KTKrystian Teler

Krystian Teler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Krystian Teler has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of Open-Loop Current Estimators for Current Sensor Fault Compensation in PMSM Motor Drive

    by Krystian Teler

    The growing demand for fault-tolerant systems requires the use of algorithms that will maintain continuity of operation in the event of faults, e.g., in measuring sensors. Sensorless control methods, originally developed for electric motor drives without speed measurements, can be applied within fault-tolerant control (FTC) strategies when speed sensors fail. Recent research also increasingly addresses failures of current sensors (CS). This study proposes a permanent magnet synchronous motor (PMSM) drive control method based on a current-sensorless vector control structure, eliminating the need to measure phase currents and enabling compensation for damaged CS. Three open-loop estimator types derived from a PMSM mathematical model are introduced, all operating without feedback from state variables. The first estimator uses fixed design parameters optimized via particle swarm optimisation (PSO). The second relies on the relationship between stator flux and dq-axis currents. The third extends this relationship by incorporating rotor position to account for spatial harmonics. The relevant flux functions are stored in look-up tables (LUTs). This study discusses challenges in selecting estimator parameters and issues related to voltage and speed measurement. The proposed solutions were tested on a 2.5 kW PMSM experimental setup across a wide range of operating conditions.


  • Impact of PWM Strategy on Current Estimation Quality in Induction Motor Drive System

    by Krystian Teler, Michał Adamczyk, Teresa Orlowska-Kowalska

    In modern electric drives, the aim is to provide the best possible control while ensuring safe operation. Diagnostic methods that are used for the latter purpose require the use of signals to identify failures in the operation of the drive. For this reason, methods are being developed that reproduce state variables with high accuracy. One signal that can be estimated is the stator phase current, which should be known in any control structure of the electric motors, especially in the case of current sensor fault. However, current estimators based on the mathematical model of the motor are sensitive to incorrect identification of object parameters. One method to improve the quality of estimation is to use an inverter dead-time compensation algorithm. However, there is a lack of research on the effect of the chosen pulse-width modulation (PWM) technique on the performance of the current estimator. This article presents the results of such a study, which was conducted on a laboratory test bench in a drive system with an induction motor. The effect of ten different modulation techniques on the quality of stator current estimation in a drive system with inverter dead-time compensation taken into account was studied. The results confirm that the selection of an appropriate PWM modulation strategy can improve the quality of estimation by up to 36.7 % over the commonly used space-vector PWM (SVPWM). The results of the study can be the basis for the development of algorithms to improve the quality of stator current estimation over a wide range of drive operating points.

  • Open Access

    Verification of MLP network-based current sensor fault classifier for vector-controlled AC motor drives

    by Krystian Teler, Maciej Skowron, Teresa Orłowska-Kowalska

    In modern drive systems, the aim is to ensure their operational safety. Damage can occur not only to the components of the motor itself but also to the power electronic devices included in the frequency converter and sensors in the measurement circuit. Critical damage to the electric drive that makes its further exploitation impossible can be prevented by using fault-tolerant control (FTC) algorithms. These algorithms are very often combined with diagnostic methods that assess the degree and type of damage. In this paper, a fault classification algorithm using an artificial neural network (ANN) is analyzed for stator phase current sensors in AC motor drives. The authors confirm that the investigated classification algorithm works equally well on two different AC motors without the need for significant modifications, such as retraining the neural network when transferring the algorithm to another object. The method uses a stator current estimator to replace faulty sensor measurements in a vector control structure. The measured and estimated currents are then subjected to a classification process using a multilayer perceptron (MLP), which has the advantage of small structure size as compared to deep learning structures. The uniqueness of the method lies in the use of data in the training set that are not dependent on the parameters of a specific motor. Four types of current sensor faults were studied, namely total signal loss, gain error, offset and signal saturation. Simulations were performed in a MATLAB/SIMULINK environment for drive systems with an induction motor (IM) and a permanent magnet synchronous motor (PMSM). The results show that the algorithm correctly evaluates the type of damage in more than 99.6% of cases regardless of the type of motor. Therefore, the results presented here may help to develop universal diagnostic methods that will work on a wide variety of motors.


  • Implementation of MLP-Based Classifier of Current Sensor Faults in Vector-Controlled Induction Motor Drive

    by Krystian Teler, Maciej Skowron, Teresa Orłowska-Kowalska

    This article deals with the neural networks (NN)-based classification of current sensor (CS) faults in an induction motor drive system designed according to the idea of fault-tolerant control (FTC). The CS-FTC system ensures continued system functionality, even after a failure has occurred, not only through its ability to detect and isolate faults but also through its ability to compensate for them. The article focuses on the development of the technical implementation of a CS faults classifier based on NN in considering the problem. The proposed method uses the principle structure of a multilayer perceptron (MLP) based on single samples of the stator phase current signal. The tests demonstrate techniques that allow the development of NN input vectors while eliminating the constraints resulting from the machine's operating conditions (load change, rotational speed change). In addition, the possibility of optimizing the input vector of the network in terms of the analyzed damages is demonstrated by using harmonic analysis. The article shows the possibility of full use of the mathematical model in the practical implementation of diagnostic systems implemented on a real object. MLP aims to determine the CS fault category (no fault, gain change, offset, saturation, open circuit) and fault localization (phase A or B). The experimental verification on a laboratory stand with an induction motor of 1.1 kW confirmed the efficiency of the proposed method in 97.2% of the cases.


  • Open Access

    Analysis of the Stator Current Prediction Capabilities in Induction Motor Drive Using the LSTM Network

    by Krystian Teler, Teresa Orłowska-Kowalska

    In modern areas of knowledge related to electric drive automation, there is often a need to predict the state variables of the drive system state variables, such as phase current and voltage, electromagnetic torque, stator and rotor flux, and others. This need arises mainly from the use of predictive control algorithms but also from the need to monitor the state of the drive to diagnose possible faults that have not yet occurred but may occur in the future. This paper presents a method for predicting stator phase current signals using a network composed of long-short-term memory units, allowing the simultaneous prediction of two signals. The developed network was trained on a set of current signals generated by software. Its operation was verified by simulation tests in a direct rotor flux-oriented control (DRFOC) structure for an induction motor drive in the Matlab/Simulink environment. An important property of this method is the possibility of obtaining a filtering action on the output of the network, whose intensity can be controlled by varying the sampling frequency of the training signals.


  • Open Access

    Classification of Single Current Sensor Failures in Fault-Tolerant Induction Motor Drive Using Neural Network Approach

    by Maciej Skowron, Krystian Teler, Michal Adamczyk, Teresa Orlowska-Kowalska

    In the modern induction motor (IM) drive system, the fault-tolerant control (FTC) solution is becoming more and more popular. This approach significantly increases the security of the system. To choose the best control strategy, fault detection (FD) and fault classification (FC) methods are required. Current sensors (CS) are one of the measuring devices that can be damaged, which in the case of the drive system with IM precludes the correct operation of vector control structures. Due to the need to ensure current feedback and the operation of flux estimators, it is necessary to immediately compensate for the detected damage and classify its type. In the case of the IM drives, there are individual suggestions regarding methods of classifying the type of CS damage during drive operation. This article proposes the use of the classical multilayer perceptron (MLP) neural network to implement the CS neural fault classifier. The online work of this classifier was coordinated with the active FTC structure, which contained an algorithm for the detection and compensation of failure of one of the two CSs used in the rotor field-oriented control (DRFOC) structure. This article describes this structure and the method of designing the neural fault classifier (NN-FC). The operation of the NN-FC was verified by simulation tests of the drive system with an integrated FTC strategy. These tests showed the high efficiency of the developed fault classifier operating in the post-fault mode after compensating the previously detected CS fault and ensuring uninterrupted operation of the drive system.