DNDavid Nigl

David Nigl

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


David Nigl has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Modeling, Feedforward Control, and Constrained Trajectory Generation for a Concrete Conveyance System

    by Boris Blagojevic, Andreas Gienger, David Nigl, Lucio Blandini, Oliver Sawodny

    Automated fabrication of concrete elements requires precise control of outgoing volume flow. Since measurements of the volume flow or the total extruded volume are challenging during production, a feedforward control is required, which in turn necessitates a model of the dynamics at hand. In this paper, a concrete conveyance system with two pumps is considered. These are mounted at the inlet and outlet of the hose, respectively. Based on previous work, a dynamical model with concentrated parameters is derived, which is motivated on the general distributed dynamics of two-phase flow. The model is validated by experiments, with parameters calculated by a tailored estimation approach. Based thereon, a feedforward control approach is presented and tested in simulation, exploiting the approximate flatness of the system. The flat parametrization is then used for constrained, smooth setpoint transition of the volume flow with minimal transition time.


  • Open Access

    Simulation-Based Investigations of the Load-Bearing Behavior of Concrete Hollow Sphere Slabs Exposed to Fire

    by Olga Miller, Oliver Gericke, David Nigl, Daria Kovaleva, Lucio Blandini

    This paper concerns the investigations of the flexural capacity of concrete slabs with integrated concrete hollow spheres that are subjected to fire and their mass saving potential compared to solid slabs. (1) Background: The overuse of concrete in construction contributes considerably to global CO2 emissions; therefore, the potential for mass reduction in structural components must be fully exploited. However, the design regulations for weight-minimized components, particularly slabs with internal voids, are often not explicitly covered by standards, such as the fire design standard relevant to this paper. (2) Methods: Based on the design guidelines for statically determinate structures in Eurocode 2-2 and DIN 4102-4, a solid slab and a concrete slab with concrete hollow spheres are designed and evaluated with regard to their weight and flexural capacity when subjected to fire. The temperature profiles within the slab cross-section exposed to fire are simulated using ABAQUS finite element software, considering the physically nonlinear, temperature-dependent material behavior of concrete and steel. Using these results, the strain distribution corresponding to the maximum flexural moment is iteratively determined at the weakest cross-section, which exhibits the largest void. (3) Results: All components show sufficient flexural capacity for the target fire duration of 90 min. (4) Conclusion: In the context of this study, the design guidelines according to Eurocode 2-2 and DIN 4102-4 are proven to be fully applicable also for concrete hollow sphere slabs.


  • Open Access

    Holistic Quality Model and Assessment—Supporting Decision-Making towards Sustainable Construction Using the Design and Production of Graded Concrete Components as an Example

    by Deniz Frost, Oliver Gericke, Roberta Di Bari, Laura Balangé, Li Zhang, Boris Blagojevic, David Nigl, Phillip Haag, Lucio Blandini, Hans Christian Jünger, et al.

    This paper describes a holistic quality model (HQM) and assessment to support decision-making processes in construction. A graded concrete slab serves as an example to illustrate how to consider technical, environmental, and social quality criteria and their interrelations. The evaluation of the design and production process of the graded concrete component shows that it has advantages compared to a conventional solid slab, especially in terms of environmental performance. At the same time, the holistic quality model identifies potential improvements for the technology of graded concrete. It will be shown that the holistic quality model can be used to (a) consider the whole life cycle in decision-making in the early phases and, thus, make the complexity of construction processes manageable for quality and sustainability assessments and (b) make visible interdependencies between different quality and sustainability criteria, to help designers make better-informed decisions regarding the overall quality. The results show how different quality aspects can be assessed and trade-offs are also possible through the understanding of the relationships among characteristics. For this purpose, in addition to the quality assessment of graded concrete, an overview of the interrelations of different quality characteristics is provided. While this article demonstrates how a HQM can support decision-making in design, the validity of the presented evaluation is limited by the data availability and methodological challenges, specifically regarding the quantification of interrelations.