportation system”, and points out the main direction in green traffic and transportation development from the aspects of promoting the conservation and intensive use of resources, strengthening the energy saving, emission reduction, pollution prevention, and control, and improving the protection and restoration of the traffic and transportation ecological environment. Meanwhile, China's environmental management is subject to strategic transformation with the goal of improving the environmental quality, and the demand for expressway construction environmental quality is also continuously enhanced. At present, with the purpose of protecting the ecological environment and safeguarding human health, proactive policies are developed and various environmental protection technologies and measures are implemented in order to promote the building of China into a leading transportation nation. Expressway construction is characterized by a long construction cycle and great scale, which may inevitably cause damage to the ecological environment inside and outside the road area during construction, and even lead to an ecological imbalance in severe cases. In addition, with the widespread attention of all sectors of society to the impact of environmental pollution on the road area, and the continuously increasing public complaints, the environmental authorities have strengthened the management of the traffic and transportation industry, causing great pressure on environmental protection from the aspects of building, construction and supervision. In view of such a circumstance, this paper carries out a comprehensive investigation of the construction environmental protection measures of the Zhejiang Lin’an-Jinhua Expressway, analyzes the main factors that affect the environment in the process of expressway construction (water environment pollution, ecological environment pollution, air environment, and dust pollution, solid waste pollution, noise pollution, etc.), and summarizes and expounds the environmental protection technologies and measures adopted in the construction process.
- 31 October 2022
- Published by Taylor & Francis
- p. 903-910
Analysis of environmental protection measures of expressway construction in Zhejiang province
The construction cycle of the expressway projects is relatively long, with a significant environmental impact on the construction area. Therefore, during the expressway construction, attention should be paid to the protection of the surrounding environment, especially to the prevention of the ecological environment from being damaged by engineering construction. In addition, environment-friendly construction technology should be adopted to carry out a reasonable design of engineering construction. Based on a comprehensive investigation and analysis of the environmental protection measures during the construction of the Zhejiang Lin’an-Jinhua Expressway, this paper summarizes and expounds on the environmental protection technologies and measures adopted in the construction process. The Outline for Building A Leading Transportation Nation issued by the Central Committee of the Communist Party of China and the State Council in 2019 requires “building a safe, convenient, efficient, green, economic, modern and comprehensive transportation system”, and points out the main direction in green traffic and transportation development from the aspects of promoting the conservation and intensive use of resources, strengthening the energy saving, emission reduction, pollution prevention, and control, and improving the protection and restoration of the traffic and transportation ecological environment. Meanwhile, China's environmental management is subject to strategic transformation with the goal of improving the environmental quality, and the demand for expressway construction environmental quality is also continuously enhanced. At present, with the purpose of protecting the ecological environment and safeguarding human health, proactive policies are developed and various environmental protection technologies and measures are implemented in order to promote the building of China into a leading transportation nation. Expressway construction is characterized by a long construction cycle and great scale, which may inevitably cause damage to the ecological environment inside and outside the road area during construction, and even lead to an ecological imbalance in severe cases. In addition, with the widespread attention of all sectors of society to the impact of environmental pollution on the road area, and the continuously increasing public complaints, the environmental authorities have strengthened the management of the traffic and transportation industry, causing great pressure on environmental protection from the aspects of building, construction and supervision. In view of such a circumstance, this paper carries out a comprehensive investigation of the construction environmental protection measures of the Zhejiang Lin’an-Jinhua Expressway, analyzes the main factors that affect the environment in the process of expressway construction (water environment pollution, ecological environment pollution, air environment, and dust pollution, solid waste pollution, noise pollution, etc.), and summarizes and expounds the environmental protection technologies and measures adopted in the construction process.
- 26 October 2022
- Published by Elsevier in Ceramics International
- Vol. 49 (4) , 6688-6698
Carboxylated chitosan modified alkalization of 2D MXene Ti3C2 and its Cr(VI) removal performance in aqueous solution
- 26 October 2022
- Published by Elsevier in Ceramics International
- Vol. 49 (4) , 6688-6698
Carboxylated chitosan modified alkalization of 2D MXene Ti3C2 and its Cr(VI) removal performance in aqueous solution
- 13 August 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (69) , 29741-29752
Monolayered Ti3C2O/(001) TiO2 photocatalyst with Schottky junction and active facets for hydrogen production
- 13 August 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (69) , 29741-29752
Monolayered Ti3C2O/(001) TiO2 photocatalyst with Schottky junction and active facets for hydrogen production
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Carboxylated Chitosan Modified Alkalization of Mxene Ti3c2 Enhanced its Cr(Vi) Removal Performance in Aqueous Solution
In this work, a novel adsorbent for the removal of hexavalent chromium (Cr(VI)) in aqueous solution was successfully prepared by altering the Ti 3 C 2 /chitosan composite with disodium ethylenediaminetetraacetate (EDTA·2Na) agent. The successful surface loading of chitosan on Ti 3 C 2 was demonstrated by various characterization methods, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). The adsorption of Cr(VI) by Ti 3 C 2 -based composite under various circumstances was evaluated using batch adsorption experiments. The adsorption performance of the optimal sample for Cr(VI) was investigated in detail through different influencing factors, and the adsorption process was analyzed by adsorption kinetics and isotherm model. In addition, XPS analysis of adsorbents before and after adsorption showed that some Cr(VI) was reduced to Cr(III) during the whole process, which was conducive to reducing the biological toxicity of Cr(VI). The mechanism analysis showed that the adsorption was mainly electrostatic physical adsorption, supplemented by chemical reduction adsorption. Finally, through the regeneration cycle experiment, it was found that the adsorption rate of Cr(VI) remained above 80% after six repeated adsorptions, indicating that the composite material had good stability and might have certain practical application value in the treatment of Cr(VI)-containing wastewater.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessCarboxylated Chitosan Modified Alkalization of Mxene Ti3c2 Enhanced its Cr(Vi) Removal Performance in Aqueous Solution
In this work, a novel adsorbent for the removal of hexavalent chromium (Cr(VI)) in aqueous solution was successfully prepared by altering the Ti 3 C 2 /chitosan composite with disodium ethylenediaminetetraacetate (EDTA·2Na) agent. The successful surface loading of chitosan on Ti 3 C 2 was demonstrated by various characterization methods, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). The adsorption of Cr(VI) by Ti 3 C 2 -based composite under various circumstances was evaluated using batch adsorption experiments. The adsorption performance of the optimal sample for Cr(VI) was investigated in detail through different influencing factors, and the adsorption process was analyzed by adsorption kinetics and isotherm model. In addition, XPS analysis of adsorbents before and after adsorption showed that some Cr(VI) was reduced to Cr(III) during the whole process, which was conducive to reducing the biological toxicity of Cr(VI). The mechanism analysis showed that the adsorption was mainly electrostatic physical adsorption, supplemented by chemical reduction adsorption. Finally, through the regeneration cycle experiment, it was found that the adsorption rate of Cr(VI) remained above 80% after six repeated adsorptions, indicating that the composite material had good stability and might have certain practical application value in the treatment of Cr(VI)-containing wastewater.
- 28 November 2013
- Published by Springer Nature in Archives of Environmental Contamination and Toxicology
- Vol. 66 (2) , 270-276
Changes in Spectral Characteristics and Copper (II)-Binding of Dissolved Organic Matter in Leachate from Different Water-Treatment Processes
The aim of the present study was to investigate the fluorescence properties of dissolved organic matter (DOM) from four leachate samples, which were disposed by regulating tank (RTK), anaerobic treatment (ATT), oxidation ditch (ODH), and membrane bioreactor and to assess their binding capacities and stability constants by Cu(II). The results showed that five fluorescent peaks, including three humic-like peaks (peaks A, C, and E) and two protein-like peaks (peaks B and D), were identified. Most fluorescent components can be degraded after ODH. Fluorescence-quenching titration showed that the modified Stern–Volmer model can be used to fit the quenching data and calculate conditional stability constants (log K) and the % of fluorophores (f %) between DOM and Cu(II). DOM–Cu(II) complexes had relatively high log K values in the RTK and ATT disposals. After the ODH-treatment process, log K values showed a marked decrease. The f % values of protein-like materials were evidently greater than those of humic-like substances. The results showed the impact of the water treatment on the metal-binding ability of various fractions.
- 28 November 2013
- Published by Springer Nature in Archives of Environmental Contamination and Toxicology
- Vol. 66 (2) , 270-276
Changes in Spectral Characteristics and Copper (II)-Binding of Dissolved Organic Matter in Leachate from Different Water-Treatment Processes
The aim of the present study was to investigate the fluorescence properties of dissolved organic matter (DOM) from four leachate samples, which were disposed by regulating tank (RTK), anaerobic treatment (ATT), oxidation ditch (ODH), and membrane bioreactor and to assess their binding capacities and stability constants by Cu(II). The results showed that five fluorescent peaks, including three humic-like peaks (peaks A, C, and E) and two protein-like peaks (peaks B and D), were identified. Most fluorescent components can be degraded after ODH. Fluorescence-quenching titration showed that the modified Stern–Volmer model can be used to fit the quenching data and calculate conditional stability constants (log K) and the % of fluorophores (f %) between DOM and Cu(II). DOM–Cu(II) complexes had relatively high log K values in the RTK and ATT disposals. After the ODH-treatment process, log K values showed a marked decrease. The f % values of protein-like materials were evidently greater than those of humic-like substances. The results showed the impact of the water treatment on the metal-binding ability of various fractions.