Na Meng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Na Meng has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Han Liang
4 shared publicationsHuiyan Wang
4 shared publications- Ninglin Zhou
National and Local Joint Engineering Research Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
4 shared publications Xinrong Huang
School of Food Science and Pharmaceutical Engineering Nanjing Normal University Nanjing 210046 China
3 shared publicationsXuemei Sun
3 shared publicationsNinglin Zhou
2 shared publications
Latest Publications
- 11 November 2026
- Published by Wiley in Packaging Technology and Science
A Facile Dual‐Functional Biodegradable Silk Fibroin/Sodium Alginate Composite Film With Antibacterial Activity and pH‐Responsive Freshness Indication for Shrimp Preservation
Traditional food packaging films suffer from single function, poor fresh‐keeping performance, inability to monitor food freshness in real time and inferior biodegradability. To address these industrial bottlenecks, a multifunctional intelligent food packaging composite film was successfully fabricated based on silk fibroin‐sodium alginate (SF‐SA) matrix via the synergistic modification of zinc oxide nanoparticles/polydopamine‐modified montmorillonite (ZnO/PDA‐MMT) functional fillers and red cabbage anthocyanin (RCA). The prepared composite film possesses the advantages of pH visual responsiveness, high‐efficiency antibacterial activity and excellent biodegradability. The structural, physical, and functional performances of resultant composite films were systematically characterized. Compared with pure SF‐SA film, the introduction of ZnO/PDA‐MMT improved mechanical properties and thermal stability and reduced moisture content (MC, from 13.82 ± 1.05 to 7.31% ± 0.35%) and water vapour transmission rate (WVTR, from 964.00 ± 17.33 to 871.15 ± 35.70 g m −2 d −1 ). The composite film exhibited enhanced antioxidant capacity and favourable antibacterial activity against Escherichia coli and Staphylococcus aureus . Soil burial tests verified its desirable biodegradability with obvious structural degradation within 28 days. It displayed distinct colour transition from red to dark brown over pH 2–12, with good colour stability and ammonia‐sensing performance. Obvious colour variation occurred during shrimp spoilage, enabling real‐time visual freshness monitoring. In summary, the as‐prepared SF‐SA‐based composite film integrates superior mechanical, antibacterial, and visual indication properties, holding great application potential for aquatic product preservation and smart food packaging.
- 11 November 2026
- Published by Wiley in Packaging Technology and Science
A Facile Dual‐Functional Biodegradable Silk Fibroin/Sodium Alginate Composite Film With Antibacterial Activity and pH‐Responsive Freshness Indication for Shrimp Preservation
Traditional food packaging films suffer from single function, poor fresh‐keeping performance, inability to monitor food freshness in real time and inferior biodegradability. To address these industrial bottlenecks, a multifunctional intelligent food packaging composite film was successfully fabricated based on silk fibroin‐sodium alginate (SF‐SA) matrix via the synergistic modification of zinc oxide nanoparticles/polydopamine‐modified montmorillonite (ZnO/PDA‐MMT) functional fillers and red cabbage anthocyanin (RCA). The prepared composite film possesses the advantages of pH visual responsiveness, high‐efficiency antibacterial activity and excellent biodegradability. The structural, physical, and functional performances of resultant composite films were systematically characterized. Compared with pure SF‐SA film, the introduction of ZnO/PDA‐MMT improved mechanical properties and thermal stability and reduced moisture content (MC, from 13.82 ± 1.05 to 7.31% ± 0.35%) and water vapour transmission rate (WVTR, from 964.00 ± 17.33 to 871.15 ± 35.70 g m −2 d −1 ). The composite film exhibited enhanced antioxidant capacity and favourable antibacterial activity against Escherichia coli and Staphylococcus aureus . Soil burial tests verified its desirable biodegradability with obvious structural degradation within 28 days. It displayed distinct colour transition from red to dark brown over pH 2–12, with good colour stability and ammonia‐sensing performance. Obvious colour variation occurred during shrimp spoilage, enabling real‐time visual freshness monitoring. In summary, the as‐prepared SF‐SA‐based composite film integrates superior mechanical, antibacterial, and visual indication properties, holding great application potential for aquatic product preservation and smart food packaging.
- Top Cited Papers
- 26 September 2024
- Published by Elsevier in Food Hydrocolloids
- Vol. 159
Fabrication of antimicrobial chitosan/ZnO nanoparticles/lecithin-montmorillonite films for food packaging application
- 26 September 2024
- Published by Elsevier in Food Hydrocolloids
- Vol. 159
Top Cited PapersFabrication of antimicrobial chitosan/ZnO nanoparticles/lecithin-montmorillonite films for food packaging application
- 22 February 2023
- Published by Wiley in ChemistrySelect
- Vol. 8 (8)
Synthesis and Characterization of Polydopamine‐Modified Montmorillonite Loaded with Silver Nanoparticles for Antibacterial Functionalization
Since the development of bacterial resistance towards antibiotics has the potential to limit the effectiveness of antibiotics in the treatment of infectious diseases, it is necessary to try different strategies to provide alternatives. In order to solve the problems, this work used silver nanoparticles‐loaded polydopamine‐modified montmorillonite (AgNP/PDA−Mt) to cope with the infection of the gram‐negative bacteria Escherichia. Coli and the gram‐positive bacteria Staphylococcus. aureus . Polydopamine‐modified montmorillonite (PDA−Mt) was used to reduce silver ions into silver nanoparticles through the hydroxyl groups of polydopamine. The chemical properties and morphology of AgNP/PDA−Mt were analyzed by X‐ray diffraction spectroscopy (XRD), fourier transform infrared spectroscopy (FT‐IR), transmission electron microscope (TEM), scanning electron microscope (SEM), etc. Also, its antimicrobial property has been investigated. The results showed that AgNP/PDA−Mt possessed significant sterilization at low doses. And the results had been shown its acceptable biocompatibility.
- 22 February 2023
- Published by Wiley in ChemistrySelect
- Vol. 8 (8)
Synthesis and Characterization of Polydopamine‐Modified Montmorillonite Loaded with Silver Nanoparticles for Antibacterial Functionalization
Since the development of bacterial resistance towards antibiotics has the potential to limit the effectiveness of antibiotics in the treatment of infectious diseases, it is necessary to try different strategies to provide alternatives. In order to solve the problems, this work used silver nanoparticles‐loaded polydopamine‐modified montmorillonite (AgNP/PDA−Mt) to cope with the infection of the gram‐negative bacteria Escherichia. Coli and the gram‐positive bacteria Staphylococcus. aureus . Polydopamine‐modified montmorillonite (PDA−Mt) was used to reduce silver ions into silver nanoparticles through the hydroxyl groups of polydopamine. The chemical properties and morphology of AgNP/PDA−Mt were analyzed by X‐ray diffraction spectroscopy (XRD), fourier transform infrared spectroscopy (FT‐IR), transmission electron microscope (TEM), scanning electron microscope (SEM), etc. Also, its antimicrobial property has been investigated. The results showed that AgNP/PDA−Mt possessed significant sterilization at low doses. And the results had been shown its acceptable biocompatibility.
- 2 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 10 (15) , 2865-2874
A multifunctional carbon dot-based nanoplatform for bioimaging and quaternary ammonium salt/photothermal synergistic antibacterial therapy
The emergence of drug resistance and superbugs poses a devastating threat to public health and can even lead to death. Thus, it is significant to develop a novel antibacterial agent to combat bacterial infections. Herein, we developed quaternary ammonium salt (QAS) modified near-infrared carbon dots (RCDs-C35), which possesses synergistic antibacterial performance under 808 nm irradiation. This nanocomposite exhibits excellent photothermal performance and the photothermal conversion efficiency (PCE) could reach 35%. Generally speaking, the bacterial membrane sensitivity to hyperthermia would be enhanced after QAS caused the initial damage, and thus it can more easily cause bacterial inactivation after irradiation. In vitro and in vivo experiments indicated that the RCDs-C35 exhibit excellent biocompatibility, predominant synergistic antibacterial performance, and the capability of promoting wound healing. The antibacterial ratio against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) could reach 99.5% and 99.8%, respectively, after 808 nm irradiation. Additionally, the cellular imaging indicated that the RCDs-C35 could be used as a fluorescent probe in bioimaging. Therefore, RCDs-C35 with synergistic antibacterial performance and inherent luminescence possess great potential for application in the biomedical field.
- 2 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 10 (15) , 2865-2874
A multifunctional carbon dot-based nanoplatform for bioimaging and quaternary ammonium salt/photothermal synergistic antibacterial therapy
The emergence of drug resistance and superbugs poses a devastating threat to public health and can even lead to death. Thus, it is significant to develop a novel antibacterial agent to combat bacterial infections. Herein, we developed quaternary ammonium salt (QAS) modified near-infrared carbon dots (RCDs-C35), which possesses synergistic antibacterial performance under 808 nm irradiation. This nanocomposite exhibits excellent photothermal performance and the photothermal conversion efficiency (PCE) could reach 35%. Generally speaking, the bacterial membrane sensitivity to hyperthermia would be enhanced after QAS caused the initial damage, and thus it can more easily cause bacterial inactivation after irradiation. In vitro and in vivo experiments indicated that the RCDs-C35 exhibit excellent biocompatibility, predominant synergistic antibacterial performance, and the capability of promoting wound healing. The antibacterial ratio against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) could reach 99.5% and 99.8%, respectively, after 808 nm irradiation. Additionally, the cellular imaging indicated that the RCDs-C35 could be used as a fluorescent probe in bioimaging. Therefore, RCDs-C35 with synergistic antibacterial performance and inherent luminescence possess great potential for application in the biomedical field.
- 9 January 2020
- Published by Wiley in Polymer Composites
- Vol. 41 (5) , 1979-1985
Montmorillonite‐lecithin‐heparin/PDMS films with enhanced mechanical and antithrombogenic properties
This study developed a polymer/layered silicate film as blood‐contacting devices. First, the lecithin‐heparin (LEC‐HEP) was used to modify pristine montmorillonite (MMT). LEC‐HEP was successfully exchanged in the MMT. The organically modified MMT was used for the synthesis of poly(dimethylsiloxane) (PDMS)/MMT‐LEC‐HEP films by intercalation solution technique. The morphological, structural of the prepared film were evaluated using X‐ray diffraction, scanning electron microscopy. LEC‐HEP‐MMT concentration of 0.5 wt% in PDMS systems enhanced mechanical properties. The hemocompatibility of PDMS/LEC‐HEP‐MMT films was evaluated by hemolysis assay, dynamic coagulation time, and plasma recalcification time (PRT). PDMS/0.5 wt% LEC‐HEP‐MMT films also exhibited higher blood anticoagulant indexes, longer the PRT and lower hemolysis rate than the corresponding PDMS film.
- 9 January 2020
- Published by Wiley in Polymer Composites
- Vol. 41 (5) , 1979-1985
Montmorillonite‐lecithin‐heparin/PDMS films with enhanced mechanical and antithrombogenic properties
This study developed a polymer/layered silicate film as blood‐contacting devices. First, the lecithin‐heparin (LEC‐HEP) was used to modify pristine montmorillonite (MMT). LEC‐HEP was successfully exchanged in the MMT. The organically modified MMT was used for the synthesis of poly(dimethylsiloxane) (PDMS)/MMT‐LEC‐HEP films by intercalation solution technique. The morphological, structural of the prepared film were evaluated using X‐ray diffraction, scanning electron microscopy. LEC‐HEP‐MMT concentration of 0.5 wt% in PDMS systems enhanced mechanical properties. The hemocompatibility of PDMS/LEC‐HEP‐MMT films was evaluated by hemolysis assay, dynamic coagulation time, and plasma recalcification time (PRT). PDMS/0.5 wt% LEC‐HEP‐MMT films also exhibited higher blood anticoagulant indexes, longer the PRT and lower hemolysis rate than the corresponding PDMS film.