Parnian Ghanbarizadeh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Parnian Ghanbarizadeh has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Akrami
Department of Engineering, University of Exeter, Exeter EX4 4QF, UK
2 shared publications - Mohsen Abbasi
Department of Chemical Engineering, Faculty of Petroleum, Gas and Petrochemical Engineering, Persian Gulf University, Bushehr, Iran
2 shared publications - Ahmad Azari
Faculty of Petroleum, Gas and Petrochemical Engineering, Persian Gulf University
1 shared publication - Amir Rostami
Department of Chemical Engineering, Persian Gulf University, Bushehr, P.O. Box 75169-13817, Iran
1 shared publication Iman Fooladi
1 shared publication- Mahdieh Dibaj
Department of Engineering, University of Exeter, Exeter EX4 4QF, UK
1 shared publication
Latest Publications
- Open Access
- 1 October 2024
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 17 (10) , 105973
Titania and zirconia ceramic nanofiltration membrane fabrication by coating method on mullite and mullite-alumina microfiltration supports for industrial wastewater treatment
- 1 October 2024
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 17 (10) , 105973
Open AccessTitania and zirconia ceramic nanofiltration membrane fabrication by coating method on mullite and mullite-alumina microfiltration supports for industrial wastewater treatment
- Open Access
Performance Enhancement of Specific Adsorbents for Hardness Reduction of Drinking Water and Groundwater
One of the most advantageous methods for lowering water hardness is the use of low-cost adsorbents. In this research, the effectiveness of natural zeolite (clinoptilolite type), activated carbon, and activated alumina was evaluated. These adsorbents were sequentially modified by NaCl, HCl, and NaCl-HCL to improve their ability to adsorb. The contact time and the amount of adsorbent used in the adsorption process were investigated experimentally to determine their effects. The results indicated that the best contact time for hardness reduction was 90 min, and the best concentrations of adsorbents in drinking water for zeolite, activated carbon, and activated alumina were 40, 60, and 60 g/L, respectively. In addition, for groundwater, these figures were 60, 40, and 40 g/L, respectively. The greatest possible decreases in total hardness under the best conditions by natural zeolite, activated carbon, and activated alumina adsorbents were 93.07%, 30.76%, and 56.92%, respectively, for drinking water and 59.23%, 15.67 %, and 39.72% for groundwater. According to the results obtained from experiments, NaCl-modified zeolite, natural zeolite, and NaCl-HCl-modified activated carbon performed better in terms of parameter reduction. The equilibrium data were well fitted by the Langmuir isotherm model, whereas the kinetic data for the adsorption process were consistent with the pseudo-second-order model. The equilibrium study of the adsorption process by the Morris–Weber model revealed that both chemical and physical adsorption are involved.
Open AccessPerformance Enhancement of Specific Adsorbents for Hardness Reduction of Drinking Water and Groundwater
One of the most advantageous methods for lowering water hardness is the use of low-cost adsorbents. In this research, the effectiveness of natural zeolite (clinoptilolite type), activated carbon, and activated alumina was evaluated. These adsorbents were sequentially modified by NaCl, HCl, and NaCl-HCL to improve their ability to adsorb. The contact time and the amount of adsorbent used in the adsorption process were investigated experimentally to determine their effects. The results indicated that the best contact time for hardness reduction was 90 min, and the best concentrations of adsorbents in drinking water for zeolite, activated carbon, and activated alumina were 40, 60, and 60 g/L, respectively. In addition, for groundwater, these figures were 60, 40, and 40 g/L, respectively. The greatest possible decreases in total hardness under the best conditions by natural zeolite, activated carbon, and activated alumina adsorbents were 93.07%, 30.76%, and 56.92%, respectively, for drinking water and 59.23%, 15.67 %, and 39.72% for groundwater. According to the results obtained from experiments, NaCl-modified zeolite, natural zeolite, and NaCl-HCl-modified activated carbon performed better in terms of parameter reduction. The equilibrium data were well fitted by the Langmuir isotherm model, whereas the kinetic data for the adsorption process were consistent with the pseudo-second-order model. The equilibrium study of the adsorption process by the Morris–Weber model revealed that both chemical and physical adsorption are involved.