Yixing Gu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yixing Gu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Zhongyuan Zhou
Research Center for Electromagnetic Environmental Effects, School of Mechanical Engineering, Southeast University, Nanjing, China
10 shared publications - Mingjie Sheng
Research Center for Electromagnetic Environmental Effects, School of Mechanical Engineering, Southeast University 1 , Nanjing 211189
7 shared publications - Qi Zhou
Research Center for Electromagnetic Environmental Effects, School of Mechanical Engineering, Southeast University, Nanjing, China
6 shared publications - Jinjing Ren
Research Center for Electromagnetic Environmental Effects, School of Mechanical Engineering, Southeast University, Nanjing, China
3 shared publications - Peng Hu
National Key Laboratory of Microwave Photonics, College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
3 shared publications - Bingnan Xing
Nanjing Innovation Center
2 shared publications
Latest Publications
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9539714
Time–Frequency Combined Performance Evaluation and Optimization Design for the Inductive Current Injection Couplers in HEMP Immunity Measurement
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9539714
Time–Frequency Combined Performance Evaluation and Optimization Design for the Inductive Current Injection Couplers in HEMP Immunity Measurement
- 14 December 2024
- Published by Elsevier in Measurement
- Vol. 244
Study of the method of electromagnetic parameters test of conductive rubber
- 14 December 2024
- Published by Elsevier in Measurement
- Vol. 244
Study of the method of electromagnetic parameters test of conductive rubber
- 7 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (1) , 351-361
Research on Simulation Algorithm of Bounded Wave Simulator Based on Nonuniform Multiconductor Transmission Lines and Electric Dipole Theory
This paper analyzes the E-field response in the test volume of bounded wave simulator (BWS) in time domain (TD) based on non-uniform multi-conductor transmission lines (NMTL) and electric dipole theory. First, the transmission lines (TL) in BWS are modeled as a NMTL system and divided into a certain number of cascaded uniform multi-conductor transmission lines (MTL). Second, the current distribution in frequency domain (FD) along the TLs of BWS is determined based on the theory of MTL and the chain parameter matrix (CPM) when sinusoidal continuous wave signals of different frequencies are fed into BWS. Third, the E-field at field point of the test area of BWS is calculated by summing the E-field radiated by all the currents on the TLs in BWS via the electric dipole theory. Finally, the E-field response in TD is solved via discrete Fourier transform (DFT) and inverse discrete Fourier transform (IDFT). The validity of the proposed algorithm is investigated by analyzing an example of BWS, which is measured experimentally. It has been shown from the established results that the proposed method leads to an effective technique for analyzing the E-field response in the test volume of BWS. Related research in this paper can provide some guidance in the analysis of BWS and transient electromagnetic field radiation sensitivity test (RS 105).
- 7 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (1) , 351-361
Research on Simulation Algorithm of Bounded Wave Simulator Based on Nonuniform Multiconductor Transmission Lines and Electric Dipole Theory
This paper analyzes the E-field response in the test volume of bounded wave simulator (BWS) in time domain (TD) based on non-uniform multi-conductor transmission lines (NMTL) and electric dipole theory. First, the transmission lines (TL) in BWS are modeled as a NMTL system and divided into a certain number of cascaded uniform multi-conductor transmission lines (MTL). Second, the current distribution in frequency domain (FD) along the TLs of BWS is determined based on the theory of MTL and the chain parameter matrix (CPM) when sinusoidal continuous wave signals of different frequencies are fed into BWS. Third, the E-field at field point of the test area of BWS is calculated by summing the E-field radiated by all the currents on the TLs in BWS via the electric dipole theory. Finally, the E-field response in TD is solved via discrete Fourier transform (DFT) and inverse discrete Fourier transform (IDFT). The validity of the proposed algorithm is investigated by analyzing an example of BWS, which is measured experimentally. It has been shown from the established results that the proposed method leads to an effective technique for analyzing the E-field response in the test volume of BWS. Related research in this paper can provide some guidance in the analysis of BWS and transient electromagnetic field radiation sensitivity test (RS 105).
- 29 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 66 (3) , 694-705
Calculation of ATEM Cell Characteristic Impedance Based on Static Field Approximation and MoM
This article proposes a numerical algorithm for the evaluation of the characteristic impedance of transverse electromagnetic (TEM) and asymmetrical TEM (ATEM) cells based on the method of moment and static field approximation. The correctness of the calculation result is verified by testing for developed TEM and ATEM cells within an acceptable margin of error.
- 29 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 66 (3) , 694-705
Calculation of ATEM Cell Characteristic Impedance Based on Static Field Approximation and MoM
This article proposes a numerical algorithm for the evaluation of the characteristic impedance of transverse electromagnetic (TEM) and asymmetrical TEM (ATEM) cells based on the method of moment and static field approximation. The correctness of the calculation result is verified by testing for developed TEM and ATEM cells within an acceptable margin of error.
- 6 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 66 (2) , 463-472
Analysis on Characteristic Impedance and E-Field Distribution of Wired Structural Bounded Wave Simulator
This article analyzes the characteristic impedance and peak E-field distribution in time domain of the cross section in wired structural bounded wave simulator (BWS) based on method of moments (MoM). First, the static field assumption has been taken into account in electromagnetic modeling. Second, the charge distribution is solved based on MoM. Third, the characteristic impedance and the peak E-field distribution are derived from previous analysis. Measurements of the developed BWS indicates that analysis of characteristic impedance and peak E-field in this article agrees with the test results to some extent. Related research can provide some guidance in the design of BWS and the radiated susceptibility test.
- 6 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 66 (2) , 463-472
Analysis on Characteristic Impedance and E-Field Distribution of Wired Structural Bounded Wave Simulator
This article analyzes the characteristic impedance and peak E-field distribution in time domain of the cross section in wired structural bounded wave simulator (BWS) based on method of moments (MoM). First, the static field assumption has been taken into account in electromagnetic modeling. Second, the charge distribution is solved based on MoM. Third, the characteristic impedance and the peak E-field distribution are derived from previous analysis. Measurements of the developed BWS indicates that analysis of characteristic impedance and peak E-field in this article agrees with the test results to some extent. Related research can provide some guidance in the design of BWS and the radiated susceptibility test.
- 19 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-7
Radiated Susceptibility Assessment of Interconnected Systems Within Dual Reverberation Chamber
The interconnected systems (ISs) are commonly exposed to electromagnetic environments with different maximum field levels, and the measurement technique on how to perform radiated susceptibility (RS) test is one of the most attractive research topics of the electromagnetic compatibility (EMC) community. In this work, the dual reverberation chamber (DRC) is used to reveal the potential EMC issues of the IS, which also provides a comparison with the RS tests performed in a conventional RC. By using a typical IS on the ship, we highlight the evidence supporting IS to conduct the RS tests in the DRC. Taken together, the results show that the IS will be more sensitive within the DRC and expose more acute EMC problems on one hand; on the other hand, the IS also presents a larger probability of sensitivity.
- 19 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-7
Radiated Susceptibility Assessment of Interconnected Systems Within Dual Reverberation Chamber
The interconnected systems (ISs) are commonly exposed to electromagnetic environments with different maximum field levels, and the measurement technique on how to perform radiated susceptibility (RS) test is one of the most attractive research topics of the electromagnetic compatibility (EMC) community. In this work, the dual reverberation chamber (DRC) is used to reveal the potential EMC issues of the IS, which also provides a comparison with the RS tests performed in a conventional RC. By using a typical IS on the ship, we highlight the evidence supporting IS to conduct the RS tests in the DRC. Taken together, the results show that the IS will be more sensitive within the DRC and expose more acute EMC problems on one hand; on the other hand, the IS also presents a larger probability of sensitivity.
- 15 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (9) , 3874-3881
Design of Transfer Impedance Measurement Fixture of EMI Gaskets Up to 18 GHz
To achieve the transfer impedance measurement of electromagnetic interference (EMI) gaskets, a fixture useful up to 18 GHz is developed based on the SAE ARP1705C standard. The radial size of the coaxial section of the fixture is shaped from the perspective of its characteristic impedance and suppression of higher-order modes. Subsequently, a parametric analysis is performed to examine the sensitivity of critical dimensions, and the study analyzes the key factors affecting the voltage standing wave ratio (VSWR) of the fixture and its 50 $\Omega$ resistor. Based on the preceding analysis, two solutions are proposed to improve the VSWR: reducing the length of the 50 $\Omega$ resistor and modifying the shape of the coaxial outer conductor. The ultimate outcome of the transfer impedance measurement fixture yields a VSWR lower than 2.6:1, up to 18 GHz. The functionality of the fixture is demonstrated through the measurement of two gaskets, showcasing its practical utility in engineering applications.
- 15 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (9) , 3874-3881
Design of Transfer Impedance Measurement Fixture of EMI Gaskets Up to 18 GHz
To achieve the transfer impedance measurement of electromagnetic interference (EMI) gaskets, a fixture useful up to 18 GHz is developed based on the SAE ARP1705C standard. The radial size of the coaxial section of the fixture is shaped from the perspective of its characteristic impedance and suppression of higher-order modes. Subsequently, a parametric analysis is performed to examine the sensitivity of critical dimensions, and the study analyzes the key factors affecting the voltage standing wave ratio (VSWR) of the fixture and its 50 $\Omega$ resistor. Based on the preceding analysis, two solutions are proposed to improve the VSWR: reducing the length of the 50 $\Omega$ resistor and modifying the shape of the coaxial outer conductor. The ultimate outcome of the transfer impedance measurement fixture yields a VSWR lower than 2.6:1, up to 18 GHz. The functionality of the fixture is demonstrated through the measurement of two gaskets, showcasing its practical utility in engineering applications.
- 9 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 64 (6) , 2104-2112
An Algorithm for Fast Simulation of CW Illuminator
The continuous wave (CW) illuminator is aimed to simulate high-altitude nuclear electromagnetic pulse. In this article, a simulation algorithm is proposed covering the method of moments and finite difference method (FDM), with the high-speed simulation of the CW illuminator with arbitrary ellipse size, arbitrary loading, and arbitrary polarization direction. Based on the surface electric field equation of the CW illuminator, the mathematical model is established with the vector potential equation and the boundary conditions. In this model, the pulse function and $\delta$ function are set as the basis function and the weight function, respectively, for the establishment of the current equation, with the current distribution determined by the simplification equation with image theory and nonuniform FDM. Finally, as the field distribution is determined by the superposition theorem. The simulation algorithm is verified by the self-built CW illuminator.
- 9 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 64 (6) , 2104-2112
An Algorithm for Fast Simulation of CW Illuminator
The continuous wave (CW) illuminator is aimed to simulate high-altitude nuclear electromagnetic pulse. In this article, a simulation algorithm is proposed covering the method of moments and finite difference method (FDM), with the high-speed simulation of the CW illuminator with arbitrary ellipse size, arbitrary loading, and arbitrary polarization direction. Based on the surface electric field equation of the CW illuminator, the mathematical model is established with the vector potential equation and the boundary conditions. In this model, the pulse function and $\delta$ function are set as the basis function and the weight function, respectively, for the establishment of the current equation, with the current distribution determined by the simplification equation with image theory and nonuniform FDM. Finally, as the field distribution is determined by the superposition theorem. The simulation algorithm is verified by the self-built CW illuminator.
- 19 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 64 (6) , 2033-2041
Optimized Design of Illuminator With Nonuniform Loading
This article is aimed to optimize the loading configuration for the continuous-wave (CW) illuminator with horizontal polarization via the optimization algorithm. The working principle of the CW illuminator is introduced, with the difference between the illuminator with vertical polarization and that with horizontal polarization discussed. As the loading consisting of ferrite bead and resistance is analyzed and selected, the impedance with frequency of the loading is determined. Furthermore, the nonuniform loading configuration is studied. In this process, both the oscillators are divided into ten regions symmetrically, with each region loaded with different loading densities. Based on the dimension parameter of the loading, the upper limits for the loading density are determined. The loading configuration is optimized with the genetic algorithm and the particle swarm optimization algorithm. Then, the optimized design is verified by the self-built CW illuminator, and the deviation of the simulation and test is analyzed for the electromagnetic field of the illuminator.
- 19 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 64 (6) , 2033-2041
Optimized Design of Illuminator With Nonuniform Loading
This article is aimed to optimize the loading configuration for the continuous-wave (CW) illuminator with horizontal polarization via the optimization algorithm. The working principle of the CW illuminator is introduced, with the difference between the illuminator with vertical polarization and that with horizontal polarization discussed. As the loading consisting of ferrite bead and resistance is analyzed and selected, the impedance with frequency of the loading is determined. Furthermore, the nonuniform loading configuration is studied. In this process, both the oscillators are divided into ten regions symmetrically, with each region loaded with different loading densities. Based on the dimension parameter of the loading, the upper limits for the loading density are determined. The loading configuration is optimized with the genetic algorithm and the particle swarm optimization algorithm. Then, the optimized design is verified by the self-built CW illuminator, and the deviation of the simulation and test is analyzed for the electromagnetic field of the illuminator.