Xiaoxing Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaoxing Fang has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Kejia Ding
Department of Electrical and Computer Engineering, Concordia University, Montreal, QC, Canada
2 shared publications - Aixin Chen
School of Electronic and Information Engineering, Beihang University, Beijing, China
1 shared publication Fei He
School of Electronic and Information Engineering, Beihang University, Beijing 100191, China
1 shared publication- Yazhou Wang
DTU Electro Technical University of Denmark Kgs. Lyngby Denmark
1 shared publication Yu Zhai
School of Electronic and Information Engineering, Beihang University, Beijing 100191, China
1 shared publication
Latest Publications
- 7 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 13 (15361225) , 911-914
Printed Dual-Layer Three-Way Directional Coupler Utilized as 3$\,\times\,$ 3 Beamforming Network for Orthogonal Three-Beam Antenna Array
We present a novel printed dual-layer three-way directional coupler, which can be utilized as 3 × 3 beamforming network (BFN) to provide orthogonal three-beam switching capability. The three-way directional coupler is a passive component with six input/output ports. The signal injected into the input port is equally distributed into the three output ports, with a constant phase difference of -120 ° , 0 ° , or +120 ° . Simulation and measurement results show that within 7% relative bandwidth, good matching, high isolation, equal power division, and constant phase difference have been achieved simultaneously. Utilizing the three-way directional coupler as a 3 × 3 BFN, an orthogonal three-beam antenna array for 5.8-GHz application has been designed, fabricated, and tested to verify its capability experimentally.
- 7 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 13 (15361225) , 911-914
Printed Dual-Layer Three-Way Directional Coupler Utilized as 3$\,\times\,$ 3 Beamforming Network for Orthogonal Three-Beam Antenna Array
We present a novel printed dual-layer three-way directional coupler, which can be utilized as 3 × 3 beamforming network (BFN) to provide orthogonal three-beam switching capability. The three-way directional coupler is a passive component with six input/output ports. The signal injected into the input port is equally distributed into the three output ports, with a constant phase difference of -120 ° , 0 ° , or +120 ° . Simulation and measurement results show that within 7% relative bandwidth, good matching, high isolation, equal power division, and constant phase difference have been achieved simultaneously. Utilizing the three-way directional coupler as a 3 × 3 BFN, an orthogonal three-beam antenna array for 5.8-GHz application has been designed, fabricated, and tested to verify its capability experimentally.
- Open Access
- 1 January 2014
- Published by Wiley in International Journal of Antennas and Propagation
- Vol. 2014, 1-7
Miniaturization Design for 8 × 8 Butler Matrix Based on Back-to-Back Bilayer Microstrip
A low-cost, compact 8 × 8 Butler matrix based on a novel bilayer microstrip configuration is presented and implemented for 4.3 GHz telecommunication application. A back-to-back placed bilayer microstrip structure has been proposed to avoid using crossover. To expand operational bandwidth of the Butler matrix, a three-branch line directional coupler has been employed as 3 dB/90° bridge, and a kind of improved two-order Schiffman phase shifter has been adopted as fixed phase shifter. For application of indoor wireless communication, a compact broadband 8 × 8 Butler matrix has been designed and fabricated. The measured results show that the return loss of the matrix is lower than −10 dB, the isolation is better than 17 dB, the power distribution error is less than ±2.0 dB, the phase error is less than ±15°, and the relative bandwidth is more than 23%.
- 1 January 2014
- Published by Wiley in International Journal of Antennas and Propagation
- Vol. 2014, 1-7
Open AccessMiniaturization Design for 8 × 8 Butler Matrix Based on Back-to-Back Bilayer Microstrip
A low-cost, compact 8 × 8 Butler matrix based on a novel bilayer microstrip configuration is presented and implemented for 4.3 GHz telecommunication application. A back-to-back placed bilayer microstrip structure has been proposed to avoid using crossover. To expand operational bandwidth of the Butler matrix, a three-branch line directional coupler has been employed as 3 dB/90° bridge, and a kind of improved two-order Schiffman phase shifter has been adopted as fixed phase shifter. For application of indoor wireless communication, a compact broadband 8 × 8 Butler matrix has been designed and fabricated. The measured results show that the return loss of the matrix is lower than −10 dB, the isolation is better than 17 dB, the power distribution error is less than ±2.0 dB, the phase error is less than ±15°, and the relative bandwidth is more than 23%.