Haiyan Hu

The pore‐fracture structure of deep coal reservoirs is highly important for evaluating, exploring, and developing coalbed methane (CBM) resources. This study considers three coal samples from the DJ57 well in the Benxi Formation in the Daning–Jixian block on the eastern margin of the Ordos Basin as the research object. Based on the coal quality parameters of the coal samples, field emission scanning electron microscopy (FE‐SEM), gas adsorption experiments, high‐pressure mercury intrusion porosimetry (MIP), and microcomputed tomography (micro‐CT) scanning were used to quantitatively characterize the nanoscale pores and microscale fractures in deep coal reservoirs and to evaluate the pore‐fracture structure at different scales. The results reveal that the pore types in the Benxi Formation coal samples are diverse and include mainly organic matter (OM) pores, inorganic pores (intraparticle and interparticle pores), and microfractures. The organic pores are diverse in shape and mainly exhibit round, oval, and wedge shapes, while the microfractures exhibit slender stripes or serrated curves. The multiscale quantitative characterization of deep coal reservoir pores and fractures is based on a variety of pore characterization methods, and the pore and fracture volume distributions are mainly U‐shaped, revealing the coexistence of micropores and microfractures. The volumes of micropores (0.3–2 nm), mesopores (2–50 nm), macropores (50 nm to 10 μm), and microfractures (>10 μm) account for 78.00%, 6.78%, 2.08%, and 13.14%, respectively, of the total pore volume (PV). Based on a full‐scale pore‐fracture splicing calculation, the total permeability of the Benxi Formation coal samples ranges from 5.77 to 28.22 mD. The observation results indicate that the microfractures are connected to each other, forming a network structure with strong connectivity. The microfractures are mainly associated with pore diameters > 100 μm, accounting for approximately 95% of the total permeability. Moreover, micropores in deep coal reservoirs provide a large space for CBM adsorption, and microfractures enhance the seepage capacity of CBM.

In this study, the microscopic pore characteristics of shale in marine strata are evaluated. Based on field emission scanning electron microscopy (FE-SEM), low-temperature N₂ adsorption (LT-N₂GA), low-pressure CO₂ adsorption (LP-CO₂GA) and high-pressure methane adsorption (HPMA) experiments, the pore characteristics of 12 shales from the Wufeng–Longmaxi Formations in northern Yunnan and Guizhou are characterized qualitatively and quantitatively. Fractal Frenkel–Halsey–Hill (FHH) theory is used to analyse the fractal characteristics, and the adsorption pore characteristics of shale are discussed. The correlation between the fractal dimension and pore structure and adsorption performance is determined. The results show that the total organic carbon (TOC) contents of the 12 shales are in the middle–low level, ranging from 0.43% to 5.42%, and the shales are generally in the highly mature to overmaturity stage (vitrinite reflectance (R_o) values between 1.80% and 2.51%). The mineral composition is mainly quartz and clay minerals. The average clay mineral content is 40.98% (ranging from 24.7% to 63.3%), and the average quartz content is 29.03% (ranging from 16.8% to 39.6%), which are consistent with those of marine shale in the Sichuan Basin. FE-SEM and LT-N₂GA isotherms reveal a complex shale pore structure and open pore style, mainly ink bottle-shaped and parallel plate-like pores. The total pore volumes (PVs) range from 0.012–0.052 cm³/g, and the specific surface area (SSA) values range from 18.112–38.466 m²/g. All shale samples have abundant micropores and mesopores, accounting for >90% of the total SSA. The fractal dimensions, D1 and D2, were obtained from N₂ adsorption data, with different adsorption characteristics at 0–0.5 and 0.5–1.0 relative pressures. The fractal dimensions increase with increasing BJH PV and BET SSA and decrease with decreasing average pore diameter (APD). The fractal dimensions are positively correlated with the TOC and clay mineral contents and negatively correlated with the quartz content. The fractal dimension can be used to evaluate the methane adsorption capacity; the larger the fractal dimension is, the larger the methane adsorption capacity is. Fractal analysis is helpful to better understand the pore structure and adsorption capacity of shale gas reservoirs.

The pore structure is an important factor in determining the storage capacity for shale gas development. Twelve samples were selected from the marine to continental transitional shales in the Shanxi Formations on the eastern margin of the Ordos Basin, and their nanoscale pore structure was investigated by a variety of low-temperature N₂ adsorption (LT-N₂GA) and low-pressure CO₂ adsorption (LP-CO₂GA) and high-pressure mercury intrusion (HPMI) experiments. The shale pores are complex and are mainly mesopores, which range mainly from 10nm to 40nm and greatly contribute to the pore volume (PV), whereas pores with a diameter less than 0.8nm greatly contribute to the specific surface area (SSA) of the shale. The pore structure is affected by the TOC content, organic matter maturity, and illite/smectite (I/S) mixed layer content. The total PV increases with the increase in TOC content, organic matter maturity, and I/S mixed layer content. The effects of pores on the occurrence shale gas were determined by high-pressure methane adsorption experiments. The maximum adsorption amount of methane was positively correlated with the SSA of the micropores, indicating that the micropores have a large SSA, which controlled the adsorbed gas content of the shale. The mesopores provide the majority of the PV, which mainly corresponds to the volume of free gas in the shale, and the macropores are mainly micron-sized pores, which can form the main migration channels for shale gas.