Sarah M. Severson
Research Subjects
Sarah M. Severson has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Geoffrey William Coates
Cornell University
6 shared publications - Claudio De Rosa
Dipartimento Di Scienze Chimiche Università di Napoli Federico II Napoli Italy
2 shared publications - Giovanni Talarico
Scuola Superiore Meridionale
2 shared publications - Xiao-Bing Lu
Dalian University of Technology
2 shared publications - Alexandra A. Fresh
Department of Chemistry and Chemical Biology, Baker Laboratory
1 shared publication Amy S. Pan
Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208, United States
1 shared publication
Latest Publications
- 13 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (20) , 20631-20638
Synthesis of Two-Dimensional Mechanically Interlocked Polymers at the Hundred-Gram Scale
Mechanical bonds impart unique mechanical properties to polymers. However, forming polymers with many mechanical bonds is traditionally difficult and has limited the study of mechanically interlocked materials (MIMs) to milligram-scale amounts and/or sparse incorporation of interlocked components. We recently introduced a two-dimensional polymer architecture in which every repeat unit contains a mechanical bond through a copolymerization reaction between crystalline and diffusible monomers. Here we described a significantly accelerated variant of this polymerization that enabled scaling to >100 g batches of the polymer and the preparation of >500 g of the polymer in total using equipment found in most academic research laboratories. This polymer is produced in a two-step procedure in which a tetrafunctional phenol monomer is crystallized into a mechanically interlocked structure supported by hydrogen bonding, after which polymerization occurs by reaction with dimethyldichlorosilane in hexanes, a nonsolvent for the crystal. Improved polymerization efficiency and kinetics were realized by incorporating triethylamine, which accelerates siloxane bond formation and incorporates into the monomer crystal in a single-crystal-to-single-crystal transformation. Crystallization procedures to produce monomer crystals in 50-g batches and polymerization techniques to produce the 2D MIM in 100-g batches are reported. TPE-PhO[Si(CH3)2]2 produced at these larger scales shows consistent chemical composition by X-ray photoelectron spectroscopy and NMR spectroscopy and the expected 2D morphology by scanning electron microscopy and atomic force microscopy. These findings introduce 2D MIMs as a unique yet readily accessible polymer architecture.
- 13 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (20) , 20631-20638
Synthesis of Two-Dimensional Mechanically Interlocked Polymers at the Hundred-Gram Scale
Mechanical bonds impart unique mechanical properties to polymers. However, forming polymers with many mechanical bonds is traditionally difficult and has limited the study of mechanically interlocked materials (MIMs) to milligram-scale amounts and/or sparse incorporation of interlocked components. We recently introduced a two-dimensional polymer architecture in which every repeat unit contains a mechanical bond through a copolymerization reaction between crystalline and diffusible monomers. Here we described a significantly accelerated variant of this polymerization that enabled scaling to >100 g batches of the polymer and the preparation of >500 g of the polymer in total using equipment found in most academic research laboratories. This polymer is produced in a two-step procedure in which a tetrafunctional phenol monomer is crystallized into a mechanically interlocked structure supported by hydrogen bonding, after which polymerization occurs by reaction with dimethyldichlorosilane in hexanes, a nonsolvent for the crystal. Improved polymerization efficiency and kinetics were realized by incorporating triethylamine, which accelerates siloxane bond formation and incorporates into the monomer crystal in a single-crystal-to-single-crystal transformation. Crystallization procedures to produce monomer crystals in 50-g batches and polymerization techniques to produce the 2D MIM in 100-g batches are reported. TPE-PhO[Si(CH3)2]2 produced at these larger scales shows consistent chemical composition by X-ray photoelectron spectroscopy and NMR spectroscopy and the expected 2D morphology by scanning electron microscopy and atomic force microscopy. These findings introduce 2D MIMs as a unique yet readily accessible polymer architecture.
- Open Access
- 22 April 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (10) , 9397-9405
Regio- and Stereoselective Lactone Polymerization: Divergent Effect of Catalyst Modification and Monomer Structure
Selective ring-opening polymerization (ROP) of chiral lactones enables access to biodegradable polyesters with precisely controlled microstructures. Here, combined DFT modeling and experimental validation elucidate how fine-tuning of enantiopure SalBinam aluminum catalysts (through introduction of bromine atoms and tert-butyl groups, respectively, in ortho- and para-positions) modulates regio- and stereocontrol in the ROP of methyl glycolide (MeG) and lactide (LA). Computations reveal that regioselectivity in MeG polymerization arises mainly from steric repulsion, with a small contribution from weak stabilizing C-H···Br interactions that favor ring-opening at the glycolic site, consistent with the experimentally enhanced regioselectivity for (R)-MeG. In contrast, the same steric congestion at the ligand’s ortho positions destabilizes the key transition states in rac-LA polymerization, reducing the calculated stereoselectivity. Experiments confirm the predicted loss of stereocontrol, yielding nearly atactic PLA under standard conditions. Extension of the computational framework to rac-MeG polymerization promoted by racemic catalyst identified a low-barrier, stepwise polymer chain exchange pathway that rationalizes the experimentally observed syndiotacticity of poly(lactic-co-glycolic acid).
- 22 April 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (10) , 9397-9405
Open AccessRegio- and Stereoselective Lactone Polymerization: Divergent Effect of Catalyst Modification and Monomer Structure
Selective ring-opening polymerization (ROP) of chiral lactones enables access to biodegradable polyesters with precisely controlled microstructures. Here, combined DFT modeling and experimental validation elucidate how fine-tuning of enantiopure SalBinam aluminum catalysts (through introduction of bromine atoms and tert-butyl groups, respectively, in ortho- and para-positions) modulates regio- and stereocontrol in the ROP of methyl glycolide (MeG) and lactide (LA). Computations reveal that regioselectivity in MeG polymerization arises mainly from steric repulsion, with a small contribution from weak stabilizing C-H···Br interactions that favor ring-opening at the glycolic site, consistent with the experimentally enhanced regioselectivity for (R)-MeG. In contrast, the same steric congestion at the ligand’s ortho positions destabilizes the key transition states in rac-LA polymerization, reducing the calculated stereoselectivity. Experiments confirm the predicted loss of stereocontrol, yielding nearly atactic PLA under standard conditions. Extension of the computational framework to rac-MeG polymerization promoted by racemic catalyst identified a low-barrier, stepwise polymer chain exchange pathway that rationalizes the experimentally observed syndiotacticity of poly(lactic-co-glycolic acid).
- 13 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (3) , 2870-2875
Synthesis of Phenyl-Substituted Poly(3-Hydroxybutyrates) with High and Tunable Glass Transition Temperatures via Sequential Catalytic Transformations
Atactic polystyrene is a commonplace transparent thermoplastic with a high glass transition temperature (Tg ∼ 100 °C), but its nondegradable backbone leads to detrimental environmental accumulation. Poly(hydroxyalkanoates) (PHAs) have emerged as biodegradable polyester alternatives to conventional olefinic plastics, but only a few PHAs possess the high Tg values (>100 °C) characteristic of polystyrene. Herein, we report the synthesis of phenyl-substituted poly(3-hydroxybutyrates) (PhPHBs) via sequential catalytic carbonylation and zinc-mediated ring-opening polymerization (ROP). Both cis and trans isomers of α-phenyl-β-butyrolactone (α-Ph-β-BL) were synthesized and polymerized to provide 13 distinct PhPHBs of varying trans incorporation and their resulting properties were systematically studied. The PhPHBs exhibit high and tunable Tg values (104-128 °C) and high thermal stability. We anticipate this work will inform the design of future high Tg PHAs as degradable alternatives to polystyrene.
- 13 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (3) , 2870-2875
Synthesis of Phenyl-Substituted Poly(3-Hydroxybutyrates) with High and Tunable Glass Transition Temperatures via Sequential Catalytic Transformations
Atactic polystyrene is a commonplace transparent thermoplastic with a high glass transition temperature (Tg ∼ 100 °C), but its nondegradable backbone leads to detrimental environmental accumulation. Poly(hydroxyalkanoates) (PHAs) have emerged as biodegradable polyester alternatives to conventional olefinic plastics, but only a few PHAs possess the high Tg values (>100 °C) characteristic of polystyrene. Herein, we report the synthesis of phenyl-substituted poly(3-hydroxybutyrates) (PhPHBs) via sequential catalytic carbonylation and zinc-mediated ring-opening polymerization (ROP). Both cis and trans isomers of α-phenyl-β-butyrolactone (α-Ph-β-BL) were synthesized and polymerized to provide 13 distinct PhPHBs of varying trans incorporation and their resulting properties were systematically studied. The PhPHBs exhibit high and tunable Tg values (104-128 °C) and high thermal stability. We anticipate this work will inform the design of future high Tg PHAs as degradable alternatives to polystyrene.
- 22 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Efficient Kinetic-Resolution Copolymerization of Epoxides and CO2 Achieved via Computation-Guided Catalyst Design
The enantioselective resolution copolymerization of racemic terminal epoxides and CO2 is a powerful strategy for preparing isotactic polycarbonates. However, no catalytic system to date has enabled both high chemo- and stereoselectivity in this transformation. Herein, a computation-guided strategy was conducted to understand the key factors governing the activity, chemoselectivity, and stereoselectivity of chiral bimetallic cobalt complexes. Computational fine-tuning of bimetallic synergy allowed accelerated copolymerization, suppression of epoxide homopolymerization, and enhanced chiral induction. Ultimately, a privileged chiral bimetallic catalyst bearing 6,6-ditriflate substituents was computationally designed and experimentally synthesized, which exhibited unprecedented enantioselectivity (s-factor up to over 300) and high chemoselectivity (>95% carbonate units) for various racemic epoxides during resolution copolymerization with CO2. This study is expected to serve as a theoretical framework for broadly guiding the design of privileged chiral catalysts for asymmetric catalytic polymerizations.
- 22 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Efficient Kinetic-Resolution Copolymerization of Epoxides and CO2 Achieved via Computation-Guided Catalyst Design
The enantioselective resolution copolymerization of racemic terminal epoxides and CO2 is a powerful strategy for preparing isotactic polycarbonates. However, no catalytic system to date has enabled both high chemo- and stereoselectivity in this transformation. Herein, a computation-guided strategy was conducted to understand the key factors governing the activity, chemoselectivity, and stereoselectivity of chiral bimetallic cobalt complexes. Computational fine-tuning of bimetallic synergy allowed accelerated copolymerization, suppression of epoxide homopolymerization, and enhanced chiral induction. Ultimately, a privileged chiral bimetallic catalyst bearing 6,6-ditriflate substituents was computationally designed and experimentally synthesized, which exhibited unprecedented enantioselectivity (s-factor up to over 300) and high chemoselectivity (>95% carbonate units) for various racemic epoxides during resolution copolymerization with CO2. This study is expected to serve as a theoretical framework for broadly guiding the design of privileged chiral catalysts for asymmetric catalytic polymerizations.
- 18 December 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (1) , 801-810
Mechanism-Inspired Synthesis of Poly(alkyl malonates) via Alternating Copolymerization of Epoxides and Meldrum’s Acid Derivatives
Direct incorporation of malonate units into polymer backbones is a synthetic challenge. Herein, we report the alternating and controlled anionic copolymerization of epoxides and Meldrum's acid (MA) derivatives to access poly(alkyl malonates) using (N,N'-bis(salicylidene)phenylenediamine)AlCl and a tris(dialkylamino)cyclopropenium chloride cocatalyst. This unique copolymerization yields a malonate-containing repeat unit while releasing a small molecule upon MA-derivative ring-opening. Mechanistic and computational studies reveal that the nature of the small molecule released influences overall polymerization kinetics, side reaction behavior, and molecular weight control. Controlled copolymerization of MA derivatives with a range of epoxides ultimately yields a library of new poly(alkyl malonates) with diverse and tunable thermal properties.
- 18 December 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (1) , 801-810
Mechanism-Inspired Synthesis of Poly(alkyl malonates) via Alternating Copolymerization of Epoxides and Meldrum’s Acid Derivatives
Direct incorporation of malonate units into polymer backbones is a synthetic challenge. Herein, we report the alternating and controlled anionic copolymerization of epoxides and Meldrum's acid (MA) derivatives to access poly(alkyl malonates) using (N,N'-bis(salicylidene)phenylenediamine)AlCl and a tris(dialkylamino)cyclopropenium chloride cocatalyst. This unique copolymerization yields a malonate-containing repeat unit while releasing a small molecule upon MA-derivative ring-opening. Mechanistic and computational studies reveal that the nature of the small molecule released influences overall polymerization kinetics, side reaction behavior, and molecular weight control. Controlled copolymerization of MA derivatives with a range of epoxides ultimately yields a library of new poly(alkyl malonates) with diverse and tunable thermal properties.
- Open Access
- 18 December 2023
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (1) , 318-323
Mechanism of Alternating Poly(lactic-co-glycolic acid) Formation by Polymerization of (S)- and (R)-3-Methyl Glycolide Using an Enantiopure Aluminum Complex
The mechanism(s) of alternating PLGA synthesis by ring-opening polymerization of (S)- and (R)-3-methyl glycolide promoted by enantiopure aluminum complexes have been rationalized by density functional theory (DFT) calculations. The high regioselectivity of the (S)-MeG polymerization is obtained by repetitive ring opening at the glycolyl site by the (R)-catalyst whereas a lower regioselectivity is predicted by the ROP of (R)-MeG. The behavior of the two monomers is rationalized by unveiling the active site fluxionality of the enantiopure catalyst, identifying the rate-limiting steps that encode a preference at the glycolyl site versus the lactyl site, and revealing selection of the opposite monomer enantioface. The microstructure of the PLGA copolymers is predicted by considering the influence of the configuration of the last inserted unit. The identification of the preferred mechanistic paths may allow for a targeted catalyst design to enhance control of the polymer microstructures.
- 18 December 2023
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (1) , 318-323
Open AccessMechanism of Alternating Poly(lactic-co-glycolic acid) Formation by Polymerization of (S)- and (R)-3-Methyl Glycolide Using an Enantiopure Aluminum Complex
The mechanism(s) of alternating PLGA synthesis by ring-opening polymerization of (S)- and (R)-3-methyl glycolide promoted by enantiopure aluminum complexes have been rationalized by density functional theory (DFT) calculations. The high regioselectivity of the (S)-MeG polymerization is obtained by repetitive ring opening at the glycolyl site by the (R)-catalyst whereas a lower regioselectivity is predicted by the ROP of (R)-MeG. The behavior of the two monomers is rationalized by unveiling the active site fluxionality of the enantiopure catalyst, identifying the rate-limiting steps that encode a preference at the glycolyl site versus the lactyl site, and revealing selection of the opposite monomer enantioface. The microstructure of the PLGA copolymers is predicted by considering the influence of the configuration of the last inserted unit. The identification of the preferred mechanistic paths may allow for a targeted catalyst design to enhance control of the polymer microstructures.
- Top Cited Papers
- 26 August 2022
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 12 (18) , 11037-11070
Multifunctional Catalysts for Ring-Opening Copolymerizations
- 26 August 2022
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 12 (18) , 11037-11070
Top Cited PapersMultifunctional Catalysts for Ring-Opening Copolymerizations