İsMail Boyar
İsMail Boyar has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Can Ertekin
Akdeniz University
9 shared publications - Ahmet Naci Onus
AKDENİZ ÜNİVERSİTESİ, ZİRAAT FAKÜLTESİ, BAHÇE BİTKİLERİ BÖLÜMÜ
3 shared publications - Tugce Ozsan Kilic
Akdeniz University
3 shared publications - Cüneyt Dinçer
Akdeniz Üniversitesi | Akdeniz University
2 shared publications - Deniz Hazar
Department of Horticulture, Faculty of Agriculture, Akdeniz University, 07070 Antalya, Turkey
2 shared publications - Arzu Şencan Şahin
Technology Faculty, Department of Mechanical Engineering, Isparta University of Applied Sciences, Isparta, Turkey
1 shared publication
Latest Publications
- 8 September 2026
- Published by Hatay Mustafa Kemal University in Mustafa Kemal Üniversitesi Tarım Bilimleri Dergisi
- Vol. 31 (3) , 633-646
Süt sağım makinalarının çalışma süresince aktif/pasif durumlarının belirlenmesi: Türkiye’de Batı Akdeniz bölgesi örneği
Bu çalışmada, kış ve yaz dönemlerinde Akdeniz (AKDÜ), Burdur Mehmet Akif Ersoy (MAKÜ) ve Isparta Uygulamalı Bilimler (ISUBÜ) Üniversitelerinin büyükbaş süt sığırı yetiştiriciliği işletmelerinde bir hafta boyunca hergün sabah ve akşam sağım sürecinin başlangıcından tamamlanmasına kadar geçen tüm süreçte yerinde gözlem ve inceleme çalışmalarıyla, süt sağım makinalarının (SSM) sağım süreleri ve enerji tüketim değerleri saptanmış ve analiz edilmiştir. Elde edilen bu veriler ile farklı işletmelerde sağmal sayısının ve sağımcı rolünün, süt sağım makinalarının aktif ve boşta (pasif) çalıştığı zamanlara etkisinin olup olmadığı araştırılmıştır. Kış döneminde işletmeler arasında en yüksek toplam sağım süresinin %40’ını pasif zamanda geçiren AKDÜ işletmesi olurken, yaz döneminde %46 ile ISUBÜ işletmesi olmuştur. Sabah sağımlarında ISUBÜ işletmesi yine %46 ile en yüksek pasif zamana sahip olurken akşam sağımlarında ise %39 ile AKDÜ işletmesi bu kriterde değerlendirilmiştir. Her iki dönem ve hem sabah hem akşam sağımı göz önüne alındığında 98 dakika ile en uzun sağım süresi AKDÜ işletmesinde bulunmuş ve bu işletmede ortalama %36 pasif geçen vakum pompası çalışma süresine rastlanmıştır. Bu çalışma süresinde her bir sağımda ortalama 1.84 kWh pasif kullanımda enerji tüketilmiştir. Değişken devirli vakum pompalarının kullanılmasının bu durumun önüne geçeceği düşünülse de, buradaki pasif tüketimlerin çoğunlukla sağım sırasında değil, sağım başında ve sonunda gerçekleştiği görülmüştür.
- 8 September 2026
- Published by Hatay Mustafa Kemal University in Mustafa Kemal Üniversitesi Tarım Bilimleri Dergisi
- Vol. 31 (3) , 633-646
Süt sağım makinalarının çalışma süresince aktif/pasif durumlarının belirlenmesi: Türkiye’de Batı Akdeniz bölgesi örneği
Bu çalışmada, kış ve yaz dönemlerinde Akdeniz (AKDÜ), Burdur Mehmet Akif Ersoy (MAKÜ) ve Isparta Uygulamalı Bilimler (ISUBÜ) Üniversitelerinin büyükbaş süt sığırı yetiştiriciliği işletmelerinde bir hafta boyunca hergün sabah ve akşam sağım sürecinin başlangıcından tamamlanmasına kadar geçen tüm süreçte yerinde gözlem ve inceleme çalışmalarıyla, süt sağım makinalarının (SSM) sağım süreleri ve enerji tüketim değerleri saptanmış ve analiz edilmiştir. Elde edilen bu veriler ile farklı işletmelerde sağmal sayısının ve sağımcı rolünün, süt sağım makinalarının aktif ve boşta (pasif) çalıştığı zamanlara etkisinin olup olmadığı araştırılmıştır. Kış döneminde işletmeler arasında en yüksek toplam sağım süresinin %40’ını pasif zamanda geçiren AKDÜ işletmesi olurken, yaz döneminde %46 ile ISUBÜ işletmesi olmuştur. Sabah sağımlarında ISUBÜ işletmesi yine %46 ile en yüksek pasif zamana sahip olurken akşam sağımlarında ise %39 ile AKDÜ işletmesi bu kriterde değerlendirilmiştir. Her iki dönem ve hem sabah hem akşam sağımı göz önüne alındığında 98 dakika ile en uzun sağım süresi AKDÜ işletmesinde bulunmuş ve bu işletmede ortalama %36 pasif geçen vakum pompası çalışma süresine rastlanmıştır. Bu çalışma süresinde her bir sağımda ortalama 1.84 kWh pasif kullanımda enerji tüketilmiştir. Değişken devirli vakum pompalarının kullanılmasının bu durumun önüne geçeceği düşünülse de, buradaki pasif tüketimlerin çoğunlukla sağım sırasında değil, sağım başında ve sonunda gerçekleştiği görülmüştür.
- Open Access
Ultrasound-Assisted Osmotic Pretreatment of Myrtle (Myrtus communis L.) Berries with Grape Molasses: Impacts on Convective Drying Quality
Myrtle berries are rich in bioactive phenolics and volatile terpenes and have potential for use in functional food products. However, the combined application of grape molasses and ultrasound as a pretreatment before drying has received limited attention. This study characterized fresh ‘Yakup’ myrtle berries as baseline material and explored the drying behavior and measured quality attributes of berries subjected to twelve pretreatments combining grape molasses or water, ultrasound-assisted or static immersion, and treatment durations of 30, 45, or 60 min. Pretreated and untreated fruits were dried by forced-air convection at 60, 75, and 90 °C. Dried samples were evaluated for antioxidant activity, total phenolic content (TPC), total anthocyanin content (TAC), sugar composition, and drying behavior. The shortest observed drying times at 60 and 75 °C occurred after ultrasound treatment in grape molasses for 30 and 45 min, respectively, whereas static immersion in grape molasses for 60 min and the untreated control showed the shortest drying times at 90 °C. Static immersion in grape molasses for 45 min showed the highest measured TPC at 60 °C (1353.47 mg GAE/100 g dw), while the untreated control showed the highest TPC at 75 and 90 °C and the highest TAC at all three temperatures. The treatment showing the highest total sugar concentration also differed with drying temperature. Thus, no single pretreatment consistently maximized all measured attributes. The findings identify condition-specific candidate strategies rather than a universally superior pretreatment. Because each treatment–temperature combination was represented by one drying tray and the triplicate compositional determinations were analytical rather than independent process replicates, the comparisons are descriptive and require confirmation in independently replicated processing trials. Complete pretreatment mass balances are also required before water loss, solid gain, solute uptake, or true compound retention can be quantified. Looking ahead, studies can be conducted that include sensory and economic evaluations by creating customized pretreatment protocols for industrial applications.
Open AccessUltrasound-Assisted Osmotic Pretreatment of Myrtle (Myrtus communis L.) Berries with Grape Molasses: Impacts on Convective Drying Quality
Myrtle berries are rich in bioactive phenolics and volatile terpenes and have potential for use in functional food products. However, the combined application of grape molasses and ultrasound as a pretreatment before drying has received limited attention. This study characterized fresh ‘Yakup’ myrtle berries as baseline material and explored the drying behavior and measured quality attributes of berries subjected to twelve pretreatments combining grape molasses or water, ultrasound-assisted or static immersion, and treatment durations of 30, 45, or 60 min. Pretreated and untreated fruits were dried by forced-air convection at 60, 75, and 90 °C. Dried samples were evaluated for antioxidant activity, total phenolic content (TPC), total anthocyanin content (TAC), sugar composition, and drying behavior. The shortest observed drying times at 60 and 75 °C occurred after ultrasound treatment in grape molasses for 30 and 45 min, respectively, whereas static immersion in grape molasses for 60 min and the untreated control showed the shortest drying times at 90 °C. Static immersion in grape molasses for 45 min showed the highest measured TPC at 60 °C (1353.47 mg GAE/100 g dw), while the untreated control showed the highest TPC at 75 and 90 °C and the highest TAC at all three temperatures. The treatment showing the highest total sugar concentration also differed with drying temperature. Thus, no single pretreatment consistently maximized all measured attributes. The findings identify condition-specific candidate strategies rather than a universally superior pretreatment. Because each treatment–temperature combination was represented by one drying tray and the triplicate compositional determinations were analytical rather than independent process replicates, the comparisons are descriptive and require confirmation in independently replicated processing trials. Complete pretreatment mass balances are also required before water loss, solid gain, solute uptake, or true compound retention can be quantified. Looking ahead, studies can be conducted that include sensory and economic evaluations by creating customized pretreatment protocols for industrial applications.
- Open Access
- 27 September 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (10) , 1887
Effects of Different Osmotic Pre-Treatments on the Drying Characteristics, Modeling and Physicochemical Properties of Momordica charantia L. Slices
A significant vegetable in the Cucurbitaceae family, the bitter gourd (Momordica charantia L.) is widely recognized for its beneficial health properties, including anti-diabetic, anti-carcinogenic, anti-inflammatory, anti-ulcer, antiviral activities. With a total of three Brix values (50, 60, and 70) and three different dipping times (10, 20, and 30 h), the goal of the current study was to identify the proper sugar and grape molasses solutions (pekmez) and dipping times for osmotic pre-treatments of bitter gourd samples to make it sweet and widely consumed. In the present study, mathematical modeling of drying processes, moisture content and water activity, total color changes, total phenolic content-antioxidant activity, and carotenoid contents were assessed. As a result of 13 different mathematical modeling tests, “Diffusion Approach”, “Logarithmic” and “Midilli et al.” models were the best models, giving the highest R2 and lowest X2-RMSE values. There were samples that were dipped at 50 °Brix grape molasses, which decreased below the 10% wet basis (w.b.) limit in the shortest time with 180 min, in a 10 h dipping time. The samples were dipped in 60 °Brix sugar, which fell below the same limit in the shortest time with 135 and 165 min, respectively, at 20 and 30 h dipping times. The highest total phenolic and carotenoid contents were found in 30 h dipping time in 60 °Brix grape molasses with 8296.87 mg/kg and 10 h dipping time in 50 °Brix sugar solutions with 89.22 mg/kg, respectively. While the phenolic content was higher in all samples dipped in grape molasses, the carotenoid content was higher in all samples dipped in sugar, which was one of the most important results of the study.
- 27 September 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (10) , 1887
Open AccessEffects of Different Osmotic Pre-Treatments on the Drying Characteristics, Modeling and Physicochemical Properties of Momordica charantia L. Slices
A significant vegetable in the Cucurbitaceae family, the bitter gourd (Momordica charantia L.) is widely recognized for its beneficial health properties, including anti-diabetic, anti-carcinogenic, anti-inflammatory, anti-ulcer, antiviral activities. With a total of three Brix values (50, 60, and 70) and three different dipping times (10, 20, and 30 h), the goal of the current study was to identify the proper sugar and grape molasses solutions (pekmez) and dipping times for osmotic pre-treatments of bitter gourd samples to make it sweet and widely consumed. In the present study, mathematical modeling of drying processes, moisture content and water activity, total color changes, total phenolic content-antioxidant activity, and carotenoid contents were assessed. As a result of 13 different mathematical modeling tests, “Diffusion Approach”, “Logarithmic” and “Midilli et al.” models were the best models, giving the highest R2 and lowest X2-RMSE values. There were samples that were dipped at 50 °Brix grape molasses, which decreased below the 10% wet basis (w.b.) limit in the shortest time with 180 min, in a 10 h dipping time. The samples were dipped in 60 °Brix sugar, which fell below the same limit in the shortest time with 135 and 165 min, respectively, at 20 and 30 h dipping times. The highest total phenolic and carotenoid contents were found in 30 h dipping time in 60 °Brix grape molasses with 8296.87 mg/kg and 10 h dipping time in 50 °Brix sugar solutions with 89.22 mg/kg, respectively. While the phenolic content was higher in all samples dipped in grape molasses, the carotenoid content was higher in all samples dipped in sugar, which was one of the most important results of the study.
- Open Access
- 21 September 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (9) , 1849
Improvement of Hot Air Dried Bitter Gourd (Momordica charantia L.) Product Quality: Optimization of Drying and Blanching Process by Experimental Design
Bitter gourd (Momordica charantia L.) is a plant species belonging to the Cucurbitaceae family, growing in tropical regions and containing health-promoting beneficial compounds. In the current study, bitter gourds prepared for drying were sliced in three different thicknesses (6, 8 and 10 mm) and dried in a hot-air dryer at three different temperatures (60, 70 and 80 °C) to preserve their medicinal efficacy. In the experiments, the samples were subjected to blanching at 93.5 °C and 2% salt water for 0, 2.5 and 5 min, and drying processes were conducted. After the drying process, drying time, total color change (∆E), total phenolic content (TPC), total antioxidant activity (TAA), and vitamin C properties were examined. The highest levels of TPC and TAA were found at lower drying air temperatures (DATs), and while these values increased with longer blanching times at lower DATs, they decreased with longer blanching times at higher DATs. According to the different drying temperatures used, it was discovered that the total color change peaked at 70 °C and that vitamin C levels declined as DAT rose. The optimal drying conditions for the 3D response surface methodology include 60 °C DAT, a slice thickness of 10 mm, and without blanching to maximize TPC, TAA and vitamin C content and minimize drying time and ∆E.
- 21 September 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (9) , 1849
Open AccessImprovement of Hot Air Dried Bitter Gourd (Momordica charantia L.) Product Quality: Optimization of Drying and Blanching Process by Experimental Design
Bitter gourd (Momordica charantia L.) is a plant species belonging to the Cucurbitaceae family, growing in tropical regions and containing health-promoting beneficial compounds. In the current study, bitter gourds prepared for drying were sliced in three different thicknesses (6, 8 and 10 mm) and dried in a hot-air dryer at three different temperatures (60, 70 and 80 °C) to preserve their medicinal efficacy. In the experiments, the samples were subjected to blanching at 93.5 °C and 2% salt water for 0, 2.5 and 5 min, and drying processes were conducted. After the drying process, drying time, total color change (∆E), total phenolic content (TPC), total antioxidant activity (TAA), and vitamin C properties were examined. The highest levels of TPC and TAA were found at lower drying air temperatures (DATs), and while these values increased with longer blanching times at lower DATs, they decreased with longer blanching times at higher DATs. According to the different drying temperatures used, it was discovered that the total color change peaked at 70 °C and that vitamin C levels declined as DAT rose. The optimal drying conditions for the 3D response surface methodology include 60 °C DAT, a slice thickness of 10 mm, and without blanching to maximize TPC, TAA and vitamin C content and minimize drying time and ∆E.
- Open Access
- 29 June 2023
- Published by International Journal of Agriculture Environment and Food Sciences in International Journal of Agriculture Environment and Food Sciences
- Vol. 7 (2) , 244-252
Some physical properties of bitter gourd (Momordica charantia L.) seeds and kernels
A noteworthy member of the Cucurbitaceae family, the bitter gourd (Momordica charantia L.) is a slender, vine-like annual summer vegetable. Despite the health promoting features, it is among the neglected vegetables in terms of both production values and scientific studies. The current study was aimed to assess some physico-mechanical properties of bitter gourd seeds and kernels viz., sizes, geometric shapes, angle of repose, densities, 1000-seed and kernel weight and, coefficient of friction on several surfaces (aluminum, chrome, iron, plastic, rubber, cardboard, glass and MDF wooden panel) in order to determine to important parameters to design seed sowing machines the materials to be used in storage and their design, the screening/separation/classification processes and the processing of bitter gourd into a commercial product. It has been observed that the seeds of bitter gourd have similar geometrical properties with the seeds of melon, watermelon, squash and cucumber from the Cucurbitaceae family. While closer values were observed in terms of length and width, it was determined that the seeds of bitter gourd were thicker. The lengths, widths, and thicknesses of these seeds/kernels with a moisture content of 16% (w.b.) according to the wet base were found to be 14.176/11.517, 7.562/5.922, and 4.076/2.815 mm, respectively. The angle of repose, thousand grain weight and true density of seeds/kernels were found 28.467/26.982°, 202.931/118.359 g and 0.919/1.659 g/cm3 respectively. Obtained results most likely can serve bitter gourd to be grown in large amounts in different part of the world where the climate is suitable for growing.
- 29 June 2023
- Published by International Journal of Agriculture Environment and Food Sciences in International Journal of Agriculture Environment and Food Sciences
- Vol. 7 (2) , 244-252
Open AccessSome physical properties of bitter gourd (Momordica charantia L.) seeds and kernels
A noteworthy member of the Cucurbitaceae family, the bitter gourd (Momordica charantia L.) is a slender, vine-like annual summer vegetable. Despite the health promoting features, it is among the neglected vegetables in terms of both production values and scientific studies. The current study was aimed to assess some physico-mechanical properties of bitter gourd seeds and kernels viz., sizes, geometric shapes, angle of repose, densities, 1000-seed and kernel weight and, coefficient of friction on several surfaces (aluminum, chrome, iron, plastic, rubber, cardboard, glass and MDF wooden panel) in order to determine to important parameters to design seed sowing machines the materials to be used in storage and their design, the screening/separation/classification processes and the processing of bitter gourd into a commercial product. It has been observed that the seeds of bitter gourd have similar geometrical properties with the seeds of melon, watermelon, squash and cucumber from the Cucurbitaceae family. While closer values were observed in terms of length and width, it was determined that the seeds of bitter gourd were thicker. The lengths, widths, and thicknesses of these seeds/kernels with a moisture content of 16% (w.b.) according to the wet base were found to be 14.176/11.517, 7.562/5.922, and 4.076/2.815 mm, respectively. The angle of repose, thousand grain weight and true density of seeds/kernels were found 28.467/26.982°, 202.931/118.359 g and 0.919/1.659 g/cm3 respectively. Obtained results most likely can serve bitter gourd to be grown in large amounts in different part of the world where the climate is suitable for growing.
- Open Access
- 23 June 2023
- Published by Harran Tarim ve Gida Dergisi in Harran Tarım ve Gıda Bilimleri Dergisi
- Vol. 27 (2) , 228-238
Büyükbaş hayvan yetiştiriciliği işletmelerinin enerji kullanımlarının ve bazı mekanizasyon özelliklerinin belirlenmesi üzerine bir çalışma
Ülkemizde birim enerji maliyetlerinde son yıllarda meydana gelen artışlar birçok sektörü enerji verimliliği konusunda çalışmalar yapılmasına mecbur bırakmıştır. Fakat, hayvancılık ve tarım makinaları kullanımına yönelik yapılan enerji verimliliği ve enerji kullanımı çalışmalarının sayısının az olması ve detaylı olmaması dikkat çekmiştir. Çalışmanın amacı büyükbaş hayvan yetiştiriciliğinde enerji kullanımının ve makina güç gereksinimlerinin ortaya çıkarılması üzerine planlanmıştır. Bu kapsamda minimum 13 maksimum 3 055 büyükbaş hayvana sahip farklı büyüklüklerdeki, ortalama %72 kapasite doluluk oranında, toplam 51 adet hayvancılık işletmesi ile yüz yüze veya telefon ile görüşülmüş, yerinde incelemeler ile birlikte veriler toplanmıştır. Çalışma, İzmir, Aydın, Denizli, Isparta ve Burdur illerinin dışındaki illerde bulunan işletme sahipleriyle (%18) telefonla görüşülerek yürütülmüştür. Bu kapsamda işletme sahiplerinin, eğitimleri, tecrübeleri, makina varlıkları, elektrik enerjisi tüketimleri, işçilik süreleri, makina teknik özellikleri gibi bilgiler toplanmış, yorumlanmış ve değerlendirilmiştir. İşletmelerin ortalama süt verimi 21.87 L çıkarken, minimum ve maksimum değerler sırasıyla 14.29 ve 37.5 L olarak belirlenmiştir. İşletmelerin sağmal hayvan başına ortalama aylık elektrik enerjisi kullanımları 91.3 kWh, 1 L süt üretimi için 3.4 kWh olarak bulunmuştur. Sonuç olarak işletmelerin büyüklük ve farklı parametrelere göre elektrik enerjisi kullanımları grafikler ile açıklanmış, birim tüketimler hesaplanmıştır. Çalışma, bu konuda yapılacak daha detaylı araştırmalara ihtiyaç duyulduğunu ortaya koymuştur ve yapılacak sonraki araştırmalara ışık tutacağı düşünülmektedir.
- 23 June 2023
- Published by Harran Tarim ve Gida Dergisi in Harran Tarım ve Gıda Bilimleri Dergisi
- Vol. 27 (2) , 228-238
Open AccessBüyükbaş hayvan yetiştiriciliği işletmelerinin enerji kullanımlarının ve bazı mekanizasyon özelliklerinin belirlenmesi üzerine bir çalışma
Ülkemizde birim enerji maliyetlerinde son yıllarda meydana gelen artışlar birçok sektörü enerji verimliliği konusunda çalışmalar yapılmasına mecbur bırakmıştır. Fakat, hayvancılık ve tarım makinaları kullanımına yönelik yapılan enerji verimliliği ve enerji kullanımı çalışmalarının sayısının az olması ve detaylı olmaması dikkat çekmiştir. Çalışmanın amacı büyükbaş hayvan yetiştiriciliğinde enerji kullanımının ve makina güç gereksinimlerinin ortaya çıkarılması üzerine planlanmıştır. Bu kapsamda minimum 13 maksimum 3 055 büyükbaş hayvana sahip farklı büyüklüklerdeki, ortalama %72 kapasite doluluk oranında, toplam 51 adet hayvancılık işletmesi ile yüz yüze veya telefon ile görüşülmüş, yerinde incelemeler ile birlikte veriler toplanmıştır. Çalışma, İzmir, Aydın, Denizli, Isparta ve Burdur illerinin dışındaki illerde bulunan işletme sahipleriyle (%18) telefonla görüşülerek yürütülmüştür. Bu kapsamda işletme sahiplerinin, eğitimleri, tecrübeleri, makina varlıkları, elektrik enerjisi tüketimleri, işçilik süreleri, makina teknik özellikleri gibi bilgiler toplanmış, yorumlanmış ve değerlendirilmiştir. İşletmelerin ortalama süt verimi 21.87 L çıkarken, minimum ve maksimum değerler sırasıyla 14.29 ve 37.5 L olarak belirlenmiştir. İşletmelerin sağmal hayvan başına ortalama aylık elektrik enerjisi kullanımları 91.3 kWh, 1 L süt üretimi için 3.4 kWh olarak bulunmuştur. Sonuç olarak işletmelerin büyüklük ve farklı parametrelere göre elektrik enerjisi kullanımları grafikler ile açıklanmış, birim tüketimler hesaplanmıştır. Çalışma, bu konuda yapılacak daha detaylı araştırmalara ihtiyaç duyulduğunu ortaya koymuştur ve yapılacak sonraki araştırmalara ışık tutacağı düşünülmektedir.
- Open Access
- 2 February 2023
- Published by MDPI AG in Horticulturae
- Vol. 9 (2) , 186
Investigation of Color and Bioactive Compounds of Different Colors from Pansy (Viola × wittrockiana Gams.) Dried in Hot Air Dryer
The popularity of edible flowers is increasing day by day and new solutions are sought due to their short shelf life. For this purpose, in this study, four different colors of Viola × wittrockiana Gams.; white (Fino Clear White), orange (Delta Pure Orange), bordeaux/mauve rose (Mammoth Rocky Rose), and yellow (Delta Premium Pure Lemon) flowers were dried at drying air temperature of 60, 70, and 80 °C with a convective hot air dryer. Color (L*, a*, b*, C*, h°, ∆E, and BI), drying time and bioactive compounds (Total Phenolic Content (TPC), anthocyanin content (AC), and antioxidant activity (AO) values were measured). The orange flowers showed the fastest drying (78 min at 80 °C). The lowest total color change (∆E) (4.58 at 70 °C) and browning index (BI) (9.58 at 60 °C) values were observed in all drying processes of white flowers. The highest AC was determined in bordeaux flowers in both fresh (2.4 mg malvidin glucoside/g) and dried (25.57 mg malvidin glucoside/g at 60 °C) samples. The AO decreased in all samples depending on the temperature increase, it was found that the most beneficial result in terms of bioactive compounds was the bordeaux flowers dried at drying air temperature of 60 °C.
- 2 February 2023
- Published by MDPI AG in Horticulturae
- Vol. 9 (2) , 186
Open AccessInvestigation of Color and Bioactive Compounds of Different Colors from Pansy (Viola × wittrockiana Gams.) Dried in Hot Air Dryer
The popularity of edible flowers is increasing day by day and new solutions are sought due to their short shelf life. For this purpose, in this study, four different colors of Viola × wittrockiana Gams.; white (Fino Clear White), orange (Delta Pure Orange), bordeaux/mauve rose (Mammoth Rocky Rose), and yellow (Delta Premium Pure Lemon) flowers were dried at drying air temperature of 60, 70, and 80 °C with a convective hot air dryer. Color (L*, a*, b*, C*, h°, ∆E, and BI), drying time and bioactive compounds (Total Phenolic Content (TPC), anthocyanin content (AC), and antioxidant activity (AO) values were measured). The orange flowers showed the fastest drying (78 min at 80 °C). The lowest total color change (∆E) (4.58 at 70 °C) and browning index (BI) (9.58 at 60 °C) values were observed in all drying processes of white flowers. The highest AC was determined in bordeaux flowers in both fresh (2.4 mg malvidin glucoside/g) and dried (25.57 mg malvidin glucoside/g at 60 °C) samples. The AO decreased in all samples depending on the temperature increase, it was found that the most beneficial result in terms of bioactive compounds was the bordeaux flowers dried at drying air temperature of 60 °C.
- Open Access
- 31 October 2022
- Published by KSU Journal of Agriculture and Nature in Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi
- Vol. 25 (5) , 1134-1145
Using Gene Expression Programming (GEP) for Modelling the Drying Characteristics of Onion Slices (Allium Cepa)
In this study, the drying properties of onion slices were experimentally investigated under the different drying temperatures of 45, 50, 55, and 60°C for different thicknesses of 2, 3, 4, and 5mm. The drying characteristics of the onion slices were significantly influenced by drying temperature. Thin slices with higher temperature dried in the shortest time while thick slices with low temperature took longer to dry. In modeling drying curves, the moisture ratio values of the onion slices were compared with five models commonly used in the literature. In addition, Gene Expression Programming (GEP) was used to model the drying characteristics of the onion slices, and mathematical formulas were derived to calculate moisture ratio values. The results indicated that the moisture ratio values predicted by all models agreed with the experimental moisture ratio values for onion slice samples at different temperatures. The scientific findings we obtained here showed that the two model provided a better simulation of onion slice drying kinetics than other models in different experimental temperature and thickness ranges. Also, the GEP model was able to usefully determine the moisture ratio of onion slices with appropriate accuracy in a shorter time without the need for complicated formulas.
- 31 October 2022
- Published by KSU Journal of Agriculture and Nature in Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi
- Vol. 25 (5) , 1134-1145
Open AccessUsing Gene Expression Programming (GEP) for Modelling the Drying Characteristics of Onion Slices (Allium Cepa)
In this study, the drying properties of onion slices were experimentally investigated under the different drying temperatures of 45, 50, 55, and 60°C for different thicknesses of 2, 3, 4, and 5mm. The drying characteristics of the onion slices were significantly influenced by drying temperature. Thin slices with higher temperature dried in the shortest time while thick slices with low temperature took longer to dry. In modeling drying curves, the moisture ratio values of the onion slices were compared with five models commonly used in the literature. In addition, Gene Expression Programming (GEP) was used to model the drying characteristics of the onion slices, and mathematical formulas were derived to calculate moisture ratio values. The results indicated that the moisture ratio values predicted by all models agreed with the experimental moisture ratio values for onion slice samples at different temperatures. The scientific findings we obtained here showed that the two model provided a better simulation of onion slice drying kinetics than other models in different experimental temperature and thickness ranges. Also, the GEP model was able to usefully determine the moisture ratio of onion slices with appropriate accuracy in a shorter time without the need for complicated formulas.
- Open Access
- 14 August 2022
- Published by MDPI AG in Agriculture
- Vol. 12 (8) , 1224
Effects of Convective Drying of Quince Fruit (Cydonia oblonga) on Color, Antioxidant Activity and Phenolic Compounds under Various Fruit Juice Dipping Pre-Treatments
In this study, 3 mm thick quince slices were dipped in bitter orange (BO), tangerine (Citrus deliciosa Mediterranean) (CDM), orange (O), tangerine (Citrus reticulata Owari) (CRO), pomegranate (P) juices and a non-pre-treatment (control) dried at an air temperature of 70 °C and air velocity of 1.5 m/s. According to the results of the pre-treatment trials, drying time was found to be a minimum of 121 min in pomegranate at 5 min dipping time to reach a safe moisture content of 10% (w.b.). The lowest total color change (∆E) values were observed in orange juice dipped samples (10.19). We found the highest total phenolics (TP) (16.77 mg GAE/g d.w.) in CDM, Trolox equivalent antioxidant capacity (TEAC) (32.49 µmol TE/g d.w.) in P and total flavonoid (TF) (2018.15 mg GAE/kg d.w.) in BO for 5 min dipping time values. As a result, pomegranate juice pre-treatment in all dipping times improved the biocompounds for quince slices.
- 14 August 2022
- Published by MDPI AG in Agriculture
- Vol. 12 (8) , 1224
Open AccessEffects of Convective Drying of Quince Fruit (Cydonia oblonga) on Color, Antioxidant Activity and Phenolic Compounds under Various Fruit Juice Dipping Pre-Treatments
In this study, 3 mm thick quince slices were dipped in bitter orange (BO), tangerine (Citrus deliciosa Mediterranean) (CDM), orange (O), tangerine (Citrus reticulata Owari) (CRO), pomegranate (P) juices and a non-pre-treatment (control) dried at an air temperature of 70 °C and air velocity of 1.5 m/s. According to the results of the pre-treatment trials, drying time was found to be a minimum of 121 min in pomegranate at 5 min dipping time to reach a safe moisture content of 10% (w.b.). The lowest total color change (∆E) values were observed in orange juice dipped samples (10.19). We found the highest total phenolics (TP) (16.77 mg GAE/g d.w.) in CDM, Trolox equivalent antioxidant capacity (TEAC) (32.49 µmol TE/g d.w.) in P and total flavonoid (TF) (2018.15 mg GAE/kg d.w.) in BO for 5 min dipping time values. As a result, pomegranate juice pre-treatment in all dipping times improved the biocompounds for quince slices.
- 15 September 2021
- Published by Yuzuncu Yil Universitesi Tarim Bilimleri Dergisi in Yüzüncü Yıl Üniversitesi Tarım Bilimleri Dergisi
- Vol. 31 (3) , 786-798
Türkiye’de Tarımsal Mekanizasyona Bir Bakış
Tarihsel süreci içerisinde tarımsal mekanizasyon, kas gücüyle başlayıp teknolojinin de yardımıyla gelişmiş sensör uygulamaları, dronlar ve otonom traktöre kadar evrilmiştir. Temel gıda ihtiyacının sağlanması, maliyetin düşürülmesi, işçilik sorunlarının ortadan kaldırması ve birim alandan daha yüksek verim elde edilmesi gibi nedenlerden dolayı tarımsal mekanizasyonun önemi gün geçtikçe artmaktadır. Bu çalışmanın amacı; Ülkemizdeki tarımsal mekanizasyonun mevcut durumunu değerlendirmektir. Bu değerlendirmede traktör sayıları, biçerdöver sayıları ve yaş grupları, tarım makinalarının yıllara göre değişimi, ithalat ve ihracat değerleri ile önemli tarımsal mekanizasyon göstergelerinin yıllara göre değişimi incelenmiştir. Ülkemizde 1988 yılında 654 636 adet traktör bulunurken, 2018 yılına gelindiğinde bu rakam 1 332 139’a ulaşmıştır. 2000 yılında 12 578 adet biçerdöver bulunurken bu değer 2018 yılında 17 266 olarak yaklaşık % 37 artmıştır. Yıllara göre tarımsal mekanizasyonda, meyve hasat makinaları, pamuk toplama makinası, motorlu tırpan ve yem dağıtıcı römorklarda artış görülürken, hayvanla çekilen hububat ekim makinası, tarımsal mücadele uçağı, döven, karasaban ve hayvan pulluğu sayılarında ciddi azalmalar meydana gelmiştir. 2001 – 2018 yılları arasında tarımsal mekanizasyon ekipmanlarındaki ithalat ve ihracat değerleri göz önüne alındığında, 2001 yılında ithalat değeri ihracat değerinin yaklaşık 2 katı iken 2016 yılında bu değer neredeyse eşitlenmiş, 2018 yılında ise ihracat değeri ithalat değerinin yaklaşık 1.4 katına çıkmıştır.
- 15 September 2021
- Published by Yuzuncu Yil Universitesi Tarim Bilimleri Dergisi in Yüzüncü Yıl Üniversitesi Tarım Bilimleri Dergisi
- Vol. 31 (3) , 786-798
Türkiye’de Tarımsal Mekanizasyona Bir Bakış
Tarihsel süreci içerisinde tarımsal mekanizasyon, kas gücüyle başlayıp teknolojinin de yardımıyla gelişmiş sensör uygulamaları, dronlar ve otonom traktöre kadar evrilmiştir. Temel gıda ihtiyacının sağlanması, maliyetin düşürülmesi, işçilik sorunlarının ortadan kaldırması ve birim alandan daha yüksek verim elde edilmesi gibi nedenlerden dolayı tarımsal mekanizasyonun önemi gün geçtikçe artmaktadır. Bu çalışmanın amacı; Ülkemizdeki tarımsal mekanizasyonun mevcut durumunu değerlendirmektir. Bu değerlendirmede traktör sayıları, biçerdöver sayıları ve yaş grupları, tarım makinalarının yıllara göre değişimi, ithalat ve ihracat değerleri ile önemli tarımsal mekanizasyon göstergelerinin yıllara göre değişimi incelenmiştir. Ülkemizde 1988 yılında 654 636 adet traktör bulunurken, 2018 yılına gelindiğinde bu rakam 1 332 139’a ulaşmıştır. 2000 yılında 12 578 adet biçerdöver bulunurken bu değer 2018 yılında 17 266 olarak yaklaşık % 37 artmıştır. Yıllara göre tarımsal mekanizasyonda, meyve hasat makinaları, pamuk toplama makinası, motorlu tırpan ve yem dağıtıcı römorklarda artış görülürken, hayvanla çekilen hububat ekim makinası, tarımsal mücadele uçağı, döven, karasaban ve hayvan pulluğu sayılarında ciddi azalmalar meydana gelmiştir. 2001 – 2018 yılları arasında tarımsal mekanizasyon ekipmanlarındaki ithalat ve ihracat değerleri göz önüne alındığında, 2001 yılında ithalat değeri ihracat değerinin yaklaşık 2 katı iken 2016 yılında bu değer neredeyse eşitlenmiş, 2018 yılında ise ihracat değeri ithalat değerinin yaklaşık 1.4 katına çıkmıştır.