Zhiqiang Zhang
Zhiqiang Zhang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ciming Zhou
National Engineering Research Center of Fiber Optic Sensing Technology and Networks, Wuhan University of Technology, Wuhan 430070, China
1 shared publication - Hanjie Liu
Shenzhen Key Laboratory of Photonic Devices and Sensing Systems for Internet of Things, Guangdong and Hong Kong Joint Research Centre for Optical Fibre Sensors, State Key Laboratory of Radio Frequency Heterogeneous Integration, Shenzhen University, Shenzhen 518060, China
1 shared publication He Wei
{{@ aff.addressEn}
1 shared publication- Hongcan Gu
Naval University of Engineering, Wuhan 430033, China
1 shared publication - Junbin Huang
Department of Weaponry Engineering, Naval Engineering University, Wuhan 430070, China
1 shared publication Liu Shibin
{{@ aff.addressEn}
1 shared publication
Latest Publications
- Open Access
- 1 January 2024
- Published by Journal of Applied Optics in Journal of Applied Optics
- Vol. 45 (4) , 812-818
Low-noise ice galloping monitoring of OPGW lines based on reference sensors
针对外场环境下光纤复合架空地线舞动周期监测困难等问题,提出一种基于参考传感器输入的弱反射光栅低噪声舞动监测阵列,通过理论模型推导了参考传感器及监测传感器信号模型及自适应滤波器信号处理步骤,并基于不同相关系数的噪声输入进行仿真,对比分析了监测传感器的降噪效果,最后将低噪声分布式弱反射光栅舞动监测系统布设于西部某自治州220 kV输电线路。外场实验结果表明,经过参考传感器构建输入信号实现自适应滤波后,平均噪声功率谱密度在100 Hz带宽内降低6.34 dB,且阵列监测强度图谱经过算法优化后,能够明显观测到监测档距内呈现约100 m舞动周期事件。该研究成果为进一步完善典型事件分类数据处理及模式识别数据库创造了一定条件,有一定的工程应用前景。
- 1 January 2024
- Published by Journal of Applied Optics in Journal of Applied Optics
- Vol. 45 (4) , 812-818
Open AccessLow-noise ice galloping monitoring of OPGW lines based on reference sensors
针对外场环境下光纤复合架空地线舞动周期监测困难等问题,提出一种基于参考传感器输入的弱反射光栅低噪声舞动监测阵列,通过理论模型推导了参考传感器及监测传感器信号模型及自适应滤波器信号处理步骤,并基于不同相关系数的噪声输入进行仿真,对比分析了监测传感器的降噪效果,最后将低噪声分布式弱反射光栅舞动监测系统布设于西部某自治州220 kV输电线路。外场实验结果表明,经过参考传感器构建输入信号实现自适应滤波后,平均噪声功率谱密度在100 Hz带宽内降低6.34 dB,且阵列监测强度图谱经过算法优化后,能够明显观测到监测档距内呈现约100 m舞动周期事件。该研究成果为进一步完善典型事件分类数据处理及模式识别数据库创造了一定条件,有一定的工程应用前景。
- Open Access
Pretreatment of Ultra-Weak Fiber Bragg Grating Hydrophone Array Based on Cubic Spline Interpolation Using Intensity Compensation
The demodulation algorithm based on 3 × 3 coupler in a fiber-optic hydrophone array has gained extensive attention in recent years. The traditional method uses a circulator to construct the normal path-match interferometry; however, the problem of increasing the asymmetry of the three-way signal to be demodulated is easily overlooked. To provide a solution, we report a pretreatment method for hydrophone array based on 3 × 3 coupler demodulation. We use cubic spline interpolation to perform nonlinear fitting to the reflected pulse train and calculate the peak-to-peak values of the single pulse to determine the light intensity compensation coefficient of the interference signal, so as to demodulate the corrected three-way interference signal. For experimental verification, ultra-weak fiber Bragg gratings (uwFBGs) with reflectivity of −50 dB are applied to construct a hydrophone array with 800 sensors, and a vibratory liquid column method is set up to generate a low-frequency hydroacoustic signal. Compared to the traditional demodulation algorithm based on a 3 × 3 coupler, the pretreatment method can improve the consistency of interference signals. The Lissajous figures show that cubic spline interpolation can improve the accuracy of monopulse peak seeking results by about 1 dB, and intensity compensation can further lead to a much lower noise density level for the interference pulse amplitude—specifically, more than 7 dB at 5~50 Hz—and the signal-to-noise ratio is improved by approximately 10 dB at 10 Hz. The distinct advantages of the proposed pretreatment method make it an excellent candidate for a hydrophone array system based on path-match interferometry.
Open AccessPretreatment of Ultra-Weak Fiber Bragg Grating Hydrophone Array Based on Cubic Spline Interpolation Using Intensity Compensation
The demodulation algorithm based on 3 × 3 coupler in a fiber-optic hydrophone array has gained extensive attention in recent years. The traditional method uses a circulator to construct the normal path-match interferometry; however, the problem of increasing the asymmetry of the three-way signal to be demodulated is easily overlooked. To provide a solution, we report a pretreatment method for hydrophone array based on 3 × 3 coupler demodulation. We use cubic spline interpolation to perform nonlinear fitting to the reflected pulse train and calculate the peak-to-peak values of the single pulse to determine the light intensity compensation coefficient of the interference signal, so as to demodulate the corrected three-way interference signal. For experimental verification, ultra-weak fiber Bragg gratings (uwFBGs) with reflectivity of −50 dB are applied to construct a hydrophone array with 800 sensors, and a vibratory liquid column method is set up to generate a low-frequency hydroacoustic signal. Compared to the traditional demodulation algorithm based on a 3 × 3 coupler, the pretreatment method can improve the consistency of interference signals. The Lissajous figures show that cubic spline interpolation can improve the accuracy of monopulse peak seeking results by about 1 dB, and intensity compensation can further lead to a much lower noise density level for the interference pulse amplitude—specifically, more than 7 dB at 5~50 Hz—and the signal-to-noise ratio is improved by approximately 10 dB at 10 Hz. The distinct advantages of the proposed pretreatment method make it an excellent candidate for a hydrophone array system based on path-match interferometry.