Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuan Yang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Measurement and Probability of Detection of Longitudinal Stress in Rails Based on Electromagnetic Ultrasonic Birefringence

    by Yibo Li, Ping Wang, Guiyun Tian, Xin Li, Yuan Yang

    Existing techniques for measuring longitudinal stress in rails are primarily limited to the shallow surface area of the rail head, hindering accurate assessment of the overall stress state across the rail’s cross-section. To overcome this limitation, this study presents a novel methodology for rail stress measurement based on electromagnetic ultrasonic birefringence. This method utilizes an electromagnetic acoustic transducer (EMAT) to generate two types of shear waves with polarization directions parallel and perpendicular to the stress direction, which propagate through the entire rail cross-section. By calibrating the acoustoelastic birefringence of these shear waves, a model for longitudinal stress measurement was established, and its performance was quantitatively analyzed using the probability of detection (POD). Test results indicate a strong linear relationship between acoustoelastic birefringence and longitudinal compressive stress in the rail. The absolute errors of stress measurements for all rails are within 3.60 MPa. The key POD parameters (a50 and a90/95) for CHN60, CHN50, and CHN43 rails are -3.11/-7.46 MPa, -3.56/-9.79 MPa, and -5.31/-10.93 MPa, respectively. These data demonstrate that the electromagnetic ultrasonic birefringence stress measurement method provides high measurement accuracy for rail longitudinal stress, offering valuable insights for developing rail stress measurement equipment.


  • Open Access

    Stress and Microstructures Characterization Based on Magnetic Incremental Permeability and Magnetic Barkhausen Noise Techniques

    by Hongwei Sheng, Ping Wang, Yuan Yang, Chenglong Tang

    Both microstructure and stress affect the structure and kinematic properties of magnetic domains. In fact, microstructural and stress variations often coexist. However, the coupling of microstructure and stress on magnetic domains is seldom considered in the evaluation of microstructural characteristics. In this investigation, Magnetic incremental permeability (MIP) and magnetic Barkhausen noise (MBN) techniques are used to study the coupling effect of characteristic microstructure and stress on the reversible and irreversible motions of magnetic domains, and the quantitative relationship between microstructure and magnetic domain characteristics is established. Considering the coupling effect of microstructure and stress on magnetic domains, a patterned characterization method of microstructure and stress is innovatively proposed. Pattern recognition based on the Multi-layer Perceptron (MLP) model is realized for microstructure and stress with an accuracy rate higher than 97%. The results show that the pattern recognition accuracy of magnetic domain features and micro-magnetic features simultaneously as input parameters is higher than that of micro-magnetic features alone as input parameters.


  • Rail fracture monitoring based on ultrasonic-guided wave technology with multivariate coded excitation

    by Yuan Yang, Ping Wang, Yinliang Jia, Lixuan Jing, Yu Shi, Hongwei Sheng, Yi Jiang, Renbao Liu, Yihang Xu, Xin Li


  • Open Access

    Evaluation of the Transverse Crack Depth of Rail Bottoms Based on the Ultrasonic Guided Waves of Piezoelectric Sensor Arrays

    by Yuan Yang, Ping Wang, Tian-Lang Song, Yi Jiang, Wen-Tao Zhou, Wei-Lei Xu

    A method based on the high-frequency ultrasonic guided waves (UGWs) of a piezoelectric sensor array is proposed to monitor the depth of transverse cracks in rail bottoms. Selecting high-frequency UGWs with a center frequency of 350 kHz can enable the monitoring of cracks with a depth of 3.3 mm. The method of arranging piezoelectric sensor arrays on the upper surface and side of the rail bottom is simulated and analyzed, which allows the comprehensive monitoring of transverse cracks at different depths in the rail bottom. The multi-value domain features of the UGW signals are further extracted, and a back propagation neural network (BPNN) is used to establish the evaluation model of the transverse crack depth for the rail bottom. The optimal evaluation model of multi-path combination is reconstructed with the minimum value of the root mean square error (RMSE) as the evaluation standard. After testing and comparison, it was found that each metric of the reconstructed model is significantly better than each individual path; the RMSE is reduced to 0.3762; the coefficient of determination R2 reached 0.9932; the number of individual evaluation values with a relative error of less than 10% and 5% accounted for 100% and 87.50% of the total number of evaluations, respectively.