MRMartin Rauber

Martin Rauber

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Martin Rauber has a total of 75 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Biomass burning increase in Southeast Asia is dominated by char black carbon

    by Wenhuai Song, Ying Zhang, Meng Gao, Feng Xie, Fang Cao, Martin Rauber, Sawaeng Kawichai, Tippawan Prapamontol, Sönke Szidat, Yiran Peng, et al.


  • Biomass Burning Greatly Enhances the Concentration of Fine Carbonaceous Aerosols at an Urban Area in Upper Northern Thailand: Evidence From the Radiocarbon‐Based Source Apportionment on Size‐Resolved Aerosols

    by Wenhuai Song, Yihang Hong, Yuxian Zhang, Fang Cao, Martin Rauber, Teetawat Santijitpakdee, Sawaeng Kawichai, Tippawan Prapamontol, Sönke Szidat, Yan‐Lin Zhang

    To study the role of biomass burning (BB) in air pollution at upper‐northern Thailand, the source apportionment of size‐resolved carbonaceous aerosols from Chiang Mai was carried out based on the radiocarbon (14C) analysis. The fraction of modern carbon (F14C) was generally decreased with particle size increasing and with the highest and lowest values of 0.90 ± 0.04 and 0.61 ± 0.04, respectively. Elemental carbon, regardless of emission sources, and BB‐derived organic carbon (OCbb) showed unimodal size distribution patterns with peaks at 0.43–0.65 μm. Fossil‐fuel derived‐OC (OCf) displayed a bimodal mode with the major peak at 2.1–10 μm, and the minor one at 0.43–0.65 μm. The biogenic secondary organic aerosols (BSOA) showed a typical fine‐mode unimodal size distribution pattern during the high BB (HBB) season, and a bimodal mode during the low BB season. The BSOA concentration increased by 189% ± 80% due to the interaction with open BB plums during HBB season, which was quantified by a 14C‐involved random forest model. Besides, the concentration of biogenic primary organic aerosols also showed a significant increment during the HBB season, especially in sub‐microns. Our results highlight the critical importance of controlling open fires to reduce air pollutants and the potential exposure risk.


  • Top Cited Papers
    Open Access

    Local incomplete combustion emissions define the PM2.5 oxidative potential in Northern India

    by Deepika Bhattu, Sachchida Nand Tripathi, Himadri Sekhar Bhowmik, Vaios Moschos, Chuan Ping Lee, Martin Rauber, Gary Salazar, Gülcin Abbaszade, Tianqu Cui, Jay G. Slowik, et al.

    The oxidative potential (OP) of particulate matter (PM) is a major driver of PM-associated health effects. In India, the emission sources defining PM-OP, and their local/regional nature, are yet to be established. Here, to address this gap we determine the geographical origin, sources of PM, and its OP at five Indo-Gangetic Plain sites inside and outside Delhi. Our findings reveal that although uniformly high PM concentrations are recorded across the entire region, local emission sources and formation processes dominate PM pollution. Specifically, ammonium chloride, and organic aerosols (OA) from traffic exhaust, residential heating, and oxidation of unsaturated vapors from fossil fuels are the dominant PM sources inside Delhi. Ammonium sulfate and nitrate, and secondary OA from biomass burning vapors, are produced outside Delhi. Nevertheless, PM-OP is overwhelmingly driven by OA from incomplete combustion of biomass and fossil fuels, including traffic. These findings suggest that addressing local inefficient combustion processes can effectively mitigate PM health exposure in northern India.


  • Open Access

    Comment on egusphere-2023-615

    by Karl Espen Yttri, Are Bäcklund, Franz Conen, Sabine Eckhardt, Nikolaos Evangeliou, Markus Fiebig, Anne Kasper-Giebl, Avram Gold, Hans Gundersen, Cathrine Lund Myhre, et al.

    Our current understanding of Arctic carbonaceous aerosol (CA) is rudimentary and there is a lack of long-term observations for many components, such as organic aerosol (OA), exceptions to this include equivalent black carbon (eBC) and methane sulfonic acid (MSA). To address this, we analyzed long-term measurements of organic carbon (OC), elemental carbon (EC), and source-specific organic tracers from 2017 to 2020 to constrain CA sources in the rapidly changing Arctic. We also used absorption photometer (aethalometer) measurements to constrain equivalent BC from biomass burning (eBCBB) and fossil fuel combustion (eBCFF) using Positive Matrix Factorization (PMF). Our analysis showed that organic tracers are essential to understand Arctic CA sources. For 2017 to 2020, levoglucosan had a bimodal seasonality, with a signal from residential wood combustion (RWC) in the heating season (H-season; November to May) and from wildfires (WF) in the non-heating season (NH-season; June to October), demonstrating a pronounced inter-annual variability in the WF influence. Biogenic secondary organic aerosol (BSOA) species (2-methyltetrols) from isoprene oxidation appeared only in the NH-season, peaking in July to August. Intrusions of warm air masses from Siberia in summer caused three- and ninefold increases in 2-methyltetrols compared to 2017 to 2018, in 2019 and 2020, respectively, warranting investigation of the local vs. the long-range atmospheric transport (LRT) contribution, as certain Arctic vegetation has highly temperature sensitive biogenic volatile organic compounds (BVOC) emission rates. Primary biological aerosol particles (PBAP) tracers (various sugars and sugar-alcohols) were elevated in the NH-season but evolved differently, whereas cellulose was completely decoupled from the other PBAP tracers. Peak levels of most PBAP tracers and of 2-methyltetrols were associated with WF emissions, demonstrating the importance of measuring a broad spectrum of source specific tracers to understand sources and dynamics of CA. Finally, CA seasonality is heavily influenced by long-range atmospheric transport (LRT) episodes, since background levels are extremely low. E.g., we find the OA peak in the NH-season is as strongly influenced by LRT as is EC during Arctic Haze (AH). Source apportionment of CA by Latin Hypercube Sampling (LHS) showed a mixed contribution from RWC (46 %), fossil fuel (FF) sources (27 %), and BSOA (25 %) in the H-season, whereas BSOA (56 %) prevailed over WF (26 %) and FF (15 %) in the NH-season. Source apportionment of eBC by PMF showed that FF combustion dominated eBC (70 ± 2.7 %), whereas RWC (22 ± 2.7 %) was more abundant than WF (8.0 ± 2.9 %). Modeled BC concentrations from FLEXPART attributed an almost equal share to FF (51 ± 3.1 %) and BB. Both FLEXPART and the PMF analysis concluded that RWC is a more important source than WF. However, with a modeled RWC of 30 ± 4.1 % and WF of 19 ± 2.8 %, FLEXPART suggests relatively higher contributions to eBC from these sources. We find that OA (281 ± 106 ng m−3) is a significant fraction of the Arctic PM10 aerosol particle mass, though less than sea salt aerosol (SSA) (682 ± 46.9 ng m−3) and mineral dust (MD) (613 ± 368 ng m−3) as well as typically non-sea-salt sulfate (nssSO42−) (314 ± 62.6 ng m−3), originating mainly from anthropogenic sources in winter and from natural sources in summer. FF combustion was the prevailing source of eBC, whereas RWC made a larger contribution to eBCBB than WF.

  • Open Access

    An optimised organic carbon ∕ elemental carbon (OC ∕ EC) fraction separation method for radiocarbon source apportionment applied to low-loaded Arctic aerosol filters

    by Martin Rauber, Gary Salazar, Karl Espen Yttri, Sönke Szidat

    Radiocarbon (14C) analysis of carbonaceous aerosols is used for source apportionment, separating the carbon content into fossil vs. non-fossil origin, and is particularly useful when applied to subfractions of total carbon (TC), i.e. elemental carbon (EC), organic carbon (OC), water-soluble OC (WSOC), and water-insoluble OC (WINSOC). However, this requires an unbiased physical separation of these fractions, which is difficult to achieve. Separation of EC from OC using thermal–optical analysis (TOA) can cause EC loss during the OC removal step and form artificial EC from pyrolysis of OC (i.e. so-called charring), both distorting the 14C analysis of EC. Previous work has shown that water extraction reduces charring. Here, we apply a new combination of a WSOC extraction and 14C analysis method with an optimised OC/EC separation that is coupled with a novel approach of thermal-desorption modelling for compensation of EC losses. As water-soluble components promote the formation of pyrolytic carbon, water extraction was used to minimise the charring artefact of EC and the eluate subjected to chemical wet oxidation to CO2 before direct 14C analysis in a gas-accepting accelerator mass spectrometer (AMS). This approach was applied to 13 aerosol filter samples collected at the Arctic Zeppelin Observatory (Svalbard) in 2017 and 2018, covering all seasons, which bear challenges for a simplified 14C source apportionment due to their low loading and the large portion of pyrolysable species. Our approach provided a mean EC yield of 0.87±0.07 and reduced the charring to 6.5 % of the recovered EC amounts. The mean fraction modern (F14C) over all seasons was 0.85±0.17 for TC; 0.61±0.17 and 0.66±0.16 for EC before and after correction with the thermal-desorption model, respectively; and 0.81±0.20 for WSOC.


  • Open Access

    Reply on RC2

    by Martin Rauber, Gary Salazar, Karl Espen Yttri, Sönke Szidat

    Radiocarbon (14C) analysis of carbonaceous aerosols is used for source apportionment, separating the carbon content into fossil vs. non-fossil origin, and is particularly useful when applied to subfractions of total carbon (TC), i.e., elemental carbon (EC), organic carbon (OC), water-soluble OC (WSOC), and water-insoluble OC (WINSOC). However, this requires an unbiased physical separation of these fractions, which is difficult to achieve. Separation of EC from OC using thermal-optical analysis (TOA) can cause EC loss during the OC removal step and form artificial EC from pyrolysis of OC (i.e., so-called charring), both distorting the 14C analysis of EC. Previous work showed that water extraction reduces charring. Here, we apply a new combination of a WSOC extraction and 14C analysis method with an optimised OC/EC separation that is coupled with a novel approach of thermal-desorption modelling for compensation of EC losses. As water-soluble components promote the formation of pyrolytic carbon, water extraction was used to minimise the charring artefact of EC, and the eluate subjected to chemical wet oxidation to CO2 before direct 14C analysis in a gas-accepting accelerator mass spectrometer (AMS). This approach was applied to 13 aerosol filter samples collected at the Arctic Zeppelin Observatory (Svalbard) in 2017 and 2018, covering all seasons, which bear challenges for a simplified 14C source apportionment due to their low loading and the large portion of pyrolysable species. Our approach provided a mean EC yield of 0.87 ± 0.07 and reduced the charring to 6.5 % of the recovered EC amounts. The mean Fraction Modern (F14C) over all seasons was 0.85 ± 0.17 for TC, 0.61 ± 0.17 and 0.66 ± 0.16 for EC before and after correction with the thermal-desorption model, respectively, and 0.81 ± 0.20 for WSOC.

  • Open Access

    Reply on RC1

    by Martin Rauber, Gary Salazar, Karl Espen Yttri, Sönke Szidat

    Radiocarbon (14C) analysis of carbonaceous aerosols is used for source apportionment, separating the carbon content into fossil vs. non-fossil origin, and is particularly useful when applied to subfractions of total carbon (TC), i.e., elemental carbon (EC), organic carbon (OC), water-soluble OC (WSOC), and water-insoluble OC (WINSOC). However, this requires an unbiased physical separation of these fractions, which is difficult to achieve. Separation of EC from OC using thermal-optical analysis (TOA) can cause EC loss during the OC removal step and form artificial EC from pyrolysis of OC (i.e., so-called charring), both distorting the 14C analysis of EC. Previous work showed that water extraction reduces charring. Here, we apply a new combination of a WSOC extraction and 14C analysis method with an optimised OC/EC separation that is coupled with a novel approach of thermal-desorption modelling for compensation of EC losses. As water-soluble components promote the formation of pyrolytic carbon, water extraction was used to minimise the charring artefact of EC, and the eluate subjected to chemical wet oxidation to CO2 before direct 14C analysis in a gas-accepting accelerator mass spectrometer (AMS). This approach was applied to 13 aerosol filter samples collected at the Arctic Zeppelin Observatory (Svalbard) in 2017 and 2018, covering all seasons, which bear challenges for a simplified 14C source apportionment due to their low loading and the large portion of pyrolysable species. Our approach provided a mean EC yield of 0.87 ± 0.07 and reduced the charring to 6.5 % of the recovered EC amounts. The mean Fraction Modern (F14C) over all seasons was 0.85 ± 0.17 for TC, 0.61 ± 0.17 and 0.66 ± 0.16 for EC before and after correction with the thermal-desorption model, respectively, and 0.81 ± 0.20 for WSOC.

  • Open Access

    Comment on egusphere-2022-625

    by Martin Rauber, Gary Salazar, Karl Espen Yttri, Sönke Szidat

    Radiocarbon (14C) analysis of carbonaceous aerosols is used for source apportionment, separating the carbon content into fossil vs. non-fossil origin, and is particularly useful when applied to subfractions of total carbon (TC), i.e., elemental carbon (EC), organic carbon (OC), water-soluble OC (WSOC), and water-insoluble OC (WINSOC). However, this requires an unbiased physical separation of these fractions, which is difficult to achieve. Separation of EC from OC using thermal-optical analysis (TOA) can cause EC loss during the OC removal step and form artificial EC from pyrolysis of OC (i.e., so-called charring), both distorting the 14C analysis of EC. Previous work showed that water extraction reduces charring. Here, we apply a new combination of a WSOC extraction and 14C analysis method with an optimised OC/EC separation that is coupled with a novel approach of thermal-desorption modelling for compensation of EC losses. As water-soluble components promote the formation of pyrolytic carbon, water extraction was used to minimise the charring artefact of EC, and the eluate subjected to chemical wet oxidation to CO2 before direct 14C analysis in a gas-accepting accelerator mass spectrometer (AMS). This approach was applied to 13 aerosol filter samples collected at the Arctic Zeppelin Observatory (Svalbard) in 2017 and 2018, covering all seasons, which bear challenges for a simplified 14C source apportionment due to their low loading and the large portion of pyrolysable species. Our approach provided a mean EC yield of 0.87 ± 0.07 and reduced the charring to 6.5 % of the recovered EC amounts. The mean Fraction Modern (F14C) over all seasons was 0.85 ± 0.17 for TC, 0.61 ± 0.17 and 0.66 ± 0.16 for EC before and after correction with the thermal-desorption model, respectively, and 0.81 ± 0.20 for WSOC.

  • Open Access

    Comment on egusphere-2022-625

    by Martin Rauber, Gary Salazar, Karl Espen Yttri, Sönke Szidat

    Radiocarbon (14C) analysis of carbonaceous aerosols is used for source apportionment, separating the carbon content into fossil vs. non-fossil origin, and is particularly useful when applied to subfractions of total carbon (TC), i.e., elemental carbon (EC), organic carbon (OC), water-soluble OC (WSOC), and water-insoluble OC (WINSOC). However, this requires an unbiased physical separation of these fractions, which is difficult to achieve. Separation of EC from OC using thermal-optical analysis (TOA) can cause EC loss during the OC removal step and form artificial EC from pyrolysis of OC (i.e., so-called charring), both distorting the 14C analysis of EC. Previous work showed that water extraction reduces charring. Here, we apply a new combination of a WSOC extraction and 14C analysis method with an optimised OC/EC separation that is coupled with a novel approach of thermal-desorption modelling for compensation of EC losses. As water-soluble components promote the formation of pyrolytic carbon, water extraction was used to minimise the charring artefact of EC, and the eluate subjected to chemical wet oxidation to CO2 before direct 14C analysis in a gas-accepting accelerator mass spectrometer (AMS). This approach was applied to 13 aerosol filter samples collected at the Arctic Zeppelin Observatory (Svalbard) in 2017 and 2018, covering all seasons, which bear challenges for a simplified 14C source apportionment due to their low loading and the large portion of pyrolysable species. Our approach provided a mean EC yield of 0.87 ± 0.07 and reduced the charring to 6.5 % of the recovered EC amounts. The mean Fraction Modern (F14C) over all seasons was 0.85 ± 0.17 for TC, 0.61 ± 0.17 and 0.66 ± 0.16 for EC before and after correction with the thermal-desorption model, respectively, and 0.81 ± 0.20 for WSOC.

  • Open Access

    An Optimised OC/EC Fraction Separation Method for Radiocarbon Source Apportionment Applied to Low-Loaded Arctic Aerosol Filters

    by Martin Rauber, Gary Salazar, Karl Espen Yttri, Sönke Szidat

    Radiocarbon (14C) analysis of carbonaceous aerosols is used for source apportionment, separating the carbon content into fossil vs. non-fossil origin, and is particularly useful when applied to subfractions of total carbon (TC), i.e., elemental carbon (EC), organic carbon (OC), water-soluble OC (WSOC), and water-insoluble OC (WINSOC). However, this requires an unbiased physical separation of these fractions, which is difficult to achieve. Separation of EC from OC using thermal-optical analysis (TOA) can cause EC loss during the OC removal step and form artificial EC from pyrolysis of OC (i.e., so-called charring), both distorting the 14C analysis of EC. Previous work showed that water extraction reduces charring. Here, we apply a new combination of a WSOC extraction and 14C analysis method with an optimised OC/EC separation that is coupled with a novel approach of thermal-desorption modelling for compensation of EC losses. As water-soluble components promote the formation of pyrolytic carbon, water extraction was used to minimise the charring artefact of EC, and the eluate subjected to chemical wet oxidation to CO2 before direct 14C analysis in a gas-accepting accelerator mass spectrometer (AMS). This approach was applied to 13 aerosol filter samples collected at the Arctic Zeppelin Observatory (Svalbard) in 2017 and 2018, covering all seasons, which bear challenges for a simplified 14C source apportionment due to their low loading and the large portion of pyrolysable species. Our approach provided a mean EC yield of 0.87 ± 0.07 and reduced the charring to 6.5 % of the recovered EC amounts. The mean Fraction Modern (F14C) over all seasons was 0.85 ± 0.17 for TC, 0.61 ± 0.17 and 0.66 ± 0.16 for EC before and after correction with the thermal-desorption model, respectively, and 0.81 ± 0.20 for WSOC.