Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Min Wang has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Novel Design of Torsional Hollow Shafts with Acoustic Black Hole Profile for Vibration Attenuation

    by Kui-Yang Gao, Guo-Feng Yao, Min Wang, Jun-Lin Chen, Pei-Lei Zhou, Zhi-Wen Xu

    The torsional vibration phenomenon is a common issue in various transmission systems, such as vehicles, machinery, marine, aviation, and aerospace. Serious torsional resonance may generate additional cyclic stress in the transmission system in operation, subsequently leading to damage or failure. In this paper, a novel torsional hollow stepped shaft design method is proposed to effectively attenuate the torsional vibration amplitude, inspired by the bending beam with the acoustic black hole (ABH) profile. By comparing the dynamic equations of the bending beam to the torsional shaft with the ABH profile, it can be concluded that both dynamic equations exhibit similarities. Three types of torsional shafts with the ABH profile are designed and fabricated by additive manufacturing (AM). Transient torsional experiments are conducted with a high-torque torsional experimental apparatus, and amplitude attenuation characteristics are investigated by the finite element method (FEM), with solutions compared against experimental results. The comparison between the shaft with epoxy resin and the pure aluminum alloy shaft further confirms that the power law cross-section with an ABH profile is the primary mechanism for vibration attenuation, while the epoxy resin merely plays a supplementary role. Accordingly, three engineering torsional shafts with the ABH profile are designed and subjected to numerical solutions. Results indicate that torsional natural frequencies of all three novel shafts are significantly reduced compared to conventional shafts. Moreover, whether subjected to the periodic impact load or the irregular transient load, all three novel shafts present significant vibration attenuation advantages, which can be flexibly selected under the different operating conditions.

  • Open Access

    Partial Natural Torsional Frequency Modification of Vehicle Driveline Considering Modal Damping

    by Kui-Yang Gao, Guo-Feng Yao, Min Wang, Jun-Lin Chen, Zhi-Wen Xu

    Torsional resonance is a common phenomenon in engineering vehicle drivelines. To avoid the influence of resonance on the driveline, it is typical to modify the frequency. However, traditional frequency modification methods cannot precisely achieve expected frequencies while keeping others unchanged. They often cause frequency ‘overflow’ and fail to account for the influence of modal damping on drivelines. To address the issues above, a passive modification method is proposed to modify the natural frequencies of engineering vehicle drivelines, considering modal damping. In this paper, the dynamic equations for gears and shafts are derived by a lumped-parameter model that employs the Lagrange method to establish a reasonably equivalent model as a serial-parallel system consisting of (moment of inertia)-(torsional spring)-(torsional damper) with free boundary conditions. Additionally, the passive structural modification for the partial eigenvalue assignment (PEVAPSM) method is employed to modify the specified partial natural torsional frequencies to realizable expected values, while others remain unchanged. The modal damping of the original driveline is modified based on the orthogonal decomposition method. Finally, the practical applicability of the method proposed in this paper is demonstrated through a specific example. Results indicate that the PEVAPSM method has been successfully extended and supplemented from a theoretical translational system, ignoring modal damping, to a practical torsional system considering modal damping to modify natural frequencies of the structure. The improved PEVAPSM method enables to precisely determine the moment of inertia and modal damping of gears in the driveline, preventing resonance with other structures at the same frequency. It offers valuable guidance for studying the torsional vibration characteristics of engineering vehicle drivelines.

  • Open Access

    An Effective Method for Calculation of Mutual Inductance Between Rectangular Coils at Arbitrary Positions in Space

    by Junlin Chen, Guofeng Yao, Min Wang, Liming Zhou, Kuiyang Gao, Peilei Zhou, Ruiyao Liu

    Electromagnetic torques generated by mutual inductance between energized coils are widely used in aerospace applications, especially for solar panel deployment. Accurate and rapid acquisition of mutual inductance between coils is essential to provide the necessary electromagnetic force. Therefore, based on the Kalantarov–Zeitlin method and the Neumann formula, this paper presents a straightforward and efficient calculation method for mutual inductance between rectangular coils positioned arbitrarily in space. Building on this foundation, we develop a calculation method for mutual inductance between rectangular multi-turn coils using the principle of superposition. The accuracy of the proposed method’s calculations is validated using data from the published literature, and the computation time is compared with that of other methods. To further validate the accuracy of the computational method proposed in this paper, a rectangular multi-turn coil mutual inductance measurement platform has been constructed. The results indicate that the computation time of the proposed method is shorter, and the calculation outcomes closely align with those obtained from other methods as well as experimental measurements. Furthermore, the calculation accuracy exceeds 95%, providing a reliable basis for determining the electromagnetic force required for the deployment of the solar array driven by electromagnetism.


  • A compliant contact force model for the frictionless impact analysis

    by Huili Huang, Guofeng Yao, Jianhong Hou, Yuancheng Zhu, Min Wang


  • A Normal Contact Force Model for Impact Analysis of Viscoelastic Materials with Elastic Aftereffect

    by Huili Huang, Guofeng Yao, Jianhong Hou, Min Wang

    A normal contact force model is proposed to describe the elastic aftereffect phenomenon of viscoelastic materials under low-speed impact. The model considers the damping effect of the material during the restitution phase and can effectively simulate the contact impact of viscoelastic materials with elastic aftereffect. When deriving the key parameter hysteresis damping coefficient in the normal contact force model, an exact implicit solution for the hysteresis damping coefficient is theoretically obtained based on the precise numerical relationship between relative deformation and relative velocity. The effectiveness of the normal model is verified by the impact test results of the published superball, and is also compared with Wang and Hua model. The results indicate that the normal model is much closer to the experimental results than Wang and Hua model, especially in the restitution phase. Compared with the remaining surface deformation, the restitution coefficient has a more significant effect on the dynamic behavior of the system.


  • A general continuous contact force model for contact collisions of soft and hard materials

    by Hui-Li Huang, Guo-Feng Yao, Min Wang, Jian-Hong Hou, Yuan-Cheng Zhu


  • Open Access

    Design and Analysis of a New Semiactive Hydraulic Mount for a Wide-Range Tunable Damping without Magneto-Rheological/Electric-Rheological Fluid

    by Yuan-Cheng Zhu, Guo-Feng Yao, Min Wang, Hang Yu, Kui-Yang Gao, Pei-Lei Zhou

    A hydraulic engine mount (HEM) is an advanced tuned mass damper (TMD) system used to isolate the noise and vibration from the engine to the chassis. This paper aims to design a semiactive HEM based on the TMD model, which only tunes damping without affecting the other lumped parameters of the TMD system. Firstly, the dynamic equations of an HEM modeled as a TMD system are derived based on the linear lumped parameter model (LPM). Each lumped parameter of the HEM is analyzed to identify the relevant parameters that affect damping. Secondly, a newly designed semiactive HEM design is proposed that utilizes a helical moving plate to simultaneously control both the inertia track area and length, resulting in precise damping tuning. To illustrate the dynamic performance of the newly designed HEM, calculations are presented based on various parameters for its tunable damping range and dynamic stiffness spectrum. Additionally, to demonstrate the performance of vibration isolation, this paper determines the optimal length and dynamic stiffness of the inertia track to minimize the transmissibility. Thirdly, to reveal the superiority of the newly designed HEM over the MR fluid mount, an example is presented where the MR fluid medium is used in place of conventional hydraulic fluid in the HEM while keeping all other parameters constant. Specifically, the novel semiactive HEM employs conventional hydraulic fluid and is spiral-driven by a moving plate while the MR fluid-based HEM is controlled by an additional tunable magnetic intensity controller. The nonlinear LPM of the newly designed HEM is verified by comparing the dynamic stiffness spectrum with the experimental results in the published literature. Then, the nonlinear LPM of the MR fluid mount is established, and its dynamic stiffness spectrum is calculated and compared with that of the newly designed HEM. The results indicate that the newly designed HEM and MR fluid mount have similar ranges of dynamic stiffness control, but the newly designed HEM does not require expensive MR/ER fluid or additional continuous external energy input to regulate the dynamic stiffness. Moreover, when using inexpensive low-viscosity hydraulic fluid, the newly designed HEM can provide a wider range of dynamic stiffness control.


  • Open Access

    An Adaptive Subinterval Finite Element Method Based on Dynamic Sensitivity Analysis for Structures with Uncertain-but-Bounded Parameters

    by Mian Huang, Guofeng Yao, Kuiyang Gao, Min Wang

    To overcome computational inefficiency of the traditional subinterval finite element method, a novel adaptive subinterval finite element method based on dynamic sensitivity analysis is proposed to evaluate static response bounds of structures with uncertain-but-bounded parameters. Firstly, the original interval is divided into subintervals, and expansion routes for each displacement component are constructed based on dynamic sensitivity analysis. Then, the structural response bounds are analysed using a modified interval finite element method within each subinterval on the expansion route. Finally, the bounds of all displacement components are obtained via the interval union operation. To determine the appropriate number of subintervals, an adaptive convergence mechanism is proposed. The proposed method has accuracy and efficiency advantages over traditional subinterval finite element methods. The accuracy and effectiveness of this method are verified via numerical calculations of a nine-bar truss and an impeller.