Francisca Orellana
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francisca Orellana has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Alex Esteban
Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, Valparaíso 2390123, Chile
3 shared publications - Luis Vinnett
Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, Valparaíso 2390123, Chile
3 shared publications - Marcelo Rivera
Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, Valparaíso 2390123, Chile
2 shared publications - Matías Benítez
Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, Valparaíso 2390123, Chile
2 shared publications - Benjamín Urriola
Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, Valparaíso 2390123, Chile
1 shared publication - Camila Guajardo
Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, Valparaíso 2390123, Chile
1 shared publication
Latest Publications
- Open Access
On the Sensitivity of Kinetic Modeling to the Selection of Flotation Intervals in Batch Tests
Batch tests were conducted to recover copper minerals by flotation. Seven intervals (cumulative flotation times) were chosen to characterize flotation kinetics in terms of maximum recoveries, R∞, and flotation rate distributions, f(k). The responses were subsampled, removing one datapoint at a time to obtain seven datasets with six time-recovery datapoints. The main objective of this subsampling procedure was to assess the sensitivity of the R∞–f(k) estimates to moderate changes and arbitrary selection of flotation intervals in batch tests. These datasets were fitted to the Single Flotation Rate (SFR), Rectangular, and Gamma models. The R∞–f(k) pairs proved to be sensitive to changes in the flotation intervals, particularly under poor model fitting and noisy kinetic responses. The former was observed with the SFR model in all cases and with the Rectangular model in one test, whereas the latter was observed with the Gamma model for the noisiest kinetic response, showing a trend to overfitting. A simplified scale-up procedure was performed, showing significant uncertainties in the predicted recoveries when the R∞–f(k) pairs were strongly influenced by different flotation intervals. The scale-up results presented a variability that was directly justified by the R∞–f(k) uncertainties, caused by the arbitrary selection of flotation intervals in the batch tests. The analysis highlights the need for more robust experimental designs in kinetic characterizations, particularly for the prediction of metallurgical results at a large scale.
Open AccessOn the Sensitivity of Kinetic Modeling to the Selection of Flotation Intervals in Batch Tests
Batch tests were conducted to recover copper minerals by flotation. Seven intervals (cumulative flotation times) were chosen to characterize flotation kinetics in terms of maximum recoveries, R∞, and flotation rate distributions, f(k). The responses were subsampled, removing one datapoint at a time to obtain seven datasets with six time-recovery datapoints. The main objective of this subsampling procedure was to assess the sensitivity of the R∞–f(k) estimates to moderate changes and arbitrary selection of flotation intervals in batch tests. These datasets were fitted to the Single Flotation Rate (SFR), Rectangular, and Gamma models. The R∞–f(k) pairs proved to be sensitive to changes in the flotation intervals, particularly under poor model fitting and noisy kinetic responses. The former was observed with the SFR model in all cases and with the Rectangular model in one test, whereas the latter was observed with the Gamma model for the noisiest kinetic response, showing a trend to overfitting. A simplified scale-up procedure was performed, showing significant uncertainties in the predicted recoveries when the R∞–f(k) pairs were strongly influenced by different flotation intervals. The scale-up results presented a variability that was directly justified by the R∞–f(k) uncertainties, caused by the arbitrary selection of flotation intervals in the batch tests. The analysis highlights the need for more robust experimental designs in kinetic characterizations, particularly for the prediction of metallurgical results at a large scale.
- Open Access
- 28 April 2025
- Published by MDPI AG in Preprints.org
On the Sensitivity of Kinetic Modelling to the Selection of Flotation Intervals in Batch Flotation
Batch flotation tests were conducted to recover copper minerals by flotation. Seven flotation intervals (cumulative flotation times) were chosen to characterize flotation kinetics in terms of maximum recoveries, R∞, and flotation rate distributions, f(k). The responses were subsampled, removing one datapoint at a time to obtain seven datasets with six time-recovery data. These datasets were fitted to the Single Flotation Rate, Rectangular and Gamma models. The R∞-f(k) pairs proved to be sensitive to changes in the flotation intervals, particularly under poor model fitting. A simplified scale-up procedure was performed, showing significant uncertainties in the predicted recoveries when the R∞-f(k) pairs were strongly influenced by different flotation intervals.
- 28 April 2025
- Published by MDPI AG in Preprints.org
Open AccessOn the Sensitivity of Kinetic Modelling to the Selection of Flotation Intervals in Batch Flotation
Batch flotation tests were conducted to recover copper minerals by flotation. Seven flotation intervals (cumulative flotation times) were chosen to characterize flotation kinetics in terms of maximum recoveries, R∞, and flotation rate distributions, f(k). The responses were subsampled, removing one datapoint at a time to obtain seven datasets with six time-recovery data. These datasets were fitted to the Single Flotation Rate, Rectangular and Gamma models. The R∞-f(k) pairs proved to be sensitive to changes in the flotation intervals, particularly under poor model fitting. A simplified scale-up procedure was performed, showing significant uncertainties in the predicted recoveries when the R∞-f(k) pairs were strongly influenced by different flotation intervals.
- Open Access
Reducing the Presence of Clusters in Bubble Size Measurements for Gas Dispersion Characterizations
This short communication evaluates a new strategy to sample bubbles in gas dispersion characterizations. Bubble size is measured in a bidimensional flotation cell using the McGill bubble size analyzer under different types of frothers, frother concentrations and superficial gas rates. The original design of this bubble viewer is modified, changing the deflecting system to photograph only a fraction of the bubbles entering the device. As a result, the new design increases the ability to successfully identify bubbles by a maximum of 20% using an automated algorithm. This increase is caused by a reduction in the formation of clusters in the visual field. The improvement, which is a function of the operating conditions, is most significant in the transition from ellipsoidal/ellipsoidal–turbulent regimes (no frother or low frother concentrations) to conditions with an over-agglomeration of bubbles in the visual field (high superficial gas rates and high frother concentrations). A comparison of the bubble size parameters obtained from the original and proposed deflecting systems shows that the new design does not distort the estimated bubble size distributions. To complement the research findings, alternative sampling designs, using new or existing segmentation algorithms, are then proposed to improve gas dispersion characterizations at different scales.
Open AccessReducing the Presence of Clusters in Bubble Size Measurements for Gas Dispersion Characterizations
This short communication evaluates a new strategy to sample bubbles in gas dispersion characterizations. Bubble size is measured in a bidimensional flotation cell using the McGill bubble size analyzer under different types of frothers, frother concentrations and superficial gas rates. The original design of this bubble viewer is modified, changing the deflecting system to photograph only a fraction of the bubbles entering the device. As a result, the new design increases the ability to successfully identify bubbles by a maximum of 20% using an automated algorithm. This increase is caused by a reduction in the formation of clusters in the visual field. The improvement, which is a function of the operating conditions, is most significant in the transition from ellipsoidal/ellipsoidal–turbulent regimes (no frother or low frother concentrations) to conditions with an over-agglomeration of bubbles in the visual field (high superficial gas rates and high frother concentrations). A comparison of the bubble size parameters obtained from the original and proposed deflecting systems shows that the new design does not distort the estimated bubble size distributions. To complement the research findings, alternative sampling designs, using new or existing segmentation algorithms, are then proposed to improve gas dispersion characterizations at different scales.