Fengchi Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fengchi Wang has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Chao Guo
Shenyang Jianzhu University
1 shared publication- Hao Guo
Engineering Research Institute of Appraisal and Strengthening, Shandong Jianzhu University, No. 96, Lishan Road, Lixia District, Jinan 250000, China
1 shared publication He Liu
School of Transportation Engineering Shenyang Jianzhu University Shenyang China
1 shared publicationHuaizhi Zhang
School of Transportation Engineering Shenyang Jianzhu University Shenyang China
1 shared publication- Jian Liu
School of Science, Shenyang Jianzhu University, No. 25, Hunnan Middle Road, Hunnan District, Shenyang 110168, China
1 shared publication Naisheng Guo
College of Transportation Engineering Dalian Maritime University Dalian China
1 shared publication
Latest Publications
- Open Access
Bond Behavior of Glass Fine Aggregate Reinforcement Concrete after Chloride Erosion under Deicing Salt
This paper reports on the bond behavior of glass fine aggregate reinforced concrete (GFARC) under chloride erosion, considering the chloride solution and glass fine aggregate (GFA) exchange rates as variable parameters. The 16 groups of specimens are designed to conduct central pull-out tests after chloride erosion. The experimental results are analyzed, such as the τ–s curve, ultimate bond strength, peak slip, and bond stiffness. The results indicated that the degree of reinforcement corrosion in GFARC is low under the action of chloride corrosion. Compared with natural aggregate-reinforced concrete (NARC), the ultimate bond strength and bond stiffness of GFARC improve under the same chloride corrosion. The ultimate bond strengths of 25% GFARC, 50% GFARC, and 75% GFARC increased by 7%, 7.85%, and 17.31%, respectively, under natural conditions. Under 3.5% chlorine erosion, the GFARC group increased by 4.67%, 4.83%, and 13.53%, respectively. Under 5% chlorine erosion, the GFARC group increased by 5.54%, 6.24%, and 12.64%, respectively. Glass fine can improve the bonding performance between concrete and steel bars, and its effect is related to the replacement rate. The shape and chemical characteristics of glass sand play an important role in this process and became more prominent with the deepening of the effect. Through the analysis of the experimental results, this paper further elaborated on the bonding mechanism of GFARC under the influence of chloride corrosion. The research indicates that the use of GFA has a great advantage in improving the bond performance under chloride erosion.
Open AccessBond Behavior of Glass Fine Aggregate Reinforcement Concrete after Chloride Erosion under Deicing Salt
This paper reports on the bond behavior of glass fine aggregate reinforced concrete (GFARC) under chloride erosion, considering the chloride solution and glass fine aggregate (GFA) exchange rates as variable parameters. The 16 groups of specimens are designed to conduct central pull-out tests after chloride erosion. The experimental results are analyzed, such as the τ–s curve, ultimate bond strength, peak slip, and bond stiffness. The results indicated that the degree of reinforcement corrosion in GFARC is low under the action of chloride corrosion. Compared with natural aggregate-reinforced concrete (NARC), the ultimate bond strength and bond stiffness of GFARC improve under the same chloride corrosion. The ultimate bond strengths of 25% GFARC, 50% GFARC, and 75% GFARC increased by 7%, 7.85%, and 17.31%, respectively, under natural conditions. Under 3.5% chlorine erosion, the GFARC group increased by 4.67%, 4.83%, and 13.53%, respectively. Under 5% chlorine erosion, the GFARC group increased by 5.54%, 6.24%, and 12.64%, respectively. Glass fine can improve the bonding performance between concrete and steel bars, and its effect is related to the replacement rate. The shape and chemical characteristics of glass sand play an important role in this process and became more prominent with the deepening of the effect. Through the analysis of the experimental results, this paper further elaborated on the bonding mechanism of GFARC under the influence of chloride corrosion. The research indicates that the use of GFA has a great advantage in improving the bond performance under chloride erosion.
- 19 August 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (40)
Evaluation and mechanism of interaction effect between thermoplastic polyurethane elastomer modified asphalt and fillers
Thermoplastic polyurethane (TPU) elastomer modified asphalt mastic is regarded as a two‐phase composite composed of TPU modified asphalt and filler according to the micro‐mechanics theory of composites, and its rheological properties are affected by various types of asphalt, mineral filler, and dosage. In this study, different kinds of fillers (limestone, granite, fly‐ash, coal gangue) and TPU modified asphalt (grade of base asphalt labeled as 90# and polyether‐based TPU modified asphalt with Ch = 40, r = 1.05 through a self‐determined laboratory process) were prepared into asphalt mastic. The dynamic shear rheology and bending beam rheology (BBR) were used to test and evaluate the high and low temperature rheological properties of TPU modified asphalt mastic with different kinds of fillers. The scanning electron microscopy, atomic force microscopy, Brunauer, Emmett, and Teller method, X‐ray diffraction, Fourier transform infrared spectroscopy, and other tests were used to analyze the interaction mechanism between fillers and TPU modified asphalt. The results indicated that the enhancement coefficients and of different fillers are obtained based on the |G*| and S master curve, and the optimum ratio range in TPU modified asphalt with different kinds of fillers are from 1.04 to 1.41. The interaction parameters Luis Ibrarra‐A (A‐values) and Palierne‐C (C‐values) were obviously better than K. Ziegel‐B (B‐values) and Complex shear modulus coefficient (‐values). The surface of coal gangue was rough and emerged micro‐void, the BET specific surface area reached 2.681 m2/g, which was the largest than the other fillers, and the interaction with TPU modified asphalt was the strongest due to the C‐value is 1.562. The chemical composition of coal gangue played an important role in the interaction with asphalt. Physical adsorption is the main mechanism between TPU modified asphalt and fillers. The absorption peak of the original TPU modified asphalt disappeared at 3343 cm−1, and more CaO and Al2O3 in coal gangue are helpful to improve the interaction ability with TPU modified asphalt. There is a significant correlation between the number and area ratio of “bee‐like structure” in TPU modified asphalt mastic and interaction coefficient C‐values.
- 19 August 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (40)
Evaluation and mechanism of interaction effect between thermoplastic polyurethane elastomer modified asphalt and fillers
Thermoplastic polyurethane (TPU) elastomer modified asphalt mastic is regarded as a two‐phase composite composed of TPU modified asphalt and filler according to the micro‐mechanics theory of composites, and its rheological properties are affected by various types of asphalt, mineral filler, and dosage. In this study, different kinds of fillers (limestone, granite, fly‐ash, coal gangue) and TPU modified asphalt (grade of base asphalt labeled as 90# and polyether‐based TPU modified asphalt with Ch = 40, r = 1.05 through a self‐determined laboratory process) were prepared into asphalt mastic. The dynamic shear rheology and bending beam rheology (BBR) were used to test and evaluate the high and low temperature rheological properties of TPU modified asphalt mastic with different kinds of fillers. The scanning electron microscopy, atomic force microscopy, Brunauer, Emmett, and Teller method, X‐ray diffraction, Fourier transform infrared spectroscopy, and other tests were used to analyze the interaction mechanism between fillers and TPU modified asphalt. The results indicated that the enhancement coefficients and of different fillers are obtained based on the |G*| and S master curve, and the optimum ratio range in TPU modified asphalt with different kinds of fillers are from 1.04 to 1.41. The interaction parameters Luis Ibrarra‐A (A‐values) and Palierne‐C (C‐values) were obviously better than K. Ziegel‐B (B‐values) and Complex shear modulus coefficient (‐values). The surface of coal gangue was rough and emerged micro‐void, the BET specific surface area reached 2.681 m2/g, which was the largest than the other fillers, and the interaction with TPU modified asphalt was the strongest due to the C‐value is 1.562. The chemical composition of coal gangue played an important role in the interaction with asphalt. Physical adsorption is the main mechanism between TPU modified asphalt and fillers. The absorption peak of the original TPU modified asphalt disappeared at 3343 cm−1, and more CaO and Al2O3 in coal gangue are helpful to improve the interaction ability with TPU modified asphalt. There is a significant correlation between the number and area ratio of “bee‐like structure” in TPU modified asphalt mastic and interaction coefficient C‐values.
- Open Access
Research on Micro-Mechanics Modelling of TPU-Modified Asphalt Mastic
To explore the interactions and mechanisms of Thermoplastic polyurethane (TPU)-modified asphalt with different kinds of mineral fillers, a micro-mechanical model for TPU-modified asphalt mastic was established, which considered the interaction between asphalt and mineral powder to effectively analyze the internal mechanisms affecting the rheological properties of TPU-modified asphalt mastic. In this study, according to the micro-mechanics of composites’ principles, the dynamic shear modulus (|G*|) of asphalt mastic with different mass ratios of filler/asphalt (F/A) was calculated by the homogenize morphologically representative pattern (H-MRP) model. The key ratio of F/A, which is close to the test result, can be determined, and a four-phase H-MRP model of the TPU modified asphalt mastic was established after considering the structure of asphalt layer thickness. The results were interpreted based on the known reactions of TPU with asphalt model compounds. The |G*| of TPU-modified asphalt mastic was predicted by using this model. Furthermore, the effects of the complex shear modulus, Poisson’s ratio of TPU-modified asphalt, Poisson’s ratio, particle size of mineral powder, and thickness of the structural asphalt layer in the |G*| of TPU-modified asphalt mastic were analyzed in the whole-model construction, as well as the internal mechanism of the |G*| of TPU modified asphalt mastic. In addition, can also be found the predicted value of |G*| calculated by the four-phase H-MRP model is close to the experimental value after choosing a structural asphalt layer of appropriate thickness.
Open AccessResearch on Micro-Mechanics Modelling of TPU-Modified Asphalt Mastic
To explore the interactions and mechanisms of Thermoplastic polyurethane (TPU)-modified asphalt with different kinds of mineral fillers, a micro-mechanical model for TPU-modified asphalt mastic was established, which considered the interaction between asphalt and mineral powder to effectively analyze the internal mechanisms affecting the rheological properties of TPU-modified asphalt mastic. In this study, according to the micro-mechanics of composites’ principles, the dynamic shear modulus (|G*|) of asphalt mastic with different mass ratios of filler/asphalt (F/A) was calculated by the homogenize morphologically representative pattern (H-MRP) model. The key ratio of F/A, which is close to the test result, can be determined, and a four-phase H-MRP model of the TPU modified asphalt mastic was established after considering the structure of asphalt layer thickness. The results were interpreted based on the known reactions of TPU with asphalt model compounds. The |G*| of TPU-modified asphalt mastic was predicted by using this model. Furthermore, the effects of the complex shear modulus, Poisson’s ratio of TPU-modified asphalt, Poisson’s ratio, particle size of mineral powder, and thickness of the structural asphalt layer in the |G*| of TPU-modified asphalt mastic were analyzed in the whole-model construction, as well as the internal mechanism of the |G*| of TPU modified asphalt mastic. In addition, can also be found the predicted value of |G*| calculated by the four-phase H-MRP model is close to the experimental value after choosing a structural asphalt layer of appropriate thickness.
- 3 January 2019
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 49 (5) , 543-551
Magnetic Effect on the Engineering Properties of Remolded Cohesive Soil
- 3 January 2019
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 49 (5) , 543-551
Magnetic Effect on the Engineering Properties of Remolded Cohesive Soil
- Open Access
- 7 July 2018
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 22 (9) , 3409-3418
Experimental Study on Bond Strength of Deformed Steel Bars in Recycled Glass Aggregate Concrete
- 7 July 2018
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 22 (9) , 3409-3418
Open AccessExperimental Study on Bond Strength of Deformed Steel Bars in Recycled Glass Aggregate Concrete