Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hao Wang has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Distributed acoustic streaming enables versatile morphing and precision force generation for underwater soft robots

    by Kaifu Sun, Qian Zhang, Shubo Zhang, Yuhang Guan, Guorui Li, Hao Wang

    Underwater soft robots are promising for safely and adaptively interaction with delicate marine life and fragile objects. However, achieving configurable flexible morphing with high repeatability and precise adjustment remains challenging, particularly when manipulating targets with low stiffness such as jellyfish. In this paper, an underwater soft actuation strategy is developed by integrating piezoelectric transducer array onto flexible substrate to achieve distributed deformation and precise force generation. A theoretical model describing the in-plane bending behavior of strip actuators is developed and validated using experimental results. The proposed actuators exhibit high precision, performing an RMS shape error of 3.3% and a repeatability error of 0.48% of the strip length. Moreover, the actuation method provides a sub-millinewton force resolution and rapid response, which is illustrated by grasping jellyfish with minor deformation. A flexible platform including dual channel has been further developed for simultaneous grasping and transportation. The stable hovering has been performed while grasping the target, with positional standard deviations of 0.04 mm and 0.35 mm in x and y directions, respectively. This study offers new insights into the design of precise and multi-modal underwater soft robotic systems for delicate manipulation and marine observation.

  • Distributed acoustic sensing-based damage detection for offshore jacket structures using deep learning

    by Hao Wang, Huitao Feng, Shaopeng Liu, Qin Liu, Yuhao Cen, Zhan Lian, Chunying Xu

  • DeepTrack: A Pressure‐Tolerant Electromagnetically Driven Soft Robotic Fish Platform With Visually Guided Locomotion

    by Hao Wang, Yongzai Chen, Shaopeng Liu, Huitao Feng, Qin Liu, Zhenxiang Sun, Yinuo Li, Chenzhe Zhang, Lianshuang Hou, Xiaodong Liu, et al.

    Traditional rigid submersibles often lack the acoustic stealth and agility required for close‐range deep‐sea exploration. While soft robotics have emerged as a promising approach for navigating complex marine environments, these systems typically face a trade‐off between pressure tolerance and practical maneuverability. We present DeepTrack, an untethered soft robotic fish driven by a compact electromagnetic propulsion system. Integrating a pressure‐independent actuation mechanism into a compliant silicone body keeps the robot's mass at just 475 g and eliminates the need for bulky pressure vessels. A two‐fin configuration decouples forward propulsion from depth regulation, enabling agile 3D maneuvering. An onboard visual servoing system ensures precise closed‐loop target tracking. Experimental validations demonstrated a maximum swimming speed of 5.78 cm/s (0.27 body length (BL)) and a yaw rate of 0.26 rad/s. During dynamic trajectory tracking, the system maintained a root mean square error (RMSE) below 0.37 BL. Open‐water field trials further validated the robot's robustness in autonomously tracking dynamic targets amid ambient currents and unstructured visual clutter. Furthermore, hyperbaric chamber tests confirm that the robot preserves its structural integrity and tracking performance at hydrostatic pressures up to 30 MPa. These results demonstrate the potential of DeepTrack as a mechatronic platform for future visually guided operations in deep sea environments.

  • Open Access

    Numerical and Experimental Investigation of Mixing Enhancement in a Zigzag Passive Micromixer with D-Shaped Obstacles

    by Bingyang Yuan, Shuai Yuan, Hao Wang

    Micromixers are crucial for rapid and homogeneous mixing in lab-on-a-chip systems. This study presents a novel passive micromixer that synergistically combines a Zigzag channel with D-shaped obstacles to enhance mixing across a broad Reynolds number (Re) range of 0.1–50. The design leverages flow splitting, recombination, and the generation of localized high-velocity streams to effectively disrupt laminar flow. A comprehensive parametric study optimized key geometric parameters, including obstacle dimensions (b2, a2) and the number of mixing units (n). Results show that optimizing b2 to 500 μm and increasing a2 to 250 μm significantly enhances mixing efficiency. Mechanistic analysis reveals that centrifugal forces in the Zigzag channel work synergistically with obstacle-induced perturbations to stretch and fold the fluid interface, promoting transverse transport. The optimized mixer, fabricated and experimentally validated, achieves a high mixing index (>0.85) under all Re conditions. This work provides valuable design insights for developing efficient, compact micromixers for micro-total analysis systems.


  • Top Cited Papers

    Plasticized electrohydraulic robot autopilots in the deep sea

    by Guorui Li, Peng Shen, Tuck-Whye Wong, Mingyu Liu, Zhenxiang Sun, Xinyu Liu, Yongzai Chen, Xianghan Wang, Hao Zhang, Bingxu Hu, et al.

    Soft robots, with their compliant bodies, minimal environmental disturbance, and ability to withstand ambient pressures, offer promising solutions for deep-sea exploration. However, a common challenge of stiffening in soft materials impairs their effective actuation in harsh conditions. In this work, we integrated a liquid dielectric plasticizer within an electrohydraulic soft robot, serving dual critical functions as a softening agent to maintain the softness of the polymer shell and an electrohydraulic fluid for efficient actuation. In addition, by using the surrounding seawater as alternating electrodes, we prevented charge retention in dielectric layers, enabling sustained actuation performance. Field tests at depths of ~1360, 3176, and ~4071 meters confirmed the robot’s ability to sense the environment, navigate complex trajectories, and withstand unsteady disturbances. Our work offers a generalized and straightforward framework for developing soft materials tailored for deep-sea applications, paving the way for soft robots to execute real-world missions.


  • Open Access

    Research on the Reciprocating Friction and Installation Force of Seals in Deep-Sea Samplers

    by Hao Zhang, Yongjun Wang, Jiawang Chen, Yanjie Sun, Yongchun Shen, Hao Wang

    It is crucial to accurately characterize the static and dynamic properties of seals for the design of deep-sea equipment. This study investigated the movement resistance of O-rings under high pressure (up to 30 MPa) and low temperature (2 °C). Numerical simulation models were set up to investigate the effects of material properties and seal structure dimensions on the reciprocating friction and installation force of O-rings. Furthermore, a novel resistance testing rig was developed to facilitate the measurement of reciprocating friction and installation force of O-rings under high pressure and low temperature. The results of this study indicate that nitrile rubber (NBR) has a reduced sensitivity to temperature variations, and the hardening of the material due to the low temperatures encountered in deep-sea environments does not substantially increase its movement resistance. Conversely, fluororubber (FKM) exhibits superior static sealing reliability. We optimized the sealing structure of the pressure-maintaining trapping instrument (PMTI) and successfully conducted field tests at the South China Sea. The results of this study may serve as a valuable reference for the sealing design of deep-sea equipment.


  • Research on the Isobaric Transfer Method and Device for Sediment of Full-Ocean Depth

    by Qixiao Zhou, Hao Wang, Peihao Zhang, Qiaoling Gao, Haonan Li, Jiawang Chen

    In this study, a sediment isobaric transfer device based on the principle of volume displacement was built, and the work process of the device was explained. A physical model was built in hydraulic analysis software AMESim to simulate the actual working conditions. The influences of pre-charge pressure and volume of accumulator, diameter, and length of the hydraulic pipeline and opening pressure of safety valve on the pressure fluctuation and pressure steady-time during transfer process were studied. The transfer system was optimally designed based on the results of parametric analysis. The sea trial verified that the system could transfer sediment with a pressure exceeding 90 MPa into a culture vessel with low-pressure fluctuating pressure.