Alessandra Slemer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Alessandra Slemer has a total of 217 co-authors. Here are the top co-authors by number of shared publications:
- Emanuele Simioni
INAF-Astronomical Observatory of Padova, Padua, Italy
9 shared publications Vania Da Deppo
Institute for Photonics and Nanotechnologies National Research Council Via Trasea 7 I-35131 Padova Italy
8 shared publicationsDonato Borrelli
Leonardo S.p.A. (Italy)
6 shared publicationsIacopo Ficai Veltroni
Leonardo S.p.A. (Italy)
6 shared publicationsMichele Dami
Leonardo S.p.A. (Italy)
6 shared publications- Cristina Re
INAF-Astronomical Observatory of Padova, Padua, Italy
5 shared publications
Latest Publications
- Open Access
Does Turbulence along the Coronal Current Sheet Drive Ion Cyclotron Waves?
Evidence for the presence of ion cyclotron waves, driven by turbulence, at the boundaries of the current sheet is reported in this paper. By exploiting the full potential of the joint observations performed by Parker Solar Probe and the Metis coronagraph on board Solar Orbiter, local measurements of the solar wind can be linked with the large-scale structures of the solar corona. The results suggest that the dynamics of the current sheet layers generates turbulence, which in turn creates a sufficiently strong temperature anisotropy to make the solar-wind plasma unstable to anisotropy-driven instabilities such as the Alfvén ion-cyclotron, mirror-mode, and firehose instabilities. The study of the polarization state of high-frequency magnetic fluctuations reveals that ion cyclotron waves are indeed present along the current sheet, thus linking the magnetic topology of the remotely imaged coronal source regions with the wave bursts observed in situ. The present results may allow improvement of state-of-the-art models based on the ion cyclotron mechanism, providing new insights into the processes involved in coronal heating.
Open AccessDoes Turbulence along the Coronal Current Sheet Drive Ion Cyclotron Waves?
Evidence for the presence of ion cyclotron waves, driven by turbulence, at the boundaries of the current sheet is reported in this paper. By exploiting the full potential of the joint observations performed by Parker Solar Probe and the Metis coronagraph on board Solar Orbiter, local measurements of the solar wind can be linked with the large-scale structures of the solar corona. The results suggest that the dynamics of the current sheet layers generates turbulence, which in turn creates a sufficiently strong temperature anisotropy to make the solar-wind plasma unstable to anisotropy-driven instabilities such as the Alfvén ion-cyclotron, mirror-mode, and firehose instabilities. The study of the polarization state of high-frequency magnetic fluctuations reveals that ion cyclotron waves are indeed present along the current sheet, thus linking the magnetic topology of the remotely imaged coronal source regions with the wave bursts observed in situ. The present results may allow improvement of state-of-the-art models based on the ion cyclotron mechanism, providing new insights into the processes involved in coronal heating.
- Open Access
- 1 February 2023
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 944 (2) , 227
Does Turbulence along the Coronal Current Sheet Drive Ion Cyclotron Waves?
Evidence for the presence of ion cyclotron waves (ICWs), driven by turbulence, at the boundaries of the current sheet is reported in this paper. By exploiting the full potential of the joint observations performed by Parker Solar Probe and the Metis coronagraph on board Solar Orbiter, local measurements of the solar wind can be linked with the large-scale structures of the solar corona. The results suggest that the dynamics of the current sheet layers generates turbulence, which in turn creates a sufficiently strong temperature anisotropy to make the solar-wind plasma unstable to anisotropy-driven instabilities such as the Alfvén ion cyclotron, mirror-mode, and firehose instabilities. The study of the polarization state of high-frequency magnetic fluctuations reveals that ICWs are indeed present along the current sheet, thus linking the magnetic topology of the remotely imaged coronal source regions with the wave bursts observed in situ. The present results may allow improvement of state-of-the-art models based on the ion cyclotron mechanism, providing new insights into the processes involved in coronal heating.
- 1 February 2023
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 944 (2) , 227
Open AccessDoes Turbulence along the Coronal Current Sheet Drive Ion Cyclotron Waves?
Evidence for the presence of ion cyclotron waves (ICWs), driven by turbulence, at the boundaries of the current sheet is reported in this paper. By exploiting the full potential of the joint observations performed by Parker Solar Probe and the Metis coronagraph on board Solar Orbiter, local measurements of the solar wind can be linked with the large-scale structures of the solar corona. The results suggest that the dynamics of the current sheet layers generates turbulence, which in turn creates a sufficiently strong temperature anisotropy to make the solar-wind plasma unstable to anisotropy-driven instabilities such as the Alfvén ion cyclotron, mirror-mode, and firehose instabilities. The study of the polarization state of high-frequency magnetic fluctuations reveals that ICWs are indeed present along the current sheet, thus linking the magnetic topology of the remotely imaged coronal source regions with the wave bursts observed in situ. The present results may allow improvement of state-of-the-art models based on the ion cyclotron mechanism, providing new insights into the processes involved in coronal heating.
- Open Access
- 1 August 2022
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 935 (2) , 112
Linking Small-scale Solar Wind Properties with Large-scale Coronal Source Regions through Joint Parker Solar Probe–Metis/Solar Orbiter Observations
The solar wind measured in situ by Parker Solar Probe in the very inner heliosphere is studied in combination with the remote-sensing observation of the coronal source region provided by the METIS coronagraph aboard Solar Orbiter. The coronal outflows observed near the ecliptic by Metis on 2021 January 17 at 16:30 UT, between 3.5 and 6.3 R ⊙ above the eastern solar limb, can be associated with the streams sampled by PSP at 0.11 and 0.26 au from the Sun, in two time intervals almost 5 days apart. The two plasma flows come from two distinct source regions, characterized by different magnetic field polarity and intensity at the coronal base. It follows that both the global and local properties of the two streams are different. Specifically, the solar wind emanating from the stronger magnetic field region has a lower bulk flux density, as expected, and is in a state of well-developed Alfvénic turbulence, with low intermittency. This is interpreted in terms of slab turbulence in the context of nearly incompressible magnetohydrodynamics. Conversely, the highly intermittent and poorly developed turbulent behavior of the solar wind from the weaker magnetic field region is presumably due to large magnetic deflections most likely attributed to the presence of switchbacks of interchange reconnection origin.
- 1 August 2022
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 935 (2) , 112
Open AccessLinking Small-scale Solar Wind Properties with Large-scale Coronal Source Regions through Joint Parker Solar Probe–Metis/Solar Orbiter Observations
The solar wind measured in situ by Parker Solar Probe in the very inner heliosphere is studied in combination with the remote-sensing observation of the coronal source region provided by the METIS coronagraph aboard Solar Orbiter. The coronal outflows observed near the ecliptic by Metis on 2021 January 17 at 16:30 UT, between 3.5 and 6.3 R ⊙ above the eastern solar limb, can be associated with the streams sampled by PSP at 0.11 and 0.26 au from the Sun, in two time intervals almost 5 days apart. The two plasma flows come from two distinct source regions, characterized by different magnetic field polarity and intensity at the coronal base. It follows that both the global and local properties of the two streams are different. Specifically, the solar wind emanating from the stronger magnetic field region has a lower bulk flux density, as expected, and is in a state of well-developed Alfvénic turbulence, with low intermittency. This is interpreted in terms of slab turbulence in the context of nearly incompressible magnetohydrodynamics. Conversely, the highly intermittent and poorly developed turbulent behavior of the solar wind from the weaker magnetic field region is presumably due to large magnetic deflections most likely attributed to the presence of switchbacks of interchange reconnection origin.
- 31 October 2019
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 491 (2) , 1673-1689
Development of a simulator of the SIMBIOSYS suite onboard the BepiColombo mission
BepiColombo is the fifth cornerstone mission of the European Space Agency (ESA) dedicated to study the Mercury planet. The BepiColombo spacecraft comprises two science modules: the Mercury Planetary Orbiter (MPO) realized by ESA and the Mercury Magnetospheric Orbiter provided by the Japan Aerospace Exploration Agency. The MPO is composed by 11 instruments, including the ‘Spectrometer and Imagers for MPO BepiColombo Integrated Observatory System’ (SIMBIOSYS). The SIMBIOSYS suite includes three optical channels: a Stereoscopic Imaging Channel, a High Resolution Imaging Channel, and a Visible and near Infrared Hyperspectral Imager. SIMBIOSYS will characterize the hermean surface in terms of surface morphology, volcanism, global tectonics, and chemical composition. The aim of this work is to describe a tool for the radiometric response prediction of the three SIMBIOSYS channels. Given the spectral properties of the surface, the instrument characteristics, and the geometrical conditions of the observation, the realized SIMBIOSYS simulator is capable of estimating the expected signal and integration times for the entire mission lifetime. In the simulator the spectral radiance entering the instrument optical apertures has been modelled using a Hapke reflectance model implementing the parameters expected for the hermean surface. The instrument performances are simulated by means of calibrated optical and detectors responses. The simulator employs the SPICE (Spacecraft, Planet, Instrument, C-matrix, Environment) toolkit software, which allows us to know for each epoch the exact position of the MPO with respect to the planet surface and the Sun.
- 31 October 2019
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 491 (2) , 1673-1689
Development of a simulator of the SIMBIOSYS suite onboard the BepiColombo mission
BepiColombo is the fifth cornerstone mission of the European Space Agency (ESA) dedicated to study the Mercury planet. The BepiColombo spacecraft comprises two science modules: the Mercury Planetary Orbiter (MPO) realized by ESA and the Mercury Magnetospheric Orbiter provided by the Japan Aerospace Exploration Agency. The MPO is composed by 11 instruments, including the ‘Spectrometer and Imagers for MPO BepiColombo Integrated Observatory System’ (SIMBIOSYS). The SIMBIOSYS suite includes three optical channels: a Stereoscopic Imaging Channel, a High Resolution Imaging Channel, and a Visible and near Infrared Hyperspectral Imager. SIMBIOSYS will characterize the hermean surface in terms of surface morphology, volcanism, global tectonics, and chemical composition. The aim of this work is to describe a tool for the radiometric response prediction of the three SIMBIOSYS channels. Given the spectral properties of the surface, the instrument characteristics, and the geometrical conditions of the observation, the realized SIMBIOSYS simulator is capable of estimating the expected signal and integration times for the entire mission lifetime. In the simulator the spectral radiance entering the instrument optical apertures has been modelled using a Hapke reflectance model implementing the parameters expected for the hermean surface. The instrument performances are simulated by means of calibrated optical and detectors responses. The simulator employs the SPICE (Spacecraft, Planet, Instrument, C-matrix, Environment) toolkit software, which allows us to know for each epoch the exact position of the MPO with respect to the planet surface and the Sun.
- 13 September 2019
- Published by Springer Nature in CEAS Space Journal
- Vol. 11 (4) , 485-496
Radiometric calibration of the SIMBIO-SYS STereo imaging Channel
- 13 September 2019
- Published by Springer Nature in CEAS Space Journal
- Vol. 11 (4) , 485-496
Radiometric calibration of the SIMBIO-SYS STereo imaging Channel
- 11 September 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11103, 111030U
Distortion calculation and removal for an off-axis and wide angle camera
For off-axis and wide angle systems, the calculation, calibration and removal of distortion effects from the images are often challenging tasks. Specific procedures have been implemented to assess and remove the distortion from the images acquired by the OSIRIS imaging instrument on-board the Rosetta ESA mission. OSIRIS consisted in a narrow and a wide angle camera. The Wide Angle Camera (WAC) is an off-axis, unobstructed and wide FoV (i.e. about 12°x12°) optical system. It has a peculiar optical configuration, and due to the off-axis design the camera presents a high level of intrinsic distortion, with the major component being anamorphism. The distortion has been estimated theoretically via raytracing during the design phase, then measured on-ground and inflight during the calibration campaigns. To obtain correct undistorted images, a distortion removal procedure has been implemented. The first step of the process has been to remove from the images the theoretical distortion. Then the distortion correction procedure has been refined using on-ground and in-flight calibration measurements. This work describes in detail the development of the procedure adopted to define, calculate and remove the distortion from the WAC images.
- 11 September 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11103, 111030U
Distortion calculation and removal for an off-axis and wide angle camera
For off-axis and wide angle systems, the calculation, calibration and removal of distortion effects from the images are often challenging tasks. Specific procedures have been implemented to assess and remove the distortion from the images acquired by the OSIRIS imaging instrument on-board the Rosetta ESA mission. OSIRIS consisted in a narrow and a wide angle camera. The Wide Angle Camera (WAC) is an off-axis, unobstructed and wide FoV (i.e. about 12°x12°) optical system. It has a peculiar optical configuration, and due to the off-axis design the camera presents a high level of intrinsic distortion, with the major component being anamorphism. The distortion has been estimated theoretically via raytracing during the design phase, then measured on-ground and inflight during the calibration campaigns. To obtain correct undistorted images, a distortion removal procedure has been implemented. The first step of the process has been to remove from the images the theoretical distortion. Then the distortion correction procedure has been refined using on-ground and in-flight calibration measurements. This work describes in detail the development of the procedure adopted to define, calculate and remove the distortion from the WAC images.
- 9 September 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11115, 38
Spectral response of the stereo imaging channel of SIMBIO-SYS on-board the ESA BepiColombo Mission
The STereoscopic imaging Channel (STC) is one of the three channels of SIMBIO-SYS instrument, whose goal is to study the Mercury surface in visible wavelength range. The SIMBIO-SYS instrument is on-board of ESA Bepicolombo spacecraft. STC is a double wide angle camera designed to map in 3D the whole Mercury surface. The detector of STC has been equipped with six filters: two panchromatic and four broad band. The panchromatic filters are centred at 700 nm with 200 nm of bandwidth, while the broad band ones have bandwidth of 20 nm and are centred at 420, 550, 750 and 920 nm, respectively. In order to verify the relative spectral response of each STC sub-channel, a spectral calibration has to be performed during the on-ground calibration campaign. The result consists in the transmissivity curve of each filter of STC as function of wavelength. The camera has been illuminated with a monochromator coupled with a diffuser and a collimator. The images have been acquired by changing the wavelength of the monochromator in the range correspondent to the filter bandwidth. The background images have been obtained by covering the light source and have been used to calculate and subtract the dark signal, fixed pattern noise (FPN) and ambient effects.
- 9 September 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11115, 38
Spectral response of the stereo imaging channel of SIMBIO-SYS on-board the ESA BepiColombo Mission
The STereoscopic imaging Channel (STC) is one of the three channels of SIMBIO-SYS instrument, whose goal is to study the Mercury surface in visible wavelength range. The SIMBIO-SYS instrument is on-board of ESA Bepicolombo spacecraft. STC is a double wide angle camera designed to map in 3D the whole Mercury surface. The detector of STC has been equipped with six filters: two panchromatic and four broad band. The panchromatic filters are centred at 700 nm with 200 nm of bandwidth, while the broad band ones have bandwidth of 20 nm and are centred at 420, 550, 750 and 920 nm, respectively. In order to verify the relative spectral response of each STC sub-channel, a spectral calibration has to be performed during the on-ground calibration campaign. The result consists in the transmissivity curve of each filter of STC as function of wavelength. The camera has been illuminated with a monochromator coupled with a diffuser and a collimator. The images have been acquired by changing the wavelength of the monochromator in the range correspondent to the filter bandwidth. The background images have been obtained by covering the light source and have been used to calculate and subtract the dark signal, fixed pattern noise (FPN) and ambient effects.
- Open Access
- 12 July 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11180, 145
SIMBIOSYS-STC ready for launch: a technical recap
BepiColombo is an Interdisciplinary Cornerstone Mission to the planet Mercury, realized as a collaboration between the European, ESA, and the Japanese, JAXA, space agencies. The mission, which owes its name to the space engineer and mathematician Giuseppe Colombo, is part of the Horizon 2000+ (Cosmic Vision) Program and will investigate the magnetosphere, internal structure, environment and surface of the planet.
- 12 July 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11180, 145
Open AccessSIMBIOSYS-STC ready for launch: a technical recap
BepiColombo is an Interdisciplinary Cornerstone Mission to the planet Mercury, realized as a collaboration between the European, ESA, and the Japanese, JAXA, space agencies. The mission, which owes its name to the space engineer and mathematician Giuseppe Colombo, is part of the Horizon 2000+ (Cosmic Vision) Program and will investigate the magnetosphere, internal structure, environment and surface of the planet.
- Open Access
- 12 July 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11180, 111807R
SIMBIO-SYS STC ready for the first light: the radiometric calibration
In order to reconstruct the geological history of Mercury, a detailed identification of the planet surface is needed. It includes the crustal differentiation and resurfacing, the volcanism, the tectonics and the surface/atmosphere interaction. To investigate these topics, good spatial resolution data are needed. A crucial role in the analysis of geological and mineralogical features of Mercury surface will be provided by the Spectrometer and Imagers for MPO BepiColombo-Integrated Observatory SYStem (SIMBIO-SYS) instrument suite [1].
- 12 July 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11180, 111807R
Open AccessSIMBIO-SYS STC ready for the first light: the radiometric calibration
In order to reconstruct the geological history of Mercury, a detailed identification of the planet surface is needed. It includes the crustal differentiation and resurfacing, the volcanism, the tectonics and the surface/atmosphere interaction. To investigate these topics, good spatial resolution data are needed. A crucial role in the analysis of geological and mineralogical features of Mercury surface will be provided by the Spectrometer and Imagers for MPO BepiColombo-Integrated Observatory SYStem (SIMBIO-SYS) instrument suite [1].
- 1 April 2019
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 90 (4) , 043106
SIMBIO-SYS/STC stereo camera calibration: Geometrical distortion
The STereo imaging Channel (STC) is the first push-frame stereo camera on board an European Space Agency (ESA) satellite, i.e., the ESA-Japan Aerospace eXploration Agency mission BepiColombo. It was launched in October 2018, and it will reach its target, Mercury, in 2025. The STC main aim is to provide the global three-dimensional reconstruction of the Mercury surface. STC, the stereo channel of spectrometer and imagers for Mercury Planetary Orbiter BepiColombo-Integrated Observatory System, is based on an original optical design that incorporates the advantages of a compact unique detector instrument and the convenience of a double direction acquisition system. In fact, STC operates in a push-frame imaging mode and its two optical sub-channels will converge the incoming light on a single focal plane assembly allowing to minimize mass and volume. The focal plane of the instrument is housing six different filters: two panchromatic filters in the range 600-800 nm and four broadband filters with central wavelengths in the range 420-920 nm. In this paper, the geometrical calibration of the instrument, including the optical setups used, will be described. The methods used to derive the focal lengths, the boresights, and the reference systems of the different filter models are presented, and the related distortion results are discussed. The STC off-axis configuration forced to develop a distortion map model based on the RFM (rational function model). In contrast to other existing models, which allow linear estimates, the RFM is not referred to specific lens geometry, but it is sufficiently general to model a variety of distortion types, as it will be demonstrated in this particular case.
- 1 April 2019
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 90 (4) , 043106
SIMBIO-SYS/STC stereo camera calibration: Geometrical distortion
The STereo imaging Channel (STC) is the first push-frame stereo camera on board an European Space Agency (ESA) satellite, i.e., the ESA-Japan Aerospace eXploration Agency mission BepiColombo. It was launched in October 2018, and it will reach its target, Mercury, in 2025. The STC main aim is to provide the global three-dimensional reconstruction of the Mercury surface. STC, the stereo channel of spectrometer and imagers for Mercury Planetary Orbiter BepiColombo-Integrated Observatory System, is based on an original optical design that incorporates the advantages of a compact unique detector instrument and the convenience of a double direction acquisition system. In fact, STC operates in a push-frame imaging mode and its two optical sub-channels will converge the incoming light on a single focal plane assembly allowing to minimize mass and volume. The focal plane of the instrument is housing six different filters: two panchromatic filters in the range 600-800 nm and four broadband filters with central wavelengths in the range 420-920 nm. In this paper, the geometrical calibration of the instrument, including the optical setups used, will be described. The methods used to derive the focal lengths, the boresights, and the reference systems of the different filter models are presented, and the related distortion results are discussed. The STC off-axis configuration forced to develop a distortion map model based on the RFM (rational function model). In contrast to other existing models, which allow linear estimates, the RFM is not referred to specific lens geometry, but it is sufficiently general to model a variety of distortion types, as it will be demonstrated in this particular case.