CLCuofu Lin

Cuofu Lin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cuofu Lin has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Asin Phase Demodulation for High-Resolution FMCW Interferometry

    by Xiyuan Sun, Kai Zhu, Yao Zhu, Yapeng Pei, Yonggui Yuan, Fanyang Dang, Yunlong Zhu, Xiaojun Zhang, Xiaojie Bao, Guohua Wei, et al.

    Frequency-modulated continuous-wave (FMCW) interferometry is a pivotal technique for high-resolution, non-contact distance measurement. However, enhancing its resolution typically requires a substantial laser tuning range, and a systematic framework linking signal quality to ultimate resolution remains underdeveloped. This paper introduces an Arcsine (Asin) phase demodulation method based on peak feature reconstruction to achieve high-resolution FMCW interferometry with a relatively compact tuning range. The proposed method reconstructs the phase via peak detection and an arcsine operation, significantly improving the accuracy of demodulation per unit tuning range. Experimental validation demonstrates that with a tuning range of only 26 GHz, our approach enables absolute distance measurement over 0–1 m with sub-micrometer resolution and an accuracy of 0.86 μm.

  • Accurate Prediction of Thermal Bias Drift of km-Level FOG Coil Using High-Performance OFDR

    by Xiang Zhang, Jun Yang, Cuofu Lin, Yicheng Lin, Tianle Zhang, Zheng Hua, Zhangjun Yu, Yuncai Wang, Yuwen Qin

    The degradation of optical symmetry caused by the thermal strain of the fiber coil results in the thermal bias drift of fiber optic gyro (FOG). This paper presents a method for quantitative analysis of the optical symmetry of the fiber coil and accurate prediction of thermal bias drift in FOG. Firstly, a thermal strain model is established to illustrate the strain characteristics of the layer structure in the fiber coil under temperature fields, emphasizing the importance of thermal strain on optical symmetry. Then, an equivalent asymmetric index (αTk) is introduced to quantitatively evaluate the optical symmetry of the fiber coil. By deriving equations for optical symmetry and thermal bias drift caused by thermal strain, a novel method is proposed to predict and optimize the thermal bias drift. This method utilizes high-performance OFDR to measure temperature and strain in a 3 km fiber coil to predict thermal bias drift. It also discusses the relationship between the length of the tail fiber and optical symmetry, predicting the precise length required to optimize thermal bias drift. Subsequently, the same fiber coil is placed in the FOG to verify the accuracy of the thermal bias drift prediction. Adjusting the length of the tail fiber reduces the thermal bias drift from 0.33°/h to 0.13°/h.


  • High Spatial Resolution Distributed Birefringence Measurement in Km Level Length PM Fiber Based on Polarization OFDR

    by Cuofu Lin, Dongcheng Xie, Jun Yang, Xiang Zhang, Chen Zou, Zhangjun Yu, Yuncai Wang, Yuwen Qin

    This paper proposes a distributed birefringence measurement method for long-distance polarization maintaining fiber (PMF) based on polarization optical frequency domain reflectometry (P-OFDR). Distinguished from the existing ways, the method characterizes birefringence by the internal strain of the PMF, and cuts off the dependence of birefringence measurements on the wavelength of the interrogated laser. It obtains the internal strain through the cross-correlation of the Rayleigh backscattering (RBS) spectra from the two orthogonal axes of polarization. The measured internal strain is converted to birefringence according to the parameters of the PMF. In addition, a delay correction method is proposed for overcome the degradation of the RBS spectra correlation due to birefringence delay, and extends the measurement distance. In the experiments, the distributed birefringence measurement in 5020m PMF is achieved with a spatial resolution of 10cm and a measurement accuracy of 1.4×10-7. The single sweep is faster at only 1 second and offers excellent stability. Finally, we demonstrate the application of the method in a fiber coil. The measured distributed birefringence of the coil is symmetric. Stress concentration due to temperature variations and winding defects is clearly visible in the results. The method is helpful for quality evaluation of polarization maintaining devices and PMF, as well as potentially applying to birefringence-based distributed sensing.


  • Distributed Chromatic Dispersion Compensation Method Based on Mismatch Factor for High Resolution OFDR

    by Chen Zou, Dongcheng Xie, Cuofu Lin, Zhangjun Yu, Yunlong Zhu, Yao Zhu, Fanyang Dang, Yonggui Yuan, Jun Yang, Yuncai Wang, et al.

    Optical frequency domain reflectometry (OFDR) can provide a powerful tool for fiber components and devices diagnosis and characterization. However, apart from laser source phase noise, the impact of the chromatic dispersion effect on the system is severely increased with the measurement length and laser tunable range. We propose a distributed chromatic dispersion compensation method for the device under the test (DUT) with complex structures containing different dispersive media connections in OFDR. Based on the mismatch factor (which is related to the difference in dispersion coefficient between the reference fiber and DUT), chromatic dispersion errors in the signal from different dispersion mediums can be compensated segment by segment by constructing the dispersion phase error signal. The compensation method is evaluated by experiments on DUT with multiple material dispersion (including reduced-cladding single-mode fiber (RC SMF) and dispersion compensation fiber (DCF)) and various measurement distances. Finally, we experimentally analyzed the internal reflection of a multifunctional integrated optical chip (MFIOC). Sweeping the laser source by 160 nm, the input coupling, output coupling, beam splitting, and defect points are individually revealed with a high resolution better than 15 $\mu$ m. We believe that this approach enables high-precision quantitative measurements as well as accurate identification and localization of fault diagnosis for optical fibers and devices.


  • Optical frequency domain polarimetry based on a self-referenced unbalanced Mach–Zehnder interferometer

    by Qinqin Zhuang, Yicheng Lin, Cuofu Lin, Zhangjun Yu, Yonggui Yuan, Jun Yang, Kun-Hua Wen, Pengbai Xu, Yuncai Wang, Yuwen Qin

    Optical frequency domain polarimetry (OFDP) is an emerging distributed polarization crosstalk rapid measurement method with an ultrawide dynamic range. However, interferometric phase noise induced by the laser source and ambient noise results in a trade-off between measurement length and dynamic range. In this Letter, we solve this problem with a self-referenced unbalanced Mach–Zehnder interferometer. The features of long distance (9.8 km), ultrawide dynamic range (107.8 dB), short measurement time (2 sec), and signal-to-noise ratio improvement against ambient noise are experimentally demonstrated. The method makes it possible to evaluate a long polarization-maintaining fiber in an environment whose state changes rapidly.


  • SNR Improvement of Optical Frequency Domain Polarimetry Against Laser Frequency Sweep Nonlinearity

    by Qinqin Zhuang, Cuofu Lin, Zhangjun Yu, Kunhua Wen, Pengbai Xu, Jun Yang, Yuncai Wang, Yuwen Qin

    A high-precision measurement of distributed polarization crosstalk (DPC) is necessary for developing the device with an ultrahigh polarization extinction ratio of even more than 80 dB. Optical frequency domain polarimetry (OFDP) is a novel DPC measurement method with a potential ultra-wide dynamic range. The degradation of dynamic range caused by interference phase error is a common issue in optical frequency domain measurement techniques. In this work, we enhanced the dynamic range by solving the phase error problem induced by the laser frequency sweep nonlinearity to improve the measurement precision of weak polarization crosstalk. The aliasing issue caused by the fluctuation of the frequency sweep rate is the primary reason for the limited dynamic range. We proposed a modified dynamic range limit model of OFDP considering the aliasing issue. The experimental results agree with the inflection points predicted by the modified dynamic range limit model. Under the guidance of the model, we achieved a dynamic range of more than 115 dB with different optical path differences of the interferometer and various sweep rates of the laser. Compared to the DPC measurement method with a dynamic range of 100 dB, the measurement repeatability is improved from 7.0 dB to <1.0 dB for polarization crosstalk less than -95 dB.


  • Noise Compensation Methods for Optical Fiber Frequency Sweeping Interferometry: A Review

    by Jun Yang, Chen Zou, Cuofu Lin, Yunlong Zhu, Yao Zhu, Fanyang Dang, Yonggui Yuan, Zhangjun Yu, Yuncai Wang, Yuwen Qin

    Noise induced by the fluctuation of laser phase, frequency, intensity, etc., can deteriorate the point spread function (PSF) in distributed optical fiber sensing and testing systems, which is the core concern for measurement performance, such as measurement spatial resolution, length range, accuracy and dynamic range. In this paper, we review the development of noise compensation methods for improving the PSF in optical fiber frequency sweeping interferometry (OFFSI) systems and provide a reference to select appropriate compensation methods in different applications (e.g., fiber optics component characterization, optical fiber network diagnosis). A discussion of noise impacts on PSF is made, including laser source phase noise, laser source intensity noise and ambient noise. The most serious noise is the laser source phase noise involved in frequency tunable lasers, including deterministic frequency tuning nonlinearity and stochastic laser phase noise. Also, a comprehensive and detailed classification of the compensation strategies for different noise is provided according to the dominant noise in the laser source. Recent progress on each kind of compensation method is analyzed based on the principles, performance, advantages and limitations, and a comparison of compensation methods is presented. Finally, an overview of trends and future developments is given.


  • Increased Spurious-Free Dynamic Range in Frequency Sweeping Interferometry by Suppression of Parasitic Amplitude Modulation

    by Cuofu Lin, Jun Yang, Zhangjun Yu, Chen Zou, Tieliang Mou, Yunlong Zhu, Fanyang Dang, Yonggui Yuan, Yuncai Wang, Yuwen Qin

    We propose an envelope detrending method to correct parasitic amplitude modulation (AM) in frequency sweeping interferometry (FSI). Parasitic AM arises from effects such as device spectral response and residual AM of laser. The periodic component in parasitic AM introduces spurious harmonics, which degrade the spurious-free dynamic range (SFDR) and interfere with information analysis. The proposed method employs a Hilbert transform to obtain a time-varying amplitude fluctuation curve from an auxiliary interferometer. This curve is then employed to detrend the parasitic AM in the main interferometric signal, thus restoring the point spread function and improving the SFDR. An optimal SFDR can be obtained when the optical path differences (OPDs) of the two interferometers are equal, while mismatched OPDs lead to a rapid degradation of the SFDR correction. Experimental results demonstrate the effectiveness of the proposed method and the optimal matching condition. A maximum SFDR of 90.2dB can be achieved when the OPD matching condition is satisfied. By applying the method to an optical frequency domain polarimeter, we realized a measured 81.1dB polarization extinction ratio. We believe that the proposed method can also help to improve the SFDR in other FSI systems.


  • Optical frequency domain polarimetry for distributed polarization crosstalk measurement beyond a 110 dB dynamic range

    by Zhangjun Yu, Qinqin Zhuang, Yuhao Lin, Yicheng Lin, Cuofu Lin, Bowei Rang, Yonggui Yuan, Jun Yang, Kunhua Wen, Pengbai Xu, et al.

    In this Letter, we present optical frequency domain polarimetry (OFDP), a novel, to the best of our knowledge, distributed polarization crosstalk (DPC) measurement method with a dynamic range beyond 110 dB. It is based on swept-wavelength interferometry using a tunable laser source (TLS) and a delay line interferometer (DLI). The ultrahigh dynamic range is achieved by optimizing the sweep rate of the TLS and the optical path difference of the DLI. Using OFDP, we measured polarization crosstalk below –105 dB in a LiNbO3 waveguide modulator for the first time. OFDP will play a significant role in developing and fabricating high-performance polarization devices.


  • Distributed Polarization Measurement for Fiber Sensing Coils: A Review

    by Zhangjun Yu, Jun Yang, Cuofu Lin, Xiang Zhang, Fanyang Dang, Yonggui Yuan, Libo Yuan, Yuncai Wang, Yuwen Qin

    Distributed polarization measurement is a significant way to evaluate polarization-maintaining fiber. It can assess the fiber's polarization preserving ability and locate internal defects and external perturbations of a long-distance PM fiber. Distributed polarization crosstalk of a fiber-optic polarization device accurately describes its time-dependent optical performance. Therefore, distributed polarization measurement technology can be used to predict and prevent the performance degradation and failure. However, the remaining shortcomings of existing measurement methods are low dynamic range, short measurement length, inadequate spatial resolution, and low diagnostic ability. This paper reviews recent advances in solving the above issues and presents ways to obtain high performances: a dynamic range $\gt 90 {\text {dB}}$ , a measurement length $\gt 10 {\text {km}}$ , a full range spatial resolution $\lt 10 {\text {cm}}$ , and developments in time domain, frequency domain, and time-frequency domain diagnosis methods. All these high-performance techniques have led to more effective diagnosis of fiber optic sensing coils. This can be demonstrated by a series of comparative measurements and analysis of three PM fiber optic sensing coils in various configurations such as a randomly-wound spool of fiber and a free-standing coil quadrupole-pattern-wound from it, a second coil with and without a flange at various temperatures, and a third coil spliced to a Y waveguide. Each is one of the key configurations during the production processes or the application of the fiber sensing coil. The technical progress reviewed here will greatly promote the development, production, and application of fiber sensing coils.