OVOleksandr Vudvud

Oleksandr Vudvud

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oleksandr Vudvud has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Probabilistic–Experimental Assessment of Parametric Reliability of Friction Pairs in Braking Systems of Lifting and Transportation Machinery

    by Natalia Fidrovska, Dmytro Volchenko, Ivan Kernytskyy, Ruslan Humeniuk, Andrii Sharybura, Dmytro Zhuravlov, Andrii Voznyi, Oleksandr Vudvud, Oleksandr Semeniy, Anna Markiewicz, et al.

    This study provides a computational and experimental assessment of the parametric reliability of friction pairs in brake devices for lifting and transport technology. The computational and experimental method for assessing the parametric reliability of various friction units in lifting and transport equipment, based on operational and experimental research data with their permissible dynamic and thermal load of disc-drum and band-shoe brake devices, was developed to evaluate the influence of coupled dynamic and thermal loads on brake friction pair reliability. The operational parameters of the band-shoe brake, considered as a multi-pair friction system, were classified into four functional groups. The external operational parameters of their materials are determined, and the relationship between dynamic and thermal processes, phenomena and effects is established. A new quantitative indicator, the relative coefficient of parameter (RCP), was introduced to characterize the stochastic variability in friction pair performance and to assess parametric reliability. The meaning of parametric reliability for friction pairs is revealed with the subsequent classification of parameters that fit into the structural diagram of its computational and experimental assessment. Based on reliability conditions, the optimal thickness of the transverse or longitudinal section of the metal friction element has been determined, ensuring it does not exceed the permissible level of thermal stress. Experimental investigations of drilling rig winch brakes demonstrated that the RCP values ranged from 0.008 to 0.051 depending on operating conditions. The proposed probabilistic model enables the optimization of metal friction element dimensions while maintaining thermal stresses below critical levels.

  • Open Access

    INCREASING THE EFFICIENCY OF BRAKING FRICTION PAIRS

    by Dmytro Volchenko, Dmytro Zhuravlov, Andrii Voznyi, Oleksandr Vudvud, Yevhen Andreychikov, Olga Vasylyshyn

    Theoretical and experimental studies of narrow friction linings with reduced working surfaces in drum-shoe brake friction pairs have revealed and applied the following.Specific loads are quasi-equalized by significantly reducing the advancing and trailing areas of the lining surfaces.The overall dynamic coefficient of mutual overlap of friction pairs during operation of narrow linings has been increased, stabilizing the temperature and gradients on their surfaces, as well as the dynamic friction coefficients.A new method for fastening narrow linings in friction units significantly reduces the time required to install and remove them from brake shoes.

  • DESIGN OF AN EFFICIENT CHAMBERED DISC-PAD BRAKE

    by O. Volchenko, A. Voznyi, O. Vudvud, O. Semeniy, Ye. Andreychikov

    The materials of the article consider the optimization design of friction pairs of a chamber-type disc-shoe brake taking into account the restrictions on the design and operational parameters. The design and operation of a chamber disc-shoe brake of a drilling winch are presented, with a brake disk consisting of two half-disks of variable thickness, the larger of which corresponds to the maximum radius of the friction zone, and the smaller one to its minimum radius. As a heat carrier in the disk chamber in the cooling system, low-melting Li in the form of a powder mixed with water was used. Using the force method, the inertia forces, radial and tangential forces acting on the chamber disk and nanofluid in the volume of the chamber were determined. The stress-strain state of the disk was simulated to study mechanical and thermal stresses using the Ansys Workbench program. The values of the maximum equivalent stresses and stress gradients along the thickness of the chamber disk were determined and analyzed. The efficiency of nanofluid cooling was assessed using the thermal balance of the chamber disk. The thermal balance was assessed during forced air and forced nanofluid cooling of a metal friction element. Experimental and design developments, theoretical studies, and a full-scale computational experiment on a new type of chamber disc-pad brake with nanofluid cooling allowed us to establish the regularities of changes in operational parameters in the form of graphical dependencies. The main operational and heat exchange parameters of the serial and developed disc-pad brake of a drilling winch were compared. The wear and friction properties of friction pairs were improved by operating the brake in a temperature range lower than that permissible for the friction lining material, and, as a result, the braking qualities for the lifting shaft of the drilling rig.

  • Open Access

    Stabilization of operating parameters of friction pairs in brake devices

    by Oleksandr Volchenko, Dmytro Volchenko, Dmytro Zhuravlev, Oleksandr Vudvud, Andrii Voznyi, Дмитро Журавльов, Андрій Возний

    Problem. Theoretical and experimental studies of the dynamic and thermal loading of friction pairs of brake devices from the point of view of assessing the stability and stability of their operating parameters allowed us to propose the following. The efficiency of the friction unit of band-pad brakes by stabilizing the load of the friction unit based on modeling its stress-strain state and wear in the modes of lowering the drill string and drilling, as well as substantiation of methods for calculating the design and operational parameters of friction pairs of brakes. However, nothing was said about the local problem of stabilizing the operating parameters of friction pairs of brakes. Goal. The purpose of the development is to substantiate the method of generalizing the operating parameters of brake friction pairs for preliminary prediction of fluctuations in their stabilization and stability values. Methodology. Analytical methods were used to study the dynamic and energy load of friction pairs in disc-pad brakes. The efficiency of the brakes and the stabilization of their operating parameters were determined. Results. Based on the elements of the theory of thermal similarity, a method of basic generalized parameters of friction pairs is proposed, relating to their average, maximum and minimum values regarding their stabilization, oscillations and stability, a clear sequence and relationship of the operating parameters of friction pairs of braking devices is determined, temperature gradients of metal friction elements are estimated and their permissible values for calculating heating and forced cooling rates are determined. Originality. The proposed method of generalized operating parameters of brake friction pairs allows predicting them and establishing their oscillations, stability, and elasticity. Practical value. Using this method will increase the efficiency of friction pairs of disc-pad brake devices, as well as improve their wear resistance and frictional properties during cyclic braking

  • Open Access

    ENERGY LOAD CONTROL OF BRAKES' FRICTION PAIRS

    by Oleksandr Volchenko, Natalia Fidrovska, Oleksandr Vudvud, Yevgen Andreychikov, Oleksandr Burava, Vasyl Chufus

    Theoretical research and a computational experiment dedicated to optimal control of thermal processes in friction pairs during frictional interaction in braking devices have allowed us to establish and propose the following. Thermal process control is accomplished mathematically using the heat equation with initial and boundary conditions, employing a control function, as well as the method of thermoelastic potentials and moving local heat sources in brake friction pairs. Material selection based on the mechanical properties of drill drawworks brake pulleys was conducted using a computational experiment. Based on the research conducted, a discovery formula was formulated: "Unknown patterns of microcrack occurrence and development on the working surfaces of metal friction brake elements have been established."

  • Methods to Reduce Dynamic Loads that Occur When Braking of Overhead Cranes Using the Cam-Driven Pad Brake

    by Volodymyr Semenyuk, Oleksandr Vudvud, Valeriy Lingur, Raul Turmanidze

  • Method of Generalized Variable Operational Parameters of a Drilling Winch Disc-Shoe Brake

    by Dmytro Zhuravlov, Oleksandr Vudvud, Andrii Vozny, Mykola Ostashuk, Oleh Kotsiumbas

  • Heat balance of brakes in lifting and transport equipment

    by O. Vudvud

    The article addresses the problem of determining the thermal balance of disc-pad brakes used in lifting and transport machinery based on the analysis of complex heat transfer in friction pairs. The relevance of the study is обусловлена the need to ensure reliable and efficient operation of braking devices within permissible temperature ranges, which directly affects the durability of friction materials and operational safety. It is shown that heat generation during friction has a complex nature and involves the interaction of conductive, convective, and radiative heat transfer, with heat conduction playing a dominant role. Existing methods for evaluating the thermal state of brakes, particularly calorimetric approaches, are analyzed, and their limitations in studying real brake disc structures with complex geometry are substantiated. An approach to assessing the thermal balance is proposed, taking into account the interrelation of all heat transfer components and their influence on the energy loading of metallic friction elements. Special attention is paid to the physical nature of heat generation in the contact zones of surface asperities, where adhesion and deformation processes occur, leading to intense local heating. The mechanisms of heat flow formation are considered, and mathematical descriptions of conduction, convection, and thermal radiation processes are presented. An experimental method for determining the thermal balance of self-ventilated brake discs using embedded thermocouples is proposed. This method allows evaluating temperature distribution and the fraction of heat dissipated by different structural elements. The obtained results make it possible to establish the patterns of heating and cooling of friction elements under various operating conditions, as well as to determine the conditions for achieving a thermally stabilized state. The practical significance of the study lies in the possibility of using the proposed method to improve cooling efficiency and reduce thermal loading of braking systems, thereby increasing the reliability and service life of lifting and transport machinery.

  • Open Access

    КОРОЗІЙНІ ПРОЦЕСИ В ПАРАХ ТЕРТЯ ГАЛЬМ

    by Олександр Вудвуд

    У матеріалах статті розглянуто теоретичні дослідження корозійних процесів у спряженнях пар тертя гальм, що застосовуються в підйомно-транспортній техніці у замкненому та розімкненому стані, Електрохімічна корозія - гетерогенний і багатостадійний процес, спричинений термодинамічною нестійкістю робочих поверхонь пар тертя в даному корозійному середовищі. Основними розрахунковими параметрами корозійних процесів у спряженнях пар тертя гальмівових пристроїв є: локальна зона дії; максимально допустима швидкість; допустима глибина впливу; зношування плям контактів мікровиступів за одиницю часу; втрати маси мікровиступів. Встановлено, що джерелом контактної корозії є: енергетичні рівні матеріалів (трибоефект), повітря і вода, утворення електроліту на робочій поверхні накладки під час деструкції її матеріалів. Пара тертя "метал - полімер" є катодом (-) і анодом (+). Процес електрохімічної корозії являє собою сукупність двох пов'язаних протікаючих реакцій: анодної (окиснення) і катодної (відновлення). Представлено принципову схему електрохімічного руйнування робочої поверхні накладки. Електрохімічна корозія на неоднорідній (гетерогенній) поверхні накладки - аналогічна роботі коротко-замкнутого гальванічного елемента. Виділено такі особливості електрохімічного способу корозії, уявляємо його як два одночасно протікаючі, але значною мірою незалежні електродні процеси: анодний (іонізація накладки) і катодний. Кінетика анодного та катодного процесів, а відтак і швидкість корозії залежать від величини електродного потенціалу металу; електродні процеси локалізуються на різних зонах робочої поверхні накладки, де їх протікання полегшене; встановити матеріальні втрати можливо переважно на анодних зонах поверхні накладки.

  • Open Access

    ДИФУЗІЙНІ ЯВИЩА У ТРИБОСИСТЕМАХ ОХОЛОДЖУВАНИХ ГАЛЬМ

    by Олександр Вольченко, Дмитро Вольченко, Дмитро Журавльов, Євген Андрейчиков, Олександр Бурава, Олександр Вудвуд, Олександр Cеменій, Dmytro Zhuravlev, Yevhen Andreychikov, Oleksandr Semeniy

    У матеріалах статті показано, що на підставі багатофакторного аналізу запропоновані моделі нанорідин, які враховують у базових рідинах: зіткнення між: наночастинками та молекулами; наночастинками, що обумовлені броунівським рухом; теплову дифузію наночастинок та їх взаємодію з молекулами; утворення траєкторій перколяції з низьким теплоємним опором у рідині; вплив: міжфазного та приграничного шарів при розділі твердої та рідкої фаз; ефекту поверхневих оболонок; тонких наношарів; кластеризації частинок. Дослідження нанорідин зводиться до визначення їхнього коефіцієнта теплопровідності. При оцінці дифузії в системах, що обертаються, з нанорідиною враховували сили, різні потоки, швидкості руху, градієнти, питомі об’єми, седиментацію, виникаючі коефіцієнти, руомість наночастинок рідини в камері. Розглянуто взаємодію наночастинок в рідинних системах охолодження, а також оцінені нанорідинні потоки в умовах теплообміну в камері системи охолодження обода шківа.