Marta Pérez Maroto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marta Pérez Maroto has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Javier Alberto Perez Castan
ETSI Aeronutica y del Espacio, Universidad Politcnica de Madrid (UPM), Madrid, Spain
7 shared publications - Lidia Serrano-Mira
ETSI Aeronutica y del Espacio, Universidad Politcnica de Madrid (UPM), Madrid, Spain
7 shared publications - Luis Pérez Sanz
Universidad Politecnica de Madrid, 28040 Madrid, Spain
7 shared publications - Eduardo Sánchez Ayra
Universidad Politecnica de Madrid, 28040 Madrid, Spain
5 shared publications - César Gómez Arnaldo
Department of Aerospace Systems, Air Transport and Airports, School of Aerospace Engineering, Universidad Politécnica de Madrid (UPM), 28040 Madrid, Spain
2 shared publications - Adrián Casado López
ETSI Aeronáutica y del Espacio. Plaza del Cardenal Cisneros, 3, Universidad Politécnica de Madrid, 28040 Madrid, Spain
1 shared publication
Latest Publications
- Open Access
- 13 November 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (22) , 11263
A Data-Driven Assessment of a Runway Exit Area Concept to Increase Runway Throughput at High-Demand Airports
Runway capacity is a major constraint on overall airport capacity, particularly during landing operations. In this context, Runway Occupancy Time (ROT) directly limits runway throughput. Current runway exit configurations, where the location and geometry of exits are typically defined around a reference aircraft, may prevent a significant portion of the fleet from vacating the runway at the most efficient exit point according to their performance characteristics. As a result, aircraft may be forced to continue rolling towards later exits, leading to increased runway occupancy time. Within this framework, this study introduces and assesses the potential benefits of a new concept based on runway exit areas, enabling an adaptive use of the runway by allowing each aircraft to vacate at the operationally optimal point according to its performance and the prevailing operational boundary conditions. In particular, this study focuses on quantifying, through a representative use case at a high-demand airport operating close to saturation, the potential benefit of this approach compared to the current static layout operation. To this end, surveillance data from the airport are used and compared against simulated data in order to perform a systematic assessment of the impact on ROT and runway throughput. The simulated runway exit area scenario results in consistent reductions in ROT, reaching 5–7 s (9–14%) for the three most common aircraft types and up to 16 s for lighter aircraft. Under the assumptions adopted in the analysis, these improvements correspond to a theoretical upper-bound increase of approximately 23% in runway throughput under ROT-limited conditions, together with potential reductions of around 13% in fuel consumption and CO2 emissions during runway occupancy.
- 13 November 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (22) , 11263
Open AccessA Data-Driven Assessment of a Runway Exit Area Concept to Increase Runway Throughput at High-Demand Airports
Runway capacity is a major constraint on overall airport capacity, particularly during landing operations. In this context, Runway Occupancy Time (ROT) directly limits runway throughput. Current runway exit configurations, where the location and geometry of exits are typically defined around a reference aircraft, may prevent a significant portion of the fleet from vacating the runway at the most efficient exit point according to their performance characteristics. As a result, aircraft may be forced to continue rolling towards later exits, leading to increased runway occupancy time. Within this framework, this study introduces and assesses the potential benefits of a new concept based on runway exit areas, enabling an adaptive use of the runway by allowing each aircraft to vacate at the operationally optimal point according to its performance and the prevailing operational boundary conditions. In particular, this study focuses on quantifying, through a representative use case at a high-demand airport operating close to saturation, the potential benefit of this approach compared to the current static layout operation. To this end, surveillance data from the airport are used and compared against simulated data in order to perform a systematic assessment of the impact on ROT and runway throughput. The simulated runway exit area scenario results in consistent reductions in ROT, reaching 5–7 s (9–14%) for the three most common aircraft types and up to 16 s for lighter aircraft. Under the assumptions adopted in the analysis, these improvements correspond to a theoretical upper-bound increase of approximately 23% in runway throughput under ROT-limited conditions, together with potential reductions of around 13% in fuel consumption and CO2 emissions during runway occupancy.
- Open Access
- 6 May 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 133 (1) , 104
Preliminary Study on the Impact of the Ad Hoc Separation Concept in Free Route Airspace
One of today’s major challenges in air transport is accommodating future growth in traffic demand, which requires addressing capacity limitations. Since separation minima influence airspace capacity, technological progress enables exploring innovative approaches. This paper presents the Ad Hoc Separation concept, which involves applying different separation minima between aircraft pairs based on aircraft type, weight, encounter geometry, flight level, or wind. As a novel approach requiring operational changes to the current ATM system, further research is justified only if tangible benefits are demonstrated. Fast-time simulations in European en-route sectors, both conventional and Free Route Airspace, are performed to assess the benefits. The results show a capacity gain of about one aircraft per hour, along with positive environmental and cost-efficiency benefits.
- 6 May 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 133 (1) , 104
Open AccessPreliminary Study on the Impact of the Ad Hoc Separation Concept in Free Route Airspace
One of today’s major challenges in air transport is accommodating future growth in traffic demand, which requires addressing capacity limitations. Since separation minima influence airspace capacity, technological progress enables exploring innovative approaches. This paper presents the Ad Hoc Separation concept, which involves applying different separation minima between aircraft pairs based on aircraft type, weight, encounter geometry, flight level, or wind. As a novel approach requiring operational changes to the current ATM system, further research is justified only if tangible benefits are demonstrated. Fast-time simulations in European en-route sectors, both conventional and Free Route Airspace, are performed to assess the benefits. The results show a capacity gain of about one aircraft per hour, along with positive environmental and cost-efficiency benefits.
- Open Access
Analysis of the Relationship Between Runway Occupancy Time (ROT) and Aircraft Separation on Final Approach as a Constraint on Runway Capacity Under High-Demand Operations
Runway throughput at high-density European airports is governed not only by the aircraft interarrival separation on final approach but also by runway occupancy time (ROT). As reduction of Separation Minima (SM) becomes operationally and technically feasible and as Air Traffic Control Officers (ATCOs) improve delivery accuracy, ROT is expected to play a progressively larger role as the capacity-limiting mechanism. This study provides the first quantitative evidence of this effect through an analysis of a saturated traffic scenario operating under the RECAT-EU wake turbulence separation scheme and reduced surveillance minima of 2.5 nautical miles, based on ADS-B surveillance data. For each RECAT-EU leader–following sequence, ROT distributions were compared against the actual approach-to-approach times and the applicable SM to derive the probability that ROT becomes the binding constraint. Results show that, when arrival separation is governed by the reduced surveillance-based separation rather than by wake turbulence constraints, ROT is significantly more likely to become the limiting factor for runway capacity. This evidence provides a quantitative basis to guide future research, which should focus on ROT reduction strategies tailored to aircraft performance, including flexible exit taxiway concepts and adaptive exit allocation, prioritising those aircraft sequences identified by this study as most ROT sensitive.
Open AccessAnalysis of the Relationship Between Runway Occupancy Time (ROT) and Aircraft Separation on Final Approach as a Constraint on Runway Capacity Under High-Demand Operations
Runway throughput at high-density European airports is governed not only by the aircraft interarrival separation on final approach but also by runway occupancy time (ROT). As reduction of Separation Minima (SM) becomes operationally and technically feasible and as Air Traffic Control Officers (ATCOs) improve delivery accuracy, ROT is expected to play a progressively larger role as the capacity-limiting mechanism. This study provides the first quantitative evidence of this effect through an analysis of a saturated traffic scenario operating under the RECAT-EU wake turbulence separation scheme and reduced surveillance minima of 2.5 nautical miles, based on ADS-B surveillance data. For each RECAT-EU leader–following sequence, ROT distributions were compared against the actual approach-to-approach times and the applicable SM to derive the probability that ROT becomes the binding constraint. Results show that, when arrival separation is governed by the reduced surveillance-based separation rather than by wake turbulence constraints, ROT is significantly more likely to become the limiting factor for runway capacity. This evidence provides a quantitative basis to guide future research, which should focus on ROT reduction strategies tailored to aircraft performance, including flexible exit taxiway concepts and adaptive exit allocation, prioritising those aircraft sequences identified by this study as most ROT sensitive.
- Open Access
- 30 April 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (9) , 3824
Preliminary Impact Assessment of the Ad Hoc Separation Minima: A New Separation Mode
A major challenge for the Air Traffic Management system is the need to boost airspace capacity, which is near saturation in some situations. Separation minima are one of the factors related to airspace capacity, and the SESAR program promotes research into advanced separation modes. Ad Hoc separation, a novel separation mode, involves applying different pairwise separation minima in the same volume of airspace depending on a set of factors, such as encounter geometry, aircraft models, and flight level, among others. This research examines the impact of implementing this concept in different en-route scenarios. The goal is to determine whether applying this concept proves advantageous or, conversely, results in an increase in the complexity of the system without significant benefits in the key performance areas of capacity, environment, and cost-efficiency. Fast Time Simulations are conducted in RAMS software, with the concept being implemented in the LECMZMU, LECMTLU, and LECMDGU sectors of the Madrid ACC. The results reveal favorable capacity outcomes with increases of around 2% and the LECMZMU sector exhibits the most significant environmental and cost-efficiency benefits. Furthermore, implementing the Ad Hoc concept in a larger scenario could yield even greater environmental and cost-efficiency benefits.
- 30 April 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (9) , 3824
Open AccessPreliminary Impact Assessment of the Ad Hoc Separation Minima: A New Separation Mode
A major challenge for the Air Traffic Management system is the need to boost airspace capacity, which is near saturation in some situations. Separation minima are one of the factors related to airspace capacity, and the SESAR program promotes research into advanced separation modes. Ad Hoc separation, a novel separation mode, involves applying different pairwise separation minima in the same volume of airspace depending on a set of factors, such as encounter geometry, aircraft models, and flight level, among others. This research examines the impact of implementing this concept in different en-route scenarios. The goal is to determine whether applying this concept proves advantageous or, conversely, results in an increase in the complexity of the system without significant benefits in the key performance areas of capacity, environment, and cost-efficiency. Fast Time Simulations are conducted in RAMS software, with the concept being implemented in the LECMZMU, LECMTLU, and LECMDGU sectors of the Madrid ACC. The results reveal favorable capacity outcomes with increases of around 2% and the LECMZMU sector exhibits the most significant environmental and cost-efficiency benefits. Furthermore, implementing the Ad Hoc concept in a larger scenario could yield even greater environmental and cost-efficiency benefits.
- Open Access
Performance-Based Navigation Approach Procedures with Barometric Vertical Guidance: How to Select the Air Temperature for Approach Procedure Design
In performance-based navigation (PBN) procedures with barometric vertical guidance, the effective vertical path angle (VPA) depends on the actual air temperature at the time of approach execution. A very low design temperature could result in an obstacle clearance height (OCH) higher than needed; hence, the airport throughput could be reduced when the cloud ceiling is below the OCH. Conversely, the design of a low temperature higher than is practical could lead to long periods in which the procedure cannot be used. The results of this research show that there is not much difference between the effective VPA for the different low temperatures studied. However, this slight difference, when obstacles penetrating the final approach surface (FAS) exist, usually leads to the approach minima being significantly different from each other. The objective of this study was to analyse the impact of the selected designed low temperatures in PBN procedures with barometric vertical guidance on the OCH/runway throughput and approach periods of use balance. Finally, guidelines on the selection of the minimum designed low temperature are proposed.
Open AccessPerformance-Based Navigation Approach Procedures with Barometric Vertical Guidance: How to Select the Air Temperature for Approach Procedure Design
In performance-based navigation (PBN) procedures with barometric vertical guidance, the effective vertical path angle (VPA) depends on the actual air temperature at the time of approach execution. A very low design temperature could result in an obstacle clearance height (OCH) higher than needed; hence, the airport throughput could be reduced when the cloud ceiling is below the OCH. Conversely, the design of a low temperature higher than is practical could lead to long periods in which the procedure cannot be used. The results of this research show that there is not much difference between the effective VPA for the different low temperatures studied. However, this slight difference, when obstacles penetrating the final approach surface (FAS) exist, usually leads to the approach minima being significantly different from each other. The objective of this study was to analyse the impact of the selected designed low temperatures in PBN procedures with barometric vertical guidance on the OCH/runway throughput and approach periods of use balance. Finally, guidelines on the selection of the minimum designed low temperature are proposed.
- Open Access
Performance Impact Assessment of Reducing Separation Minima for En-Route Operations
The required minimum separation distance between aircraft is believed to be one of the limiting factors on airspace capacity. In recent decades, aircraft separation rules have been modified by progressively shortening the required minimum separation distance. Following this trend in the coming years, a further reduction in the minimum separation distance would be expected. Still, a thorough assessment of the impact of this action on air traffic management performance should be carried out before investing in a reduction of separation minima. A Monte Carlo analysis of the en-route Spanish airspace shows that it is worth reducing the en-route minimum separation distance from 5 NM to 3 NM. This paper shows that a separation minima reduction will bring significant fuel savings, flight delay reduction, air traffic controller workload drop, and overall improvement of safety.
Open AccessPerformance Impact Assessment of Reducing Separation Minima for En-Route Operations
The required minimum separation distance between aircraft is believed to be one of the limiting factors on airspace capacity. In recent decades, aircraft separation rules have been modified by progressively shortening the required minimum separation distance. Following this trend in the coming years, a further reduction in the minimum separation distance would be expected. Still, a thorough assessment of the impact of this action on air traffic management performance should be carried out before investing in a reduction of separation minima. A Monte Carlo analysis of the en-route Spanish airspace shows that it is worth reducing the en-route minimum separation distance from 5 NM to 3 NM. This paper shows that a separation minima reduction will bring significant fuel savings, flight delay reduction, air traffic controller workload drop, and overall improvement of safety.
- Open Access
Identification and Quantification of Contributing Factors to the Criticality of Aircraft Loss of Separation
A Mid-Air Collision (MAC) is a fatal event with tragic consequences. To reduce the risk of a MAC, it is imperative to understand the precursors that trigger it. A primary precursor to a MAC is a loss of separation (LOS) or a separation infringement. This study develops a model to identify the factors contributing to a LOS between aircraft pairs. A Bayesian Network (BN) model is used to estimate the conditional dependencies of the factors affecting criticality, that is, how close the LOS has come to becoming a collision. This probabilistic model is built using GeNIe software from data (based on a database created from incident analysis) and expert judgment. The results of the model allow identification of how factors related to the scenario, the human factor (ATC and flight crew) or the technical systems, affect the criticality of the LOS. Based on this information, it is possible to exclude irrelevant elements that do not contribute or whose influence could be neglected, and to prioritize work on the most important ones, in order to increase ATM safety.
Open AccessIdentification and Quantification of Contributing Factors to the Criticality of Aircraft Loss of Separation
A Mid-Air Collision (MAC) is a fatal event with tragic consequences. To reduce the risk of a MAC, it is imperative to understand the precursors that trigger it. A primary precursor to a MAC is a loss of separation (LOS) or a separation infringement. This study develops a model to identify the factors contributing to a LOS between aircraft pairs. A Bayesian Network (BN) model is used to estimate the conditional dependencies of the factors affecting criticality, that is, how close the LOS has come to becoming a collision. This probabilistic model is built using GeNIe software from data (based on a database created from incident analysis) and expert judgment. The results of the model allow identification of how factors related to the scenario, the human factor (ATC and flight crew) or the technical systems, affect the criticality of the LOS. Based on this information, it is possible to exclude irrelevant elements that do not contribute or whose influence could be neglected, and to prioritize work on the most important ones, in order to increase ATM safety.