Xiao Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiao Tang has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
- Teng Qiu
Southeast University
12 shared publications - Xingce Fan
Key Laboratory of Quantum Materials and Devices of Ministry of Education, School of Physics, Southeast University, Nanjing 211189, People’s Republic of China
11 shared publications - Qi Hao
Southeast University
10 shared publications - Xing Zhao
Key Laboratory of Quantum Materials and Devices of Ministry of Education, School of Physics, Southeast University, Nanjing 211189, People’s Republic of China
8 shared publications - Mingze Li
School of Physics, Southeast University, Nanjing 211189, P. R. China
7 shared publications - Guoqun Li
Key Laboratory of Quantum Materials and Devices of Ministry of Education, School of Physics, Southeast University 1 , Nanjing 211189
6 shared publications
Latest Publications
- Open Access
- 7 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Large-area two-dimensional MoO3 as a high-κ dielectric for van der Waals integration
Large-area high-quality dielectrics are essential for the integration of two-dimensional (2D) transistors. However, this integration remains challenging, especially for conventional dielectrics that require deposition processes. Adopting van der Waals (vdW) dielectrics is attractive. Molybdenum trioxide (α-MoO 3 ) has been demonstrated as a vdW dielectric in 2D field-effect transistors (FETs), but previous demonstrations showed limited performance and small size. Here, we grow large-area single-crystalline MoO 3 with uniform thickness and explore its properties as a dielectric. Single-crystalline MoO 3 reaches the millimeter scale and maintains a high dielectric constant of ~ 18.5, low gate leakage of approximately 10 −2 A cm −2 at 3.0 MV cm −1, and a large breakdown field of ~ 26.75 MV cm −1 . Top-gated molybdenum disulfide (MoS 2 ) transistors exhibit an average subthreshold swing of ~ 71 mV dec −1 , and an on/off current ratio exceeding 10 8 . Furthermore, we demonstrate MoO 3 -based integrated circuits and low-power complementary metal-oxide-semiconductor (CMOS) inverters.
- 7 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessLarge-area two-dimensional MoO3 as a high-κ dielectric for van der Waals integration
Large-area high-quality dielectrics are essential for the integration of two-dimensional (2D) transistors. However, this integration remains challenging, especially for conventional dielectrics that require deposition processes. Adopting van der Waals (vdW) dielectrics is attractive. Molybdenum trioxide (α-MoO 3 ) has been demonstrated as a vdW dielectric in 2D field-effect transistors (FETs), but previous demonstrations showed limited performance and small size. Here, we grow large-area single-crystalline MoO 3 with uniform thickness and explore its properties as a dielectric. Single-crystalline MoO 3 reaches the millimeter scale and maintains a high dielectric constant of ~ 18.5, low gate leakage of approximately 10 −2 A cm −2 at 3.0 MV cm −1, and a large breakdown field of ~ 26.75 MV cm −1 . Top-gated molybdenum disulfide (MoS 2 ) transistors exhibit an average subthreshold swing of ~ 71 mV dec −1 , and an on/off current ratio exceeding 10 8 . Furthermore, we demonstrate MoO 3 -based integrated circuits and low-power complementary metal-oxide-semiconductor (CMOS) inverters.
- 13 December 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (51) , 12535-12542
MXene-Based Micromotors: Active Molecular Enrichment and Selective Raman Enhancement
This Letter introduces MXene-based rod-like micromotors, consisting of assembled Fe3O4@Ti2C core-shell nanospheres, that leverage external magnetic fields for active molecular enrichment and selective surface-enhanced Raman scattering (SERS) sensing. These micromotors enhance SERS performance by concentrating target molecules directly onto MXene surfaces during movement, enabling rapid and precise detection. Our investigation reveals how these micromotors optimize SERS through effective molecular manipulation and explores the selective Raman enhancement facilitated by the MXene-based platforms, demonstrating their significant potential in analytical applications.
- 13 December 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (51) , 12535-12542
MXene-Based Micromotors: Active Molecular Enrichment and Selective Raman Enhancement
This Letter introduces MXene-based rod-like micromotors, consisting of assembled Fe3O4@Ti2C core-shell nanospheres, that leverage external magnetic fields for active molecular enrichment and selective surface-enhanced Raman scattering (SERS) sensing. These micromotors enhance SERS performance by concentrating target molecules directly onto MXene surfaces during movement, enabling rapid and precise detection. Our investigation reveals how these micromotors optimize SERS through effective molecular manipulation and explores the selective Raman enhancement facilitated by the MXene-based platforms, demonstrating their significant potential in analytical applications.
- 12 November 2024
- Published by Wiley in Laser & Photonics Reviews
- Vol. 19 (4)
Direct Linearly Polarized Emission in van der Waals LEDs via Flexoelectric Effect
Following the rapid development of information technology, modern polarized light, which is a critical component for display and data transmission, has been in demand for miniaturization and high efficiency, rendering two‐dimensional (2D) semiconductors potential candidates. The traditional polarized light is usually generated by external optical structures or polarizers that influence the scaling and bring up losses. Previous works have reported polarized light emission from inversion‐asymmetric 2D semiconductors such as black phosphorus (BP), black arsenide phosphorus (AsP), and rhenium disulfide (ReS 2 ), however, their emission wavelengths are not in the visible range. Here, a direct emission of linearly polarized light is demonstrated from van der Waals light–emitting diodes (vdWLEDs) via the flexoelectric effects by inducing the non‐uniform strain in monolayer (ML) transition metal dichalcogenides (TMDCs). In this work, the effects of strain including excitonic binding energy and exciton dipole moment distribution is analyzed by the density functional theory (DFT) then we show that linearly polarized photoluminescence (PL) with a degree of linear polarization (DOLP) of ≈17% can be realized at room temperature (RT), and the polarization angle is perpendicular to the direction of the strain‐gradient. By incorporating the strained ML TMDCs into vdWLEDs, electroluminescence (EL) with DOLP of ≈19% can be observed at RT. This work puts forward a direct and universal strategy for fabricating polarized LEDs based on inversion‐symmetric semiconductors.
- 12 November 2024
- Published by Wiley in Laser & Photonics Reviews
- Vol. 19 (4)
Direct Linearly Polarized Emission in van der Waals LEDs via Flexoelectric Effect
Following the rapid development of information technology, modern polarized light, which is a critical component for display and data transmission, has been in demand for miniaturization and high efficiency, rendering two‐dimensional (2D) semiconductors potential candidates. The traditional polarized light is usually generated by external optical structures or polarizers that influence the scaling and bring up losses. Previous works have reported polarized light emission from inversion‐asymmetric 2D semiconductors such as black phosphorus (BP), black arsenide phosphorus (AsP), and rhenium disulfide (ReS 2 ), however, their emission wavelengths are not in the visible range. Here, a direct emission of linearly polarized light is demonstrated from van der Waals light–emitting diodes (vdWLEDs) via the flexoelectric effects by inducing the non‐uniform strain in monolayer (ML) transition metal dichalcogenides (TMDCs). In this work, the effects of strain including excitonic binding energy and exciton dipole moment distribution is analyzed by the density functional theory (DFT) then we show that linearly polarized photoluminescence (PL) with a degree of linear polarization (DOLP) of ≈17% can be realized at room temperature (RT), and the polarization angle is perpendicular to the direction of the strain‐gradient. By incorporating the strained ML TMDCs into vdWLEDs, electroluminescence (EL) with DOLP of ≈19% can be observed at RT. This work puts forward a direct and universal strategy for fabricating polarized LEDs based on inversion‐symmetric semiconductors.
- Top Cited Papers
- 11 October 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (42) , 13447-13454
Wearable Hydrogel SERS Chip Utilizing Plasmonic Trimers for Uric Acid Analysis in Sweat
Uric acid is typically measured through blood tests, which can be inconvenient and uncomfortable for patients. Herein, we propose a wearable surface-enhanced Raman scattering (SERS) chip, incorporating a hydrogel membrane with integrated plasmonic trimers, for noninvasive monitoring of uric acid in sweat. The plasmonic trimers feature sub 5 nm nanogaps, generating strong electromagnetic fields to boost the Raman signal of surrounding molecules. Simultaneously, the hydrogel membrane pumps sweat through these gaps, efficiently capturing sweat biomarkers for SERS detection. The chip can achieve saturation adsorption of sweat within 5 min, eliminating variations in individual sweat production rates. Dynamic SERS tracking of uric acid and lactic acid levels during anaerobic exercise reveals a temporary suppression of uric acid metabolism, likely due to metabolic competition with lactic acid. Furthermore, long-term monitoring correlates well with blood test results, confirming that regular exercise helps reduce serum uric acid levels and supporting its potential in managing hyperuricemia.
- 11 October 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (42) , 13447-13454
Top Cited PapersWearable Hydrogel SERS Chip Utilizing Plasmonic Trimers for Uric Acid Analysis in Sweat
Uric acid is typically measured through blood tests, which can be inconvenient and uncomfortable for patients. Herein, we propose a wearable surface-enhanced Raman scattering (SERS) chip, incorporating a hydrogel membrane with integrated plasmonic trimers, for noninvasive monitoring of uric acid in sweat. The plasmonic trimers feature sub 5 nm nanogaps, generating strong electromagnetic fields to boost the Raman signal of surrounding molecules. Simultaneously, the hydrogel membrane pumps sweat through these gaps, efficiently capturing sweat biomarkers for SERS detection. The chip can achieve saturation adsorption of sweat within 5 min, eliminating variations in individual sweat production rates. Dynamic SERS tracking of uric acid and lactic acid levels during anaerobic exercise reveals a temporary suppression of uric acid metabolism, likely due to metabolic competition with lactic acid. Furthermore, long-term monitoring correlates well with blood test results, confirming that regular exercise helps reduce serum uric acid levels and supporting its potential in managing hyperuricemia.
- 27 September 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (20) , 15043-15051
Unveiling Plasmon-Induced Suzuki–Miyaura Reactions on Silver Nanoparticles via Raman Spectroscopy
- 27 September 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (20) , 15043-15051
Unveiling Plasmon-Induced Suzuki–Miyaura Reactions on Silver Nanoparticles via Raman Spectroscopy
- 25 September 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (40) , 20945-20953
Photoinduced Charge Transfer Empowers Ta4C3 and Nb4C3 MXenes with High SERS Performance
This study introduces two-dimensional (2D) Ta4C3 and Nb4C3 MXenes as outstanding materials for surface-enhanced Raman scattering (SERS) sensing, marking a significant departure from traditional noble-metal substrates. These MXenes exhibit exceptional SERS capabilities, achieving enhancement factors around 105 and detection limits as low as 10-7 M for various analytes, including environmental pollutants and drugs. The core of their SERS functionality is attributed to the robust interfacial photoinduced charge-transfer interactions between the MXenes and the adsorbed molecules. This deep insight not only advances our understanding of MXene materials in SERS applications but also opens new avenues for developing highly sensitive and selective SERS sensors. The potential of Ta4C3 and Nb4C3 MXenes to revolutionize SERS technology underscores their importance in environmental monitoring, food safety, and beyond.
- 25 September 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (40) , 20945-20953
Photoinduced Charge Transfer Empowers Ta4C3 and Nb4C3 MXenes with High SERS Performance
This study introduces two-dimensional (2D) Ta4C3 and Nb4C3 MXenes as outstanding materials for surface-enhanced Raman scattering (SERS) sensing, marking a significant departure from traditional noble-metal substrates. These MXenes exhibit exceptional SERS capabilities, achieving enhancement factors around 105 and detection limits as low as 10-7 M for various analytes, including environmental pollutants and drugs. The core of their SERS functionality is attributed to the robust interfacial photoinduced charge-transfer interactions between the MXenes and the adsorbed molecules. This deep insight not only advances our understanding of MXene materials in SERS applications but also opens new avenues for developing highly sensitive and selective SERS sensors. The potential of Ta4C3 and Nb4C3 MXenes to revolutionize SERS technology underscores their importance in environmental monitoring, food safety, and beyond.
- Top Cited PapersOpen Access
- 12 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
Plasmonic trimers designed as SERS-active chemical traps for subtyping of lung tumors
Plasmonic materials can generate strong electromagnetic fields to boost the Raman scattering of surrounding molecules, known as surface-enhanced Raman scattering. However, these electromagnetic fields are heterogeneous, with only molecules located at the ‘hotspots’, which account for ≈ 1% of the surface area, experiencing efficient enhancement. Herein, we propose patterned plasmonic trimers, consisting of a pair of plasmonic dimers at the bilateral sides and a trap particle positioned in between, to address this challenge. The trimer configuration selectively directs probe molecules to the central traps where ‘hotspots’ are located through chemical affinity, ensuring a precise spatial overlap between the probes and the location of maximum field enhancement. We investigate the Raman enhancement of the Au@Al2O3-Au-Au@Al2O3 trimers, achieving a detection limit of 10−14 M of 4-methylbenzenethiol, 4-mercaptopyridine, and 4-aminothiophenol. Moreover, single-molecule SERS sensitivity is demonstrated by a bi-analyte method. Benefiting from this sensitivity, our approach is employed for the early detection of lung tumors using fresh tissues. Our findings suggest that this approach is sensitive to adenocarcinoma but not to squamous carcinoma or benign cases, offering insights into the differentiation between lung tumor subtypes.
- 12 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
Top Cited PapersOpen AccessPlasmonic trimers designed as SERS-active chemical traps for subtyping of lung tumors
Plasmonic materials can generate strong electromagnetic fields to boost the Raman scattering of surrounding molecules, known as surface-enhanced Raman scattering. However, these electromagnetic fields are heterogeneous, with only molecules located at the ‘hotspots’, which account for ≈ 1% of the surface area, experiencing efficient enhancement. Herein, we propose patterned plasmonic trimers, consisting of a pair of plasmonic dimers at the bilateral sides and a trap particle positioned in between, to address this challenge. The trimer configuration selectively directs probe molecules to the central traps where ‘hotspots’ are located through chemical affinity, ensuring a precise spatial overlap between the probes and the location of maximum field enhancement. We investigate the Raman enhancement of the Au@Al2O3-Au-Au@Al2O3 trimers, achieving a detection limit of 10−14 M of 4-methylbenzenethiol, 4-mercaptopyridine, and 4-aminothiophenol. Moreover, single-molecule SERS sensitivity is demonstrated by a bi-analyte method. Benefiting from this sensitivity, our approach is employed for the early detection of lung tumors using fresh tissues. Our findings suggest that this approach is sensitive to adenocarcinoma but not to squamous carcinoma or benign cases, offering insights into the differentiation between lung tumor subtypes.
- 5 July 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (28) , 7183-7190
Mechanism Switch in Surface-Enhanced Raman Scattering: The Role of Nanoparticle Dimensions
Surface-enhanced Raman scattering (SERS) is renowned for amplifying Raman signals, with electromagnetic mechanism (EM) enhancement arising from localized surface plasmon resonances and chemical mechanism (CM) enhancement as a result of charge transfer interactions. Despite the conventional emphasis on EM as a result of plasmonic effects, recent findings highlight the significance of CM when noble metals appear as smaller entities. However, the threshold size of the noble metal clusters/particles corresponding to the switch in SERS mechanisms is not clear at present. In this work, the VSe2-xOx/Au composites with different Au sizes are employed, in which a clear view of the SERS mechanism switch is observed at the Au size range of 16-21 nm. Our findings not only provide insight into the impact of noble metal size on SERS efficiency but also offer quantitative data to assist researchers in making informed judgments when analyzing SERS mechanisms.
- 5 July 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (28) , 7183-7190
Mechanism Switch in Surface-Enhanced Raman Scattering: The Role of Nanoparticle Dimensions
Surface-enhanced Raman scattering (SERS) is renowned for amplifying Raman signals, with electromagnetic mechanism (EM) enhancement arising from localized surface plasmon resonances and chemical mechanism (CM) enhancement as a result of charge transfer interactions. Despite the conventional emphasis on EM as a result of plasmonic effects, recent findings highlight the significance of CM when noble metals appear as smaller entities. However, the threshold size of the noble metal clusters/particles corresponding to the switch in SERS mechanisms is not clear at present. In this work, the VSe2-xOx/Au composites with different Au sizes are employed, in which a clear view of the SERS mechanism switch is observed at the Au size range of 16-21 nm. Our findings not only provide insight into the impact of noble metal size on SERS efficiency but also offer quantitative data to assist researchers in making informed judgments when analyzing SERS mechanisms.
- Top Cited Papers
- 11 February 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (19) , e2312348
Exploring and Engineering 2D Transition Metal Dichalcogenides toward Ultimate SERS Performance
Surface‐enhanced Raman spectroscopy (SERS) is an ultrasensitive surface analysis technique that is widely used in chemical sensing, bioanalysis, and environmental monitoring. The design of the SERS substrates is crucial for obtaining high‐quality SERS signals. Recently, 2D transition metal dichalcogenides (2D TMDs) have emerged as high‐performance SERS substrates due to their superior stability, ease of fabrication, biocompatibility, controllable doping, and tunable bandgaps and excitons. In this review, a systematic overview of the latest advancements in 2D TMDs SERS substrates is provided. This review comprehensively summarizes the candidate 2D TMDs SERS materials, elucidates their working principles for SERS, explores the strategies to optimize their SERS performance, and highlights their practical applications. Particularly delved into are the material engineering strategies, including defect engineering, alloy engineering, thickness engineering, and heterojunction engineering. Additionally, the challenges and future prospects associated with the development of 2D TMDs SERS substrates are discussed, outlining potential directions that may lead to significant breakthroughs in practical applications.
- 11 February 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (19) , e2312348
Top Cited PapersExploring and Engineering 2D Transition Metal Dichalcogenides toward Ultimate SERS Performance
Surface‐enhanced Raman spectroscopy (SERS) is an ultrasensitive surface analysis technique that is widely used in chemical sensing, bioanalysis, and environmental monitoring. The design of the SERS substrates is crucial for obtaining high‐quality SERS signals. Recently, 2D transition metal dichalcogenides (2D TMDs) have emerged as high‐performance SERS substrates due to their superior stability, ease of fabrication, biocompatibility, controllable doping, and tunable bandgaps and excitons. In this review, a systematic overview of the latest advancements in 2D TMDs SERS substrates is provided. This review comprehensively summarizes the candidate 2D TMDs SERS materials, elucidates their working principles for SERS, explores the strategies to optimize their SERS performance, and highlights their practical applications. Particularly delved into are the material engineering strategies, including defect engineering, alloy engineering, thickness engineering, and heterojunction engineering. Additionally, the challenges and future prospects associated with the development of 2D TMDs SERS substrates are discussed, outlining potential directions that may lead to significant breakthroughs in practical applications.
- 30 January 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (6) , 2110-2117
Probing Oxidation Mechanisms in Plasmonic Catalysis: Unraveling the Role of Reactive Oxygen Species
Plasmon-induced oxidation has conventionally been attributed to the transfer of plasmonic hot holes. However, this theoretical framework encounters challenges in elucidating the latest experimental findings, such as enhanced catalytic efficiency under uncoupled irradiation conditions and superior oxidizability of silver nanoparticles. Herein, we employ liquid surface-enhanced Raman spectroscopy (SERS) as a real-time and in situ tool to explore the oxidation mechanisms in plasmonic catalysis, taking the decarboxylation of p-mercaptobenzoic acid (PMBA) as a case study. Our findings suggest that the plasmon-induced oxidation is driven by reactive oxygen species (ROS) rather than hot holes, holding true for both the Au and Ag nanoparticles. Subsequent investigations suggest that plasmon-induced ROS may arise from hot carriers or energy transfer mechanisms, exhibiting selectivity under different experimental conditions. The observations were substantiated by investigating the cleavage of the carbon-boron bonds. Furthermore, the underlying mechanisms were clarified by energy level theories, advancing our understanding of plasmonic catalysis.
- 30 January 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (6) , 2110-2117
Probing Oxidation Mechanisms in Plasmonic Catalysis: Unraveling the Role of Reactive Oxygen Species
Plasmon-induced oxidation has conventionally been attributed to the transfer of plasmonic hot holes. However, this theoretical framework encounters challenges in elucidating the latest experimental findings, such as enhanced catalytic efficiency under uncoupled irradiation conditions and superior oxidizability of silver nanoparticles. Herein, we employ liquid surface-enhanced Raman spectroscopy (SERS) as a real-time and in situ tool to explore the oxidation mechanisms in plasmonic catalysis, taking the decarboxylation of p-mercaptobenzoic acid (PMBA) as a case study. Our findings suggest that the plasmon-induced oxidation is driven by reactive oxygen species (ROS) rather than hot holes, holding true for both the Au and Ag nanoparticles. Subsequent investigations suggest that plasmon-induced ROS may arise from hot carriers or energy transfer mechanisms, exhibiting selectivity under different experimental conditions. The observations were substantiated by investigating the cleavage of the carbon-boron bonds. Furthermore, the underlying mechanisms were clarified by energy level theories, advancing our understanding of plasmonic catalysis.