Ivan Babichev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ivan Babichev has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Larysa Volianska
National University “Kyiv Aviation Institute
5 shared publications - Mykola Kulyk
University of Aviation and Information Technologies
5 shared publications - Fedir Kirchu
STI Dynamics UG (limited liability company)
4 shared publications - Olesia Yashchuk
National University “Kyiv Aviation Institute
2 shared publications - Andrii Voznyuk
National aviation university, Ukraine
1 shared publication - Ivan Lastivka
National University "Kyiv Aviation Institute
1 shared publication
Latest Publications
- Open Access
- 3 September 2026
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4sup1,p. 70-76
ЕКСПЕРИМЕНТАЛЬНЕ ДОСЛІДЖЕННЯ ХАРАКТЕРИСТИК ВЕНТИЛЯТОРІВ МАЛОРОЗМІРНИХ БПЛА
The subject of this study is the determination of the performance characteristics of small UAV fans across a wide range of rotor speeds. The objective of this work is to improve the accuracy of flow-parameter measurements in the inter-blade passage of a tandem fan with a combined toroidal-spiral blade tip by digital modeling and verification of the results on a specially designed experimental test bench. The task: to propose an experimental test bench for studying the power characteristics of UAV thrust fans of both enclosed and open types. The problem of selecting a fan for a power plant is quite complex, given the wide range of aircraft for various purposes, especially small-sized ones. Sometimes it is necessary to choose from a wide range of model fans that can be produced quite quickly using a 3D printer. Therefore, the development of an experimental setup that, while featuring simple design solutions, would meet the necessary operational requirements and specified metrological characteristics is undoubtedly a pressing task. The following results were obtained. The experimental test bench proposed (and tested) by the authors is technologically simple and enables rapid determination of comparative and operational characteristics of fans in the relevant model range, with the aim of selecting the optimal option from the customer’s perspective. A method for determining the main energy-efficiency characteristics of fans for small UAVs is presented (the experiments were conducted primarily on tandem fans; in which both rows of blades are connected by a toroidal-spiral tip). A distinctive feature of the method and the developed experimental setup is that it allows for the separation of the thrust and torque measurement channels, which ensured their independent measurement. This made it possible to obtain scientifically sound simulation results through practical verification. During the design of the setup, particular attention was paid to the channels for recording efficiency and power factor, as these parameters were measured indirectly—their values were calculated from other measured parameters rather than determined directly. It should be noted that the experimental test bench was designed to allow for the study of both open and enclosed fans. Another distinctive feature of the setup is that it allows one to obtain fan performance characteristics, such as the thrust dependence T=f(n), power – P=f(n), and efficiency η=f(n) over a wide range of rotor rotational speeds (n=0…50,000 rpm), which is very important for small UAVs. The results obtained were used to derive comparative characteristics of a model series of fans for a UAV engine with a thrust of 50 kH, which are currently the most prevalent, especially in combat conditions. Further expansion of the system’s functional capabilities is planned. Therefore, during its design, reserve channels for measuring parametric information were incorporated.
- 3 September 2026
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4sup1,p. 70-76
Open AccessЕКСПЕРИМЕНТАЛЬНЕ ДОСЛІДЖЕННЯ ХАРАКТЕРИСТИК ВЕНТИЛЯТОРІВ МАЛОРОЗМІРНИХ БПЛА
The subject of this study is the determination of the performance characteristics of small UAV fans across a wide range of rotor speeds. The objective of this work is to improve the accuracy of flow-parameter measurements in the inter-blade passage of a tandem fan with a combined toroidal-spiral blade tip by digital modeling and verification of the results on a specially designed experimental test bench. The task: to propose an experimental test bench for studying the power characteristics of UAV thrust fans of both enclosed and open types. The problem of selecting a fan for a power plant is quite complex, given the wide range of aircraft for various purposes, especially small-sized ones. Sometimes it is necessary to choose from a wide range of model fans that can be produced quite quickly using a 3D printer. Therefore, the development of an experimental setup that, while featuring simple design solutions, would meet the necessary operational requirements and specified metrological characteristics is undoubtedly a pressing task. The following results were obtained. The experimental test bench proposed (and tested) by the authors is technologically simple and enables rapid determination of comparative and operational characteristics of fans in the relevant model range, with the aim of selecting the optimal option from the customer’s perspective. A method for determining the main energy-efficiency characteristics of fans for small UAVs is presented (the experiments were conducted primarily on tandem fans; in which both rows of blades are connected by a toroidal-spiral tip). A distinctive feature of the method and the developed experimental setup is that it allows for the separation of the thrust and torque measurement channels, which ensured their independent measurement. This made it possible to obtain scientifically sound simulation results through practical verification. During the design of the setup, particular attention was paid to the channels for recording efficiency and power factor, as these parameters were measured indirectly—their values were calculated from other measured parameters rather than determined directly. It should be noted that the experimental test bench was designed to allow for the study of both open and enclosed fans. Another distinctive feature of the setup is that it allows one to obtain fan performance characteristics, such as the thrust dependence T=f(n), power – P=f(n), and efficiency η=f(n) over a wide range of rotor rotational speeds (n=0…50,000 rpm), which is very important for small UAVs. The results obtained were used to derive comparative characteristics of a model series of fans for a UAV engine with a thrust of 50 kH, which are currently the most prevalent, especially in combat conditions. Further expansion of the system’s functional capabilities is planned. Therefore, during its design, reserve channels for measuring parametric information were incorporated.
- 3 September 2026
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4sup1,p. 70-76
ЕКСПЕРИМЕНТАЛЬНЕ ДОСЛІДЖЕННЯ ХАРАКТЕРИСТИК ВЕНТИЛЯТОРІВ МАЛОРОЗМІРНИХ БПЛА
The subject of this study is the determination of the performance characteristics of small UAV fans across a wide range of rotor speeds. The objective of this work is to improve the accuracy of flow-parameter measurements in the inter-blade passage of a tandem fan with a combined toroidal-spiral blade tip by digital modeling and verification of the results on a specially designed experimental test bench. The task: to propose an experimental test bench for studying the power characteristics of UAV thrust fans of both enclosed and open types. The problem of selecting a fan for a power plant is quite complex, given the wide range of aircraft for various purposes, especially small-sized ones. Sometimes it is necessary to choose from a wide range of model fans that can be produced quite quickly using a 3D printer. Therefore, the development of an experimental setup that, while featuring simple design solutions, would meet the necessary operational requirements and specified metrological characteristics is undoubtedly a pressing task. The following results were obtained. The experimental test bench proposed (and tested) by the authors is technologically simple and enables rapid determination of comparative and operational characteristics of fans in the relevant model range, with the aim of selecting the optimal option from the customer’s perspective. A method for determining the main energy-efficiency characteristics of fans for small UAVs is presented (the experiments were conducted primarily on tandem fans; in which both rows of blades are connected by a toroidal-spiral tip). A distinctive feature of the method and the developed experimental setup is that it allows for the separation of the thrust and torque measurement channels, which ensured their independent measurement. This made it possible to obtain scientifically sound simulation results through practical verification. During the design of the setup, particular attention was paid to the channels for recording efficiency and power factor, as these parameters were measured indirectly—their values were calculated from other measured parameters rather than determined directly. It should be noted that the experimental test bench was designed to allow for the study of both open and enclosed fans. Another distinctive feature of the setup is that it allows one to obtain fan performance characteristics, such as the thrust dependence T=f(n), power – P=f(n), and efficiency η=f(n) over a wide range of rotor rotational speeds (n=0…50,000 rpm), which is very important for small UAVs. The results obtained were used to derive comparative characteristics of a model series of fans for a UAV engine with a thrust of 50 kH, which are currently the most prevalent, especially in combat conditions. Further expansion of the system’s functional capabilities is planned. Therefore, during its design, reserve channels for measuring parametric information were incorporated.
- 3 September 2026
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4sup1,p. 70-76
ЕКСПЕРИМЕНТАЛЬНЕ ДОСЛІДЖЕННЯ ХАРАКТЕРИСТИК ВЕНТИЛЯТОРІВ МАЛОРОЗМІРНИХ БПЛА
The subject of this study is the determination of the performance characteristics of small UAV fans across a wide range of rotor speeds. The objective of this work is to improve the accuracy of flow-parameter measurements in the inter-blade passage of a tandem fan with a combined toroidal-spiral blade tip by digital modeling and verification of the results on a specially designed experimental test bench. The task: to propose an experimental test bench for studying the power characteristics of UAV thrust fans of both enclosed and open types. The problem of selecting a fan for a power plant is quite complex, given the wide range of aircraft for various purposes, especially small-sized ones. Sometimes it is necessary to choose from a wide range of model fans that can be produced quite quickly using a 3D printer. Therefore, the development of an experimental setup that, while featuring simple design solutions, would meet the necessary operational requirements and specified metrological characteristics is undoubtedly a pressing task. The following results were obtained. The experimental test bench proposed (and tested) by the authors is technologically simple and enables rapid determination of comparative and operational characteristics of fans in the relevant model range, with the aim of selecting the optimal option from the customer’s perspective. A method for determining the main energy-efficiency characteristics of fans for small UAVs is presented (the experiments were conducted primarily on tandem fans; in which both rows of blades are connected by a toroidal-spiral tip). A distinctive feature of the method and the developed experimental setup is that it allows for the separation of the thrust and torque measurement channels, which ensured their independent measurement. This made it possible to obtain scientifically sound simulation results through practical verification. During the design of the setup, particular attention was paid to the channels for recording efficiency and power factor, as these parameters were measured indirectly—their values were calculated from other measured parameters rather than determined directly. It should be noted that the experimental test bench was designed to allow for the study of both open and enclosed fans. Another distinctive feature of the setup is that it allows one to obtain fan performance characteristics, such as the thrust dependence T=f(n), power – P=f(n), and efficiency η=f(n) over a wide range of rotor rotational speeds (n=0…50,000 rpm), which is very important for small UAVs. The results obtained were used to derive comparative characteristics of a model series of fans for a UAV engine with a thrust of 50 kH, which are currently the most prevalent, especially in combat conditions. Further expansion of the system’s functional capabilities is planned. Therefore, during its design, reserve channels for measuring parametric information were incorporated.
- Open Access
- 27 August 2025
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4sup1,p. 72-76
Ефективність тандемних тягових вентиляторів БПЛА з тороїдально-спіральною об’єднуючою закінцівкою лопатей
Unmanned Aerial Vehicles (UAVs) are increasingly in demand for both civilian and military missions. This has become especially evident during combat operations against the Russian Federation’s occupying forces, where battlefield advantages have been achieved precisely through the use of UAVs in many cases. However, UAVs have a major drawback that hinders their widespread use: a high noise level generated by propulsion fans. Attempts to reduce fan noise structurally often decrease fan performance. The greatest source of noise is the vortex shedding at the blade tips, the strength of which, in turn, depends on the blade diameter, as vortex noise (acoustic power level, APL) is proportional to the sixth power of the cross-sectional velocity of the blade. Thus, by reducing the blade diameter and increasing the number of blades, the acoustic power level can be significantly reduced. However, reducing the diameter also decreases the fan performance. Recently, interest in the design of toroidal fans has grown. The toroidal shape helps minimize tip vortices by restricting the flow and controlling edge leakage. However, due to the nonlinear relationship between blade pitch angle and performance, setting the blade pitch in toroidal fans is a very complex process. Furthermore, the manufacturability of such designs remains a significant challenge. Therefore, the authors set themselves the goal of combining the advantages of the classical fan design with those of the toroidal configuration into a single structure and evaluating the results without sacrificing performance. A tandem fan configuration with a toroidal-spiral integrated blade tip was proposed to achieve a sharp reduction in diameter (while maintaining nearly the same performance). A comparative analysis of two configurations (the toroidal and the classical tandem fan) with a toroidal-spiral integrated blade tip was conducted using a specially designed test bench based on normalized efficiency, power, and thrust coefficients. In addition, the acoustic power level (APL) of the vortex noise was assessed. A comparison between a five-bladed tandem fan with a toroidal-spiral integrated tip and a five-bladed toroidal fan showed that the acoustic power level remained nearly identical (with the same fan diameter and rotational speed) despite significantly higher performance.
- 27 August 2025
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4sup1,p. 72-76
Open AccessЕфективність тандемних тягових вентиляторів БПЛА з тороїдально-спіральною об’єднуючою закінцівкою лопатей
Unmanned Aerial Vehicles (UAVs) are increasingly in demand for both civilian and military missions. This has become especially evident during combat operations against the Russian Federation’s occupying forces, where battlefield advantages have been achieved precisely through the use of UAVs in many cases. However, UAVs have a major drawback that hinders their widespread use: a high noise level generated by propulsion fans. Attempts to reduce fan noise structurally often decrease fan performance. The greatest source of noise is the vortex shedding at the blade tips, the strength of which, in turn, depends on the blade diameter, as vortex noise (acoustic power level, APL) is proportional to the sixth power of the cross-sectional velocity of the blade. Thus, by reducing the blade diameter and increasing the number of blades, the acoustic power level can be significantly reduced. However, reducing the diameter also decreases the fan performance. Recently, interest in the design of toroidal fans has grown. The toroidal shape helps minimize tip vortices by restricting the flow and controlling edge leakage. However, due to the nonlinear relationship between blade pitch angle and performance, setting the blade pitch in toroidal fans is a very complex process. Furthermore, the manufacturability of such designs remains a significant challenge. Therefore, the authors set themselves the goal of combining the advantages of the classical fan design with those of the toroidal configuration into a single structure and evaluating the results without sacrificing performance. A tandem fan configuration with a toroidal-spiral integrated blade tip was proposed to achieve a sharp reduction in diameter (while maintaining nearly the same performance). A comparative analysis of two configurations (the toroidal and the classical tandem fan) with a toroidal-spiral integrated blade tip was conducted using a specially designed test bench based on normalized efficiency, power, and thrust coefficients. In addition, the acoustic power level (APL) of the vortex noise was assessed. A comparison between a five-bladed tandem fan with a toroidal-spiral integrated tip and a five-bladed toroidal fan showed that the acoustic power level remained nearly identical (with the same fan diameter and rotational speed) despite significantly higher performance.
- Open Access
- 27 August 2025
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4,p. 23-28
Особливості роботи тандемного вентилятора з об’єднуючою тороїдально-спіральною закінцівкою лопатей в обмеженому просторі
The operation of a thrust fan in a confined space is becoming an increasingly urgent problem due to the miniaturization of aircraft and, as a result, the expansion of their functionality. However, the traditional problems for small UAVs immediately arise: acoustic noise, low thrust, and, as a result, low payload. And the influence of the ground, walls, and ceiling creates an additional problem: low stability and controllability when approaching an obstacle. Another problem is the aerodynamic characteristics of the blades, especially the sleeve losses and end flows. That is, when approaching an obstacle, the pressure and shape of the inlet and outlet flows undergo significant changes and affect the basic characteristics of the aircraft. The deterioration of the aerodynamic characteristics of the blades contributes to an increase in noise, dust suction when operating in the ground impact zone, overturning of the aircraft when approaching the wall due to an increase in lateral force, etc. This significantly limits the functional capabilities of a small UAV. Exactly those for which they were created. When taking measures aimed at improving the tactical and technical characteristics of small UAVs, it is necessary to take into account their cost, based on the mass of their use. All these problems can be solved in two ways - by using toroidal fans, the manufacturing technology of which is a rather complicated problem, or by using traditional blades with a unifying toroidal-helical tip. The latter option looks the most attractive from the point of view of utilizing the previously achieved results. In addition, the interaction of the fan with the wall and ceiling at the same time is of undoubted interest. These problems are practically not considered by most researchers, although the problems of controllability and stability of small UAVs in these conditions are quite significant. And if for traditional fans with classical blade aerodynamics the issues of fan interaction with the wall, ground, and ceiling are considered quite extensively, then for toroidal fans, especially for tandem or tandem with a toroidal-helical tip, there are practically no such works. Of particular interest is the operation of an open rotor in a quadrotor system, when at high rotor speeds with tandem blades, the toroidal-helical unifying blade tip practically plays the role of a kind of channel (the effect of a ducted fan).
- 27 August 2025
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4,p. 23-28
Open AccessОсобливості роботи тандемного вентилятора з об’єднуючою тороїдально-спіральною закінцівкою лопатей в обмеженому просторі
The operation of a thrust fan in a confined space is becoming an increasingly urgent problem due to the miniaturization of aircraft and, as a result, the expansion of their functionality. However, the traditional problems for small UAVs immediately arise: acoustic noise, low thrust, and, as a result, low payload. And the influence of the ground, walls, and ceiling creates an additional problem: low stability and controllability when approaching an obstacle. Another problem is the aerodynamic characteristics of the blades, especially the sleeve losses and end flows. That is, when approaching an obstacle, the pressure and shape of the inlet and outlet flows undergo significant changes and affect the basic characteristics of the aircraft. The deterioration of the aerodynamic characteristics of the blades contributes to an increase in noise, dust suction when operating in the ground impact zone, overturning of the aircraft when approaching the wall due to an increase in lateral force, etc. This significantly limits the functional capabilities of a small UAV. Exactly those for which they were created. When taking measures aimed at improving the tactical and technical characteristics of small UAVs, it is necessary to take into account their cost, based on the mass of their use. All these problems can be solved in two ways - by using toroidal fans, the manufacturing technology of which is a rather complicated problem, or by using traditional blades with a unifying toroidal-helical tip. The latter option looks the most attractive from the point of view of utilizing the previously achieved results. In addition, the interaction of the fan with the wall and ceiling at the same time is of undoubted interest. These problems are practically not considered by most researchers, although the problems of controllability and stability of small UAVs in these conditions are quite significant. And if for traditional fans with classical blade aerodynamics the issues of fan interaction with the wall, ground, and ceiling are considered quite extensively, then for toroidal fans, especially for tandem or tandem with a toroidal-helical tip, there are practically no such works. Of particular interest is the operation of an open rotor in a quadrotor system, when at high rotor speeds with tandem blades, the toroidal-helical unifying blade tip practically plays the role of a kind of channel (the effect of a ducted fan).
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 16, e2824
Mathematical Modeling of Operating Process Parameters of a Mixed-flow Turbofan Engine with an Afterburner
The article provides a brief analytical review of mathematical models of the working process used to study the parameters and characteristics of a gas turbine engine at all stages of its creation and operation. It is shown that the first-level mathematical model can be used for the estimation of parameters and characteristics under real operating conditions that differ significantly from the calculated ones. A mathematical model of a mixed-flow turbofan engine with an afterburner is proposed in the article; the construction principle and structure of the mathematical model of the engine are given. The model allows solving various problems associated with calculating the performance of a mixed-flow turbofan engine with an afterburner in a wide range of external conditions and engine operating modes.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 16, e2824
Open AccessMathematical Modeling of Operating Process Parameters of a Mixed-flow Turbofan Engine with an Afterburner
The article provides a brief analytical review of mathematical models of the working process used to study the parameters and characteristics of a gas turbine engine at all stages of its creation and operation. It is shown that the first-level mathematical model can be used for the estimation of parameters and characteristics under real operating conditions that differ significantly from the calculated ones. A mathematical model of a mixed-flow turbofan engine with an afterburner is proposed in the article; the construction principle and structure of the mathematical model of the engine are given. The model allows solving various problems associated with calculating the performance of a mixed-flow turbofan engine with an afterburner in a wide range of external conditions and engine operating modes.
- 22 August 2022
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4sup2,p. 42-48
Особливості розрахунку та моделювання обтікання несучих та тягових гвинтів літальних апаратів в умовах сильно розрідженої атмосфери
This article presents the structure of designing and modeling the flow of rotors and pusher propellers in a highly rarefied atmosphere. The aerodynamic characteristics of an airfoil are key factors in determining design accuracy and performance prediction. The blade elements operate at different Reynolds numbers and angles of attack. The blade profile was selected based on an estimate of the lift-to-drag ratio for expected Reynolds numbers under the design conditions. This paper considers the features of the operation of propellers in a highly rarefied atmosphere. When modeling propellers operate in rarefied atmosphere, it is necessary to pay special attention to the choice of a model for the turbulent viscosity of the medium. The greatest difficulties in the design of stratospheric propellers arise when solving the problems of excessive diameter, weight and shape of the blades. To solve this problem, in this paper, it is proposed to use joined double row blades. This approach made it possible to eliminate the aerodynamic shading of the blades and increase their aerodynamic load. The use of double-row blades will provide the necessary rigidity and strength of the blades and will lead to weight reduction. Additionally, due to the double-row design, it becomes possible to reduce the diametrical dimensions of the propeller. An analytical technique for profiling double-row blades has been developed. The proposed approach is based on the joint application of the one-dimensional propeller theory and numerical gas dynamics methods. The one-dimensional theory is used to obtain the original geometric shape of the propeller for given characteristics, and the methods of numerical gas dynamics, which are based on solving the Reynold averages of the Navier-Stokes equations, are used to solve the problems of spatial modeling of the flow and obtain refined propeller characteristics. Considering the design requirements and operational limitations, it is proposed to use propellers with joined double-row blades in conditions of rarefied atmosphere.
- 22 August 2022
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 4sup2,p. 42-48
Особливості розрахунку та моделювання обтікання несучих та тягових гвинтів літальних апаратів в умовах сильно розрідженої атмосфери
This article presents the structure of designing and modeling the flow of rotors and pusher propellers in a highly rarefied atmosphere. The aerodynamic characteristics of an airfoil are key factors in determining design accuracy and performance prediction. The blade elements operate at different Reynolds numbers and angles of attack. The blade profile was selected based on an estimate of the lift-to-drag ratio for expected Reynolds numbers under the design conditions. This paper considers the features of the operation of propellers in a highly rarefied atmosphere. When modeling propellers operate in rarefied atmosphere, it is necessary to pay special attention to the choice of a model for the turbulent viscosity of the medium. The greatest difficulties in the design of stratospheric propellers arise when solving the problems of excessive diameter, weight and shape of the blades. To solve this problem, in this paper, it is proposed to use joined double row blades. This approach made it possible to eliminate the aerodynamic shading of the blades and increase their aerodynamic load. The use of double-row blades will provide the necessary rigidity and strength of the blades and will lead to weight reduction. Additionally, due to the double-row design, it becomes possible to reduce the diametrical dimensions of the propeller. An analytical technique for profiling double-row blades has been developed. The proposed approach is based on the joint application of the one-dimensional propeller theory and numerical gas dynamics methods. The one-dimensional theory is used to obtain the original geometric shape of the propeller for given characteristics, and the methods of numerical gas dynamics, which are based on solving the Reynold averages of the Navier-Stokes equations, are used to solve the problems of spatial modeling of the flow and obtain refined propeller characteristics. Considering the design requirements and operational limitations, it is proposed to use propellers with joined double-row blades in conditions of rarefied atmosphere.