Zhigang Fan

When a hypersonic seeker flies at high speed within the atmosphere, intense interaction with the incoming flow gradually develops into a complex turbulent flow field. This interaction results in complex thermal responses at the seeker window, causing aerodynamic optical effects such as image shift, jitter, and blur of the target image, thereby restricting the seeker's detection capability and accuracy. This paper uses a numerical simulation model for the guidance performance of a hypersonic seeker under aerodynamic optical transmission effects. The study focuses on an ellipsoidal seeker, with its supersonic flight simulation on the basis of the Reynolds-Averaged Navier-Stokes (RANS) equations to get a non-uniform gradient flow field. The correctness of the flow filed results can be verified by wind tunnel experiments. The transient temperature field of the seeker is solved using an unsteady thermal conduction-radiation coupled fluid-solid heat transfer method. Finally, the guidance performance of the hypersonic seeker under aerodynamic optical effects is predicted using the ray tracing method, which employs wavefront aberration, point spread function, degraded images, and image shift.

The Streak-Tube Imaging Lidar (STIL) has been widely used in high-precision measurement systems due to its ability to capture detailed spatial and temporal information. In this paper, we proposed a ranging measurement method that integrates a Time-to-Digital Converter (TDC) with a streak camera in a remote STIL system. In this method, the TDC accurately measures the trigger pulse time, while the streak camera captures high time-resolution images of the laser echo, thereby enhancing both measurement accuracy and range. A corresponding ranging model is developed for this method. To validate the system’s performance, an outdoor experiment covering a distance of up to 6 km was conducted. The results demonstrate that the system achieved a distance measurement accuracy of 0.1 m, highlighting its effectiveness in long-range applications. The experiment further confirms that the combination of STIL and TDC significantly enhances accuracy and range, making it suitable for various long-range, high-precision measurement tasks.

Owing to the special working systems of streak tube imaging lidar (STIL), the time and space dimensions are coupled together on the streak images. This coupling can cause measurement errors in 3D point clouds and can make measurement results more complicated to calibrate than other kinds of lidars. This paper presents a method to generate a time calibration array and an angle calibration array to separate the offset of the streak into time dimension and space dimension. The time and space information of the signal at any position on the streak image can be indexed through these two arrays. A validation experiment on aircraft was carried out, and the range error of the 3D point cloud was improved from 0.41 m to 0.27 m using the proposed calibration method. Thus, using the proposed calibration method can improve the accuracy of the point cloud produced by STIL.

Grating interferometers that measure in-plane and out-of-plane displacements are not only effective two-degree-of-freedom (DOF) sensors, but are also basic units of six-DOF measurement systems. Besides resolution and accuracy, periodic nonlinear errors, misalignment tolerance, and size of reading heads are more crucial than ever. In this work, a spatially separated heterodyne grating interferometer that measures in- and out-of-plane displacements is proposed. A prototype with 3 mm diameter beams with a size of 69 mm × 51 mm × 41 mm was built and tested. The experiment results show that the 30 s stability is 2.5 nm; the periodic nonlinear errors of the two measuring directions are less than the resolutions (0.25 nm for in-plane motions and 0.15 nm for out-of-plane motions). Double-diffracted configuration ensures that the misalignment tolerances are three axes larger than ±2 mrad.

In this study, the time characteristics of the image quality degradation caused by aero-optical effects in time-varying hypersonic conditions have been investigated to ensure the precision of the guidance capability. The time-accurate imaging scheme based on time discretization has been used to predict the imaging quality of the infrared detection system caused by aero-optical effects. Using wave aberration, point spread function, and peak signal-to-noise ratio as imaging evaluation indicators, the time characteristics of the image quality degradation caused by aero-optical effects under hypersonic conditions have been obtained. During the working process, the image quality degradation caused by the aero-optical transmission effect is not obvious, and limited influence mainly comes from the aero-optical transmission effect of the flow field. With time marching, the aero-thermal radiation effect will rapidly degrade the image quality. The influence of the aero-thermal radiation predominantly determines the image deterioration.

As an important structured beam, vortex beams have a wide range of applications in many fields. However, conventional vortex beam generators require complex optical systems, and this problem is particularly serious with regards to focused vortex beam generators. The emergence of metasurfaces provides a new idea for solving this problem; however, the accompanying chromatic dispersion limits its practical application. In this paper, we show that the dispersion characteristic of focused vortex beam generators based on metasurfaces can be controlled by simultaneously manipulating the geometric and propagative phases. The simulation results show that the transmission-type focused vortex beam generators exhibit positive dispersion, zero dispersion, and negative dispersion, respectively. This work paves the way for the practical application of focused vortex beam generators.

Interaction of Extreme Ultraviolet (EUV) laser with matters is an attractive subject since novel phenomena always occur under the effect of high energy photons. In this paper, the thermal effect involved in the interaction of a capillary discharge 46.9 nm laser with copper was studied theoretically and experimentally. The temperature variation of the laser-irradiated region of copper was calculated. According to the results, the copper surface was ablated obviously and presented the trace of melting, evaporation, and resolidification, which suggested the thermal effect occurred on the surface during the laser irradiation.