Chao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Chao Liu has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
- Chuang Liu
Key Laboratory of Modern Power System Simulation and Control and Renewable Energy Technology, Northeast Electric Power University, Jilin 132012, China
9 shared publications - Di Zhu
College of Electrical Engineering, Northeast Electric Power University, Jilin, China
6 shared publications Zhe Zhang
Hebei University of Technology,State Key Laboratory of Intelligent Power Distribution Equipment and System,Tianjin,China
5 shared publicationsZiwei Ouyang
Technical University of Denmark,Copenhagen,Denmark
5 shared publicationsJiasheng Huang
Technical University of Denmark,Copenhagen,Denmark
4 shared publications- Jingyue Wang
College of Electrical Engineering, Northeast Electric Power University, Jilin, China
4 shared publications
Latest Publications
- 7 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. PP (21686777) , 1
Three-Dimensional PLL Model Considering Frequency-Impedance Coupling for Accurate Whole Process Dynamic Capture and Transient Stability Analysis
Transient synchronization stability of grid-connected converter is critically affected by phase-locked loop (PLL) dynamics. However, frequency-impedance coupling induced by PLL frequency deviation is often neglected in conventional quasi-steady-state (QSS) PLL model, which may lead to an inaccurate post-fault stability assessment. To address this issue, this paper proposes a three-dimensional frequency–impedance coupling (FIC) PLL model that explicitly incorporates frequency drift during faults, enabling whole-process transient stability analysis from fault occurrence to recovery. Based on that, the existence conditions of stable equilibrium points and the evolution of the domain of attraction (DOA) is investigated comprehensively with respect to grid strengths, PLL parameters and fault durations. Furthermore, a DOA-oriented parameter design framework is developed to enhance transient stability. Finally, experimental results on a down-scaled GCC platform validate that the FIC-PLL model provides more accurate stability assessments than conventional QSS models, and the optimized PLL parameters effectively improve transient stability under weak grid conditions.
- 7 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. PP (21686777) , 1
Three-Dimensional PLL Model Considering Frequency-Impedance Coupling for Accurate Whole Process Dynamic Capture and Transient Stability Analysis
Transient synchronization stability of grid-connected converter is critically affected by phase-locked loop (PLL) dynamics. However, frequency-impedance coupling induced by PLL frequency deviation is often neglected in conventional quasi-steady-state (QSS) PLL model, which may lead to an inaccurate post-fault stability assessment. To address this issue, this paper proposes a three-dimensional frequency–impedance coupling (FIC) PLL model that explicitly incorporates frequency drift during faults, enabling whole-process transient stability analysis from fault occurrence to recovery. Based on that, the existence conditions of stable equilibrium points and the evolution of the domain of attraction (DOA) is investigated comprehensively with respect to grid strengths, PLL parameters and fault durations. Furthermore, a DOA-oriented parameter design framework is developed to enhance transient stability. Finally, experimental results on a down-scaled GCC platform validate that the FIC-PLL model provides more accurate stability assessments than conventional QSS models, and the optimized PLL parameters effectively improve transient stability under weak grid conditions.
- 1 April 2026
- Published by Springer Nature
- p. 1-13
Hybrid Energy Infrastructure for Offshore Energy Hubs with On-Turbine Hydrogen Production
- 1 April 2026
- Published by Springer Nature
- p. 1-13
Hybrid Energy Infrastructure for Offshore Energy Hubs with On-Turbine Hydrogen Production
- 12 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (2) , 2847-2859
Single-Stage Multiport Solid-State Transformer Based Medium-Voltage DC Interconnection System and Coordinated Control Strategies
Decentralized integration of distributed generation (DG) units and loads are increasing in the modern distribution grid. Maintaining the power flow and power quality within their accepted limits is a challenging task. This article proposes a medium-voltage dc (MVDC) interconnection system based on the single-stage multiport solid-state transformers (SST). First, the single-stage multiport SST’s coordinated control strategies and energy management method are discussed, aiming at the flexible power flow control between the utility grid, MVDC grid, and the low-voltage ac/dc microgrid. Second, the MVDC controller parameters and SST passive components are optimized based on the impedance interaction characteristics between the two SSTs’ MVDC ports, thereby enhancing the stability margin of the interconnected system. Then, the operation modes of the interconnected system are defined. Finally, the effectiveness of the proposed operation modes and control strategy is verified through a 1-MW simulation platform, while a 1-kW scaled-down experimental prototype is built to further validate the single-stage multiport SST and the MVDC interconnected system.
- 12 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (2) , 2847-2859
Single-Stage Multiport Solid-State Transformer Based Medium-Voltage DC Interconnection System and Coordinated Control Strategies
Decentralized integration of distributed generation (DG) units and loads are increasing in the modern distribution grid. Maintaining the power flow and power quality within their accepted limits is a challenging task. This article proposes a medium-voltage dc (MVDC) interconnection system based on the single-stage multiport solid-state transformers (SST). First, the single-stage multiport SST’s coordinated control strategies and energy management method are discussed, aiming at the flexible power flow control between the utility grid, MVDC grid, and the low-voltage ac/dc microgrid. Second, the MVDC controller parameters and SST passive components are optimized based on the impedance interaction characteristics between the two SSTs’ MVDC ports, thereby enhancing the stability margin of the interconnected system. Then, the operation modes of the interconnected system are defined. Finally, the effectiveness of the proposed operation modes and control strategy is verified through a 1-MW simulation platform, while a 1-kW scaled-down experimental prototype is built to further validate the single-stage multiport SST and the MVDC interconnected system.
- 27 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (1) , 1528-1538
A Dynamic Response Enhanced Model Predictive Control for Bidirectional Dual Active Bridge Converter
Model Predictive Control (MPC) can enhance the dynamic response performance of Dual Active Bridge (DAB) converters, but its strong dependency on model parameters leads to poor system robustness. To address this issue, this paper proposes an ultra-local model based MPC (ULM-MPC) strategy This method establishes a ULM that retains only accurately measurable parameters, categorizes all remaining uncertain parameters as a lumped disturbance, and calculates the lumped disturbance in real-time using parameter identification techniques. Without altering the original control structure, this method eliminates control accuracy degradation caused by model parameter inaccuracies, thereby improving system robustness. Furthermore, building upon dual-phase-shift modulation, the Lagrange multiplier method (LMM) is employed to solve optimal modulation parameters, achieving current stress optimization and enhancing steady-state operational efficiency. Finally, experimental verification is conducted to validate the effectiveness and superiority of the proposed method.
- 27 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (1) , 1528-1538
A Dynamic Response Enhanced Model Predictive Control for Bidirectional Dual Active Bridge Converter
Model Predictive Control (MPC) can enhance the dynamic response performance of Dual Active Bridge (DAB) converters, but its strong dependency on model parameters leads to poor system robustness. To address this issue, this paper proposes an ultra-local model based MPC (ULM-MPC) strategy This method establishes a ULM that retains only accurately measurable parameters, categorizes all remaining uncertain parameters as a lumped disturbance, and calculates the lumped disturbance in real-time using parameter identification techniques. Without altering the original control structure, this method eliminates control accuracy degradation caused by model parameter inaccuracies, thereby improving system robustness. Furthermore, building upon dual-phase-shift modulation, the Lagrange multiplier method (LMM) is employed to solve optimal modulation parameters, achieving current stress optimization and enhancing steady-state operational efficiency. Finally, experimental verification is conducted to validate the effectiveness and superiority of the proposed method.
- 21 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 121-126
Magnetic Integration of Three-Phase Buck Converter With Three-Pointed Star Core Geometry
In this letter, a planar magnetically integrated inductor design method is proposed for a direct coupled three-phase interleaved Buck converter (three-phase IBC) with a three-pointed star (TPS) core geometry. Through a comparative analysis of various magnetic core structures, a TPS core featuring magnetic integration is selected, and the air gap positions are determined to effectively mitigate the eddy current loss on the PCB windings introduced by the fringing flux. Following this, the winding arrangement of the planar inductor is systematically analyzed, and an improved layout scheme is proposed, which significantly improves magnetic coupling and reduces inductor core losses. Finally, a 2 kW three-phase IBC prototype with a peak efficiency of 98.3% is built and tested. The results validate the effectiveness of the proposed design method and its theoretical analysis.
- 21 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 121-126
Magnetic Integration of Three-Phase Buck Converter With Three-Pointed Star Core Geometry
In this letter, a planar magnetically integrated inductor design method is proposed for a direct coupled three-phase interleaved Buck converter (three-phase IBC) with a three-pointed star (TPS) core geometry. Through a comparative analysis of various magnetic core structures, a TPS core featuring magnetic integration is selected, and the air gap positions are determined to effectively mitigate the eddy current loss on the PCB windings introduced by the fringing flux. Following this, the winding arrangement of the planar inductor is systematically analyzed, and an improved layout scheme is proposed, which significantly improves magnetic coupling and reduces inductor core losses. Finally, a 2 kW three-phase IBC prototype with a peak efficiency of 98.3% is built and tested. The results validate the effectiveness of the proposed design method and its theoretical analysis.
- 15 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
GaN-based Partial Power DC-DC Converter with Four-quadrant Operation Capability
Partial power processing is a promising technique for high-efficiency, high-density, and low-cost power conversion. In this paper, a bidirectional/bipolar partial power converter is proposed. A dedicated modulation scheme is developed and analyzed to enable smooth four-quadrant operation. A compact prototype utilizing Gallium Nitride (GaN) devices has been built and tested under 200V/1000W conditions. Experimental results demonstrate that the proposed converter achieves a peak efficiency of nearly 99%.
- 15 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
GaN-based Partial Power DC-DC Converter with Four-quadrant Operation Capability
Partial power processing is a promising technique for high-efficiency, high-density, and low-cost power conversion. In this paper, a bidirectional/bipolar partial power converter is proposed. A dedicated modulation scheme is developed and analyzed to enable smooth four-quadrant operation. A compact prototype utilizing Gallium Nitride (GaN) devices has been built and tested under 200V/1000W conditions. Experimental results demonstrate that the proposed converter achieves a peak efficiency of nearly 99%.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 16 (4) , 3064-3081
Collaborative Operation of Renewable Energy Hydrogen Production Systems Considering Balanced Utilization and Extended Lifespan of Multi-Electrolyzers
To address the challenges of low efficiency, poor economic performance, and limited adaptability in renewable energy–coupled alkaline water electrolysis (AWE) systems, this study proposes a power–state rolling optimization strategy (PSROS) based on a two-stage optimization framework. First, the large-scale AWE system is divided into multiple modules to reduce the variable dimension of the optimization problem. Then, a simplified module-level optimal efficiency model is developed based on the efficiency characteristics of AWE units. Subsequently, multi-objective optimization models are constructed at the module and unit levels, comprehensively considering hydrogen production volume, lifespan degradation, and utilization balancing. Finally, a finite-horizon rolling optimization mechanism is introduced to solve the two-stage optimization problem, improving the continuity and rationality of scheduling decisions at the end of each optimization horizon. Annual case study results demonstrate that, under the non-battery scenario, PSROS improves system efficiency by 9.92%, 11.12%, and 3.81%, and reduces the levelized cost of hydrogen (LCOH) by 4.14, 5.43, and 2.35 CNY/kg compared with the simple start-stop strategy (SSSS), array rotation strategy (ARS), and rolling optimization strategy (ROS), respectively. With battery integration, the system efficiency is further improved by 0.77%, and the LCOH is further reduced by 0.49 CNY/kg.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 16 (4) , 3064-3081
Collaborative Operation of Renewable Energy Hydrogen Production Systems Considering Balanced Utilization and Extended Lifespan of Multi-Electrolyzers
To address the challenges of low efficiency, poor economic performance, and limited adaptability in renewable energy–coupled alkaline water electrolysis (AWE) systems, this study proposes a power–state rolling optimization strategy (PSROS) based on a two-stage optimization framework. First, the large-scale AWE system is divided into multiple modules to reduce the variable dimension of the optimization problem. Then, a simplified module-level optimal efficiency model is developed based on the efficiency characteristics of AWE units. Subsequently, multi-objective optimization models are constructed at the module and unit levels, comprehensively considering hydrogen production volume, lifespan degradation, and utilization balancing. Finally, a finite-horizon rolling optimization mechanism is introduced to solve the two-stage optimization problem, improving the continuity and rationality of scheduling decisions at the end of each optimization horizon. Annual case study results demonstrate that, under the non-battery scenario, PSROS improves system efficiency by 9.92%, 11.12%, and 3.81%, and reduces the levelized cost of hydrogen (LCOH) by 4.14, 5.43, and 2.35 CNY/kg compared with the simple start-stop strategy (SSSS), array rotation strategy (ARS), and rolling optimization strategy (ROS), respectively. With battery integration, the system efficiency is further improved by 0.77%, and the LCOH is further reduced by 0.49 CNY/kg.
- 14 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (3) , 3698-3711
Single-Stage Isolated PV-Battery-Hybrid (PVBH) Cascaded Grid-Connected System Based on Multiplexing Converter
The photovoltaic-battery-hybrid (PVBH) cascaded converter has become an attractive energy integration scheme, which has the advantages of modularity, module-level maximum power point tracking (MPPT) operation, output power without fluctuation components, and so on. However, during the heavy-load demand period at night, the PVBH cascaded converter is idle due to no photovoltaic (PV) power input, resulting in low utilization of the converter. This article proposes a PVBH cascaded grid-connected system by multiplexing converter in its idle state. The proposed system can flexibly be switched to an energy storage (ES) power station that provides active frequency and voltage support for the power grid without additional ES converters, thus improving the asset utilization of the distribution network. First, the structure of the proposed system and the working principles of its cascaded submodules are introduced. Then, the operation mode selection conditions between “PVBH grid-connected mode” and “ES power station mode” of the system are given. Additionally, the corresponding control strategies are designed for the two operation modes of the system. Finally, the effectiveness of the proposed control strategies is verified through a 10-kV/3-MW full-power simulation platform, and a 150-V/1-kW scaled-down experimental prototype is built to further demonstrate the correctness of the proposed system.
- 14 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (3) , 3698-3711
Single-Stage Isolated PV-Battery-Hybrid (PVBH) Cascaded Grid-Connected System Based on Multiplexing Converter
The photovoltaic-battery-hybrid (PVBH) cascaded converter has become an attractive energy integration scheme, which has the advantages of modularity, module-level maximum power point tracking (MPPT) operation, output power without fluctuation components, and so on. However, during the heavy-load demand period at night, the PVBH cascaded converter is idle due to no photovoltaic (PV) power input, resulting in low utilization of the converter. This article proposes a PVBH cascaded grid-connected system by multiplexing converter in its idle state. The proposed system can flexibly be switched to an energy storage (ES) power station that provides active frequency and voltage support for the power grid without additional ES converters, thus improving the asset utilization of the distribution network. First, the structure of the proposed system and the working principles of its cascaded submodules are introduced. Then, the operation mode selection conditions between “PVBH grid-connected mode” and “ES power station mode” of the system are given. Additionally, the corresponding control strategies are designed for the two operation modes of the system. Finally, the effectiveness of the proposed control strategies is verified through a 10-kV/3-MW full-power simulation platform, and a 150-V/1-kW scaled-down experimental prototype is built to further demonstrate the correctness of the proposed system.
- Open Access
- 31 October 2024
- Published by Applied Energy Innovation Institute (AEii) in EnerarXiv
Lab-field multi-energy platform: electrolyzer, redox flow battery, and lithium-ion battery energy storage system
- 31 October 2024
- Published by Applied Energy Innovation Institute (AEii) in EnerarXiv
Open AccessLab-field multi-energy platform: electrolyzer, redox flow battery, and lithium-ion battery energy storage system