Angayarkanny Subramanian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Angayarkanny Subramanian has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Krishnan Lakshmanan
2 shared publications- Sudagar Subramanian
Department of Mechanical Engineering, Rajalakshmi Institute of Technology, Chennai, India
2 shared publications Yasothai Arjunan
2 shared publicationsGladstone Chistopher Jayakumar
Department of Leather Technology Housed at CSIR-Central Leather Research Institute Alagappa College of Technology Anna University 600025 Chennai India
1 shared publicationIgor Levchenko
1 shared publicationJ. Prabha
Department of Chemistry Anna University 600025 Chennai
1 shared publication
Latest Publications
- Open Access
- 8 July 2026
- Published by Elsevier in SSRN Electronic Journal
Eco-Friendly Nanobioaldehyde as a Novel Crosslinker for Collagen Stabilization and Biomedical Tissue Engineering
Nanobioaldehyde (NBA) is prepared from macromolecule soluble starch (SS) via thermal and acid hydrolysis, periodate oxidation, and microemulsion techniques. Sophisticated characterization technique confirmed the formation of NBA withaldehydic functionalities (85 %) and enhanced water solubility (99%). The XRD pattern verified the transformation of amorphous NS to crystalline NBA. The resonance peaks observed between δ 168 and 175 ppm confirmed that NS is oxidized to NBA. NBA showed substantially low cytotoxicity to 3T3 fibroblast cells ex vivo at 1:0.8, which was evaluated for 24 h. The self-assembling of collagen fibrils in the presence of NBA indicated a parabolic peak with absorbed λmax at ~300 nm.The amide I, II and A positions (1649 cm-1, 1237 cm-1 and 3335 cm-1) of the NBA-collagen complex indicate crosslinking. The NBA-collagen (1:0.8) solution exhibited a redissolution temperature of about 92±4.06°C and a crosslinking efficiency of 93.31±0.01%. The surface profiling of the NBA-collagen membrane measured a D-periodicity of about 55 nm. The study ascertains that NBA-collagen membranes possess antimicrobial and non-toxic behaviour as a bifunctional macromolecule in tissue engineering applications. The outcome of the present work envisages an avenue for fulfilling the demand for tailored end-use applications in medical applications as a biocompatible biological material.
- 8 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEco-Friendly Nanobioaldehyde as a Novel Crosslinker for Collagen Stabilization and Biomedical Tissue Engineering
Nanobioaldehyde (NBA) is prepared from macromolecule soluble starch (SS) via thermal and acid hydrolysis, periodate oxidation, and microemulsion techniques. Sophisticated characterization technique confirmed the formation of NBA withaldehydic functionalities (85 %) and enhanced water solubility (99%). The XRD pattern verified the transformation of amorphous NS to crystalline NBA. The resonance peaks observed between δ 168 and 175 ppm confirmed that NS is oxidized to NBA. NBA showed substantially low cytotoxicity to 3T3 fibroblast cells ex vivo at 1:0.8, which was evaluated for 24 h. The self-assembling of collagen fibrils in the presence of NBA indicated a parabolic peak with absorbed λmax at ~300 nm.The amide I, II and A positions (1649 cm-1, 1237 cm-1 and 3335 cm-1) of the NBA-collagen complex indicate crosslinking. The NBA-collagen (1:0.8) solution exhibited a redissolution temperature of about 92±4.06°C and a crosslinking efficiency of 93.31±0.01%. The surface profiling of the NBA-collagen membrane measured a D-periodicity of about 55 nm. The study ascertains that NBA-collagen membranes possess antimicrobial and non-toxic behaviour as a bifunctional macromolecule in tissue engineering applications. The outcome of the present work envisages an avenue for fulfilling the demand for tailored end-use applications in medical applications as a biocompatible biological material.
- Open Access
- 15 January 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (2)
Multifunctional membranes embedded with core-shell Janus copper ferrite/titania nanoparticles for water purification and oil filtration
- 15 January 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (2)
Open AccessMultifunctional membranes embedded with core-shell Janus copper ferrite/titania nanoparticles for water purification and oil filtration
- 30 May 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1343
Polybenzoxazine synthesized from lignin of paper plant effluent for electrical and energy storage applications
- 30 May 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1343
Polybenzoxazine synthesized from lignin of paper plant effluent for electrical and energy storage applications
- 28 April 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (30)
Synthesis and Characterization of Bio‐Based Benzoxazine Monomer for Metal Sensing Applications and to Form Fire‐Retardant Polymer
A novel fluorescent benzoxazine (Bz) is synthesized from bio‐based amines, furfuryl amine, 2, 7‐dihydroxy naphthalene, and paraformaldehyde and characterized using NMR and IR spectroscopy. The Bz emits white light under UV irradiation, which is sensitive to the presence of almost all transition metal ions exclusively, either by reducing the intensity or by completely shutting off the white light emission. This nature may be used for sensing the respective metal ions. The DSC thermogram shows an exothermic peak at 255°C, indicating the curing of Bz by ring opening polymerization, which is confirmed by the FTIR spectra of poly Bz cured at different temperatures. Poly Bz has high thermal stability and hydrophobicity with an increase in curing temperature accounting for its potential application in aerospace and electronic applications. Additionally, as the polymer contains furfuryl groups, poly Bz has low dielectric constant and dielectric loss values, ideal in materials for uses like 5G technology and high‐frequency circuits that demand fast signal transmission and low energy loss. This study demonstrated the synthesis of bio‐based novel Bz monomer, which has fluorescent behavior and can be used for the life cycle analysis of the polymer.
- 28 April 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (30)
Synthesis and Characterization of Bio‐Based Benzoxazine Monomer for Metal Sensing Applications and to Form Fire‐Retardant Polymer
A novel fluorescent benzoxazine (Bz) is synthesized from bio‐based amines, furfuryl amine, 2, 7‐dihydroxy naphthalene, and paraformaldehyde and characterized using NMR and IR spectroscopy. The Bz emits white light under UV irradiation, which is sensitive to the presence of almost all transition metal ions exclusively, either by reducing the intensity or by completely shutting off the white light emission. This nature may be used for sensing the respective metal ions. The DSC thermogram shows an exothermic peak at 255°C, indicating the curing of Bz by ring opening polymerization, which is confirmed by the FTIR spectra of poly Bz cured at different temperatures. Poly Bz has high thermal stability and hydrophobicity with an increase in curing temperature accounting for its potential application in aerospace and electronic applications. Additionally, as the polymer contains furfuryl groups, poly Bz has low dielectric constant and dielectric loss values, ideal in materials for uses like 5G technology and high‐frequency circuits that demand fast signal transmission and low energy loss. This study demonstrated the synthesis of bio‐based novel Bz monomer, which has fluorescent behavior and can be used for the life cycle analysis of the polymer.
- 19 March 2024
- Published by Elsevier in Materials Letters
- Vol. 364
Sequestration of CO2 using emulsion phase structure
- 19 March 2024
- Published by Elsevier in Materials Letters
- Vol. 364
Sequestration of CO2 using emulsion phase structure
- Open Access
- 6 February 2024
- Published by Springer Nature in Research Square
Recycling of Broken Glasswares Into an Adsorbate for Cationic and Anionic Dyes for Waste Water Treatment
Chemically modified broken laboratory glass wares were proved to act as an efficient adsorbent for both anionic and cationic dyes from waste water. The glassware wastes were chemically modified with sodium hydroxide as silica gel, which are used for cationic dyes adsorption from wastewater. The said modified silica gel is again modified with cetyl trimethyl ammonium bromide (CTAB), which is a cationic amphiphile for anionic dye adsorption from wastewater. The both silica gel and modified silica gel were characterized with Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Analysis (EDAX) and Fourier Transform Infrared Spectroscopy (FTIR). The adsorptions of the dyes were confirmed visually as well as using UV- visible spectroscopy. The adsorption capacities of the modified silica gel were quantified using model dyes like methylene blue (MB) (cationic dye) and methyl orange (MO) (anionic dye). The adsorption was found to be 97.84 mg/g for methylene blue and 196.14 mg/g for methyl orange by the modified silica gel. The efficiency of the adsorption was quantified at various dosages, pH, initial concentrations and contact time. The mechanism of the adsorption is predicted by applying mathematical models. This study demonstrated an efficient way of recycling the non-biodegradable broken glassware waste from laboratories for the waste water treatment by modifying as an efficient adsorbate for both anionic and cationic dyes. This study doubly contributes towards the environmental protection by recycling hazardous broken glass wares by modifying that as an adsorbate towards clean water.
- 6 February 2024
- Published by Springer Nature in Research Square
Open AccessRecycling of Broken Glasswares Into an Adsorbate for Cationic and Anionic Dyes for Waste Water Treatment
Chemically modified broken laboratory glass wares were proved to act as an efficient adsorbent for both anionic and cationic dyes from waste water. The glassware wastes were chemically modified with sodium hydroxide as silica gel, which are used for cationic dyes adsorption from wastewater. The said modified silica gel is again modified with cetyl trimethyl ammonium bromide (CTAB), which is a cationic amphiphile for anionic dye adsorption from wastewater. The both silica gel and modified silica gel were characterized with Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Analysis (EDAX) and Fourier Transform Infrared Spectroscopy (FTIR). The adsorptions of the dyes were confirmed visually as well as using UV- visible spectroscopy. The adsorption capacities of the modified silica gel were quantified using model dyes like methylene blue (MB) (cationic dye) and methyl orange (MO) (anionic dye). The adsorption was found to be 97.84 mg/g for methylene blue and 196.14 mg/g for methyl orange by the modified silica gel. The efficiency of the adsorption was quantified at various dosages, pH, initial concentrations and contact time. The mechanism of the adsorption is predicted by applying mathematical models. This study demonstrated an efficient way of recycling the non-biodegradable broken glassware waste from laboratories for the waste water treatment by modifying as an efficient adsorbate for both anionic and cationic dyes. This study doubly contributes towards the environmental protection by recycling hazardous broken glass wares by modifying that as an adsorbate towards clean water.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (3) , e20240348
Mechano-chemical upcycling of pultruded composite waste for reuse in concrete mixture
Effectively managing waste from pultruded composite materials is a pressing concern within the composites industry, given their composition of thermosetting resins. Currently, much of this waste ends up in landfills or is incinerated, despite the considerable environmental repercussions. Thus, repurposing pultruded waste for construction purposes not only enhances environmental sustainability but also provides a dependable source of construction materials. In M30 grade concrete structures, composite structures such as pavement slabs can be engineered with superior split tensile strength compared to existing alternatives, while still meeting required compressive strength specifications outlined in the mix design, by substituting fine waste (FW) for fine aggregate (filler) at a rate of ≥ 2.5wt%.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (3) , e20240348
Open AccessMechano-chemical upcycling of pultruded composite waste for reuse in concrete mixture
Effectively managing waste from pultruded composite materials is a pressing concern within the composites industry, given their composition of thermosetting resins. Currently, much of this waste ends up in landfills or is incinerated, despite the considerable environmental repercussions. Thus, repurposing pultruded waste for construction purposes not only enhances environmental sustainability but also provides a dependable source of construction materials. In M30 grade concrete structures, composite structures such as pavement slabs can be engineered with superior split tensile strength compared to existing alternatives, while still meeting required compressive strength specifications outlined in the mix design, by substituting fine waste (FW) for fine aggregate (filler) at a rate of ≥ 2.5wt%.
- Open Access
- 3 April 2023
- Published by University of Cincinnati Press in Journal of the American Leather Chemists Association
- Vol. 118 (4) , 162-168
Development of Nano Bio Aldehyde Tanning Agent for Sustainable Leather Manufacture
Exploring the application of natural biopolymers in leather manufacture is a need of the hour to achieve sustainability. The present research work explores the possibility of using modified biopolymer nanoparticles as a tanning agent. Starch, a polysaccharide with high functionalization, is converted into Nano Bio Aldehyde (NBA) through periodate oxidation as water-in-oil microemulsion method. The synthesized product was characterized by its physico-chemical nature. The prepared NBA shows an aldehyde content of 85%, which endorses its application as a tanning agent. Experimental leather trials were carried out to assess the tanning efficacy and found that NBA tanned leathers show a shrinkage temperature of 90°C. Physical characteristics of the experimental leathers were found to be 24 N/mm2 and 90 N for tensile and tear strength, respectively. The study provides a holistic understanding of modified biopolymer as a nano tanning agent to manufacture leather.
- 3 April 2023
- Published by University of Cincinnati Press in Journal of the American Leather Chemists Association
- Vol. 118 (4) , 162-168
Open AccessDevelopment of Nano Bio Aldehyde Tanning Agent for Sustainable Leather Manufacture
Exploring the application of natural biopolymers in leather manufacture is a need of the hour to achieve sustainability. The present research work explores the possibility of using modified biopolymer nanoparticles as a tanning agent. Starch, a polysaccharide with high functionalization, is converted into Nano Bio Aldehyde (NBA) through periodate oxidation as water-in-oil microemulsion method. The synthesized product was characterized by its physico-chemical nature. The prepared NBA shows an aldehyde content of 85%, which endorses its application as a tanning agent. Experimental leather trials were carried out to assess the tanning efficacy and found that NBA tanned leathers show a shrinkage temperature of 90°C. Physical characteristics of the experimental leathers were found to be 24 N/mm2 and 90 N for tensile and tear strength, respectively. The study provides a holistic understanding of modified biopolymer as a nano tanning agent to manufacture leather.
- 22 September 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (87) , 36749-36762
Utilization of pyrolytic oil and hydrogen enriched syngas from single feedstock (delonix regia) through pyrolysis process and its influence on performance and emission characteristics in CI engine
- 22 September 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (87) , 36749-36762
Utilization of pyrolytic oil and hydrogen enriched syngas from single feedstock (delonix regia) through pyrolysis process and its influence on performance and emission characteristics in CI engine
- 8 July 2022
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (4) , 4017-4030
An alternative fuel to CI engine: delonix regia seed through biochemical and solar-assisted thermal cracking process
- 8 July 2022
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (4) , 4017-4030
An alternative fuel to CI engine: delonix regia seed through biochemical and solar-assisted thermal cracking process