Bin Tian

Continuous and accurate acquisitions of surface water distribution are important for water resources evaluation, especially high-precision flood monitoring. During surface water extraction, optical imagery is strongly affected by clouds, while synthetic aperture radar (SAR) imagery is easily influenced by numerous physical factors; thus, the water extraction method based on single-sensor imagery cannot obtain high-precision water range under multiple scenarios. Here, we integrated the radar backscattering coefficient of ground objects into the Normalized Difference Water Index to construct a novel SAR and Optical Imagery Water Index (SOWI), and the water ranges of five study areas were extracted. We compared two previous automatic extraction methods based on single-sensor imagery and evaluated the accuracy of the extraction results. Compared with using optical and SAR imagery alone, the accuracy of all five regions was improved by up to 1–18%. The fusion-derived products resulted in user accuracies ranging 95–99% and Kappa coefficients varying by 85–97%. SOWI was then applied to monitor the 2021 heavy rainfall-induced Henan Province flood disaster, obtaining a time-series change diagram of flood inundation range. Our results verify SOWI’s continuous high-precision monitoring capability to accurately identify waterbodies beneath clouds and algal blooms. By reducing random noise, the defects of SAR are improved and the roughness of water boundaries is overcome. SOWI is suitable for high-precision water extraction in myriad scenarios, and has great potential for use in flood disaster monitoring and water resources statistics.

Cyanobacterial harmful algal blooms (CyanoHABs) in inland water have emerged as a major global environmental challenge. Although satellite remote sensing technology has been widely used to monitor CyanoHABs, there are also some automatic extraction methods of CyanoHABs based on spectral indices (such as gradient mode, fixed threshold, and the Otsu method, etc.), the accuracy is generally not very high. This study developed a high-precision automatic extraction model for CyanoHABs using a deep learning (DL) network based on Sentinel-2 multi-spectral instrument (MSI) data of Chaohu Lake, China. First, we generated the CyanoHABs “ground truth” dataset based on visual interpretation. Thereafter, we trained the CyanoHABs extraction model based on a DL image segmentation network (U-Net) and extracted CyanoHABs. Then, we compared three previous automatic CyanoHABs extraction methods based on spectral index threshold segmentation and evaluated the accuracy of the results. Based on “ground truth”, at the pixel level, the F1 score and relative error (RE) of the DL model extraction results are 0.90 and 3%, respectively, which are better than that of the gradient mode (0.81,40%), the fixed threshold (0.81, 31%), and the Otsu method (0.53, 62%); at CyanoHABs area level, the R² of the scatter fitting between DL model result and the “ground truth” is 0.99, which is also higher than the other three methods (0.90, 0.92, 0.84, respectively). Finally, we produced the annual CyanoHABs frequency map based on DL model results. The frequency map showed that the CyanoHABs on the northwest bank are significantly higher than in the center and east of Chaohu Lake, and the most serious CyanoHABs occurred in 2018 and 2019. Furthermore, CyanoHAB extraction based on this model did not cause cloud misjudgment and exhibited good promotion ability in Taihu Lake, China. Hence, our findings indicate the high potential of the CyanoHABs extraction model based on DL in further high-precision and automatic extraction of CyanoHABs from large-scale water bodies.