Dianbo Ruan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dianbo Ruan has a total of 138 co-authors. Here are the top co-authors by number of shared publications:
- Zhijun Qiao
Ningbo University
10 shared publications Yuzuo Wang
6 shared publicationsYanyan Li
Zhejiang Key Laboratory of Special Electrochemical Energy Storage Technologies
5 shared publicationsZhijun Qiao
Advanced Energy Storage Technology and Equipment Research Institute, Ningbo University, Ningbo, Zhejiang 315211, China
5 shared publications- Jianfei Tu
Ningbo University
4 shared publications - Ping Jiang
Institute of Advanced Energy Storage Technology and Equipment, Ningbo University, Ningbo 315201, China
4 shared publications
Latest Publications
- 19 August 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (16) , 160507
N/O-Codoped Hierarchically Porous Carbon Enables High-Energy-Density and Self-Discharge-Resistant Zinc-Ion Hybrid Supercapacitors
Aqueous zinc-ion hybrid supercapacitors (ZIHCs) with conventional activated carbon cathodes mainly rely on electric-double-layer storage, limiting energy density and electrochemical performance. Although heteroatom doping can tailor electronic structures, introduce active sites, and enhance pseudocapacitance, it often intensifies self-discharge. Herein, DFT calculations show that N/O codoping synergistically regulates the local electronic structure and magnetic-moment distribution of activated carbon, enhances electron localization around N–O–C configurations, and lowers Zn 2+ adsorption energy, thereby strengthening Zn-ion adsorption and charge storage. It also reduces the diffusion barrier of hydrated Zn(H 2 O) 6 2+ ions in carbon slit pores, promoting rapid ion transport. Guided by this mechanism, an N/O-codoped hierarchical porous carbon cathode was prepared from banana-peel biomass using melamine as an external nitrogen source. The optimized cathode combines accessible pores, abundant active sites, and favorable ion-transport kinetics, enabling high-capacity storage with suppressed self-discharge. The assembled ZIHC delivers 540.5 F g −1 at 0.1 A g −1 and 160 Wh kg −1 at 192.18 W kg −1 , retains 85.5% capacity after 5000 cycles, and maintains 93.7% voltage retention during the 2–12 h rest period. This work offers a rational route toward high-energy, fast-transport, and low-self-discharge aqueous ZIHCs.
- 19 August 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (16) , 160507
N/O-Codoped Hierarchically Porous Carbon Enables High-Energy-Density and Self-Discharge-Resistant Zinc-Ion Hybrid Supercapacitors
Aqueous zinc-ion hybrid supercapacitors (ZIHCs) with conventional activated carbon cathodes mainly rely on electric-double-layer storage, limiting energy density and electrochemical performance. Although heteroatom doping can tailor electronic structures, introduce active sites, and enhance pseudocapacitance, it often intensifies self-discharge. Herein, DFT calculations show that N/O codoping synergistically regulates the local electronic structure and magnetic-moment distribution of activated carbon, enhances electron localization around N–O–C configurations, and lowers Zn 2+ adsorption energy, thereby strengthening Zn-ion adsorption and charge storage. It also reduces the diffusion barrier of hydrated Zn(H 2 O) 6 2+ ions in carbon slit pores, promoting rapid ion transport. Guided by this mechanism, an N/O-codoped hierarchical porous carbon cathode was prepared from banana-peel biomass using melamine as an external nitrogen source. The optimized cathode combines accessible pores, abundant active sites, and favorable ion-transport kinetics, enabling high-capacity storage with suppressed self-discharge. The assembled ZIHC delivers 540.5 F g −1 at 0.1 A g −1 and 160 Wh kg −1 at 192.18 W kg −1 , retains 85.5% capacity after 5000 cycles, and maintains 93.7% voltage retention during the 2–12 h rest period. This work offers a rational route toward high-energy, fast-transport, and low-self-discharge aqueous ZIHCs.
- Open Access
- 25 July 2026
- Published by Elsevier in SSRN Electronic Journal
Estimating the State of Health of Lithium-Ion Batteries Using Relaxation Voltage Data Based on the TCN-Transformer Model
Estimating the state of health (SOH) of lithium-ion batteries based on relaxation voltage data has become one of the current research hotspots in battery state assessment. However, relaxation voltage features are susceptible to noise interference and feature redundancy. To address these issues, this paper proposes a lithium-ion battery SOH estimation method based on a TCN-Transformer-CrossAttention architecture. First, five health features, namely the Hausdorff distance (HD), final relaxation voltage value (FRV), relaxation voltage curve area (CA), relaxation voltage variance (VV), and relaxation voltage variation amplitude (VA), are extracted from relaxation voltage curves under different charging rates and SOC conditions. These features are used to characterize polarization recovery behavior, curve morphology evolution, and voltage fluctuation characteristics during battery aging. Subsequently, a hybrid TCN-Transformer-CrossAttention model is constructed. The TCN is employed to extract local degradation dynamic features, the Transformer is used to capture long-term temporal dependencies, and the crossattention mechanism adaptively fuses local features with global degradation information. Experimental results demonstrate that the proposed method achieves high SOH estimation accuracy under different SOC conditions. Moreover, the relaxation voltage still contains effective aging-related information under short-window conditions, with the SOH estimation result maintaining an R² value of 0.9698. These results indicate that the proposed method can effectively shorten the data acquisition time while ensuring high estimation accuracy, thereby providing a feasible solution for the rapid online SOH assessment of lithium-ion batteries.
- 25 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEstimating the State of Health of Lithium-Ion Batteries Using Relaxation Voltage Data Based on the TCN-Transformer Model
Estimating the state of health (SOH) of lithium-ion batteries based on relaxation voltage data has become one of the current research hotspots in battery state assessment. However, relaxation voltage features are susceptible to noise interference and feature redundancy. To address these issues, this paper proposes a lithium-ion battery SOH estimation method based on a TCN-Transformer-CrossAttention architecture. First, five health features, namely the Hausdorff distance (HD), final relaxation voltage value (FRV), relaxation voltage curve area (CA), relaxation voltage variance (VV), and relaxation voltage variation amplitude (VA), are extracted from relaxation voltage curves under different charging rates and SOC conditions. These features are used to characterize polarization recovery behavior, curve morphology evolution, and voltage fluctuation characteristics during battery aging. Subsequently, a hybrid TCN-Transformer-CrossAttention model is constructed. The TCN is employed to extract local degradation dynamic features, the Transformer is used to capture long-term temporal dependencies, and the crossattention mechanism adaptively fuses local features with global degradation information. Experimental results demonstrate that the proposed method achieves high SOH estimation accuracy under different SOC conditions. Moreover, the relaxation voltage still contains effective aging-related information under short-window conditions, with the SOH estimation result maintaining an R² value of 0.9698. These results indicate that the proposed method can effectively shorten the data acquisition time while ensuring high estimation accuracy, thereby providing a feasible solution for the rapid online SOH assessment of lithium-ion batteries.
- Open Access
- 25 June 2026
- Published by Elsevier in SSRN Electronic Journal
Guar Gum-Enabled Stable SEI and Fast Na+ Transport for High-Performance Hard Carbon Anodes
Hard carbon anodes suffer from parasitic reactions, unstable interphases, and sluggish Na+ transport, which limit initial Coulombic efficiency, rate capability, and cycling stability. We hypothesize that hydroxyl-rich, highly branched guar gum (GG) can strengthen interfacial affinity with hard carbon and construct rapid Na+ transport pathways, thereby regulating SEI formation. GG was employed as a biomass-derived aqueous binder and systematically compared with sodium carboxymethyl cellulose (CMC) and polyvinylidene fluoride (PVDF) in hard carbon anodes. Electrode wettability, interfacial chemistry, SEI morphology, Na+ diffusion kinetics, charge-transfer resistance, and electrochemical performance were evaluated. The abundant hydroxyl groups and branched galactomannan structure of GG promoted strong interactions with oxygen-containing groups on hard carbon, improved electrolyte wettability, and induced a thinner, more robust, inorganic-rich SEI. Consequently, the HC-GG electrode delivered an initial Coulombic efficiency of 88.81%, a reversible capacity of 322.6 mAh g−1 at 0.1 C, 133.7 mAh g−1 at 10 C, and 93.36% capacity retention after 200 cycles at 1 C. Kinetic analyses further confirmed enhanced Na+ diffusivity, reduced charge-transfer resistance, and lower interfacial activation energy, demonstrating that GG enables simultaneous interface stabilization and rapid ion transport in high-performance hard carbon anodes.
- 25 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessGuar Gum-Enabled Stable SEI and Fast Na+ Transport for High-Performance Hard Carbon Anodes
Hard carbon anodes suffer from parasitic reactions, unstable interphases, and sluggish Na+ transport, which limit initial Coulombic efficiency, rate capability, and cycling stability. We hypothesize that hydroxyl-rich, highly branched guar gum (GG) can strengthen interfacial affinity with hard carbon and construct rapid Na+ transport pathways, thereby regulating SEI formation. GG was employed as a biomass-derived aqueous binder and systematically compared with sodium carboxymethyl cellulose (CMC) and polyvinylidene fluoride (PVDF) in hard carbon anodes. Electrode wettability, interfacial chemistry, SEI morphology, Na+ diffusion kinetics, charge-transfer resistance, and electrochemical performance were evaluated. The abundant hydroxyl groups and branched galactomannan structure of GG promoted strong interactions with oxygen-containing groups on hard carbon, improved electrolyte wettability, and induced a thinner, more robust, inorganic-rich SEI. Consequently, the HC-GG electrode delivered an initial Coulombic efficiency of 88.81%, a reversible capacity of 322.6 mAh g−1 at 0.1 C, 133.7 mAh g−1 at 10 C, and 93.36% capacity retention after 200 cycles at 1 C. Kinetic analyses further confirmed enhanced Na+ diffusivity, reduced charge-transfer resistance, and lower interfacial activation energy, demonstrating that GG enables simultaneous interface stabilization and rapid ion transport in high-performance hard carbon anodes.
- 21 May 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (10) , 100509
Modulating Oxygen Functional Groups in Activated Carbon for Dual-Ion Adsorption in High-Performance Zinc-Ion Hybrid Supercapacitors
Zinc-ion hybrid supercapacitors (ZIHCs) offer a wide range of applications for portable electronics and emergency energy storage due to their high power density and significant energy density. Nevertheless, conventional activated carbon (AC) cathodes mostly rely on electrical double-layer capacitance (EDLC), which makes it challenging to concurrently attain high energy and power output-a crucial constraint for performance advancements. To overcome this, we present a simple AC modulation strategy that enables precise control of oxygen-containing functional groups (OCFGs) with tunable type and content, while preserving AC pore structure to enhance electrochemical performance. The AC-200//aqueous ZnSO 4 //Zn device (where AC-200 denotes activated carbon treated at 200 °C, and ZnSO 4 is the zinc sulfate electrolyte) exhibits exceptional cycling stability by delivering a specific capacitance of 232.9 F g −1 at 0.1 A g −1 , achieving 104.85 Wh kg −1 at 90 W kg −1 , and maintaining 98.2% capacitance after 5000 cycles, according to electrochemical examination. Epoxy groups promote high spontaneous Zn 2+ adsorption and enhance hydrated Zn 2+ mobility in pores, according to Density Functional Theory (DFT) and Molecular Dynamics (MD) simulations. Additionally, cathode adsorption changes from co-ion to counter-ion adsorption as potential rises, with dual-ion adsorption working in concert to enhance energy storage. This work provides a straightforward and effective approach to designing high-performance ZIHC cathodes.
- 21 May 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (10) , 100509
Modulating Oxygen Functional Groups in Activated Carbon for Dual-Ion Adsorption in High-Performance Zinc-Ion Hybrid Supercapacitors
Zinc-ion hybrid supercapacitors (ZIHCs) offer a wide range of applications for portable electronics and emergency energy storage due to their high power density and significant energy density. Nevertheless, conventional activated carbon (AC) cathodes mostly rely on electrical double-layer capacitance (EDLC), which makes it challenging to concurrently attain high energy and power output-a crucial constraint for performance advancements. To overcome this, we present a simple AC modulation strategy that enables precise control of oxygen-containing functional groups (OCFGs) with tunable type and content, while preserving AC pore structure to enhance electrochemical performance. The AC-200//aqueous ZnSO 4 //Zn device (where AC-200 denotes activated carbon treated at 200 °C, and ZnSO 4 is the zinc sulfate electrolyte) exhibits exceptional cycling stability by delivering a specific capacitance of 232.9 F g −1 at 0.1 A g −1 , achieving 104.85 Wh kg −1 at 90 W kg −1 , and maintaining 98.2% capacitance after 5000 cycles, according to electrochemical examination. Epoxy groups promote high spontaneous Zn 2+ adsorption and enhance hydrated Zn 2+ mobility in pores, according to Density Functional Theory (DFT) and Molecular Dynamics (MD) simulations. Additionally, cathode adsorption changes from co-ion to counter-ion adsorption as potential rises, with dual-ion adsorption working in concert to enhance energy storage. This work provides a straightforward and effective approach to designing high-performance ZIHC cathodes.
- Open Access
- 28 March 2026
- Published by Elsevier in SSRN Electronic Journal
Machine learning enhanced electrohydrodynamic printing of heteroatom-doped composite electrodes for high-performance flexible supercapacitors
Flexible supercapacitors serve as core components for wearable electronics, whose performance depends on electrode materials. However, the enhancement of supercapacitor performance is constrained by the inherent limitations of single-component electrode materials, such as the limited specific capacitance of electric double-layer capacitive (EDLC) materials and the inferior rate capability of pseudocapacitive materials. Moreover, the effective integration of materials with different charge storage mechanisms and the precise control over the microstructure of electrodes remain critical challenges for flexible supercapacitors. To address these issues, a machine learning enhanced electrohydrodynamic printing (MLEP) strategy was proposed for the precise regulation of multi-material composite electrodes via multi-source data fusion. Activated porous carbon (APC) derived from petroleum coke was employed as the electric double-layer capacitive (EDLC) skeleton, with egg yolk-K3[Fe(CN)6] derived carbon material (YFC) doped with heteroatoms (e.g., Fe and P) incorporated to provide pseudocapacitance, and PEDOT:PSS composited to enhance the electrode-electrolyte interfacial contact. A machine learning-assisted multi-objective optimization prediction model was employed to optimize the printing parameters, enabling uniform and controllable deposition of the composite ink onto substrates. Electrochemical tests demonstrate that the APC/YFC composite electrode integrated fast EDLC response and high pseudocapacitive energy density, delivering 561.91 F g-1 at 0.5 A g-1. The APC/PEDOT:PSS composite electrode exhibited higher specific capacitance than APC alone across all current densities. Furthermore, the assembled flexible device with PVA/KOH gel electrolyte achieved 214.65 F g-1, stable performance under 0°-180° bending, and over 88% capacitance retention after 10,000 cycles. This work provides an effective pathway for the multi-material integration and controllable fabrication of electrode structures for high-performance flexible energy storage devices, showing promising potential for application in wearable electronics.
- 28 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMachine learning enhanced electrohydrodynamic printing of heteroatom-doped composite electrodes for high-performance flexible supercapacitors
Flexible supercapacitors serve as core components for wearable electronics, whose performance depends on electrode materials. However, the enhancement of supercapacitor performance is constrained by the inherent limitations of single-component electrode materials, such as the limited specific capacitance of electric double-layer capacitive (EDLC) materials and the inferior rate capability of pseudocapacitive materials. Moreover, the effective integration of materials with different charge storage mechanisms and the precise control over the microstructure of electrodes remain critical challenges for flexible supercapacitors. To address these issues, a machine learning enhanced electrohydrodynamic printing (MLEP) strategy was proposed for the precise regulation of multi-material composite electrodes via multi-source data fusion. Activated porous carbon (APC) derived from petroleum coke was employed as the electric double-layer capacitive (EDLC) skeleton, with egg yolk-K3[Fe(CN)6] derived carbon material (YFC) doped with heteroatoms (e.g., Fe and P) incorporated to provide pseudocapacitance, and PEDOT:PSS composited to enhance the electrode-electrolyte interfacial contact. A machine learning-assisted multi-objective optimization prediction model was employed to optimize the printing parameters, enabling uniform and controllable deposition of the composite ink onto substrates. Electrochemical tests demonstrate that the APC/YFC composite electrode integrated fast EDLC response and high pseudocapacitive energy density, delivering 561.91 F g-1 at 0.5 A g-1. The APC/PEDOT:PSS composite electrode exhibited higher specific capacitance than APC alone across all current densities. Furthermore, the assembled flexible device with PVA/KOH gel electrolyte achieved 214.65 F g-1, stable performance under 0°-180° bending, and over 88% capacitance retention after 10,000 cycles. This work provides an effective pathway for the multi-material integration and controllable fabrication of electrode structures for high-performance flexible energy storage devices, showing promising potential for application in wearable electronics.
- 23 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (13) , 5732-5741
Hierarchical Nanoflower-like CoS 2 Microspheres with Enhanced Sodium-Ion Storage and Printable Electrode Architectures
- 23 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (13) , 5732-5741
Hierarchical Nanoflower-like CoS 2 Microspheres with Enhanced Sodium-Ion Storage and Printable Electrode Architectures
- 6 March 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (5) , 050513
Quantitative Design of Scalable Silicon Anodes with Balanced Strain and Specific Capacity
Silicon is a promising anode material for next-generation lithium-ion batteries owing to its high theoretical capacity and natural abundance. However, its practical application is limited by the challenge of simultaneously achieving high specific capacity, low mechanical strain, and low cost. In this work, a composition-guided quantitative design strategy is proposed, in which the mass ratio of silicon to carbon nanofibres (Si/CNFs) is treated as a practical control parameter to balance capacity and volumetric expansion under realistic cost constraints. By systematically correlating component ratio, pore architecture, and electrode-level volumetric evolution, a practical CNFs content window of 14.3%–42.8% is identified, with compositions near 28.6% providing an optimal balance between active-material loading and strain buffering. A stepwise validation strategy is employed, in which nano-sized silicon is first used to elucidate the underlying mechanism, demonstrating that the optimized CNFs framework maintains structural integrity during cycling. This design concept is subsequently extended to micron-sized silicon, where the porous buffering reservoir effectively accommodates the severe volume changes of larger particles. As a demonstration of scalability, a composite electrode containing >70% micron-sized silicon delivers a reversible capacity of 1188 mAh g −1 with 83% retention after 200 cycles, while limiting irreversible volumetric strain to below 10%.
- 6 March 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (5) , 050513
Quantitative Design of Scalable Silicon Anodes with Balanced Strain and Specific Capacity
Silicon is a promising anode material for next-generation lithium-ion batteries owing to its high theoretical capacity and natural abundance. However, its practical application is limited by the challenge of simultaneously achieving high specific capacity, low mechanical strain, and low cost. In this work, a composition-guided quantitative design strategy is proposed, in which the mass ratio of silicon to carbon nanofibres (Si/CNFs) is treated as a practical control parameter to balance capacity and volumetric expansion under realistic cost constraints. By systematically correlating component ratio, pore architecture, and electrode-level volumetric evolution, a practical CNFs content window of 14.3%–42.8% is identified, with compositions near 28.6% providing an optimal balance between active-material loading and strain buffering. A stepwise validation strategy is employed, in which nano-sized silicon is first used to elucidate the underlying mechanism, demonstrating that the optimized CNFs framework maintains structural integrity during cycling. This design concept is subsequently extended to micron-sized silicon, where the porous buffering reservoir effectively accommodates the severe volume changes of larger particles. As a demonstration of scalability, a composite electrode containing >70% micron-sized silicon delivers a reversible capacity of 1188 mAh g −1 with 83% retention after 200 cycles, while limiting irreversible volumetric strain to below 10%.
- Open Access
- 7 February 2026
- Published by Elsevier in SSRN Electronic Journal
Impacts of different polymer binders on surface structure evolution and performance of TiNb₂O₇ anodes for lithium-ion batteries
The electrochemical performance of TiNb₂O₇ anodes is governed not only by intrinsic material properties but also by binder chemistry, which critically regulates electrode microstructure, interfacial stability and Li⁺ transport kinetics. Here, three representative binders—PVDF, sodium alginate and lithium alginate —are systematically compared to elucidate their multiscale effects on TNO anodes. Owing to abundant –COOR and –OH functional groups, SA forms robust hydrogen-bonded and ester-like networks with TNO particles, leading to superior slurry rheology, enhanced mechanical integrity and stronger adhesion to the current collector. These interactions promote uniform particle dispersion and stable electrode coatings. Moreover, SA effectively tailors solid electrolyte interphase formation, producing a thinner, more homogeneous and inorganic-rich SEI with reduced charge-transfer resistance, lower Warburg impedance and minimized activation energy. As a result, SA-based electrodes exhibit the highest Li⁺ diffusion coefficients and fastest kinetic recovery near the TNO phase-transition potential. Electrochemically, SA delivers outstanding rate and cycling performance, retaining 50% capacity at 20C and 91.13% after 500 cycles at 10C, far exceeding PVDF and LA. Full-cell TNO||NCM tests further confirm these advantages. This study highlights binder selection as a critical yet underappreciated design parameter and identifies aqueous SA as a sustainable, high-performance alternative to PVDF for advanced lithium-ion batteries.
- 7 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessImpacts of different polymer binders on surface structure evolution and performance of TiNb₂O₇ anodes for lithium-ion batteries
The electrochemical performance of TiNb₂O₇ anodes is governed not only by intrinsic material properties but also by binder chemistry, which critically regulates electrode microstructure, interfacial stability and Li⁺ transport kinetics. Here, three representative binders—PVDF, sodium alginate and lithium alginate —are systematically compared to elucidate their multiscale effects on TNO anodes. Owing to abundant –COOR and –OH functional groups, SA forms robust hydrogen-bonded and ester-like networks with TNO particles, leading to superior slurry rheology, enhanced mechanical integrity and stronger adhesion to the current collector. These interactions promote uniform particle dispersion and stable electrode coatings. Moreover, SA effectively tailors solid electrolyte interphase formation, producing a thinner, more homogeneous and inorganic-rich SEI with reduced charge-transfer resistance, lower Warburg impedance and minimized activation energy. As a result, SA-based electrodes exhibit the highest Li⁺ diffusion coefficients and fastest kinetic recovery near the TNO phase-transition potential. Electrochemically, SA delivers outstanding rate and cycling performance, retaining 50% capacity at 20C and 91.13% after 500 cycles at 10C, far exceeding PVDF and LA. Full-cell TNO||NCM tests further confirm these advantages. This study highlights binder selection as a critical yet underappreciated design parameter and identifies aqueous SA as a sustainable, high-performance alternative to PVDF for advanced lithium-ion batteries.
- 27 January 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (2) , 020511
Research on Self-Heating and Fast Charging Coupling Method of Lithium-Ion Batteries at Low Temperatures
Lithium-ion batteries (LIBs) are susceptible to lithium dendrite formation during fast charging at low temperatures, which poses a risk of thermal runaway. To address the challenge of fast charging LIBs in low-temperature environments, this paper proposes a self-heating and charging coupling circuit topology and a corresponding charging strategy. The paper systematically investigates the charging speed, energy conversion efficiency, and cycle life during charging processes. Using the control variable method, the effects of initial state of charge (SOC), pulse frequency, and charging current on the low-temperature charging performance of LIBs are analyzed. Furthermore, the advantages of the proposed coupling method are validated through a comparison with the preheating before charging method. The results show that the charging speed and energy conversion efficiency are negatively correlated with the initial SOC, positively correlated with the charging current, and are optimized at medium frequencies. Compared to the preheating method, the coupling method achieves a 41.8% increase in charging speed on average. Additionally, low-temperature charging cycle experiments demonstrate that the coupling method has a minimal impact on battery capacity and is less prone to polarization, with an average state of health (SOH) decrease of only 2%.
- 27 January 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (2) , 020511
Research on Self-Heating and Fast Charging Coupling Method of Lithium-Ion Batteries at Low Temperatures
Lithium-ion batteries (LIBs) are susceptible to lithium dendrite formation during fast charging at low temperatures, which poses a risk of thermal runaway. To address the challenge of fast charging LIBs in low-temperature environments, this paper proposes a self-heating and charging coupling circuit topology and a corresponding charging strategy. The paper systematically investigates the charging speed, energy conversion efficiency, and cycle life during charging processes. Using the control variable method, the effects of initial state of charge (SOC), pulse frequency, and charging current on the low-temperature charging performance of LIBs are analyzed. Furthermore, the advantages of the proposed coupling method are validated through a comparison with the preheating before charging method. The results show that the charging speed and energy conversion efficiency are negatively correlated with the initial SOC, positively correlated with the charging current, and are optimized at medium frequencies. Compared to the preheating method, the coupling method achieves a 41.8% increase in charging speed on average. Additionally, low-temperature charging cycle experiments demonstrate that the coupling method has a minimal impact on battery capacity and is less prone to polarization, with an average state of health (SOH) decrease of only 2%.
- 5 January 2026
- Published by Springer Nature in Science China Materials
- Vol. 69 (6) , 3421-3429
Solvation regulation with Janus solvates for sustainable aqueous Zn ion batteries
- 5 January 2026
- Published by Springer Nature in Science China Materials
- Vol. 69 (6) , 3421-3429
Solvation regulation with Janus solvates for sustainable aqueous Zn ion batteries