Jiren Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiren Zhang has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Jianqing Bu
State Key Laboratory of Mechanical Behavior and System Safety of Traffic Engineering Structures, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
4 shared publications - Zhouquan Feng
Hunan University
4 shared publications Xugang Hua
3 shared publicationsZhengqing Chen
3 shared publications- Wenlong Cao
School of Civil Engineering, Shijiazhuang Tiedao University, Shijiazhuang, China
2 shared publications Yafei Wang
2 shared publications
Latest Publications
- 6 December 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 310
Model updating of local pipelines via enhanced adaptive genetic algorithm
- 6 December 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 310
Model updating of local pipelines via enhanced adaptive genetic algorithm
- Open Access
- 1 January 2025
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2025 (1)
Bayesian Approach for Damping Identification of Stay Cables Under Vortex‐Induced Vibrations
As the span of cable‐stayed bridges increases, so does the length of stay cables, making cable vortex‐induced vibrations (VIVs) more prominent. This is particularly evident in higher‐order multimodal VIVs, which are closely linked to the damping characteristics of the cables. Traditional operational modal analysis (OMA) methods often fail under VIV conditions due to the inadequacy of the white noise excitation assumption. Moreover, potential influences from ambient vibrations and noise contamination introduce further uncertainties into the identification results. This paper addresses these challenges by proposing a novel Bayesian method for damping identification from measured VIV responses. The proposed method, based on a single‐degree‐of‐freedom (SDOF) vortex‐induced force model and the statistical properties of the power spectral density of the VIV measurements, aims to enhance the accuracy of damping identification while effectively quantifying uncertainties of identified results. The efficacy of the proposed method is validated through simulated scenarios and applied to the field test of a stay cable in the Sutong Bridge. The results not only demonstrate the method’s high accuracy in identifying damping ratios under VIV but also highlight its capability to effectively quantify the uncertainties in the identification results. This method offers a reliable approach for investigating the evolution of damping in VIV of stay cables and enhances the understanding of the mechanisms behind higher‐order multimodal VIV.
- 1 January 2025
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2025 (1)
Open AccessBayesian Approach for Damping Identification of Stay Cables Under Vortex‐Induced Vibrations
As the span of cable‐stayed bridges increases, so does the length of stay cables, making cable vortex‐induced vibrations (VIVs) more prominent. This is particularly evident in higher‐order multimodal VIVs, which are closely linked to the damping characteristics of the cables. Traditional operational modal analysis (OMA) methods often fail under VIV conditions due to the inadequacy of the white noise excitation assumption. Moreover, potential influences from ambient vibrations and noise contamination introduce further uncertainties into the identification results. This paper addresses these challenges by proposing a novel Bayesian method for damping identification from measured VIV responses. The proposed method, based on a single‐degree‐of‐freedom (SDOF) vortex‐induced force model and the statistical properties of the power spectral density of the VIV measurements, aims to enhance the accuracy of damping identification while effectively quantifying uncertainties of identified results. The efficacy of the proposed method is validated through simulated scenarios and applied to the field test of a stay cable in the Sutong Bridge. The results not only demonstrate the method’s high accuracy in identifying damping ratios under VIV but also highlight its capability to effectively quantify the uncertainties in the identification results. This method offers a reliable approach for investigating the evolution of damping in VIV of stay cables and enhances the understanding of the mechanisms behind higher‐order multimodal VIV.
- Open Access
- 1 January 2024
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2024 (1)
Bayesian Spectral Decomposition for Efficient Modal Identification Using Ambient Vibration
Modal parameter identification via ambient vibration is popular but faces challenges from uncertainties due to unknown inputs and low signal‐to‐noise ratio. Bayesian methods are gaining increasing attention for operational modal identification due to their ability to quantify uncertainties. However, improvements in computational efficiency are needed, particularly when addressing numerous modes and degrees of freedom. To address this challenge, this study proposes an innovative approach, termed the “Bayesian spectral decomposition” method (BSD), employing the decompose‐and‐conquer strategy. This novel method, operating within the frequency domain, identifies each mode individually by exploiting their inherent separated modal characteristics. For each mode, the response spectrum matrix undergoes an eigenvalue decomposition, yielding crucial eigenvalues (incorporating frequency and damping information) and eigenvectors (containing mode shape information). Subsequently, statistical properties of the eigenvalues and eigenvectors are utilized to establish likelihood functions for Bayesian parameter identification. By combining prior information, the posterior probability distribution functions of modal parameters are derived. The optimal solution is then obtained by resolving the maximum posterior probability distribution function problem. To further quantify the uncertainty of modal parameters, Gaussian distributions are employed to approximate the posterior probability distribution functions. The adoption of the decomposition approach circumvents the joint identification of all modal parameters, substantially reducing the parameter dimensions for optimization. Consequently, this strategy leads to decreased computational complexity and significantly improved computational stability. The effectiveness of the BSD is confirmed through simulated data generated from an 8‐story shear building as well as measured data collected from both an experimental shear frame and the Canton Tower. The results demonstrate that the proposed method achieves high accuracy in identifying modal parameters, greatly improves computational efficiency, and effectively quantifies the uncertainties in modal parameters.
- 1 January 2024
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2024 (1)
Open AccessBayesian Spectral Decomposition for Efficient Modal Identification Using Ambient Vibration
Modal parameter identification via ambient vibration is popular but faces challenges from uncertainties due to unknown inputs and low signal‐to‐noise ratio. Bayesian methods are gaining increasing attention for operational modal identification due to their ability to quantify uncertainties. However, improvements in computational efficiency are needed, particularly when addressing numerous modes and degrees of freedom. To address this challenge, this study proposes an innovative approach, termed the “Bayesian spectral decomposition” method (BSD), employing the decompose‐and‐conquer strategy. This novel method, operating within the frequency domain, identifies each mode individually by exploiting their inherent separated modal characteristics. For each mode, the response spectrum matrix undergoes an eigenvalue decomposition, yielding crucial eigenvalues (incorporating frequency and damping information) and eigenvectors (containing mode shape information). Subsequently, statistical properties of the eigenvalues and eigenvectors are utilized to establish likelihood functions for Bayesian parameter identification. By combining prior information, the posterior probability distribution functions of modal parameters are derived. The optimal solution is then obtained by resolving the maximum posterior probability distribution function problem. To further quantify the uncertainty of modal parameters, Gaussian distributions are employed to approximate the posterior probability distribution functions. The adoption of the decomposition approach circumvents the joint identification of all modal parameters, substantially reducing the parameter dimensions for optimization. Consequently, this strategy leads to decreased computational complexity and significantly improved computational stability. The effectiveness of the BSD is confirmed through simulated data generated from an 8‐story shear building as well as measured data collected from both an experimental shear frame and the Canton Tower. The results demonstrate that the proposed method achieves high accuracy in identifying modal parameters, greatly improves computational efficiency, and effectively quantifies the uncertainties in modal parameters.
- Open Access
- 1 January 2024
- Published by Wiley in Shock and Vibration
- Vol. 2024 (1)
Driving Comfort Analysis Method of Highway Bridge Based on Human‐Vehicle‐Bridge Interaction
Research on evaluating highway bridge performance through vehicle‐bridge interaction (VBI) analysis has made significant advancements. However, when assessing driving comfort, using vehicle acceleration instead of human acceleration poses challenges in accurately representing comfort. First, the paper proposes a finite element analysis method for human‐vehicle‐bridge spatial interactions (HVBSIs). Then, the importance of wheel path roughness difference is explored when assessing driving comfort. Furthermore, a new method for evaluating driving comfort that includes human and vehicle vibration responses has been proposed, and a simulation example of the steel‐concrete composite beam bridge (SCCBB) is used to verify the effectiveness of the proposed method. The results demonstrate that the HVBSI analysis method effectively simulates the interconnected vibrations of the human body, the spatial vehicle model, and the three‐dimensional (3D) bridge model. Differences in wheel path roughness significantly impact the roll vehicle vibration responses, which are crucial in driving comfort analysis. The driver’s body vibration response is essential for evaluating driving comfort, and its inclusion leads to increased comfort indices values. In comparison to traditional methods, the overall vibration total value (OVTV) increases by a maximum of 109.04%, and the level of weighted vibration (Leq) increases by a maximum of 6.74%. This leads to an upgrade from grade IV to grade V in terms of comfort level, indicating a reduced comfort.
- 1 January 2024
- Published by Wiley in Shock and Vibration
- Vol. 2024 (1)
Open AccessDriving Comfort Analysis Method of Highway Bridge Based on Human‐Vehicle‐Bridge Interaction
Research on evaluating highway bridge performance through vehicle‐bridge interaction (VBI) analysis has made significant advancements. However, when assessing driving comfort, using vehicle acceleration instead of human acceleration poses challenges in accurately representing comfort. First, the paper proposes a finite element analysis method for human‐vehicle‐bridge spatial interactions (HVBSIs). Then, the importance of wheel path roughness difference is explored when assessing driving comfort. Furthermore, a new method for evaluating driving comfort that includes human and vehicle vibration responses has been proposed, and a simulation example of the steel‐concrete composite beam bridge (SCCBB) is used to verify the effectiveness of the proposed method. The results demonstrate that the HVBSI analysis method effectively simulates the interconnected vibrations of the human body, the spatial vehicle model, and the three‐dimensional (3D) bridge model. Differences in wheel path roughness significantly impact the roll vehicle vibration responses, which are crucial in driving comfort analysis. The driver’s body vibration response is essential for evaluating driving comfort, and its inclusion leads to increased comfort indices values. In comparison to traditional methods, the overall vibration total value (OVTV) increases by a maximum of 109.04%, and the level of weighted vibration (Leq) increases by a maximum of 6.74%. This leads to an upgrade from grade IV to grade V in terms of comfort level, indicating a reduced comfort.
- Open Access
- 13 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (16) , 9207
Experimental Study on the Damage Mechanism of Reinforced Concrete Beams Based on Acoustic Emission Technique
The purpose of this paper is to investigate the developmental process of internal damage in prestressed concrete beams under static loading conditions. We conducted static loading tests on two prestressed reinforced concrete beams and one ordinary reinforced concrete beam. Acoustic emission (AE) technology was employed to dynamically monitor the entire process of the test beams simultaneously. The energy and ring count AE characteristic parameters were studied, and the frequency domain characteristics of acoustic emission signals from three test beams were analyzed. The actual failure process of the test beams was compared with the AE characteristic parameters and the waveform frequency distribution. Furthermore, the corresponding relationships between the actual failure process and the AE characteristic parameters were analyzed. Additionally, the frequency distribution of waveforms was examined. The obtained data, including deflection, strain, and prestress variation within the beams, were combined with theoretical calculations to explore the damage development law of simply supported reinforced concrete beams during the entire failure process. Comparative studies revealed a strong correlation between the actual failure processes of the three test beams and the AE characteristic parameters as well as the waveform frequency distribution. The strain variation trend of the ordinary reinforced concrete beam closely matched the AE signal characteristics, with the critical load often occurring at around 40% of the ultimate load. The strain and deflection variations of the prestressed reinforced concrete beams exhibited a robust correspondence with the AE signal characteristics. The critical load typically manifested at approximately 80% of the ultimate load. The ultimate load of the prestressed reinforced concrete beams decreased by approximately 20% under cyclic loading conditions compared to hierarchical loading.
- 13 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (16) , 9207
Open AccessExperimental Study on the Damage Mechanism of Reinforced Concrete Beams Based on Acoustic Emission Technique
The purpose of this paper is to investigate the developmental process of internal damage in prestressed concrete beams under static loading conditions. We conducted static loading tests on two prestressed reinforced concrete beams and one ordinary reinforced concrete beam. Acoustic emission (AE) technology was employed to dynamically monitor the entire process of the test beams simultaneously. The energy and ring count AE characteristic parameters were studied, and the frequency domain characteristics of acoustic emission signals from three test beams were analyzed. The actual failure process of the test beams was compared with the AE characteristic parameters and the waveform frequency distribution. Furthermore, the corresponding relationships between the actual failure process and the AE characteristic parameters were analyzed. Additionally, the frequency distribution of waveforms was examined. The obtained data, including deflection, strain, and prestress variation within the beams, were combined with theoretical calculations to explore the damage development law of simply supported reinforced concrete beams during the entire failure process. Comparative studies revealed a strong correlation between the actual failure processes of the three test beams and the AE characteristic parameters as well as the waveform frequency distribution. The strain variation trend of the ordinary reinforced concrete beam closely matched the AE signal characteristics, with the critical load often occurring at around 40% of the ultimate load. The strain and deflection variations of the prestressed reinforced concrete beams exhibited a robust correspondence with the AE signal characteristics. The critical load typically manifested at approximately 80% of the ultimate load. The ultimate load of the prestressed reinforced concrete beams decreased by approximately 20% under cyclic loading conditions compared to hierarchical loading.
- Open Access
Theoretical and Numerical Investigation of Damage Sensitivity of Steel–Concrete Composite Beam Bridges
To investigate the sensitivity of the overall mechanical performance of steel–concrete composite beam bridges (SCCBBs) to different types of damage, this paper proposes a method of analyzing the sensitivity of SCCBBs to damage based on the extremely randomized trees (ET) algorithm in machine learning. A steel–concrete composite continuous beam bridge was used as the engineering basis, and the finite element method was used to analyze the changes in the static and dynamic response of the bridge caused by seven types of damage. The proposed SCCBB damage sensitivity analysis theory was used to explore the sensitivity factors of the seven types of damage. The results show that microcracks in steel beams have the most significant impact on the mechanical performance sensitivity of SCCBBs, followed by the concrete slab stiffness degradation and bridge deck breakage. The sensitivity of the damage caused by transverse diaphragms and bridge pier stiffness degradation is relatively low, while the sensitivity of stud fractures and bearing damage is minimal. The impact factors of damage sensitivity were 0.51, 0.19, 0.13, 0.08, 0.05, 0.03 and 0.01. This research can provide a reference for the damage classification of SCCBBs with multiple damage interlacing.
Open AccessTheoretical and Numerical Investigation of Damage Sensitivity of Steel–Concrete Composite Beam Bridges
To investigate the sensitivity of the overall mechanical performance of steel–concrete composite beam bridges (SCCBBs) to different types of damage, this paper proposes a method of analyzing the sensitivity of SCCBBs to damage based on the extremely randomized trees (ET) algorithm in machine learning. A steel–concrete composite continuous beam bridge was used as the engineering basis, and the finite element method was used to analyze the changes in the static and dynamic response of the bridge caused by seven types of damage. The proposed SCCBB damage sensitivity analysis theory was used to explore the sensitivity factors of the seven types of damage. The results show that microcracks in steel beams have the most significant impact on the mechanical performance sensitivity of SCCBBs, followed by the concrete slab stiffness degradation and bridge deck breakage. The sensitivity of the damage caused by transverse diaphragms and bridge pier stiffness degradation is relatively low, while the sensitivity of stud fractures and bearing damage is minimal. The impact factors of damage sensitivity were 0.51, 0.19, 0.13, 0.08, 0.05, 0.03 and 0.01. This research can provide a reference for the damage classification of SCCBBs with multiple damage interlacing.
- Open Access
Probabilistic Structural Model Updating with Modal Flexibility Using a Modified Firefly Algorithm
Structural model updating is one of the most important steps in structural health monitoring, which can achieve high-precision matching between finite element models and actual engineering structures. In this study, a Bayesian model updating method with modal flexibility was presented, where a modified heuristic optimization algorithm named modified Nelder–Mead firefly algorithm (m-NMFA) was proposed to find the most probable values (MPV) of model parameters for the maximum a posteriori probability (MAP) estimate. The proposed m-NMFA was compared to the original firefly algorithm (FA), the genetic algorithm (GA), and the particle swarm algorithm (PSO) through the numerical illustrative examples of 18 benchmark functions and a twelve-story shear frame model. Then, a six-story shear frame model test was performed to identify the inter-story stiffness of the structure in the original and the damage states, respectively. By comparing the two, the position and extent of damage were accurately found and quantified in a probabilistic manner. In terms of optimization, the proposed m-NMFA was powerful to find the MPVs much faster and more accurately. In the incomplete measurement case, only the m-NMFA achieved target damage identification results. The proposed Bayesian model updating method has the advantages of high precision, fast convergence, and strong robustness in MPV finding and the ability of parameter uncertainty quantification.
Open AccessProbabilistic Structural Model Updating with Modal Flexibility Using a Modified Firefly Algorithm
Structural model updating is one of the most important steps in structural health monitoring, which can achieve high-precision matching between finite element models and actual engineering structures. In this study, a Bayesian model updating method with modal flexibility was presented, where a modified heuristic optimization algorithm named modified Nelder–Mead firefly algorithm (m-NMFA) was proposed to find the most probable values (MPV) of model parameters for the maximum a posteriori probability (MAP) estimate. The proposed m-NMFA was compared to the original firefly algorithm (FA), the genetic algorithm (GA), and the particle swarm algorithm (PSO) through the numerical illustrative examples of 18 benchmark functions and a twelve-story shear frame model. Then, a six-story shear frame model test was performed to identify the inter-story stiffness of the structure in the original and the damage states, respectively. By comparing the two, the position and extent of damage were accurately found and quantified in a probabilistic manner. In terms of optimization, the proposed m-NMFA was powerful to find the MPVs much faster and more accurately. In the incomplete measurement case, only the m-NMFA achieved target damage identification results. The proposed Bayesian model updating method has the advantages of high precision, fast convergence, and strong robustness in MPV finding and the ability of parameter uncertainty quantification.
- Open Access
- 28 August 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-12
Stiffness Calculation for Negative Moment Region of Steel-Concrete Composite Beams considering the Influence of Cracking and Interface Slip
Concrete cracking and interface slip decrease the bending stiffness of steel-concrete composite beams (SCCBs) in the negative moment region. To evaluate this decrease in the stiffness of SCCBs, a static differential equation is used to derive analytical expressions of interface slip and deflection. Based on the static load test results for SCCBs, the influence of concrete cracking and interface slip on the stiffness is analyzed. A linear stiffness reduction method is proposed for calculating the stiffness of SCCBs in the negative moment region after the concrete undergoes cracking. The proposed method can be used in engineering applications as it enables the facile and accurate calculation of the deflection and slip and the changes in stiffness of SCCBs in the negative moment region. The method can also be used for predicting and evaluating performance in the field of structural design.
- 28 August 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-12
Open AccessStiffness Calculation for Negative Moment Region of Steel-Concrete Composite Beams considering the Influence of Cracking and Interface Slip
Concrete cracking and interface slip decrease the bending stiffness of steel-concrete composite beams (SCCBs) in the negative moment region. To evaluate this decrease in the stiffness of SCCBs, a static differential equation is used to derive analytical expressions of interface slip and deflection. Based on the static load test results for SCCBs, the influence of concrete cracking and interface slip on the stiffness is analyzed. A linear stiffness reduction method is proposed for calculating the stiffness of SCCBs in the negative moment region after the concrete undergoes cracking. The proposed method can be used in engineering applications as it enables the facile and accurate calculation of the deflection and slip and the changes in stiffness of SCCBs in the negative moment region. The method can also be used for predicting and evaluating performance in the field of structural design.