Bojana Boskovic
Research Subjects
Research Interests
Bojana Boskovic has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ivan Grujic
University of Kragujevac
7 shared publications - Nadica Stojanovic
University of Kragujevac
7 shared publications Ali Belhocine
Department of Mechanical Engineering, University Mustapha Stambouli of Mascara, Algeria
2 shared publications- Danijela Miloradović
Faculty of Engineering, University of Kragujevac, Sestre Janjić 6, 34000 Kragujevac, Serbia
1 shared publication - Jasna Glišović
Faculty of Engineering, University of Kragujevac, 34000 Kragujevac, Serbia
1 shared publication - Jovanka Lukić
University of Kragujevac, Faculty of Engineering, Sestre Janjic 6, 34000 Kragujevac, Serbia
1 shared publication
Latest Publications
- 16 February 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Optimization of braking parameters using Taguchi method and experimental validation
The optimization of braking working parameters was conducted by analyzing the influential factors: vehicle speed (80, 100, and 120 km/h), a quarter of the vehicle mass (200, 250, and 300 kg), and brake pressure (3, 4, and 5 MPa). The goal was to achieve the lowest temperature on the braking pad contact surface and reduce braking time. Experimental work was conducted on the test rig BRAKE DYNO 2020. By applying ANOVA analysis, it was found that vehicle speed accounts for 72% of the influence on brake pad temperature, followed by vehicle mass and braking pressure accounting for 20% and 8%, respectively. On the other hand, for the mean value of simulated vehicle braking time, the brake pressure had the biggest influence (66.78%), followed by vehicle speed (21.75%), and a quarter of the vehicle mass (10.90%). Both the Taguchi method and the regression model showed a good correlation with the experimental results.
- 16 February 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Optimization of braking parameters using Taguchi method and experimental validation
The optimization of braking working parameters was conducted by analyzing the influential factors: vehicle speed (80, 100, and 120 km/h), a quarter of the vehicle mass (200, 250, and 300 kg), and brake pressure (3, 4, and 5 MPa). The goal was to achieve the lowest temperature on the braking pad contact surface and reduce braking time. Experimental work was conducted on the test rig BRAKE DYNO 2020. By applying ANOVA analysis, it was found that vehicle speed accounts for 72% of the influence on brake pad temperature, followed by vehicle mass and braking pressure accounting for 20% and 8%, respectively. On the other hand, for the mean value of simulated vehicle braking time, the brake pressure had the biggest influence (66.78%), followed by vehicle speed (21.75%), and a quarter of the vehicle mass (10.90%). Both the Taguchi method and the regression model showed a good correlation with the experimental results.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 145-148
COMPUTATIONAL ANALYSIS OF THE VEHICLES COLLISION
During the transport, many factors can lead to the traffic accident. The highest number of accidents on the Republic of Serbia, where two vehicles participated are frontal collisions. In the paper are conducted two computational simulations of vehicles frontal collision, where in the first case, the vehicle one had speed of 90 km/h, and the second vehicle had the speed of 60 km/h, while in the second case, the speed of the vehicle 1 was 60 km/h, while the speed of the vehicle 2 was 90 km/h. both simulations were conducted in PC-Crash software package, which represent the special software for traffic accidents simulation. After the simulations, in the paper are presented the propositions and measurements for the reduction of the number of traffic accidents. On the basis of the conducted research, were drawn conclusions what should take into the consideration during the production of new vehicles.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 145-148
COMPUTATIONAL ANALYSIS OF THE VEHICLES COLLISION
During the transport, many factors can lead to the traffic accident. The highest number of accidents on the Republic of Serbia, where two vehicles participated are frontal collisions. In the paper are conducted two computational simulations of vehicles frontal collision, where in the first case, the vehicle one had speed of 90 km/h, and the second vehicle had the speed of 60 km/h, while in the second case, the speed of the vehicle 1 was 60 km/h, while the speed of the vehicle 2 was 90 km/h. both simulations were conducted in PC-Crash software package, which represent the special software for traffic accidents simulation. After the simulations, in the paper are presented the propositions and measurements for the reduction of the number of traffic accidents. On the basis of the conducted research, were drawn conclusions what should take into the consideration during the production of new vehicles.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 127-131
EXPERIMENTAL INVESTIGATION OF VEHICLE DECELERATION USING THE TAGUCHI METHOD TO IMPROVE TRAFFIC SAFETY
This paper presents a study on the influence of braking operating parameters on vehicle deceleration using the Taguchi method of experimental design. The experiment was conducted with 16 measurements, where the input parameters were the initial speed, the quartervehicle mass, and the brake system pressure. The output variables observed were the brake disc temperature, braking distance, and vehicle deceleration. The results show that the initial speed has the greatest influence on the braking distance, while the brake system pressure significantly affects the stability of deceleration and the increase in brake disc temperature. This approach enables efficient optimization of the braking process with a minimal number of experiments.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 127-131
EXPERIMENTAL INVESTIGATION OF VEHICLE DECELERATION USING THE TAGUCHI METHOD TO IMPROVE TRAFFIC SAFETY
This paper presents a study on the influence of braking operating parameters on vehicle deceleration using the Taguchi method of experimental design. The experiment was conducted with 16 measurements, where the input parameters were the initial speed, the quartervehicle mass, and the brake system pressure. The output variables observed were the brake disc temperature, braking distance, and vehicle deceleration. The results show that the initial speed has the greatest influence on the braking distance, while the brake system pressure significantly affects the stability of deceleration and the increase in brake disc temperature. This approach enables efficient optimization of the braking process with a minimal number of experiments.
- 17 October 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 239 (4) , 393-409
The composition, working parameters and measures for the brake wear reduction: A review
Brakes are one of the basic safety systems on a vehicle. During the operation of the vehicle, the brakes allow the vehicle to slow down, i.e., to adapt to traffic conditions or to stop, if necessary. However, in all conditions mentioned, emissions of brake wear products occur, which are very harmful to the environment because they can contain heavy metals. Working parameters of braking process are responsible for the intensity of brake wear, which can be tested in laboratory or road conditions, as well as by using modern software packages. This paper covers the basic theoretical assumptions about brake wear, as well as the materials applied in their production. The methodologies that other authors have come up with in their research are shown in this paper. Those methodologies are related to testing the brake wear, the parameters which are the most influential on wear, as well as the measures for the reduction of brake wear. The available scientific literature in the subject area lead us to the conclusion what should be taken into the consideration in future research and what factors are not thoroughly investigated, all with the aim of reducing the emission of brake wear.
- 17 October 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 239 (4) , 393-409
The composition, working parameters and measures for the brake wear reduction: A review
Brakes are one of the basic safety systems on a vehicle. During the operation of the vehicle, the brakes allow the vehicle to slow down, i.e., to adapt to traffic conditions or to stop, if necessary. However, in all conditions mentioned, emissions of brake wear products occur, which are very harmful to the environment because they can contain heavy metals. Working parameters of braking process are responsible for the intensity of brake wear, which can be tested in laboratory or road conditions, as well as by using modern software packages. This paper covers the basic theoretical assumptions about brake wear, as well as the materials applied in their production. The methodologies that other authors have come up with in their research are shown in this paper. Those methodologies are related to testing the brake wear, the parameters which are the most influential on wear, as well as the measures for the reduction of brake wear. The available scientific literature in the subject area lead us to the conclusion what should be taken into the consideration in future research and what factors are not thoroughly investigated, all with the aim of reducing the emission of brake wear.
- 4 February 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (12) , 32288-32300
The impact of accidents during the transport of dangerous good, on people, the environment, and infrastructure and measures for their reduction: a review
Road transport is one of the most dangerous methods of goods transport. Driver errors and poor traffic conditions can cause traffic accidents, which can have a negative impact on people’s health, the environment, and infrastructure. The main influence on the level of the consequences is the chemical composition and amount of the transported substance. This paper presents the causes of traffic accidents during the transport of dangerous goods. In addition, how traffic accidents during the transport of dangerous goods affect people’s health, the environment, and infrastructure was shown. After that, measures for accidents avoidance and the alleviation and reduction of dangerous goods were given. From the review of studies from the subject field, it can be concluded that the dangerous goods are very harmful to people, the environment, and infrastructure when transport accidents occur. Lessons should be learned from the history of accidents involving the transport of dangerous goods to avoid repeating the same mistakes. The review conclusions indicate that a routes optimization and investment in road infrastructure are needed to reduce risk during the transport of dangerous goods.
- 4 February 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (12) , 32288-32300
The impact of accidents during the transport of dangerous good, on people, the environment, and infrastructure and measures for their reduction: a review
Road transport is one of the most dangerous methods of goods transport. Driver errors and poor traffic conditions can cause traffic accidents, which can have a negative impact on people’s health, the environment, and infrastructure. The main influence on the level of the consequences is the chemical composition and amount of the transported substance. This paper presents the causes of traffic accidents during the transport of dangerous goods. In addition, how traffic accidents during the transport of dangerous goods affect people’s health, the environment, and infrastructure was shown. After that, measures for accidents avoidance and the alleviation and reduction of dangerous goods were given. From the review of studies from the subject field, it can be concluded that the dangerous goods are very harmful to people, the environment, and infrastructure when transport accidents occur. Lessons should be learned from the history of accidents involving the transport of dangerous goods to avoid repeating the same mistakes. The review conclusions indicate that a routes optimization and investment in road infrastructure are needed to reduce risk during the transport of dangerous goods.
- Open Access
- 1 January 2023
- Published by National Library of Serbia in Thermal Science
- Vol. 28 (00) , 286
Experimental investigation of the influence of deceleration on brake elements temperature in order to improve traffic safety
Correct determination of deceleration is very important from the aspect of the investigation of traffic accidents, because deceleration of the vehicle involved in the traffic accident is of key importance for the preparation of a quality finding and opinion of traffic expert. In this paper it was conducted the investigation how the change of the pressure affects the change ofthe temperature of the brake couple and how this change is later reflected in the deceleration of the vehicle and the braking distance. In order to find how the temperature influences the deceleration, it was conducted experimental investigation. The experimental investigation was conducted on the experimental test rig, which simulates the braking process for the quarter of the vehicle mass, and the experimental investigation was conducted for four different braking pressures: 2 MPa, 3 MPa, 4 MPa and 5 MPa. The temperature of the brake couple was measured during the entire braking process. Also the difference between Mean Fully Developed Deceleration and average vehicle deceleration is shown. It was found that for the case when the braking pressure was 5 MPa, the maximum deceleration value was greater than the value of gravity of Earth which may impair the stability of the vehicle. When the braking pressure was 2 MPa, 3 MPa and 4 MPa, the temperature increased respectively, but in the last measurement, when the braking pressure was 5 MPa, it began to decrease. Braking distance decreased with the increment of the braking pressure. Also, with the braking pressure increment, the deceleration increased in all cases.
- 1 January 2023
- Published by National Library of Serbia in Thermal Science
- Vol. 28 (00) , 286
Open AccessExperimental investigation of the influence of deceleration on brake elements temperature in order to improve traffic safety
Correct determination of deceleration is very important from the aspect of the investigation of traffic accidents, because deceleration of the vehicle involved in the traffic accident is of key importance for the preparation of a quality finding and opinion of traffic expert. In this paper it was conducted the investigation how the change of the pressure affects the change ofthe temperature of the brake couple and how this change is later reflected in the deceleration of the vehicle and the braking distance. In order to find how the temperature influences the deceleration, it was conducted experimental investigation. The experimental investigation was conducted on the experimental test rig, which simulates the braking process for the quarter of the vehicle mass, and the experimental investigation was conducted for four different braking pressures: 2 MPa, 3 MPa, 4 MPa and 5 MPa. The temperature of the brake couple was measured during the entire braking process. Also the difference between Mean Fully Developed Deceleration and average vehicle deceleration is shown. It was found that for the case when the braking pressure was 5 MPa, the maximum deceleration value was greater than the value of gravity of Earth which may impair the stability of the vehicle. When the braking pressure was 2 MPa, 3 MPa and 4 MPa, the temperature increased respectively, but in the last measurement, when the braking pressure was 5 MPa, it began to decrease. Braking distance decreased with the increment of the braking pressure. Also, with the braking pressure increment, the deceleration increased in all cases.
- 14 September 2022
- Published by Springer Nature in Journal of Ambient Intelligence and Humanized Computing
- Vol. 14 (8) , 11173-11183
Modelling and determination of heavy-duty vehicle driver visual field in the virtual environment
- 14 September 2022
- Published by Springer Nature in Journal of Ambient Intelligence and Humanized Computing
- Vol. 14 (8) , 11173-11183
Modelling and determination of heavy-duty vehicle driver visual field in the virtual environment