Yingcai Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yingcai Wang has a total of 166 co-authors. Here are the top co-authors by number of shared publications:
Zhibin Zhang
41 shared publicationsYunhai Liu
37 shared publicationsZhimin Dong
28 shared publicationsYuhui Liu
25 shared publications- Yunhai Liu
National Key Laboratory of Uranium Resources Exploration‐Mining and Nuclear Remote Sensing East China University of Technology Nanchang Jiangxi 330013 P.R. China
24 shared publications Xiaohong Cao
23 shared publications
Latest Publications
- 10 November 2026
- Published by Elsevier in Journal of Cleaner Production
- Vol. 585
Light-enhanced synchronous capture of uranium and iodine using Ag-doped amidoxime-functionalized carbon nanotube composites
- 10 November 2026
- Published by Elsevier in Journal of Cleaner Production
- Vol. 585
Light-enhanced synchronous capture of uranium and iodine using Ag-doped amidoxime-functionalized carbon nanotube composites
- Open Access
- 1 October 2026
- Published by Elsevier in SSRN Electronic Journal
Parallel immobilization mechanisms of iodide and lanthanide fission products in metal-doped 4A molecular sieve under LiCl-KCl molten-salt pyroprocessing conditions
Closed‐cycle pyroprocessing represents a promising sustainable route for spent nuclear fuel recycling, yet the simultaneous capture of anionic iodine‐129 and multivalent lanthanide fission products from high‐temperature LiCl‐KCl molten salt remains a major bottleneck restricting waste minimisation and industrial deployment. Herein, we report Ag‐, Cu‐, Bi‐ and Pb‐co‐doped 4A zeolite adsorbents (4A‐M) prepared via a facile liquid‐phase ion‐exchange strategy for bifunctional sequestration of iodide (I-), neodymium (Nd3+) and thulium (Tm3+) within 773–848 K eutectic molten salt. XRF, XRD and thermogravimetric analyses confirm retention of the LTA zeolite framework and excellent thermal stability up to 800 °C. Single‐component Nd³⁺ adsorption follows pseudo‐second‐order chemisorption and exhibits weak temperature dependence; heavy‐metal dopants introduce tunable pore‐window steric hindrance to modulate ion‐selective transport without lattice degradation. In complex ternary I⁻/Nd³⁺/Tm³⁺ molten‐salt media, these functionalised zeolites realise synchronous removal of both anionic and cationic fission products. Complementary XRD, XPS and SEM‐EDS characterisations disclose two independent parallel pathways inside sub‐nanometre cages: metal‐iodide precipitation for iodine immobilisation and ion‐exchange‐triggered in‐situ rare‐earth oxide mineralisation for lanthanide entrapment. This work delivers a robust bifunctional material and mechanistic understanding to advance low‐waste purification technologies for sustainable advanced nuclear fuel cycles.
- 1 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessParallel immobilization mechanisms of iodide and lanthanide fission products in metal-doped 4A molecular sieve under LiCl-KCl molten-salt pyroprocessing conditions
Closed‐cycle pyroprocessing represents a promising sustainable route for spent nuclear fuel recycling, yet the simultaneous capture of anionic iodine‐129 and multivalent lanthanide fission products from high‐temperature LiCl‐KCl molten salt remains a major bottleneck restricting waste minimisation and industrial deployment. Herein, we report Ag‐, Cu‐, Bi‐ and Pb‐co‐doped 4A zeolite adsorbents (4A‐M) prepared via a facile liquid‐phase ion‐exchange strategy for bifunctional sequestration of iodide (I-), neodymium (Nd3+) and thulium (Tm3+) within 773–848 K eutectic molten salt. XRF, XRD and thermogravimetric analyses confirm retention of the LTA zeolite framework and excellent thermal stability up to 800 °C. Single‐component Nd³⁺ adsorption follows pseudo‐second‐order chemisorption and exhibits weak temperature dependence; heavy‐metal dopants introduce tunable pore‐window steric hindrance to modulate ion‐selective transport without lattice degradation. In complex ternary I⁻/Nd³⁺/Tm³⁺ molten‐salt media, these functionalised zeolites realise synchronous removal of both anionic and cationic fission products. Complementary XRD, XPS and SEM‐EDS characterisations disclose two independent parallel pathways inside sub‐nanometre cages: metal‐iodide precipitation for iodine immobilisation and ion‐exchange‐triggered in‐situ rare‐earth oxide mineralisation for lanthanide entrapment. This work delivers a robust bifunctional material and mechanistic understanding to advance low‐waste purification technologies for sustainable advanced nuclear fuel cycles.
- Open Access
- 24 September 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Synergistic electrochemical and adsorptive removal of lanthanides for sustainable spent nuclear fuel pyroprocessing
- 24 September 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessSynergistic electrochemical and adsorptive removal of lanthanides for sustainable spent nuclear fuel pyroprocessing
- Open Access
- 28 August 2026
- Published by Elsevier in SSRN Electronic Journal
Molten salt electrolysis coupled with molecular sieve high-temperature adsorption for ultra-deep removal of zirconium and lanthanides in spent fuel pyroprocessing
Zirconium (Zr) originating from fuel cladding poses severe interference to the separation of actinide elements and elevates the radioactivity of nuclear waste during spent fuel reprocessing. Traditional molten salt electrolysis is incapable of deep Zr removal, owing to a substantial decline in current efficiency even at low Zr ion concentrations during electrolytic reactions. This study proposes a novel synergistic thermochemical sequential process integrating molten salt electrolysis with high-temperature 5A molecular sieve adsorption for the deep separation of Zr from LiCl-KCl spent fuel molten salts. Cyclic voltammetry, square wave voltammetry, and open-circuit chronopotentiometry were employed to systematically investigate the electrochemical redox behaviors, mass transfer kinetics, and thermodynamic characteristics of Zn(II) and Zr(IV), on the basis of which electrochemical extraction experiments were conducted. A zirconium recovery rate of 95.83% was achieved via single-step constant-current electrolysis. Benefiting from the synergistic effect between electrolysis and adsorption, the integrated process delivers an overall Zr removal efficiency of over 99.99%, which remarkably outperforms conventional single separation technologies reported in existing literature. Subsequent high-temperature adsorption experiments verified the excellent affinity of 5A molecular sieves for Zr(IV), with adsorption equilibrium reached within 40-50 min and a sustained Zr removal efficiency above 96% (maximum 99.91%). For multi-component molten salt systems containing typical fission rare earth elements (Nd, Tb, Ho, Tm), the removal rates of all target metal ions exceeded 91%. This synergistic thermochemical strategy provides an innovative and efficient technical approach for the high-efficiency removal of zirconium and lanthanide elements in dry spent fuel reprocessing.
- 28 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMolten salt electrolysis coupled with molecular sieve high-temperature adsorption for ultra-deep removal of zirconium and lanthanides in spent fuel pyroprocessing
Zirconium (Zr) originating from fuel cladding poses severe interference to the separation of actinide elements and elevates the radioactivity of nuclear waste during spent fuel reprocessing. Traditional molten salt electrolysis is incapable of deep Zr removal, owing to a substantial decline in current efficiency even at low Zr ion concentrations during electrolytic reactions. This study proposes a novel synergistic thermochemical sequential process integrating molten salt electrolysis with high-temperature 5A molecular sieve adsorption for the deep separation of Zr from LiCl-KCl spent fuel molten salts. Cyclic voltammetry, square wave voltammetry, and open-circuit chronopotentiometry were employed to systematically investigate the electrochemical redox behaviors, mass transfer kinetics, and thermodynamic characteristics of Zn(II) and Zr(IV), on the basis of which electrochemical extraction experiments were conducted. A zirconium recovery rate of 95.83% was achieved via single-step constant-current electrolysis. Benefiting from the synergistic effect between electrolysis and adsorption, the integrated process delivers an overall Zr removal efficiency of over 99.99%, which remarkably outperforms conventional single separation technologies reported in existing literature. Subsequent high-temperature adsorption experiments verified the excellent affinity of 5A molecular sieves for Zr(IV), with adsorption equilibrium reached within 40-50 min and a sustained Zr removal efficiency above 96% (maximum 99.91%). For multi-component molten salt systems containing typical fission rare earth elements (Nd, Tb, Ho, Tm), the removal rates of all target metal ions exceeded 91%. This synergistic thermochemical strategy provides an innovative and efficient technical approach for the high-efficiency removal of zirconium and lanthanide elements in dry spent fuel reprocessing.
- Open Access
- 24 August 2026
- Published by Elsevier in SSRN Electronic Journal
Amidoxime-grafted carbon nanotubes via alkali etching for high-efficiency separation and recovery of uranium from radioactive wastewater
Efficient remediation of uranium-bearing wastewater and recovery of uranium resources are critical priorities for sustainable nuclear energy development and ecological safety. Carbon nanotubes (CNTs) are promising adsorbent candidates owing to their high specific surface area and excellent chemical stability, but their practical uranium removal performance is restricted by insufficient active sites and poor target selectivity. Herein, amidoxime-functionalized multi-walled carbon nanotubes (CNT-AO) were rationally fabricated via carboxyl activation, amidation-mediated covalent grafting, and π–π stacking interactions, followed by NaOH etching to optimize the porous architecture. The morphological, structural, surface chemical, and thermal properties were systematically characterized. Batch adsorption experiments demonstrate that CNT-AO achieves a maximum uranium removal efficiency of 98% at the optimal pH of 6. The adsorption kinetics conform well to the pseudo-second-order model, indicating a chemisorption-dominated process. The Freundlich isotherm provides a superior fit to equilibrium data, suggesting heterogeneous multilayer adsorption, with a Langmuir-derived maximum monolayer capacity of 239.81 mg g-1. CNT-AO retains 82.31% of its initial adsorption efficiency after five consecutive cycles and exhibits excellent selectivity for uranyl ions against common competing cations. The superior performance arises from the synergistic effect of hierarchical pore structure for facilitated mass transfer and strong specific coordination between uranyl ions and N/O-containing amidoxime groups. This work confirms that CNT-AO is a robust, recyclable adsorbent with great application potential for uranium wastewater treatment and resource recovery.
- 24 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAmidoxime-grafted carbon nanotubes via alkali etching for high-efficiency separation and recovery of uranium from radioactive wastewater
Efficient remediation of uranium-bearing wastewater and recovery of uranium resources are critical priorities for sustainable nuclear energy development and ecological safety. Carbon nanotubes (CNTs) are promising adsorbent candidates owing to their high specific surface area and excellent chemical stability, but their practical uranium removal performance is restricted by insufficient active sites and poor target selectivity. Herein, amidoxime-functionalized multi-walled carbon nanotubes (CNT-AO) were rationally fabricated via carboxyl activation, amidation-mediated covalent grafting, and π–π stacking interactions, followed by NaOH etching to optimize the porous architecture. The morphological, structural, surface chemical, and thermal properties were systematically characterized. Batch adsorption experiments demonstrate that CNT-AO achieves a maximum uranium removal efficiency of 98% at the optimal pH of 6. The adsorption kinetics conform well to the pseudo-second-order model, indicating a chemisorption-dominated process. The Freundlich isotherm provides a superior fit to equilibrium data, suggesting heterogeneous multilayer adsorption, with a Langmuir-derived maximum monolayer capacity of 239.81 mg g-1. CNT-AO retains 82.31% of its initial adsorption efficiency after five consecutive cycles and exhibits excellent selectivity for uranyl ions against common competing cations. The superior performance arises from the synergistic effect of hierarchical pore structure for facilitated mass transfer and strong specific coordination between uranyl ions and N/O-containing amidoxime groups. This work confirms that CNT-AO is a robust, recyclable adsorbent with great application potential for uranium wastewater treatment and resource recovery.
- Open Access
- 28 July 2026
- Published by Elsevier in SSRN Electronic Journal
Molten salt electrolysis coupled with 5A molecular sieve high-temperature adsorption for ultra-deep removal of zirconium and lanthanides in spent fuel pyroprocessing
Zirconium (Zr) originating from fuel cladding poses severe interference to the separation of actinide elements and elevates the radioactivity of nuclear waste during spent fuel reprocessing. Traditional molten salt electrolysis is incapable of deep Zr removal, owing to a substantial decline in current efficiency even at low Zr ion concentrations during electrolytic reactions. This study proposes a novel synergistic thermochemical sequential process integrating molten salt electrolysis with high-temperature 5A molecular sieve adsorption for the deep separation of Zr from LiCl-KCl spent fuel molten salts. Cyclic voltammetry, square wave voltammetry, and open-circuit chronopotentiometry were employed to systematically investigate the electrochemical redox behaviors, mass transfer kinetics, and thermodynamic characteristics of Zn(II) and Zr(IV), on the basis of which electrochemical extraction experiments were conducted. A zirconium recovery rate of 95.83% was achieved via single-step constant-current electrolysis. Benefiting from the synergistic effect between electrolysis and adsorption, the integrated process delivers an overall Zr removal efficiency of over 99.99%, which remarkably outperforms conventional single separation technologies reported in existing literature. Subsequent high-temperature adsorption experiments verified the excellent affinity of 5A molecular sieves for Zr(IV), with adsorption equilibrium reached within 40-50 min and a sustained Zr removal efficiency above 96% (maximum 99.91%). For multi-component molten salt systems containing typical fission rare earth elements (Nd, Tb, Ho, Tm), the removal rates of all target metal ions exceeded 91%. This synergistic thermochemical strategy provides an innovative and efficient technical approach for the high-efficiency removal of zirconium and lanthanide elements in dry spent fuel reprocessing.
- 28 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMolten salt electrolysis coupled with 5A molecular sieve high-temperature adsorption for ultra-deep removal of zirconium and lanthanides in spent fuel pyroprocessing
Zirconium (Zr) originating from fuel cladding poses severe interference to the separation of actinide elements and elevates the radioactivity of nuclear waste during spent fuel reprocessing. Traditional molten salt electrolysis is incapable of deep Zr removal, owing to a substantial decline in current efficiency even at low Zr ion concentrations during electrolytic reactions. This study proposes a novel synergistic thermochemical sequential process integrating molten salt electrolysis with high-temperature 5A molecular sieve adsorption for the deep separation of Zr from LiCl-KCl spent fuel molten salts. Cyclic voltammetry, square wave voltammetry, and open-circuit chronopotentiometry were employed to systematically investigate the electrochemical redox behaviors, mass transfer kinetics, and thermodynamic characteristics of Zn(II) and Zr(IV), on the basis of which electrochemical extraction experiments were conducted. A zirconium recovery rate of 95.83% was achieved via single-step constant-current electrolysis. Benefiting from the synergistic effect between electrolysis and adsorption, the integrated process delivers an overall Zr removal efficiency of over 99.99%, which remarkably outperforms conventional single separation technologies reported in existing literature. Subsequent high-temperature adsorption experiments verified the excellent affinity of 5A molecular sieves for Zr(IV), with adsorption equilibrium reached within 40-50 min and a sustained Zr removal efficiency above 96% (maximum 99.91%). For multi-component molten salt systems containing typical fission rare earth elements (Nd, Tb, Ho, Tm), the removal rates of all target metal ions exceeded 91%. This synergistic thermochemical strategy provides an innovative and efficient technical approach for the high-efficiency removal of zirconium and lanthanide elements in dry spent fuel reprocessing.
- Open Access
- 17 July 2026
- Published by Elsevier in SSRN Electronic Journal
Synergistic Electrochemical and Adsorptive Removal of Lanthanides for Sustainable Spent Nuclear Fuel Pyroprocessing
Lanthanides act as strong neutron poisons in spent nuclear fuel reprocessing, severely hindering actinide transmutation and fuel recycling. Conventional pyrochemical processes suffer from low late-stage current efficiency and escalating salt costs, creating a critical bottleneck for industrial deployment. Here we present a hybrid strategy coupling cathodic deposition and high-temperature ion exchange for ultra-efficient lanthanide removal from LiCl–KCl molten salt. Using Ce as a model lanthanide, its electrochemical behavior on liquid Pb electrodes is systematically investigated. Ce(III) is reduced via a three-electron transfer process to form stable CePb3 intermetallic compounds, achieving an average extraction efficiency of 94.23%. Subsequent high-temperature adsorption with 4A molecular sieves follows pseudo-second-order kinetics, governed by ion exchange and internal diffusion, delivering a Ce(III) removal efficiency up to 97.75% and a maximum adsorption capacity of 38.80 mg g-1. The combined system attains an overall lanthanide removal rate of 99.87%, and removal efficiencies exceed 94% for all lanthanides (Ce, Pr, Nd, Ho, Tm) in multi-element systems. This synergistic approach markedly improves process efficiency, reduces energy and salt consumption, and enables direct solidification of loaded molecular sieves. Our modular, scalable hybrid technique provides a cost-effective, sustainable route for lanthanide separation in spent fuel pyroprocessing and radioactive molten salt recycling, supporting the development of closed nuclear fuel cycles and low-carbon nuclear energy systems.
- 17 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSynergistic Electrochemical and Adsorptive Removal of Lanthanides for Sustainable Spent Nuclear Fuel Pyroprocessing
Lanthanides act as strong neutron poisons in spent nuclear fuel reprocessing, severely hindering actinide transmutation and fuel recycling. Conventional pyrochemical processes suffer from low late-stage current efficiency and escalating salt costs, creating a critical bottleneck for industrial deployment. Here we present a hybrid strategy coupling cathodic deposition and high-temperature ion exchange for ultra-efficient lanthanide removal from LiCl–KCl molten salt. Using Ce as a model lanthanide, its electrochemical behavior on liquid Pb electrodes is systematically investigated. Ce(III) is reduced via a three-electron transfer process to form stable CePb3 intermetallic compounds, achieving an average extraction efficiency of 94.23%. Subsequent high-temperature adsorption with 4A molecular sieves follows pseudo-second-order kinetics, governed by ion exchange and internal diffusion, delivering a Ce(III) removal efficiency up to 97.75% and a maximum adsorption capacity of 38.80 mg g-1. The combined system attains an overall lanthanide removal rate of 99.87%, and removal efficiencies exceed 94% for all lanthanides (Ce, Pr, Nd, Ho, Tm) in multi-element systems. This synergistic approach markedly improves process efficiency, reduces energy and salt consumption, and enables direct solidification of loaded molecular sieves. Our modular, scalable hybrid technique provides a cost-effective, sustainable route for lanthanide separation in spent fuel pyroprocessing and radioactive molten salt recycling, supporting the development of closed nuclear fuel cycles and low-carbon nuclear energy systems.
- Open Access
- 9 July 2026
- Published by Elsevier in SSRN Electronic Journal
An Electrolysis - Ion Exchange Coupling Strategy for Lanthanide Removal and Molten Salt Recycling
The industrial application of spent fuel dry reprocessing is severely restricted by low reduction efficiency and challenging purification of waste molten salt. Herein, we report a novel strategy that integrates high-temperature electrolysis with ion exchange technology to address these critical challenges. In LiCl–KCl molten salt, 95.75% of holmium (Ho, a representative lanthanide) can be extracted in the form of Cu–Ho alloy via potentiostatic electrolysis. Residual Ho in the molten salt was further purified via ion-exchange adsorption using 5A molecular sieve, increasing the total removal efficiency to 99.97%. Electrochemical characterizations (CV, OCP, SWV) confirmed that the electroreduction of Ho(III) follows a diffusion-controlled kinetic process, and the related thermodynamic parameters were determined. XRD verified that the main products are intermetallic compounds CuHo, Cu2Ho, and Cu5Ho. XPS and molecular dynamics simulations revealed that Ho3+ ions are selectively enriched in the molecular sieve via ion exchange with Ca2+/Na+ ions. Collectively, electrolysis enables efficient recovery of high-concentration lanthanides from molten salts, while ion-exchange adsorption overcomes the sharp decline in electroreduction efficiency at low lanthanide concentrations and achieves deep removal of residual ions. This electrolysis–ion exchange coupling strategy provides a promising technical route for fission product recovery and waste salt recycling in spent fuel dry reprocessing.
- 9 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAn Electrolysis - Ion Exchange Coupling Strategy for Lanthanide Removal and Molten Salt Recycling
The industrial application of spent fuel dry reprocessing is severely restricted by low reduction efficiency and challenging purification of waste molten salt. Herein, we report a novel strategy that integrates high-temperature electrolysis with ion exchange technology to address these critical challenges. In LiCl–KCl molten salt, 95.75% of holmium (Ho, a representative lanthanide) can be extracted in the form of Cu–Ho alloy via potentiostatic electrolysis. Residual Ho in the molten salt was further purified via ion-exchange adsorption using 5A molecular sieve, increasing the total removal efficiency to 99.97%. Electrochemical characterizations (CV, OCP, SWV) confirmed that the electroreduction of Ho(III) follows a diffusion-controlled kinetic process, and the related thermodynamic parameters were determined. XRD verified that the main products are intermetallic compounds CuHo, Cu2Ho, and Cu5Ho. XPS and molecular dynamics simulations revealed that Ho3+ ions are selectively enriched in the molecular sieve via ion exchange with Ca2+/Na+ ions. Collectively, electrolysis enables efficient recovery of high-concentration lanthanides from molten salts, while ion-exchange adsorption overcomes the sharp decline in electroreduction efficiency at low lanthanide concentrations and achieves deep removal of residual ions. This electrolysis–ion exchange coupling strategy provides a promising technical route for fission product recovery and waste salt recycling in spent fuel dry reprocessing.
- Open Access
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
Interfacial Electron Transfer Pathway Regulation via Inner Sphere Coupling on Single Atom Interfaces for Uranium Recovery from Complex Tailing Effluents
Selective uranium recovery from tailings reservoir effluents remains challenging because soluble U(VI) species must be captured and reduced in chemically complex matrices containing abundant competing ions and parasitic electrochemical reactions. The central difficulty is therefore not merely uranyl adsorption, but regulation of the electrode–solution interfacial electron transfer pathway that governs U(VI)–to–U(IV) conversion. Here, we develop a single atom interfacial regulation strategy using atomically dispersed Fe–N–C electrodes in a hybrid capacitive deionization system. Electrochemical polarization induces interfacial water dissociation at Fe–N4 centers, forming stabilized Fe–OH motifs that function as coordination anchors and proton electron relay sites. These motifs establish a confined Fe–O–U inner sphere coupling pathway, which directs electron transfer toward stepwise uranyl reduction rather than nonspecific ion accumulation or competing side reactions. The Fe–N–C electrode delivers a uranium uptake capacity of 676.8 mg g⁻1 and retains 82.3% recovery efficiency in saline uranium tailings reservoir effluents, confirming its effectiveness under environmentally relevant conditions. Post reaction spectroscopic analyses verify U(IV) rich uranium immobilization, while first-principles calculations and ab initio molecular dynamics simulations identify Fe–OH as the thermodynamically favored interfacial state responsible for polarized Fe–O–U coupling and inner-sphere electron transfer. This study demonstrates that regulating inner sphere electron transfer pathways on single atom interfaces provides a mechanistic basis for selective uranium reduction and recovery from complex radioactive wastewaters.
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInterfacial Electron Transfer Pathway Regulation via Inner Sphere Coupling on Single Atom Interfaces for Uranium Recovery from Complex Tailing Effluents
Selective uranium recovery from tailings reservoir effluents remains challenging because soluble U(VI) species must be captured and reduced in chemically complex matrices containing abundant competing ions and parasitic electrochemical reactions. The central difficulty is therefore not merely uranyl adsorption, but regulation of the electrode–solution interfacial electron transfer pathway that governs U(VI)–to–U(IV) conversion. Here, we develop a single atom interfacial regulation strategy using atomically dispersed Fe–N–C electrodes in a hybrid capacitive deionization system. Electrochemical polarization induces interfacial water dissociation at Fe–N4 centers, forming stabilized Fe–OH motifs that function as coordination anchors and proton electron relay sites. These motifs establish a confined Fe–O–U inner sphere coupling pathway, which directs electron transfer toward stepwise uranyl reduction rather than nonspecific ion accumulation or competing side reactions. The Fe–N–C electrode delivers a uranium uptake capacity of 676.8 mg g⁻1 and retains 82.3% recovery efficiency in saline uranium tailings reservoir effluents, confirming its effectiveness under environmentally relevant conditions. Post reaction spectroscopic analyses verify U(IV) rich uranium immobilization, while first-principles calculations and ab initio molecular dynamics simulations identify Fe–OH as the thermodynamically favored interfacial state responsible for polarized Fe–O–U coupling and inner-sphere electron transfer. This study demonstrates that regulating inner sphere electron transfer pathways on single atom interfaces provides a mechanistic basis for selective uranium reduction and recovery from complex radioactive wastewaters.