Vincent Rienzi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vincent Rienzi has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Hsun-Ming Chang
Department of Electrical and Computer Engineering, University of California, Santa Barbara, CA 93106, USA
3 shared publications - Michael J. Gordon
Institute for Collaborative Biotechnologies
3 shared publications - Philip Chan
Department of Electrical and Computer Engineering, University of California 2 , Santa Barbara, California 93106, USA
3 shared publications - Shuji Nakamura
Materials Department, University of California 1 , Santa Barbara, California 93106
3 shared publications - Steven DenBaars
Department of Electrical and Computer Engineering, University of California, Santa Barbara, CA, USA
3 shared publications - Norleakvisoth Lim
Department of Chemical Engineering, University of California, Santa Barbara, CA 93106, USA
2 shared publications
Latest Publications
- Open Access
InGaN Based C-Plane Blue Laser Diodes on Strain Relaxed Template with Reduced Absorption Loss
InGaN based c-plane blue LDs on strain relaxed template (SRT) with a reduced absorption loss was demonstrated. The loss is reduced from 27 cm−1 to 20 cm−1. Due to the lower loss, threshold current density is improved from 51.1 kA/cm2 to 43.7 kA/cm2, and slope efficiency is also increased by a factor of 1.22. The absorption loss from decomposition layer (DL) in SRT is confirmed to be a major extra loss source by both experimental and simulation results. With a higher indium content in buffer and waveguide layers, optical leakage into DL can be suppressed.
Open AccessInGaN Based C-Plane Blue Laser Diodes on Strain Relaxed Template with Reduced Absorption Loss
InGaN based c-plane blue LDs on strain relaxed template (SRT) with a reduced absorption loss was demonstrated. The loss is reduced from 27 cm−1 to 20 cm−1. Due to the lower loss, threshold current density is improved from 51.1 kA/cm2 to 43.7 kA/cm2, and slope efficiency is also increased by a factor of 1.22. The absorption loss from decomposition layer (DL) in SRT is confirmed to be a major extra loss source by both experimental and simulation results. With a higher indium content in buffer and waveguide layers, optical leakage into DL can be suppressed.
- Open Access
Demonstration of C-Plane InGaN-Based Blue Laser Diodes Grown on a Strain-Relaxed Template
Electrically driven c-plane InGaN-based blue edge emitting laser diodes on a strain-relaxed template (SRT) are successfully demonstrated. The relaxation degree of the InGaN buffer was 26.6%, and the root mean square (RMS) roughness of the surface morphology was 0.65 nm. The laser diodes (LDs) on the SRT laser at 459 nm had a threshold current density of 52 kA/cm2 under the room temperature pulsed operation. The internal loss of the LDs on the SRT was 30–35 cm−1. Regardless of the high threshold current density, this is the first demonstrated laser diode using the strain-relaxed method on c-plane GaN.
Open AccessDemonstration of C-Plane InGaN-Based Blue Laser Diodes Grown on a Strain-Relaxed Template
Electrically driven c-plane InGaN-based blue edge emitting laser diodes on a strain-relaxed template (SRT) are successfully demonstrated. The relaxation degree of the InGaN buffer was 26.6%, and the root mean square (RMS) roughness of the surface morphology was 0.65 nm. The laser diodes (LDs) on the SRT laser at 459 nm had a threshold current density of 52 kA/cm2 under the room temperature pulsed operation. The internal loss of the LDs on the SRT was 30–35 cm−1. Regardless of the high threshold current density, this is the first demonstrated laser diode using the strain-relaxed method on c-plane GaN.
- Open Access
Demonstration of III-Nitride Red LEDs on Si Substrates via Strain-Relaxed Template by InGaN Decomposition Layer
A III-nitride red LED with an active region temperature of 835 °C on a Si substrate utilizing a strain-relaxed template (SRT) is demonstrated. The peak wavelength blueshifts from 670 nm at 1 A/cm2 to 636 nm at 150 A/cm2. The on-wafer external quantum efficiency was 0.021% at 7 A/cm2 with an emission wavelength of 655 nm. The LED grown on a Si substrate exhibited a 116 nm redshift when compared to a co-loaded LED grown on sapphire. This is attributed to the difference in strain state for the III-nitride layers grown on Si compared to sapphire, allowing for more indium to be incorporated in the LED grown on Si. This suggests efficient III-nitride red LEDs and µLEDs on Si with a SRT can be realized with further material, device structure, and processing optimizations.
Open AccessDemonstration of III-Nitride Red LEDs on Si Substrates via Strain-Relaxed Template by InGaN Decomposition Layer
A III-nitride red LED with an active region temperature of 835 °C on a Si substrate utilizing a strain-relaxed template (SRT) is demonstrated. The peak wavelength blueshifts from 670 nm at 1 A/cm2 to 636 nm at 150 A/cm2. The on-wafer external quantum efficiency was 0.021% at 7 A/cm2 with an emission wavelength of 655 nm. The LED grown on a Si substrate exhibited a 116 nm redshift when compared to a co-loaded LED grown on sapphire. This is attributed to the difference in strain state for the III-nitride layers grown on Si compared to sapphire, allowing for more indium to be incorporated in the LED grown on Si. This suggests efficient III-nitride red LEDs and µLEDs on Si with a SRT can be realized with further material, device structure, and processing optimizations.