Noor H. Jawad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Noor H. Jawad has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Ali Amer Yahya
Membrane Technology Research Unit, Chemical Engineering Department, University of Technology, Alsinaa Street 52, Baghdad 10066, Iraq
2 shared publications - Khalid Turki Rashid
Membrane Technology Research Unit, College of Chemical Engineering, University of Technology-Iraq, Al Sinaa Street 52, 10066 Baghdad, Iraq
2 shared publications - Qusay Fadhil Alsalhy
Membrane Technology Research Unit, Chemical Engineering Department, University of Technology-Iraq, Alsinaa Street 52, Baghdad 10066, Iraq
2 shared publications - Saad Al-Saadi
Department of Chemical and Biological Engineering, Monash University, Clayton, VIC 3800, Australia
2 shared publications - Adel Zrelli
Research Unit Advanced Materials, Applied Mechanics, Innovative Processes and Environment, UR22ES04, Higher Institute of Applied Sciences and Technology of Gabes (ISSAT), University of Gabes, Gabes, Tunisia
1 shared publication - Adnan AbdulJabbar AbdulRazak
Department of Oil and Gas Refining Engineering, College of Engineering, Al-Turath University, Baghdad, Iraq
1 shared publication
Latest Publications
- Open Access
- 7 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (21) , 14653
Fuel Cell Types, Properties of Membrane, and Operating Conditions: A Review
Fuel cells have lately received growing attention since they allow the use of non-precious metals as catalysts, which reduce the cost per kilowatt of power in fuel cell devices to some extent. Until recent years, the major barrier in the development of fuel cells was the obtainability of highly conductive anion exchange membranes (AEMs). On the other hand, improvements show that newly enhanced anion exchange membranes have already reached high conductivity levels, leading to the suitable presentation of the cell. Currently, an increasing number of studies have described the performance results of fuel cells. Much of the literature reporting cell performance is founded on hydrogen‒anion exchange membrane fuel cells (AEMFCs), though a growing number of studies have also reported utilizing fuels other than hydrogen—such as alcohols, non-alcohol C-based fuels, and N-based fuels. This article reviews the types, performance, utilized membranes, and operational conditions of anion exchange membranes for fuel cells.
- 7 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (21) , 14653
Open AccessFuel Cell Types, Properties of Membrane, and Operating Conditions: A Review
Fuel cells have lately received growing attention since they allow the use of non-precious metals as catalysts, which reduce the cost per kilowatt of power in fuel cell devices to some extent. Until recent years, the major barrier in the development of fuel cells was the obtainability of highly conductive anion exchange membranes (AEMs). On the other hand, improvements show that newly enhanced anion exchange membranes have already reached high conductivity levels, leading to the suitable presentation of the cell. Currently, an increasing number of studies have described the performance results of fuel cells. Much of the literature reporting cell performance is founded on hydrogen‒anion exchange membrane fuel cells (AEMFCs), though a growing number of studies have also reported utilizing fuels other than hydrogen—such as alcohols, non-alcohol C-based fuels, and N-based fuels. This article reviews the types, performance, utilized membranes, and operational conditions of anion exchange membranes for fuel cells.
- Open Access
Modification of Polyethersulfone Ultrafiltration Membrane Using Poly(terephthalic acid-co-glycerol-g-maleic anhydride) as Novel Pore Former
In this research, poly terephthalic acid-co-glycerol-g-maleic anhydride (PTGM) graft co-polymer was used as novel water-soluble pore formers for polyethersulfone (PES) membrane modification. The modified PES membranes were characterized to monitor the effect of PTGM content on their pure water flux, hydrophilicity, porosity, morphological structure, composition, and performance. PTGM and PES/PTGM membranes were characterized by field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR), and contact angle (CA). The results revealed that the porosity and hydrophilicity of the fabricated membrane formed using a 5 wt.% PTGM ratio exhibited an enhancement of 20% and 18%, respectively. Similarly, upon raising the PTGM ratio in the casting solution, a more porous with longer finger-like structure was observed. However, at optimum PTGM content (i.e., 5%), apparent enhancements in the water flux, bovine serum albumin (BSA), and sodium alginate (SA) retention were noticed by values of 203 L/m2.h (LMH), 94, and 96%, respectively. These results illustrated that the observed separation and permeation trend of the PES/PTGM membrane may be a suitable option for applications of wastewater treatment. The experimental results suggest the promising potential of PTGM as a pore former on the membrane properties and performance.
Open AccessModification of Polyethersulfone Ultrafiltration Membrane Using Poly(terephthalic acid-co-glycerol-g-maleic anhydride) as Novel Pore Former
In this research, poly terephthalic acid-co-glycerol-g-maleic anhydride (PTGM) graft co-polymer was used as novel water-soluble pore formers for polyethersulfone (PES) membrane modification. The modified PES membranes were characterized to monitor the effect of PTGM content on their pure water flux, hydrophilicity, porosity, morphological structure, composition, and performance. PTGM and PES/PTGM membranes were characterized by field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR), and contact angle (CA). The results revealed that the porosity and hydrophilicity of the fabricated membrane formed using a 5 wt.% PTGM ratio exhibited an enhancement of 20% and 18%, respectively. Similarly, upon raising the PTGM ratio in the casting solution, a more porous with longer finger-like structure was observed. However, at optimum PTGM content (i.e., 5%), apparent enhancements in the water flux, bovine serum albumin (BSA), and sodium alginate (SA) retention were noticed by values of 203 L/m2.h (LMH), 94, and 96%, respectively. These results illustrated that the observed separation and permeation trend of the PES/PTGM membrane may be a suitable option for applications of wastewater treatment. The experimental results suggest the promising potential of PTGM as a pore former on the membrane properties and performance.
- Open Access
- 12 December 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 454 (1) , 012023
Removal of Methylene Blue by Direct Electrochemical Oxidation Method Using a Graphite Anode
The present work is to degrade methylene blue dye from aqueous solution by direct electrochemical oxidation technique. For this purpose an electrochemical cell was used comprising of two electrodes made from graphite as anode and stainless steel 316 grade as cathode. Different operating parameters that affected the treatment process such as current density, electrolyte temperature and initial dye concentration had also been studied. The reaction mechanism of direct anodic oxidation of M.B. is undertaken and the kinetic follows a pseudo first order reaction. Results revealed that at 20ºC electrolyte temperature, 10 mA/cm2 current density, 0.5 g/l Na2SO4 as supporting electrolyte and 60 min electrolysis time, the decolorization percents for initial concentrations of M.B. 50 and 400 mg/L were 72.51% and 77.94% respectively while at 60ºC the decolorization percent 99.75% and 99.60% respectively for the same others operating conditions. The power consumption increased from 2.055 to 11.714 Kw.h/m3 at applied voltage 14.6 V and 28.5 V respectively.
- 12 December 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 454 (1) , 012023
Open AccessRemoval of Methylene Blue by Direct Electrochemical Oxidation Method Using a Graphite Anode
The present work is to degrade methylene blue dye from aqueous solution by direct electrochemical oxidation technique. For this purpose an electrochemical cell was used comprising of two electrodes made from graphite as anode and stainless steel 316 grade as cathode. Different operating parameters that affected the treatment process such as current density, electrolyte temperature and initial dye concentration had also been studied. The reaction mechanism of direct anodic oxidation of M.B. is undertaken and the kinetic follows a pseudo first order reaction. Results revealed that at 20ºC electrolyte temperature, 10 mA/cm2 current density, 0.5 g/l Na2SO4 as supporting electrolyte and 60 min electrolysis time, the decolorization percents for initial concentrations of M.B. 50 and 400 mg/L were 72.51% and 77.94% respectively while at 60ºC the decolorization percent 99.75% and 99.60% respectively for the same others operating conditions. The power consumption increased from 2.055 to 11.714 Kw.h/m3 at applied voltage 14.6 V and 28.5 V respectively.