Yongqiang Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yongqiang Wang has a total of 97 co-authors. Here are the top co-authors by number of shared publications:
- Hui Ding
School of Environmental Science and Engineering, Tianjin University, Tianjin 300350, China
10 shared publications Dan Zhao
School of Environmental Science and Engineering, Tianjin University, Tianjin, China
7 shared publications- Gang Kevin Li
Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria 3010, Australia
7 shared publications Gang Kevin Li
4 shared publicationsHui Ding
4 shared publicationsShejiang Liu
Tianjin Univ, Sch Environm Sci & Engn, Tianjin, Peoples R China
4 shared publications
Latest Publications
- Open Access
Room-Temperature Air-Only Catalytic Oxidation of Indoor Volatile Organic Compounds: Mechanistic Insights and Emerging Catalysts
Driven by global urbanization and increasing emphasis on sustainable building practices, indoor volatile organic compounds (VOCs) have emerged as a major environmental and health challenge. This review specifically focuses on room-temperature air-only catalytic oxidation of representative indoor VOCs under a recently matured and highly application-relevant research direction. Recent advances are systematically summarized, highlighting catalyst design strategies, air-phase reaction mechanisms, and performance of noble metal catalysts (NMCs), transition metal oxides (TMOs), bimetallic synergistic catalysts (BSCs), and single-atom catalysts (SACs). Emphasis is placed on thermodynamic feasibility, reaction kinetics, oxidation behavior of non-formaldehyde VOCs, and mechanistic insights associated with SACs interfacial synergy, which enable efficient O2 activation, high selectivity, and operational stability without external oxidants even under high VOC concentrations. This review provides theoretical foundations and technical guidance for VOCs mitigation and supports the advancement of green, low-carbon, and safe indoor air purification strategies worldwide.
Open AccessRoom-Temperature Air-Only Catalytic Oxidation of Indoor Volatile Organic Compounds: Mechanistic Insights and Emerging Catalysts
Driven by global urbanization and increasing emphasis on sustainable building practices, indoor volatile organic compounds (VOCs) have emerged as a major environmental and health challenge. This review specifically focuses on room-temperature air-only catalytic oxidation of representative indoor VOCs under a recently matured and highly application-relevant research direction. Recent advances are systematically summarized, highlighting catalyst design strategies, air-phase reaction mechanisms, and performance of noble metal catalysts (NMCs), transition metal oxides (TMOs), bimetallic synergistic catalysts (BSCs), and single-atom catalysts (SACs). Emphasis is placed on thermodynamic feasibility, reaction kinetics, oxidation behavior of non-formaldehyde VOCs, and mechanistic insights associated with SACs interfacial synergy, which enable efficient O2 activation, high selectivity, and operational stability without external oxidants even under high VOC concentrations. This review provides theoretical foundations and technical guidance for VOCs mitigation and supports the advancement of green, low-carbon, and safe indoor air purification strategies worldwide.
- Open Access
- 27 February 2026
- Published by MDPI AG in Preprints.org
Room-Temperature Air-Only Catalytic Oxidation of Indoor Volatile Organic Compounds: Mechanistic Insights and Emerging Catalysts
Driven by global urbanization and increasing emphasis on sustainable building practices, indoor volatile organic compounds (VOCs) have emerged as a major environmental and health challenge. This review specifically focuses on room-temperature air-only catalytic oxidation of representative indoor VOCs under, a recently matured and highly application-relevant research direction. Recent advances are systematically summarized, highlighting catalyst design strategies, air-phase reaction mechanisms, and performance of noble metal catalysts (NMCs), transition metal oxides (TMOs), bimetallic synergistic catalysts (BSCs), and single-atom catalysts (SACs). Emphasis is placed on thermodynamic feasibility, reaction kinetics, oxidation behavior of non-formaldehyde VOCs, and mechanistic insights associated with SACs interfacial synergy, which enable efficient O₂ activation, high selectivity, and operational stability without external oxidants even under high VOC concentrations. This review provides theoretical foundations and technical guidance for VOCs mitigation and supports the advancement of green, low-carbon, and safe indoor air purification strategies worldwide.
- 27 February 2026
- Published by MDPI AG in Preprints.org
Open AccessRoom-Temperature Air-Only Catalytic Oxidation of Indoor Volatile Organic Compounds: Mechanistic Insights and Emerging Catalysts
Driven by global urbanization and increasing emphasis on sustainable building practices, indoor volatile organic compounds (VOCs) have emerged as a major environmental and health challenge. This review specifically focuses on room-temperature air-only catalytic oxidation of representative indoor VOCs under, a recently matured and highly application-relevant research direction. Recent advances are systematically summarized, highlighting catalyst design strategies, air-phase reaction mechanisms, and performance of noble metal catalysts (NMCs), transition metal oxides (TMOs), bimetallic synergistic catalysts (BSCs), and single-atom catalysts (SACs). Emphasis is placed on thermodynamic feasibility, reaction kinetics, oxidation behavior of non-formaldehyde VOCs, and mechanistic insights associated with SACs interfacial synergy, which enable efficient O₂ activation, high selectivity, and operational stability without external oxidants even under high VOC concentrations. This review provides theoretical foundations and technical guidance for VOCs mitigation and supports the advancement of green, low-carbon, and safe indoor air purification strategies worldwide.
- Open Access
- 4 October 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 524
Developing Joule-heating regeneration of carbon-based adsorbents for Direct Air Capture
- 4 October 2025
- Published by Elsevier in Chemical Engineering Journal
- Vol. 524
Open AccessDeveloping Joule-heating regeneration of carbon-based adsorbents for Direct Air Capture
- Open Access
- 14 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Developing Joule-heating regeneration of carbon-based adsorbents for Direct Air Capture
As anthropogenic CO2 emissions responsible for our changing climate continue to rise, new technologies are needed to reduce their impact. Direct Air Capture (DAC) is a developing technological solution whereby CO2 is captured directly from ambient air and later released in a controlled manner for further use or storage. This work details the development of a new methodology that allows DAC candidate materials to be tested quickly and reliably in real atmospheric conditions. The methodology presented uses Joule heating for material regeneration, a rapid heating technique we find can raise the temperature of activated carbon-based sorbents to over 100 °C in 10 seconds. Focussing on a KOH-impregnated activated-carbon cloth (i-ACC-KOH) sorbent, we find a linear relationship between regeneration temperature and reversible CO2 capacity, with a peak capacity of 100 ± 20 mmol kg-1 in low-humidity atmospheric conditions. Performance under high-humidity and long cycling experiments were also assessed, highlighting key inputs in providing a well-rounded picture of material capability. We employ our methodology to demonstrate: (i), the rapid kinetics of our Joule heating methodology with only 20-25 minutes per cycle (5-10 mins desorption, 15 min adsorption); (ii), the impact of ambient humidity on the performance of i-ACC-KOH, identifying only a limited reduction in capacity (≈ 8%) with relative humidity up to 60%; and (iii), high material stability with respect to cycling, retaining 80% of capacity across 847 capture/release cycles. Overall, our work establishes a facile methodology for testing DAC sorbents in a Joule heating regeneration cycle, probing basic kinetics, competitive adsorption and cycling stability, and can facilitate the development of improved sorbents for DAC.
- 14 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDeveloping Joule-heating regeneration of carbon-based adsorbents for Direct Air Capture
As anthropogenic CO2 emissions responsible for our changing climate continue to rise, new technologies are needed to reduce their impact. Direct Air Capture (DAC) is a developing technological solution whereby CO2 is captured directly from ambient air and later released in a controlled manner for further use or storage. This work details the development of a new methodology that allows DAC candidate materials to be tested quickly and reliably in real atmospheric conditions. The methodology presented uses Joule heating for material regeneration, a rapid heating technique we find can raise the temperature of activated carbon-based sorbents to over 100 °C in 10 seconds. Focussing on a KOH-impregnated activated-carbon cloth (i-ACC-KOH) sorbent, we find a linear relationship between regeneration temperature and reversible CO2 capacity, with a peak capacity of 100 ± 20 mmol kg-1 in low-humidity atmospheric conditions. Performance under high-humidity and long cycling experiments were also assessed, highlighting key inputs in providing a well-rounded picture of material capability. We employ our methodology to demonstrate: (i), the rapid kinetics of our Joule heating methodology with only 20-25 minutes per cycle (5-10 mins desorption, 15 min adsorption); (ii), the impact of ambient humidity on the performance of i-ACC-KOH, identifying only a limited reduction in capacity (≈ 8%) with relative humidity up to 60%; and (iii), high material stability with respect to cycling, retaining 80% of capacity across 847 capture/release cycles. Overall, our work establishes a facile methodology for testing DAC sorbents in a Joule heating regeneration cycle, probing basic kinetics, competitive adsorption and cycling stability, and can facilitate the development of improved sorbents for DAC.
- Open Access
- 1 April 2025
- Published by Springer Nature in Adsorption
- Vol. 31 (4) , 1-13
Temperature-dependent kinetic analysis of direct air capture using a gravimetric approach in porous environments
Adsorption kinetics has been regarded as one of the most critical factors determining the productivity and economic feasibility of direct air capture (DAC) of CO2, but has received relatively little attention compared with adsorption thermodynamics. One commonly used method for kinetics investigation is thermogravimetric analysis (TGA) which suffers from gas diffusion limitations and often underestimates adsorption rates. Here, a modified TGA system equipped with a porous self-made crucible was employed to address the gas diffusion challenges and analyze the kinetic behaviors of three polymeric chemisorbents, including Lewatit VP OC 1065, for DAC. The obtained adsorption kinetics were successfully applied to simulate and describe the breakthrough behaviors in a fixed-bed column. The CO2 adsorption/desorption kinetics of chemisorbents with different amine structures or loadings were measured at various temperatures and described through the linear driving force model. The present work offers a reliable and fast kinetics analysis approach for DAC, paving the way for accurately collecting the kinetics parameters used for guiding further adsorbent and process design. Graphic abstract
- 1 April 2025
- Published by Springer Nature in Adsorption
- Vol. 31 (4) , 1-13
Open AccessTemperature-dependent kinetic analysis of direct air capture using a gravimetric approach in porous environments
Adsorption kinetics has been regarded as one of the most critical factors determining the productivity and economic feasibility of direct air capture (DAC) of CO2, but has received relatively little attention compared with adsorption thermodynamics. One commonly used method for kinetics investigation is thermogravimetric analysis (TGA) which suffers from gas diffusion limitations and often underestimates adsorption rates. Here, a modified TGA system equipped with a porous self-made crucible was employed to address the gas diffusion challenges and analyze the kinetic behaviors of three polymeric chemisorbents, including Lewatit VP OC 1065, for DAC. The obtained adsorption kinetics were successfully applied to simulate and describe the breakthrough behaviors in a fixed-bed column. The CO2 adsorption/desorption kinetics of chemisorbents with different amine structures or loadings were measured at various temperatures and described through the linear driving force model. The present work offers a reliable and fast kinetics analysis approach for DAC, paving the way for accurately collecting the kinetics parameters used for guiding further adsorbent and process design. Graphic abstract
- 20 February 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (12) , 8368-8374
Structural engineering through modulator incorporation in UiO-66-NH2 metal–organic frameworks for piezoresponse regulation
UiO-66-NH2 (Hf/Zr) MOFs were structurally tuned with acetic acid (AA). Increasing AA creates missing-linker defects and incorporates more modulators, breaking symmetry and boosting the piezoresponse-a simple route to engineering piezoelectric MOFs.
- 20 February 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (12) , 8368-8374
Structural engineering through modulator incorporation in UiO-66-NH2 metal–organic frameworks for piezoresponse regulation
UiO-66-NH2 (Hf/Zr) MOFs were structurally tuned with acetic acid (AA). Increasing AA creates missing-linker defects and incorporates more modulators, breaking symmetry and boosting the piezoresponse-a simple route to engineering piezoelectric MOFs.
- Open Access
- 11 November 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
Distributed direct air capture of carbon dioxide by synergistic water harvesting
Adsorption-based direct air capture (DAC) of carbon dioxide, using chemisorbents like solid amines, has been widely recognized as a sustainable measure to contain atmospheric CO2 concentrations. However, the productivity and economic viability of DAC have been compromised by the high energy consumption for regenerating the adsorbents. Here, we show that by synergistically harvesting water and carbon dioxide from the atmosphere, we can regenerate the unit using in situ vapor purge at low energy and capital cost. The desorption of CO2 is substantially enhanced in the presence of concentrated water vapors at around 100 °C, concurrently producing 97.7% purity CO2 and fresh water without the use of vacuum pumps and steam boilers. Moreover, we demonstrate that the DAC prototype can also be powered by sunlight, which recovers 98% of the adsorbed CO2, with 20% less energy demand, enabling sustainable carbon capture from air in a real distributed manner.
- 11 November 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-11
Open AccessDistributed direct air capture of carbon dioxide by synergistic water harvesting
Adsorption-based direct air capture (DAC) of carbon dioxide, using chemisorbents like solid amines, has been widely recognized as a sustainable measure to contain atmospheric CO2 concentrations. However, the productivity and economic viability of DAC have been compromised by the high energy consumption for regenerating the adsorbents. Here, we show that by synergistically harvesting water and carbon dioxide from the atmosphere, we can regenerate the unit using in situ vapor purge at low energy and capital cost. The desorption of CO2 is substantially enhanced in the presence of concentrated water vapors at around 100 °C, concurrently producing 97.7% purity CO2 and fresh water without the use of vacuum pumps and steam boilers. Moreover, we demonstrate that the DAC prototype can also be powered by sunlight, which recovers 98% of the adsorbed CO2, with 20% less energy demand, enabling sustainable carbon capture from air in a real distributed manner.
- 30 October 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 500
Fe-mordenite for high-performance N2 rejection
- 30 October 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 500
Fe-mordenite for high-performance N2 rejection