Rama Kanwar Khangarot
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rama Kanwar Khangarot has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Manisha Khandelwal
Department of Chemistry, University College of Science, Mohanlal Sukhadia University, Udaipur, 313001, Rajasthan, India
9 shared publications- Kamakhya Prakash Misra
Department of Physics, Manipal University Jaipur, Jaipur, India
4 shared publications Ashok Kumawat
Department of Physics, School of Basic Sciences, Manipal University Jaipur, Jaipur, Rajasthan, 303007, India
3 shared publicationsGangotri Pemawat
3 shared publicationsSunita Choudhary
Department of Botany, University College of Science, Mohanlal Sukhadia University, Udaipur, Rajasthan, 313001, India
3 shared publicationsAshima Bagaria
Department of Physics, School of Basic Sciences, Manipal University Jaipur, Jaipur, 303007, Rajasthan, India
2 shared publications
Latest Publications
- 2 December 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (29) , e02269
Modified Julia Olefination Approach to Chiral α‐Fluorovinyl Amino Alcohols and Amino Acids, via Fluorovinyl Oxazolidine Precursors, Conformational and Crystallographic Analyses
Synthesis of chiral α‐fluorovinyl β‐aryl/heteroaryl/alkyl amino alcohols was achieved via intermediate 4‐(α‐fluorovinyl) 2,2‐dimethyloxazolidines with stereochemically defined preexisting stereogenic centers, derived from ( S )‐ or ( R )‐serine. Previously unknown 4‐fluorovinyl 2,2‐dimethyloxazolidines with a fluorine atom placed alpha to the oxazolidine were prepared via Julia olefination of tert ‐butyl ( S )‐4‐{( S )‐[benzo[ d ]thiazol‐2‐ylsulfonyl]fluoromethyl}‐2,2‐dimethyloxazolidine‐3‐carboxylate and its ( R , R ) enantiomer, with a series of aldehydes. By choice of conditions, olefinations could be tuned towards Z ‐ or E ‐selectivity. E / Z olefin mixtures with electron‐rich aryl and heteroaryl substituents were isomerized exclusively or predominantly to the Z ‐isomer. N ‐Boc protected β‐aryl/alkyl substituted α‐fluorovinyl amino alcohols were obtained by oxazolidine hydrolysis. To demonstrate utility for synthesis of amino acids, ( R , Z )‐ and ( S , Z )‐ p ‐methoxyphenyl‐ and the ( S , E )‐ p ‐cyanophenyl‐substituted alkenes were subjected to oxidation, which was very challenging. The use of cat. TEMPO/cat. NaOCl/NaClO 2 gave the N ‐Boc protected fluorovinyl amino acids that were converted to their methyl esters. Enantioselective HPLC of the ( S )‐ and ( R )‐ p ‐methoxyphenyl‐substituted products formed at each step of the synthetic sequence indicated that high enantiomeric purity was retained through the entire synthesis. Crystal structures of two fluorovinyl oxazolidines and one amino alcohol provided insight into the solid‐state conformations. NMR and computational analyses were used to obtain insight into plausible solution conformations.
- 2 December 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (29) , e02269
Modified Julia Olefination Approach to Chiral α‐Fluorovinyl Amino Alcohols and Amino Acids, via Fluorovinyl Oxazolidine Precursors, Conformational and Crystallographic Analyses
Synthesis of chiral α‐fluorovinyl β‐aryl/heteroaryl/alkyl amino alcohols was achieved via intermediate 4‐(α‐fluorovinyl) 2,2‐dimethyloxazolidines with stereochemically defined preexisting stereogenic centers, derived from ( S )‐ or ( R )‐serine. Previously unknown 4‐fluorovinyl 2,2‐dimethyloxazolidines with a fluorine atom placed alpha to the oxazolidine were prepared via Julia olefination of tert ‐butyl ( S )‐4‐{( S )‐[benzo[ d ]thiazol‐2‐ylsulfonyl]fluoromethyl}‐2,2‐dimethyloxazolidine‐3‐carboxylate and its ( R , R ) enantiomer, with a series of aldehydes. By choice of conditions, olefinations could be tuned towards Z ‐ or E ‐selectivity. E / Z olefin mixtures with electron‐rich aryl and heteroaryl substituents were isomerized exclusively or predominantly to the Z ‐isomer. N ‐Boc protected β‐aryl/alkyl substituted α‐fluorovinyl amino alcohols were obtained by oxazolidine hydrolysis. To demonstrate utility for synthesis of amino acids, ( R , Z )‐ and ( S , Z )‐ p ‐methoxyphenyl‐ and the ( S , E )‐ p ‐cyanophenyl‐substituted alkenes were subjected to oxidation, which was very challenging. The use of cat. TEMPO/cat. NaOCl/NaClO 2 gave the N ‐Boc protected fluorovinyl amino acids that were converted to their methyl esters. Enantioselective HPLC of the ( S )‐ and ( R )‐ p ‐methoxyphenyl‐substituted products formed at each step of the synthetic sequence indicated that high enantiomeric purity was retained through the entire synthesis. Crystal structures of two fluorovinyl oxazolidines and one amino alcohol provided insight into the solid‐state conformations. NMR and computational analyses were used to obtain insight into plausible solution conformations.
- Open Access
- 29 January 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (5) , 3365-3377
Facile fabrication of a novel chitosan/carboxymethyl cellulose/bentonite/CuO nanocomposite for enhanced photocatalytic and antibacterial applications
In this study, an eco-friendly chitosan/carboxymethyl cellulose/bentonite/CuO nanocomposite (CS/CMC/BN/CuO NC) was synthesized utilizing algal-mediated copper oxide nanoparticles (CuO NPs). The resulting hybrid nanocomposite was thoroughly characterized using advanced techniques, including XRD, FTIR, UV-vis, FE-SEM, HR-TEM, and BET analysis. The photocatalytic activity of the hybrid nanocomposite was assessed by the degradation of brilliant cresyl blue (BCB) dye under visible light irradiation, while the antibacterial activity of the hybrid nanocomposite was evaluated against both Gram-positive and Gram-negative bacterial strains. XRD analysis confirmed the successful synthesis of the hybrid nanocomposite (CS/CMC/BN/CuO NC) with a crystallite size of 9.66 nm. The UV-vis analysis and Tauc plot revealed that the hybrid nanocomposite exhibited an absorbance peak at 249 nm and a band gap of 2.81 eV, respectively. FE-SEM and HR-TEM analysis highlighted its unique broken-tile structure. Furthermore, the hybrid nanocomposite exhibited outstanding photocatalytic performance, achieving 98.38% degradation of BCB dye within 60 min under optimal conditions. The scavenging experiments showed that electrons (e−) and superoxide anion radicals (O2˙−) are the major reactive species involved in the degradation of BCB dye. Additionally, it demonstrated remarkable antibacterial efficacy, showing a 40 mm zone of inhibition (ZOI) against the Gram-negative Pseudomonas aeruginosa strain. The findings indicate that the synthesized CS/CMC/BN/CuO NC holds significant promise for the photodegradation of organic dyes. Furthermore, it exhibits strong antibacterial properties, making it a potential disinfectant for treating wastewater contaminated with pathogenic bacteria.
- 29 January 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (5) , 3365-3377
Open AccessFacile fabrication of a novel chitosan/carboxymethyl cellulose/bentonite/CuO nanocomposite for enhanced photocatalytic and antibacterial applications
In this study, an eco-friendly chitosan/carboxymethyl cellulose/bentonite/CuO nanocomposite (CS/CMC/BN/CuO NC) was synthesized utilizing algal-mediated copper oxide nanoparticles (CuO NPs). The resulting hybrid nanocomposite was thoroughly characterized using advanced techniques, including XRD, FTIR, UV-vis, FE-SEM, HR-TEM, and BET analysis. The photocatalytic activity of the hybrid nanocomposite was assessed by the degradation of brilliant cresyl blue (BCB) dye under visible light irradiation, while the antibacterial activity of the hybrid nanocomposite was evaluated against both Gram-positive and Gram-negative bacterial strains. XRD analysis confirmed the successful synthesis of the hybrid nanocomposite (CS/CMC/BN/CuO NC) with a crystallite size of 9.66 nm. The UV-vis analysis and Tauc plot revealed that the hybrid nanocomposite exhibited an absorbance peak at 249 nm and a band gap of 2.81 eV, respectively. FE-SEM and HR-TEM analysis highlighted its unique broken-tile structure. Furthermore, the hybrid nanocomposite exhibited outstanding photocatalytic performance, achieving 98.38% degradation of BCB dye within 60 min under optimal conditions. The scavenging experiments showed that electrons (e−) and superoxide anion radicals (O2˙−) are the major reactive species involved in the degradation of BCB dye. Additionally, it demonstrated remarkable antibacterial efficacy, showing a 40 mm zone of inhibition (ZOI) against the Gram-negative Pseudomonas aeruginosa strain. The findings indicate that the synthesized CS/CMC/BN/CuO NC holds significant promise for the photodegradation of organic dyes. Furthermore, it exhibits strong antibacterial properties, making it a potential disinfectant for treating wastewater contaminated with pathogenic bacteria.
- Open Access
- 1 May 2024
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 19, 4137-4162
An Eco-Friendly Synthesis Approach for Enhanced Photocatalytic and Antibacterial Properties of Copper Oxide Nanoparticles Using Coelastrella terrestris Algal Extract
Background: In the current scenario, the synthesis of nanoparticles (NPs) using environmentally benign methods has gained significant attention due to their facile processes, cost-effectiveness, and eco-friendly nature. Methods: In the present study, copper oxide nanoparticles (CuO NPs) were synthesized using aqueous extract of Coelastrella terrestris algae as a reducing, stabilizing, and capping agent. The synthesized CuO NPs were characterized by X-ray diffraction (XRD), UV-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), and field emission scanning electron microscopy (FE-SEM) coupled with energy-dispersive X-ray spectroscopy (EDS). Results: XRD investigation revealed that the biosynthesized CuO NPs were nanocrystalline with high-phase purity and size in the range of 4.26 nm to 28.51 nm. FTIR spectra confirmed the existence of secondary metabolites on the surface of the synthesized CuO NPs, with characteristic Cu–O vibrations being identified around 600 cm− 1, 496 cm− 1, and 440 cm− 1. The FE-SEM images predicted that the enhancement of the algal extract amount converted the flattened rice-like structures of CuO NPs into flower petal-like structures. Furthermore, the degradation ability of biosynthesized CuO NPs was investigated against Amido black 10B (AB10B) dye. The results displayed that the optimal degradation efficacy of AB10B dye was 94.19%, obtained at 6 pH, 50 ppm concentration of dye, and 0.05 g dosage of CuO NPs in 90 min with a pseudo-first-order rate constant of 0.0296 min− 1. The CuO-1 NPs synthesized through algae exhibited notable antibacterial efficacy against S. aureus with a zone of inhibition (ZOI) of 22 mm and against P. aeruginosa with a ZOI of 17 mm. Conclusion: Based on the findings of this study, it can be concluded that utilizing Coelastrella terrestris algae for the synthesis of CuO NPs presents a promising solution for addressing environmental contamination.
- 1 May 2024
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 19, 4137-4162
Open AccessAn Eco-Friendly Synthesis Approach for Enhanced Photocatalytic and Antibacterial Properties of Copper Oxide Nanoparticles Using Coelastrella terrestris Algal Extract
Background: In the current scenario, the synthesis of nanoparticles (NPs) using environmentally benign methods has gained significant attention due to their facile processes, cost-effectiveness, and eco-friendly nature. Methods: In the present study, copper oxide nanoparticles (CuO NPs) were synthesized using aqueous extract of Coelastrella terrestris algae as a reducing, stabilizing, and capping agent. The synthesized CuO NPs were characterized by X-ray diffraction (XRD), UV-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), and field emission scanning electron microscopy (FE-SEM) coupled with energy-dispersive X-ray spectroscopy (EDS). Results: XRD investigation revealed that the biosynthesized CuO NPs were nanocrystalline with high-phase purity and size in the range of 4.26 nm to 28.51 nm. FTIR spectra confirmed the existence of secondary metabolites on the surface of the synthesized CuO NPs, with characteristic Cu–O vibrations being identified around 600 cm− 1, 496 cm− 1, and 440 cm− 1. The FE-SEM images predicted that the enhancement of the algal extract amount converted the flattened rice-like structures of CuO NPs into flower petal-like structures. Furthermore, the degradation ability of biosynthesized CuO NPs was investigated against Amido black 10B (AB10B) dye. The results displayed that the optimal degradation efficacy of AB10B dye was 94.19%, obtained at 6 pH, 50 ppm concentration of dye, and 0.05 g dosage of CuO NPs in 90 min with a pseudo-first-order rate constant of 0.0296 min− 1. The CuO-1 NPs synthesized through algae exhibited notable antibacterial efficacy against S. aureus with a zone of inhibition (ZOI) of 22 mm and against P. aeruginosa with a ZOI of 17 mm. Conclusion: Based on the findings of this study, it can be concluded that utilizing Coelastrella terrestris algae for the synthesis of CuO NPs presents a promising solution for addressing environmental contamination.
- Open Access
- 18 September 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (40) , 28179-28196
Asterarcys quadricellulare algae-mediated copper oxide nanoparticles as a robust and recyclable catalyst for the degradation of noxious dyes from wastewater
The present article explores the synthesis of copper oxide nanoparticles (CuO NPs) utilizing Asterarcys quadricellulare algal extract and examines the effect of various reaction parameters on the size and morphology of the nanoparticles.
- 18 September 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (40) , 28179-28196
Open AccessAsterarcys quadricellulare algae-mediated copper oxide nanoparticles as a robust and recyclable catalyst for the degradation of noxious dyes from wastewater
The present article explores the synthesis of copper oxide nanoparticles (CuO NPs) utilizing Asterarcys quadricellulare algal extract and examines the effect of various reaction parameters on the size and morphology of the nanoparticles.
- 6 July 2023
- Published by Elsevier
- p. 293-310
Polymer blend nanocomposites of fullerene for energy storage
- 6 July 2023
- Published by Elsevier
- p. 293-310
Polymer blend nanocomposites of fullerene for energy storage
- 4 October 2022
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 41 (5) , 640-652
Efficient antibacterial activity in copper oxide nanoparticles biosynthesized via Jasminum sambac flower extract
The objective of the present study is to develop, a hitherto unreported, novel, and sustainable protocol to synthesize copper oxide nanoparticles (CuO NPs) using Jasminum sambac flower extract. CuO NPs of diverse shapes and sizes were obtained using four different copper salt precursors, namely copper sulfate pentahydrate, copper chloride dihydrate, copper nitrate trihydrate, and copper acetate monohydrate while maintaining similar synthetic conditions. XRD analysis reveals that the crystallite sizes of NPs are in the range of 5.25–55.01 nm. FTIR has predicted that biomolecules serve as stabilizing as well as capping agents during the nucleation of NPs. The presence of broad absorption peaks, resulting from surface plasmon resonance, was observed in UV-Vis spectra. The FE-SEM images depicted the diverse morphologies of NPs, which were actually governed by the copper salt precursors. The EDS investigations endorse the dominant peaks corresponding to Cu and O. The analysis of antimicrobial activity was carried out to confirm their aptitude for biomedical applications. It was found that the analogy between the shape of bacteria and that of nanostructure resulted in efficient anti-bacterial activity. The toggle-shaped NPs of CuO derived out of copper sulfate precursor exhibited the best antibacterial activity.
- 4 October 2022
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 41 (5) , 640-652
Efficient antibacterial activity in copper oxide nanoparticles biosynthesized via Jasminum sambac flower extract
The objective of the present study is to develop, a hitherto unreported, novel, and sustainable protocol to synthesize copper oxide nanoparticles (CuO NPs) using Jasminum sambac flower extract. CuO NPs of diverse shapes and sizes were obtained using four different copper salt precursors, namely copper sulfate pentahydrate, copper chloride dihydrate, copper nitrate trihydrate, and copper acetate monohydrate while maintaining similar synthetic conditions. XRD analysis reveals that the crystallite sizes of NPs are in the range of 5.25–55.01 nm. FTIR has predicted that biomolecules serve as stabilizing as well as capping agents during the nucleation of NPs. The presence of broad absorption peaks, resulting from surface plasmon resonance, was observed in UV-Vis spectra. The FE-SEM images depicted the diverse morphologies of NPs, which were actually governed by the copper salt precursors. The EDS investigations endorse the dominant peaks corresponding to Cu and O. The analysis of antimicrobial activity was carried out to confirm their aptitude for biomedical applications. It was found that the analogy between the shape of bacteria and that of nanostructure resulted in efficient anti-bacterial activity. The toggle-shaped NPs of CuO derived out of copper sulfate precursor exhibited the best antibacterial activity.
- 1 September 2022
- Published by Wiley in Asian Journal of Organic Chemistry
- Vol. 11 (9)
Cover Feature: Recent Developments in Nucleophilic Fluorination with Potassium Fluoride (KF): A Review (Asian J. Org. Chem. 9/2022)
- 1 September 2022
- Published by Wiley in Asian Journal of Organic Chemistry
- Vol. 11 (9)
Cover Feature: Recent Developments in Nucleophilic Fluorination with Potassium Fluoride (KF): A Review (Asian J. Org. Chem. 9/2022)
- 18 August 2022
- Published by Wiley in Asian Journal of Organic Chemistry
- Vol. 11 (9)
Recent Developments in Nucleophilic Fluorination with Potassium Fluoride (KF): A Review
Fluorinated compounds act as a link between synthetic organic chemistry and medicinal chemistry and compel researchers to explore modified and innovative methods for the syntheses of fluorinated motifs. The identification of reliable and efficient methods for the fluorination of organic moieties remains a major challenge in synthetic organic chemistry. Nucleophilic fluorination reactions using a combination of potassium fluoride (KF) and various catalysts or promoters emerged as a viable strategy and provided access to versatile organofluorine compounds. This review will emphasize recent advancements in nucleophilic fluorination reactions using KF: aliphatic nucleophilic fluorination, aromatic nucleophilic fluorination, and heteroatomic nucleophilic fluorination with ionic liquids, modified crown ethers, and transition metal‐catalysts in various protic and aprotic media.
- 18 August 2022
- Published by Wiley in Asian Journal of Organic Chemistry
- Vol. 11 (9)
Recent Developments in Nucleophilic Fluorination with Potassium Fluoride (KF): A Review
Fluorinated compounds act as a link between synthetic organic chemistry and medicinal chemistry and compel researchers to explore modified and innovative methods for the syntheses of fluorinated motifs. The identification of reliable and efficient methods for the fluorination of organic moieties remains a major challenge in synthetic organic chemistry. Nucleophilic fluorination reactions using a combination of potassium fluoride (KF) and various catalysts or promoters emerged as a viable strategy and provided access to versatile organofluorine compounds. This review will emphasize recent advancements in nucleophilic fluorination reactions using KF: aliphatic nucleophilic fluorination, aromatic nucleophilic fluorination, and heteroatomic nucleophilic fluorination with ionic liquids, modified crown ethers, and transition metal‐catalysts in various protic and aprotic media.
- 1 January 2022
- Published by Springer Nature
- p. 489-508
Copper-Based Polymer Nanocomposites: Application as Sensors
- 1 January 2022
- Published by Springer Nature
- p. 489-508
Copper-Based Polymer Nanocomposites: Application as Sensors