Oleg Blyashenko
Oleg Blyashenko has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Vasyl Servatyuk
Національний університет оборони України імені Івана Черняховського
2 shared publications - А. В. Пруський
Інститут державного управління та наукових досліджень з цивільного захисту
2 shared publications - Alexandr Soshinskiy1 shared publication
- Artem Maiboroda
National University of Civil Protection of Ukraine
1 shared publication - Ihor Khmyrov
National University of Civil Protection of Ukraine, Kharkiv, Ukraine
1 shared publication - Mykhailo Kropyva
Національний університет цивільного захисту України, Україна
1 shared publication
Latest Publications
- Open Access
- 1 January 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 24 (1) , 84-92
Protective Disposable Face Masks Used During the COVID-19 Pandemic as a Source of Pollutants in the Aquatic Environment – A Study of Short-Term Effects
The paper examines the impact of protective equipment used during the COVID-19 pandemic on the environment. The impact of protective face masks on the aquatic environment was analyzed in more detailed way. The amount of protective face masks penetrated into the environment as a result of the...
- 1 January 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 24 (1) , 84-92
Open AccessProtective Disposable Face Masks Used During the COVID-19 Pandemic as a Source of Pollutants in the Aquatic Environment – A Study of Short-Term Effects
The paper examines the impact of protective equipment used during the COVID-19 pandemic on the environment. The impact of protective face masks on the aquatic environment was analyzed in more detailed way. The amount of protective face masks penetrated into the environment as a result of the...
- Open Access
- 14 December 2022
- Published by National University of Civil Protection of Ukraine in Scientific bulletin: Сivil protection and fire safety
- No. 2(14),p. 108-121
МЕТОДИКА ОБҐРУНТУВАННЯ ОПЕРАТИВНО-ТЕХНІЧНИХ РЕКОМЕНДАЦІЙ ЩОДО СКОРОЧЕННЯ ЧАСУ ПІДВОДНОГО РОЗМІНУВАННЯ ВОДОЛАЗАМИ-САПЕРАМИ ДЕРЖАВНОЇ СЛУЖБИ УКРАЇНИ З НАДЗВИЧАЙНИХ СИТУАЦІЙ
Згідно з аналізом важливою та нерозв’язаною частиною проблеми підвищення ефективності попередження надзвичайних ситуацій, пов’язаних із підводним розташуванням вибухонебезпечних предметів, є відсутність методики обґрунтування оперативно-технічних рекомендацій щодо скорочення часу підводного розмінування водолазами-саперами ДСНС України без зниження рівня безпеки особового складу. Застосування системного ергономічного аналізу для представлення діяльності водолаза-сапера у вигляді функціонування системи «водолаз-сапер – технічне забезпечення підводного розмінування – підводне розташування вибухонебезпечного предмета», статистичних методів планування експериментальних досліджень та обробки отриманих результатів,а також математико-статистичних методів безпосередніх експертних оцінок дало змогу розробити методику, основу якої складає багатофакторна математична модель підводного розмінування водолазами-саперами ДСНС України. Методика являє собою сукупність таких послідовних дій: вибір варіантів оперативної діяльності (виділені такі значущі фактори, як рівень підготовленості водолаза-сапера; умови підводного середовища, в яких працює особовий склад; рівень їх оснащеності); безпосередня експертна оцінка часу виконання вибраних варіантів відповідно до плану 3х3х2 з урахуванням узгодженості експертів; визначення параметрів моделей підводного розмінування за допомогою стандартних формул теорії планування експериментів та перевірка їх достовірності через порівняння того, наскільки натурні результати, отримані в умовах, які відповідають конкретній комбінації вибраних факторів, укладаються в довірчі інтервали, що розраховані з надійністю 0,95 за результатами застосування багатофакторних математичних моделей підводного розмінування з конкретними параметрами; аналіз та спрощення моделей з подальшим ранжуванням факторів як в центрі факторного простору, так і на його краях; обґрунтування рекомендацій, які мають оперативно-технічний характер, оскільки вибрані фактори характеризували як оперативну (роботу особового складу в умовах впливу навколишнього середовища), так і технічну складові процесу підводного розмінування та їх упровадження.
- 14 December 2022
- Published by National University of Civil Protection of Ukraine in Scientific bulletin: Сivil protection and fire safety
- No. 2(14),p. 108-121
Open AccessМЕТОДИКА ОБҐРУНТУВАННЯ ОПЕРАТИВНО-ТЕХНІЧНИХ РЕКОМЕНДАЦІЙ ЩОДО СКОРОЧЕННЯ ЧАСУ ПІДВОДНОГО РОЗМІНУВАННЯ ВОДОЛАЗАМИ-САПЕРАМИ ДЕРЖАВНОЇ СЛУЖБИ УКРАЇНИ З НАДЗВИЧАЙНИХ СИТУАЦІЙ
Згідно з аналізом важливою та нерозв’язаною частиною проблеми підвищення ефективності попередження надзвичайних ситуацій, пов’язаних із підводним розташуванням вибухонебезпечних предметів, є відсутність методики обґрунтування оперативно-технічних рекомендацій щодо скорочення часу підводного розмінування водолазами-саперами ДСНС України без зниження рівня безпеки особового складу. Застосування системного ергономічного аналізу для представлення діяльності водолаза-сапера у вигляді функціонування системи «водолаз-сапер – технічне забезпечення підводного розмінування – підводне розташування вибухонебезпечного предмета», статистичних методів планування експериментальних досліджень та обробки отриманих результатів,а також математико-статистичних методів безпосередніх експертних оцінок дало змогу розробити методику, основу якої складає багатофакторна математична модель підводного розмінування водолазами-саперами ДСНС України. Методика являє собою сукупність таких послідовних дій: вибір варіантів оперативної діяльності (виділені такі значущі фактори, як рівень підготовленості водолаза-сапера; умови підводного середовища, в яких працює особовий склад; рівень їх оснащеності); безпосередня експертна оцінка часу виконання вибраних варіантів відповідно до плану 3х3х2 з урахуванням узгодженості експертів; визначення параметрів моделей підводного розмінування за допомогою стандартних формул теорії планування експериментів та перевірка їх достовірності через порівняння того, наскільки натурні результати, отримані в умовах, які відповідають конкретній комбінації вибраних факторів, укладаються в довірчі інтервали, що розраховані з надійністю 0,95 за результатами застосування багатофакторних математичних моделей підводного розмінування з конкретними параметрами; аналіз та спрощення моделей з подальшим ранжуванням факторів як в центрі факторного простору, так і на його краях; обґрунтування рекомендацій, які мають оперативно-технічний характер, оскільки вибрані фактори характеризували як оперативну (роботу особового складу в умовах впливу навколишнього середовища), так і технічну складові процесу підводного розмінування та їх упровадження.
- Open Access
- 31 August 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (5 (118)) , 30-36
Optimization of the technology for designing sensitive gas sensors based on zinc oxide using a sol-gel method
This paper has investigated the nanostructured samples of zinc oxide intended for use as a gas sensor. Experimental samples were obtained by the economical sol-gel method, suitable for large-scale production. The dependence of the efficiency of gas sensors based on zinc oxide on temperature was established. The electrical properties of experimental samples were investigated in the air in the range of values of the initial voltage of 5–30 V and at temperatures of 320, 370, and 450 K. It was established that the current-voltage characteristic for nanosized zinc oxide is non-ohmic, but the nature of the curves can change due to an increase in the operating temperature. The obtained experimental dependences are explained by the peculiarities of the morphology of the obtained nanostructured zinc oxide, which affects the value of the contact resistance in the structure. A large number of nanoscale particles leads to an increase in the number of energy barriers, which negatively affects the sensitivity of experimental samples to the gaseous medium. The study of the sensitivity of samples to the established gaseous medium, namely 100 ppm CO, was carried out. The electrical conductivity of zinc oxide is determined by oxygen vacancies that are electron donors, and, accordingly, the conductivity activation energy is determined by the donor levels formed by vacancies in the ZnO forbidden zone. During heating, there is a decrease in the resistance of the sample with increasing temperature; electrical conductivity is determined by the thermal generation of electrons. Understanding the dependence of the sensor sensitivity on temperature and the use of sensitive ZnO layers of different morphology will make it possible to recognize gaseous components in a complex mixture.
- 31 August 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (5 (118)) , 30-36
Open AccessOptimization of the technology for designing sensitive gas sensors based on zinc oxide using a sol-gel method
This paper has investigated the nanostructured samples of zinc oxide intended for use as a gas sensor. Experimental samples were obtained by the economical sol-gel method, suitable for large-scale production. The dependence of the efficiency of gas sensors based on zinc oxide on temperature was established. The electrical properties of experimental samples were investigated in the air in the range of values of the initial voltage of 5–30 V and at temperatures of 320, 370, and 450 K. It was established that the current-voltage characteristic for nanosized zinc oxide is non-ohmic, but the nature of the curves can change due to an increase in the operating temperature. The obtained experimental dependences are explained by the peculiarities of the morphology of the obtained nanostructured zinc oxide, which affects the value of the contact resistance in the structure. A large number of nanoscale particles leads to an increase in the number of energy barriers, which negatively affects the sensitivity of experimental samples to the gaseous medium. The study of the sensitivity of samples to the established gaseous medium, namely 100 ppm CO, was carried out. The electrical conductivity of zinc oxide is determined by oxygen vacancies that are electron donors, and, accordingly, the conductivity activation energy is determined by the donor levels formed by vacancies in the ZnO forbidden zone. During heating, there is a decrease in the resistance of the sample with increasing temperature; electrical conductivity is determined by the thermal generation of electrons. Understanding the dependence of the sensor sensitivity on temperature and the use of sensitive ZnO layers of different morphology will make it possible to recognize gaseous components in a complex mixture.