Kota Okabe
Research Subjects
Kota Okabe has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Kazami Yamamoto
Japan Atomic Energy Agency
2 shared publications M. Yoshimoto
J-PARC Center
2 shared publicationsT. Takayanagi
J-PARC Center
2 shared publications- Yoshihiro Shobuda
J-PARC Center
2 shared publications Akito Oizumi
Japan Atomic Energy Agency
1 shared publication- Daiki Satoh
Affiliation Nuclear Science and Engineering Center, Japan Atomic Energy Agency, Ibaraki, Japan
1 shared publication
Latest Publications
- Open Access
- 20 June 2025
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 28 (7)
State-of-the-art beam loss minimization at high intensity beam operation of the 3 GeV rapid cycling synchrotron at the Japan Proton Accelerator Research Complex
At the 3-GeV rapid cycling synchrotron (RCS) of the Japan Proton Accelerator Research Complex, we have minimized the beam loss at high-intensity beam operation up to the designed beam power of 1 MW. This was accomplished through systematic numerical simulations and experimental studies conducted over 2 years from 2020 and 2022. We first focused on mitigating uncontrolled beam losses originating from the foil scattering of the circulating beam, which results in high residual radiation levels, particularly in the injection area. These uncontrolled beam losses were well mitigated by reducing the stripper foil size and optimizing the injection beam size. Subsequently, we attempted to minimize the space charge effects and the associated beam losses at 1 MW by implementing several measures, such as refining both longitudinal and transverse injection paintings, correcting betatron resonances, and optimizing betatron tunes at injection. Consequently, we reduced beam losses throughout the RCS, including the collimator area, by 80% as compared to those observed at 1-MW trial operation in 2020. The residual beam loss at 1 MW is now estimated to be well below 10 − 3 , which is primarily attributed to residual foil scattering-induced beam losses. Notably, beam losses in areas other than the collimator section are uncontrolled and required to be well minimized to ensure stable operation and regular accelerator maintenance. We have considerably reduced the machine activation, achieving a 1-order-of-magnitude decrease at the collimator compared to that in 2020. This improvement has enabled the RCS to maintain more than 98% availability for user operation recently. The simulation and measurement results, demonstrating good agreement, provide a detailed understanding of the beam loss mechanism at each step and guide the implementation of effective optimizations.
- 20 June 2025
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 28 (7)
Open AccessState-of-the-art beam loss minimization at high intensity beam operation of the 3 GeV rapid cycling synchrotron at the Japan Proton Accelerator Research Complex
At the 3-GeV rapid cycling synchrotron (RCS) of the Japan Proton Accelerator Research Complex, we have minimized the beam loss at high-intensity beam operation up to the designed beam power of 1 MW. This was accomplished through systematic numerical simulations and experimental studies conducted over 2 years from 2020 and 2022. We first focused on mitigating uncontrolled beam losses originating from the foil scattering of the circulating beam, which results in high residual radiation levels, particularly in the injection area. These uncontrolled beam losses were well mitigated by reducing the stripper foil size and optimizing the injection beam size. Subsequently, we attempted to minimize the space charge effects and the associated beam losses at 1 MW by implementing several measures, such as refining both longitudinal and transverse injection paintings, correcting betatron resonances, and optimizing betatron tunes at injection. Consequently, we reduced beam losses throughout the RCS, including the collimator area, by 80% as compared to those observed at 1-MW trial operation in 2020. The residual beam loss at 1 MW is now estimated to be well below 10 − 3 , which is primarily attributed to residual foil scattering-induced beam losses. Notably, beam losses in areas other than the collimator section are uncontrolled and required to be well minimized to ensure stable operation and regular accelerator maintenance. We have considerably reduced the machine activation, achieving a 1-order-of-magnitude decrease at the collimator compared to that in 2020. This improvement has enabled the RCS to maintain more than 98% availability for user operation recently. The simulation and measurement results, demonstrating good agreement, provide a detailed understanding of the beam loss mechanism at each step and guide the implementation of effective optimizations.
- Open Access
- 22 September 2022
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 60 (4) , 435-449
Measurement of 107-MeV proton-induced double-differential thick target neutron yields for Fe, Pb, and Bi using a fixed-field alternating gradient accelerator at Kyoto University
Double-differential thick target neutron yields (TTNYs) for Fe, Pb, and Bi targets induced by 107-MeV protons were measured using the fixed-field alternating gradient accelerator at Kyoto University for the research and development of accelerator-driven systems (ADSs) and fundamental ADS reactor physics research at the Kyoto University Critical Assembly (KUCA). Note that TTNYs were obtained with the time-of-flight method using a neutron detector system comprising eight neutron detectors; each detector has a small EJ-301 liquid organic scintillator and photomultiplier tube. The TTNYs obtained were compared with calculation results using Monte Carlo-based spallation models (i.e. INCL4.6/GEM, Bertini/GEM, JQMD/GEM, and JQMD/SMM/GEM) and the evaluated high-energy nuclear data library, i.e. JENDL-4.0/HE, implemented in the particle and heavy ion transport code system (PHITS). All models, including JENDL-4.0/HE, failed to predict high-energy peaks at a detector angle of . Comparing the energy- and angle-integrated spallation neutron yields at energies of ≤20 MeV estimated using the measured TTNYs and the PHITS indicated that INCL4.6/GEM would be suitable for the Monte Carlo transport simulation of ADS reactor physics experiments at the KUCA. Graphical Abstract- 22 September 2022
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 60 (4) , 435-449
Open AccessMeasurement of 107-MeV proton-induced double-differential thick target neutron yields for Fe, Pb, and Bi using a fixed-field alternating gradient accelerator at Kyoto University
Double-differential thick target neutron yields (TTNYs) for Fe, Pb, and Bi targets induced by 107-MeV protons were measured using the fixed-field alternating gradient accelerator at Kyoto University for the research and development of accelerator-driven systems (ADSs) and fundamental ADS reactor physics research at the Kyoto University Critical Assembly (KUCA). Note that TTNYs were obtained with the time-of-flight method using a neutron detector system comprising eight neutron detectors; each detector has a small EJ-301 liquid organic scintillator and photomultiplier tube. The TTNYs obtained were compared with calculation results using Monte Carlo-based spallation models (i.e. INCL4.6/GEM, Bertini/GEM, JQMD/GEM, and JQMD/SMM/GEM) and the evaluated high-energy nuclear data library, i.e. JENDL-4.0/HE, implemented in the particle and heavy ion transport code system (PHITS). All models, including JENDL-4.0/HE, failed to predict high-energy peaks at a detector angle of . Comparing the energy- and angle-integrated spallation neutron yields at energies of ≤20 MeV estimated using the measured TTNYs and the PHITS indicated that INCL4.6/GEM would be suitable for the Monte Carlo transport simulation of ADS reactor physics experiments at the KUCA. Graphical Abstract