Johannes Bürger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Johannes Bürger has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
- Stefan Alexander Maier
Monash University
8 shared publications - Markus Alexander Schmidt
Leibniz Institute of Photonic Technology Jena Germany
7 shared publications - Leonardo de Souza Menezes
Universidade Federal de Pernambuco
6 shared publications - Jisoo Kim
Leibniz Institute of Photonic Technology
5 shared publications - Julian Gargiulo
Fundacion Instituto Leloir
4 shared publications - Bumjoon Jang
Leibniz Institute of Photonic Technology
3 shared publications
Latest Publications
- Open Access
- 16 October 2026
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 13 (21) , 6373-6385
Exciton-Tunable Phase Control and Superstrong Coupling through Multimode Polariton Engineering in Planar Waveguides
Strong light–matter coupling in optical waveguides provides a versatile platform for engineering hybrid polaritonic modes and their dispersion. Here, we investigate multimode exciton–photon coupling in visible semiconductor waveguides supporting several transverse electric modes. Using rigorous coupled-wave analysis combined with a coupled-oscillator model, we show that the photonic band structure can be engineered across a range of regimes, from conventional multimode strong coupling to the superstrong coupling regime, where the Rabi coupling becomes comparable to the spacing between adjacent photonic modes. In the latter regime, hybridization between orthogonal electromagnetic modes is enabled by restricting the active material to a subregion of the mode volume where the photonic modes exhibit strong mutual overlap. This breaking of the orthogonality leads to polaritonic branches whose composition can be tuned among several photonic modes and the exciton. We demonstrate that small shifts of the exciton resonance produce pronounced changes in the propagation constants of different polariton branches, enabling exciton-controlled phase modulation through modal interference and, in the superstrong coupling regime, direct modal switching across a continuous S-shaped dispersion. The resulting figures of merit predict π phase shifts for exciton energy shifts of only a few meV over propagation lengths of tens of micrometers, while larger shifts are still required for mode switching. These results establish multimode waveguide polaritons as a versatile platform spanning multiple coupling regimes, for compact phase and intensity control in integrated photonic architectures.
- 16 October 2026
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 13 (21) , 6373-6385
Open AccessExciton-Tunable Phase Control and Superstrong Coupling through Multimode Polariton Engineering in Planar Waveguides
Strong light–matter coupling in optical waveguides provides a versatile platform for engineering hybrid polaritonic modes and their dispersion. Here, we investigate multimode exciton–photon coupling in visible semiconductor waveguides supporting several transverse electric modes. Using rigorous coupled-wave analysis combined with a coupled-oscillator model, we show that the photonic band structure can be engineered across a range of regimes, from conventional multimode strong coupling to the superstrong coupling regime, where the Rabi coupling becomes comparable to the spacing between adjacent photonic modes. In the latter regime, hybridization between orthogonal electromagnetic modes is enabled by restricting the active material to a subregion of the mode volume where the photonic modes exhibit strong mutual overlap. This breaking of the orthogonality leads to polaritonic branches whose composition can be tuned among several photonic modes and the exciton. We demonstrate that small shifts of the exciton resonance produce pronounced changes in the propagation constants of different polariton branches, enabling exciton-controlled phase modulation through modal interference and, in the superstrong coupling regime, direct modal switching across a continuous S-shaped dispersion. The resulting figures of merit predict π phase shifts for exciton energy shifts of only a few meV over propagation lengths of tens of micrometers, while larger shifts are still required for mode switching. These results establish multimode waveguide polaritons as a versatile platform spanning multiple coupling regimes, for compact phase and intensity control in integrated photonic architectures.
- 11 February 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (2) , 303
Distinct geometry-induced optical chirality in vertically nanoprinted hollow-core light cages
Controlling light in photonic waveguides with embedded chirality is essential for advancing emerging technologies in quantum optics, biosensing, and optical communications, yet planar-photonic integration of such chiral structures has long been limited by fabrication and design constraints. In this work, we introduce vertically nanoprinted twisted light cages (tLCs) as a new class, to our knowledge, of chiral hollow-core waveguides that combine record-high geometric twists with strong optical chirality. These waveguides support the robust formation of circularly polarized eigenmodes and exhibit record-high circular birefringence and circular dichroism, even at sub-millimeter lengths. Beyond enabling strong chiral light–matter interaction, tLCs offer a compact and versatile platform for complex light manipulation—alternative to metasurfaces and resonant structures. Their lateral core access and compatibility with planar integration pave the way for advanced polarization control and structured light applications, bridging the gap between chiral photonics and next-generation integrated photonic systems.
- 11 February 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (2) , 303
Distinct geometry-induced optical chirality in vertically nanoprinted hollow-core light cages
Controlling light in photonic waveguides with embedded chirality is essential for advancing emerging technologies in quantum optics, biosensing, and optical communications, yet planar-photonic integration of such chiral structures has long been limited by fabrication and design constraints. In this work, we introduce vertically nanoprinted twisted light cages (tLCs) as a new class, to our knowledge, of chiral hollow-core waveguides that combine record-high geometric twists with strong optical chirality. These waveguides support the robust formation of circularly polarized eigenmodes and exhibit record-high circular birefringence and circular dichroism, even at sub-millimeter lengths. Beyond enabling strong chiral light–matter interaction, tLCs offer a compact and versatile platform for complex light manipulation—alternative to metasurfaces and resonant structures. Their lateral core access and compatibility with planar integration pave the way for advanced polarization control and structured light applications, bridging the gap between chiral photonics and next-generation integrated photonic systems.
- Top Cited Papers
- 28 March 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (13) , 12491-12605
Nanofabrication for Nanophotonics
Nanofabrication, a pivotal technology at the intersection of nanoscale engineering and high-resolution patterning, has substantially advanced over recent decades. This technology enables the creation of nanopatterns on substrates crucial for developing nanophotonic devices and other applications in diverse fields including electronics and biosciences. Here, this mega-review comprehensively explores various facets of nanofabrication focusing on its application in nanophotonics. It delves into high-resolution techniques like focused ion beam and electron beam lithography, methods for 3D complex structure fabrication, scalable manufacturing approaches, and material compatibility considerations. Special attention is given to emerging trends such as the utilization of two-photon lithography for 3D structures and advanced materials like phase change substances and 2D materials with excitonic properties. By highlighting these advancements, the review aims to provide insights into the ongoing evolution of nanofabrication, encouraging further research and application in creating functional nanostructures. This work encapsulates critical developments and future perspectives, offering a detailed narrative on the state-of-the-art in nanofabrication tailored for both new researchers and seasoned experts in the field.
- 28 March 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (13) , 12491-12605
Top Cited PapersNanofabrication for Nanophotonics
Nanofabrication, a pivotal technology at the intersection of nanoscale engineering and high-resolution patterning, has substantially advanced over recent decades. This technology enables the creation of nanopatterns on substrates crucial for developing nanophotonic devices and other applications in diverse fields including electronics and biosciences. Here, this mega-review comprehensively explores various facets of nanofabrication focusing on its application in nanophotonics. It delves into high-resolution techniques like focused ion beam and electron beam lithography, methods for 3D complex structure fabrication, scalable manufacturing approaches, and material compatibility considerations. Special attention is given to emerging trends such as the utilization of two-photon lithography for 3D structures and advanced materials like phase change substances and 2D materials with excitonic properties. By highlighting these advancements, the review aims to provide insights into the ongoing evolution of nanofabrication, encouraging further research and application in creating functional nanostructures. This work encapsulates critical developments and future perspectives, offering a detailed narrative on the state-of-the-art in nanofabrication tailored for both new researchers and seasoned experts in the field.
- Open Access
Impact of coordinate frames on mode formation in twisted waveguides
Off-axis twisted waveguides possess unique optical properties such as circular and orbital angular momentum (OAM) birefringence, setting them apart from their straight counterparts. Analyzing mode formation in such helical waveguides relies on the use of specific coordinate frames that follow the twist of the structure, making the waveguide invariant along one of the new coordinates. In this study, the differences between modes forming in high-contrast off-axis twisted waveguides defined in the three most important coordinate systems - the Frenet-Serret, the helicoidal, or the Overfelt frame - are investigated through numerical simulations. We explore modal characteristics up to high twist rates (pitch: 50 $μ$m) and clarify a transformation allowing to map the modal fields and the effective index back to the laboratory frame. In case the waveguide is single-mode, the fundamental modes of the three types of waveguides show significant differences in terms of birefringence, propagation loss, and polarization. Conversely, the modal characteristics of the investigated waveguides are comparable in the multimode domain. Furthermore, our study examines the impact of twisting on spatial mode properties with the results suggesting a potential influence of the photonic spin Hall and orbital Hall effects. Additionally, modes of single-mode helical waveguides were found to exhibit superchiral fields on their surfaces. Implementation approaches such as 3D-nanoprinting or fiber-preform twisting open the doors to potential applications of such highly twisted waveguides, including chip-integrated devices for broadband spin- and OAM-preserving optical signal transport, as well as applications in chiral spectroscopy or nonlinear frequency conversion.
Open AccessImpact of coordinate frames on mode formation in twisted waveguides
Off-axis twisted waveguides possess unique optical properties such as circular and orbital angular momentum (OAM) birefringence, setting them apart from their straight counterparts. Analyzing mode formation in such helical waveguides relies on the use of specific coordinate frames that follow the twist of the structure, making the waveguide invariant along one of the new coordinates. In this study, the differences between modes forming in high-contrast off-axis twisted waveguides defined in the three most important coordinate systems - the Frenet-Serret, the helicoidal, or the Overfelt frame - are investigated through numerical simulations. We explore modal characteristics up to high twist rates (pitch: 50 $μ$m) and clarify a transformation allowing to map the modal fields and the effective index back to the laboratory frame. In case the waveguide is single-mode, the fundamental modes of the three types of waveguides show significant differences in terms of birefringence, propagation loss, and polarization. Conversely, the modal characteristics of the investigated waveguides are comparable in the multimode domain. Furthermore, our study examines the impact of twisting on spatial mode properties with the results suggesting a potential influence of the photonic spin Hall and orbital Hall effects. Additionally, modes of single-mode helical waveguides were found to exhibit superchiral fields on their surfaces. Implementation approaches such as 3D-nanoprinting or fiber-preform twisting open the doors to potential applications of such highly twisted waveguides, including chip-integrated devices for broadband spin- and OAM-preserving optical signal transport, as well as applications in chiral spectroscopy or nonlinear frequency conversion.
- 5 April 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (16) , 165301
Impact of coordinate frames on mode formation in twisted waveguides
Off-axis twisted waveguides possess unique optical properties such as circular and orbital angular momentum (OAM) birefringence, setting them apart from their straight counterparts. Analyzing mode formation in such helical waveguides relies on the use of specific coordinate frames that follow the twist of the structure. In this paper, the differences between modes forming in high-contrast off-axis twisted waveguides defined in the three most important coordinate systems—the Frenet-Serret, the helicoidal, or the Overfelt frame—are investigated through numerical simulations. We explore modal characteristics up to high twist rates (pitch: ) and clarify a transformation allowing us to map the modal fields and the effective index back to the laboratory frame. In case the waveguide is single-mode, the fundamental modes of the three types of waveguides show significant differences in terms of birefringence, propagation loss, and polarization. Conversely, the modal characteristics of the investigated waveguides are comparable in the multimode domain. Furthermore, our paper examines the impact of twisting on spatial mode properties. At high twist rates, a separation of modes with different spins is observed, suggesting a potential influence of the photonic spin Hall effect. Additionally, twisting induces OAM-dependent changes in the intensity distribution, indicating the presence of the photonic orbital Hall effect. Lastly, modes of single-mode helical waveguides were found to exhibit superchiral fields on their surfaces. These findings provide a comprehensive basis for further research into the physics of twisted off-axis waveguides. Implementation approaches such as 3D nanoprinting or fiber-preform twisting open the doors to potential applications of such highly twisted waveguides, including chip-integrated devices for broadband spin- and OAM-preserving optical signal transport, as well as applications in chiral spectroscopy or nonlinear frequency conversion.- 5 April 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (16) , 165301
Impact of coordinate frames on mode formation in twisted waveguides
Off-axis twisted waveguides possess unique optical properties such as circular and orbital angular momentum (OAM) birefringence, setting them apart from their straight counterparts. Analyzing mode formation in such helical waveguides relies on the use of specific coordinate frames that follow the twist of the structure. In this paper, the differences between modes forming in high-contrast off-axis twisted waveguides defined in the three most important coordinate systems—the Frenet-Serret, the helicoidal, or the Overfelt frame—are investigated through numerical simulations. We explore modal characteristics up to high twist rates (pitch: ) and clarify a transformation allowing us to map the modal fields and the effective index back to the laboratory frame. In case the waveguide is single-mode, the fundamental modes of the three types of waveguides show significant differences in terms of birefringence, propagation loss, and polarization. Conversely, the modal characteristics of the investigated waveguides are comparable in the multimode domain. Furthermore, our paper examines the impact of twisting on spatial mode properties. At high twist rates, a separation of modes with different spins is observed, suggesting a potential influence of the photonic spin Hall effect. Additionally, twisting induces OAM-dependent changes in the intensity distribution, indicating the presence of the photonic orbital Hall effect. Lastly, modes of single-mode helical waveguides were found to exhibit superchiral fields on their surfaces. These findings provide a comprehensive basis for further research into the physics of twisted off-axis waveguides. Implementation approaches such as 3D nanoprinting or fiber-preform twisting open the doors to potential applications of such highly twisted waveguides, including chip-integrated devices for broadband spin- and OAM-preserving optical signal transport, as well as applications in chiral spectroscopy or nonlinear frequency conversion.- Open Access
- 2 February 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (11)
Unraveling the Chirality Transfer from Circularly Polarized Light to Single Plasmonic Nanoparticles
Due to their broken symmetry, chiral plasmonic nanostructures have unique optical properties and numerous applications. However, there is still a lack of comprehension regarding how chirality transfer occurs between circularly polarized light (CPL) and these structures. Here, we thoroughly investigate the plasmon‐assisted growth of chiral nanoparticles from achiral Au nanocubes (AuNCs) via CPL without the involvement of any chiral molecule stimulators. We identify the structural chirality of our synthesized chiral plasmonic nanostructures using circular differential scattering (CDS) spectroscopy, which is correlated with scanning electron microscopy imaging at both the single‐particle and ensemble levels. Theoretical simulations, including hot‐electron surface maps, reveal that the plasmon‐induced chirality transfer is mediated by the asymmetric distribution of hot electrons on achiral AuNCs under CPL excitation. Furthermore, we shed light on how this plasmon‐induced chirality transfer can also be utilized for chiral growth in bimetallic systems, such as Ag or Pd on AuNCs. The results presented here uncover fundamental aspects of chiral light‐matter interaction and have implications for the future design and optimization of chiral sensors and chiral catalysis, among others.
- 2 February 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (11)
Open AccessUnraveling the Chirality Transfer from Circularly Polarized Light to Single Plasmonic Nanoparticles
Due to their broken symmetry, chiral plasmonic nanostructures have unique optical properties and numerous applications. However, there is still a lack of comprehension regarding how chirality transfer occurs between circularly polarized light (CPL) and these structures. Here, we thoroughly investigate the plasmon‐assisted growth of chiral nanoparticles from achiral Au nanocubes (AuNCs) via CPL without the involvement of any chiral molecule stimulators. We identify the structural chirality of our synthesized chiral plasmonic nanostructures using circular differential scattering (CDS) spectroscopy, which is correlated with scanning electron microscopy imaging at both the single‐particle and ensemble levels. Theoretical simulations, including hot‐electron surface maps, reveal that the plasmon‐induced chirality transfer is mediated by the asymmetric distribution of hot electrons on achiral AuNCs under CPL excitation. Furthermore, we shed light on how this plasmon‐induced chirality transfer can also be utilized for chiral growth in bimetallic systems, such as Ag or Pd on AuNCs. The results presented here uncover fundamental aspects of chiral light‐matter interaction and have implications for the future design and optimization of chiral sensors and chiral catalysis, among others.
- Open Access
- 2 February 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (11) , e202319920
Unraveling the Chirality Transfer from Circularly Polarized Light to Single Plasmonic Nanoparticles
Due to their broken symmetry, chiral plasmonic nanostructures have unique optical properties and numerous applications. However, there is still a lack of comprehension regarding how chirality transfer occurs between circularly polarized light (CPL) and these structures. Here, we thoroughly investigate the plasmon‐assisted growth of chiral nanoparticles from achiral Au nanocubes (AuNCs) via CPL without the involvement of any chiral molecule stimulators. We identify the structural chirality of our synthesized chiral plasmonic nanostructures using circular differential scattering (CDS) spectroscopy, which is correlated with scanning electron microscopy imaging at both the single‐particle and ensemble levels. Theoretical simulations, including hot‐electron surface maps, reveal that the plasmon‐induced chirality transfer is mediated by the asymmetric distribution of hot electrons on achiral AuNCs under CPL excitation. Furthermore, we shed light on how this plasmon‐induced chirality transfer can also be utilized for chiral growth in bimetallic systems, such as Ag or Pd on AuNCs. The results presented here uncover fundamental aspects of chiral light‐matter interaction and have implications for the future design and optimization of chiral sensors and chiral catalysis, among others.
- 2 February 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (11) , e202319920
Open AccessUnraveling the Chirality Transfer from Circularly Polarized Light to Single Plasmonic Nanoparticles
Due to their broken symmetry, chiral plasmonic nanostructures have unique optical properties and numerous applications. However, there is still a lack of comprehension regarding how chirality transfer occurs between circularly polarized light (CPL) and these structures. Here, we thoroughly investigate the plasmon‐assisted growth of chiral nanoparticles from achiral Au nanocubes (AuNCs) via CPL without the involvement of any chiral molecule stimulators. We identify the structural chirality of our synthesized chiral plasmonic nanostructures using circular differential scattering (CDS) spectroscopy, which is correlated with scanning electron microscopy imaging at both the single‐particle and ensemble levels. Theoretical simulations, including hot‐electron surface maps, reveal that the plasmon‐induced chirality transfer is mediated by the asymmetric distribution of hot electrons on achiral AuNCs under CPL excitation. Furthermore, we shed light on how this plasmon‐induced chirality transfer can also be utilized for chiral growth in bimetallic systems, such as Ag or Pd on AuNCs. The results presented here uncover fundamental aspects of chiral light‐matter interaction and have implications for the future design and optimization of chiral sensors and chiral catalysis, among others.
- Top Cited PapersOpen Access
- 12 October 2023
- Published by Springer Nature in Light: Science & Applications
- Vol. 12 (1) , 1-11
Unlocking the out-of-plane dimension for photonic bound states in the continuum to achieve maximum optical chirality
The realization of lossless metasurfaces with true chirality crucially requires the fabrication of three-dimensional structures, constraining experimental feasibility and hampering practical implementations. Even though the three-dimensional assembly of metallic nanostructures has been demonstrated previously, the resulting plasmonic resonances suffer from high intrinsic and radiative losses. The concept of photonic bound states in the continuum (BICs) is instrumental for tailoring radiative losses in diverse geometries, especially when implemented using lossless dielectrics, but applications have so far been limited to planar structures. Here, we introduce a novel nanofabrication approach to unlock the height of individual resonators within all-dielectric metasurfaces as an accessible parameter for the efficient control of resonance features and nanophotonic functionalities. In particular, we realize out-of-plane symmetry breaking in quasi-BIC metasurfaces and leverage this design degree of freedom to demonstrate an optical all-dielectric quasi-BIC metasurface with maximum intrinsic chirality that responds selectively to light of a particular circular polarization depending on the structural handedness. Our experimental results not only open a new paradigm for all-dielectric BICs and chiral nanophotonics, but also promise advances in the realization of efficient generation of optical angular momentum, holographic metasurfaces, and parity-time symmetry-broken optical systems.
- 12 October 2023
- Published by Springer Nature in Light: Science & Applications
- Vol. 12 (1) , 1-11
Top Cited PapersOpen AccessUnlocking the out-of-plane dimension for photonic bound states in the continuum to achieve maximum optical chirality
The realization of lossless metasurfaces with true chirality crucially requires the fabrication of three-dimensional structures, constraining experimental feasibility and hampering practical implementations. Even though the three-dimensional assembly of metallic nanostructures has been demonstrated previously, the resulting plasmonic resonances suffer from high intrinsic and radiative losses. The concept of photonic bound states in the continuum (BICs) is instrumental for tailoring radiative losses in diverse geometries, especially when implemented using lossless dielectrics, but applications have so far been limited to planar structures. Here, we introduce a novel nanofabrication approach to unlock the height of individual resonators within all-dielectric metasurfaces as an accessible parameter for the efficient control of resonance features and nanophotonic functionalities. In particular, we realize out-of-plane symmetry breaking in quasi-BIC metasurfaces and leverage this design degree of freedom to demonstrate an optical all-dielectric quasi-BIC metasurface with maximum intrinsic chirality that responds selectively to light of a particular circular polarization depending on the structural handedness. Our experimental results not only open a new paradigm for all-dielectric BICs and chiral nanophotonics, but also promise advances in the realization of efficient generation of optical angular momentum, holographic metasurfaces, and parity-time symmetry-broken optical systems.
- 11 January 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (2) , 2833-2845
3D-nanoprinted on-chip antiresonant waveguide with hollow core and microgaps for integrated optofluidic spectroscopy
Here, we unlock the properties of the recently introduced on-chip hollow-core microgap waveguide in the context of optofluidics which allows for intense light-water interaction over long lengths with fast response times. The nanoprinted waveguide operates by the anti-resonance effect in the visible and near-infrared domain and includes a hollow core with defined gaps every 176 µm. The spectroscopic capabilities are demonstrated by various absorption-related experiments, showing that the Beer-Lambert law can be applied without any modification. In addition to revealing key performance parameters, time-resolved experiments showed a decisive improvement in diffusion times resulting from the lateral access provided by the microgaps. Overall, the microgap waveguide represents a pathway for on-chip spectroscopy in aqueous environments.
- 11 January 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (2) , 2833-2845
3D-nanoprinted on-chip antiresonant waveguide with hollow core and microgaps for integrated optofluidic spectroscopy
Here, we unlock the properties of the recently introduced on-chip hollow-core microgap waveguide in the context of optofluidics which allows for intense light-water interaction over long lengths with fast response times. The nanoprinted waveguide operates by the anti-resonance effect in the visible and near-infrared domain and includes a hollow core with defined gaps every 176 µm. The spectroscopic capabilities are demonstrated by various absorption-related experiments, showing that the Beer-Lambert law can be applied without any modification. In addition to revealing key performance parameters, time-resolved experiments showed a decisive improvement in diffusion times resulting from the lateral access provided by the microgaps. Overall, the microgap waveguide represents a pathway for on-chip spectroscopy in aqueous environments.
- 19 October 2022
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 7 (10) , 2951-2959
Locally Structured On-Chip Optofluidic Hollow-Core Light Cages for Single Nanoparticle Tracking
Nanoparticle tracking analysis (NTA) is a widely used methodology to investigate nanoscale systems at the single species level. Here, we introduce the locally structured on-chip optofluidic hollow-core light cage, as a novel platform for waveguide-assisted NTA. This hollow waveguide guides light by the antiresonant effect in a sparse array of dielectric strands and includes a local modification to realize aberration-free tracking of individual nano-objects, defining a novel on-chip solution with properties specifically tailored for NTA. The key features of our system are (i) well-controlled nano-object illumination through the waveguide mode, (ii) diffraction-limited and aberration-free imaging at the observation site, and (iii) a high level of integration, achieved by on-chip interfacing to fibers. The present study covers all aspects relevant for NTA including design, simulation, implementation via 3D nanoprinting, and optical characterization. The capabilities of the approach to precisely characterize practically relevant nanosystems have been demonstrated by measuring the solvency-induced collapse of a nanoparticle system which includes polymer brush-based shells that react to changes in the liquid environment. Our study unlocks the advantages of the light cage approach in the context of NTA, suggesting its application in various areas such as bioanalytics, life science, environmental science, or nanoscale material science in general.
- 19 October 2022
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 7 (10) , 2951-2959
Locally Structured On-Chip Optofluidic Hollow-Core Light Cages for Single Nanoparticle Tracking
Nanoparticle tracking analysis (NTA) is a widely used methodology to investigate nanoscale systems at the single species level. Here, we introduce the locally structured on-chip optofluidic hollow-core light cage, as a novel platform for waveguide-assisted NTA. This hollow waveguide guides light by the antiresonant effect in a sparse array of dielectric strands and includes a local modification to realize aberration-free tracking of individual nano-objects, defining a novel on-chip solution with properties specifically tailored for NTA. The key features of our system are (i) well-controlled nano-object illumination through the waveguide mode, (ii) diffraction-limited and aberration-free imaging at the observation site, and (iii) a high level of integration, achieved by on-chip interfacing to fibers. The present study covers all aspects relevant for NTA including design, simulation, implementation via 3D nanoprinting, and optical characterization. The capabilities of the approach to precisely characterize practically relevant nanosystems have been demonstrated by measuring the solvency-induced collapse of a nanoparticle system which includes polymer brush-based shells that react to changes in the liquid environment. Our study unlocks the advantages of the light cage approach in the context of NTA, suggesting its application in various areas such as bioanalytics, life science, environmental science, or nanoscale material science in general.