QWQingxiang Wang

Qingxiang Wang

*This is an algorithmically generated author record based on publicly available information.

Qingxiang Wang has a total of 26 co-authors. Here are the top co-authors by number of shared publications:

  • Hua Jiao

    School of Materials Science and Engineering, Xi’an University of Technology, Xi’an, People’s Republic of China

    2 shared publications
  • Jia Qinggong

    Xi’an Juneng Medical Engineering Technology Co., Ltd., Xi’an, People’s Republic of China

    2 shared publications
  • Jia Wang

    School of Materials Science and Engineering, Xi’an University of Technology, Xi’an, People’s Republic of China

    2 shared publications
  • Kang Zhao

    School of Materials Science and Engineering, Xi’an University of Technology, Xi’an, People’s Republic of China

    2 shared publications
  • Rui Hu

    State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China

    2 shared publications
  • Shaoqiang Li

    Sino-Euro Materials Technologies of Xi’an Co., Ltd., Xi’an 710018, China

    2 shared publications

Latest Publications

  • Effect of CFs content on arc erosion behavior of Ag–CFs contact materials

    by Chong Fu, Song Chen, Ruikang Xiao, Yuxin Liu, Yanli Chang, Qingxiang Wang

    1. Ag-based contact materials are renowned for their superior electrical and thermal conductivity, resistance to arc erosion, and anti-welding properties[1–4]. They have become the preferred choice...


  • Open Access

    Insights into Optimizing Heat Treatment for Hot Isostatic Pressing of Ti-48Al-3Nb-1.5Ta Alloy Powder

    by Zhenbo Zuo, Rui Hu, Shaoqiang Li, Chengpeng Liu, Qingxiang Wang, Xiangyu Gao, Yunjin Lai, Xian Luo, Cheng Luo, Zonghong Qu, et al.

    In this study, various characterization techniques were utilized to investigate the effects of heat treatments on the microstructure and mechanical properties of Ti-48Al-3Nb-1.5Ta (at. %) alloy prepared by the supreme-speed plasma rotating electrode process and hot isostatic pressing. By comparing the microstructures of the alloy under different heat treatments conditions, it was found that the nearly lamellar structure with a size of about 145 μm is formed by a simple heat treatment (1400 °C/10 min, FC to 1300 °C, AC, 850 °C/3 h/FC). Under this heat treatment condition, the alloy exhibited satisfied mechanical properties, with a tensile fracture strain of 1.2% at room temperature and a tensile fracture strain of 7.5% at 750 °C. No fracture occurred after 225 h when creeping at 750 °C/250 MPa. Ta inhibited the growth of lamellae and the expansion of pores, thereby improving creep performance. In summary, the TiAl alloy with satisfied performance was obtained through a simple heat treatment process, which provides a significant idea for engineering application.

  • Open Access

    Effects of Thermal Exposure on the Microstructure and Mechanical Properties of a Ti–48Al–3Nb–1.5Ta Alloy via Powder Hot Isostatic Pressing

    by Zhenbo Zuo, Rui Hu, Qingxiang Wang, Zitong Gao, Xian Luo, Yunjin Lai, Sa Xue, Min Xiang, Xiaohao Zhao, Shaoqiang Li

    Research on how thermal exposure affects the microstructure and mechanical properties of the Ti–48Al–3Nb–1.5Ta (at. %) alloy, which is prepared via powder hot isostatic pressing (P–HIP), is essential since this low-density alloy shows promise for use in high-temperature applications, particularly for aero-engines, which require long-term stable service. In this study, a P–HIP Ti–48Al–3Nb–1.5Ta (at. %) alloy was exposed to high temperatures for long durations. The phase, microstructure and mechanical properties of the P–HIP Ti–48Al–3Nb–1.5Ta alloy after thermal exposure under different conditions were analyzed using XRD, SEM, EBSD, EPMA, TEM, nanomechanical testing and tensile testing. The surface scale is composed of oxides and nitrides, primarily Al2O3, TiO2, and TiN, among which Al2O3 is preferentially generated and then covered by rapidly growing TiO2 as the thermal exposure duration increases. The nitrides appear later than the oxides and exist between the oxides and the substrate. With increasing exposure temperature and duration, the surface scale becomes more continuous, TiO2 particles grow larger, and the oxide layer thickens or even falls off. The addition of Ta and Nb can improve the oxidation resistance because Ta5+ and Nb5+ replace Ti4+ in the rutile lattice and weaken O diffusion. Compared with the P–HIP Ti–48Al–3Nb–1.5Ta alloy, after thermal exposure, the grain size does not increase significantly, and the γ phase increases slightly (by less than 3%) with the decomposition of the α2 phase. With increasing thermal exposure duration, the γ phase exhibits discontinuous coarsening (DC). Compared with the P–HIP Ti–48Al–3Nb–1.5Ta alloy, the hardness increases by about 2 GPa, the tensile strength increases by more than 50 MPa, and the fracture strain decreases by about 0.1% after thermal exposure. When the depth extends from the edge of the thermally exposed specimens, the hardness decreases overall.


  • Open Access

    Effect of HA Content on Microstructure and Properties of Ti-27Nb-17Ta-8Zr/HA Composite

    by Qinggong Jia, Shuhua Liang, Qingxiang Wang

    In this paper, Ti-27Nb-17Ta-8Zr/HA series composite materials were prepared by spark plasma sintering (SPS) technology. The medical titanium alloy (Ti-27Nb-17Ta-8Zr) with good mechanical properties, wear resistance, and corrosion resistance was combined with the hydroxyapatite (HA) bioactive ceramic with high biological activity and bone-binding ability. Moreover, the density, microstructure evolution, metal/ceramic reaction, mechanical behavior, in vitro bioactivity, and influencing mechanisms of composite materials with different HA contents were studied. The research results indicate that all biological composite materials are composed of β-Ti solution, α-Ti, and ceramic phases (Ti2O, CaTiO3, CaO, TixPy). With the increase of HA content, the compressive strength and yield strength of the composite material show a trend of first increasing, then decreasing, and then slowly increasing. After soaking in SBF artificial simulated body fluid for 5 days, the deposition of elements such as Ca and P on the surface significantly increased, while elements such as Ti, Nb, Ta, and Zr were evenly distributed in the matrix, demonstrating good in vitro mineralization ability and facilitating the attachment and growth of osteoblasts.


  • Open Access

    Effect of powders on microstructure and performance of inconel 718 alloy prepared by SPS

    by Jia Qinggong, Wang Qingxiang, Liang Shuhua

    In this paper, 15–53 μm spherical powders obtained by plasma rotating electrode (PREP) and argon atomization (VIGA) were used to prepare the Inconel 718 alloy through spark plasma sintering(SPS), and then the sintered alloy was treated by solid solution and aging heat treatment. The effect of different powders on the microstructure and properties of Inconel 718 alloy as sintered and heat treated was studied. The results show that high density Inconel 718 alloy can be obtained by SPS technology, and the original particle boundary of powder can be reduced, and the original particle boundary of PREP is less. According to the densification process of spherical powder during SPS process, the change law of powder microstructure in rapid sintering is established.