MCMárcia Ellen Chagas dos Santos Couto

Márcia Ellen Chagas dos Santos Couto

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Márcia Ellen Chagas dos Santos Couto has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    SILVICULTURA NO SEMIÁRIDO BRASILEIRO: CRESCIMENTO E PRODUTIVIDADE DE ESPÉCIES FLORESTAIS SOB DIFERENTES REGIMES DE IRRIGAÇÃO

    by Ana Karla Vieira da Silva, Márcia Ellen Chagas dos Santos Couto, João Alencar Sousa, Diva Correia, Alisson Moura Santos, Allyson Rocha Alves, Francisco Rodolfo Junior, Fernando Rusch, Mário Vanoli Scatolino, Adriano Reis Prazeres Mascarenhas, et al.

    É possível desenvolver a silvicultura no semiárido brasileiro? Essa foi a questão que motivou esta pesquisa. A demanda global por madeira intensificou-se nas últimas décadas. Portanto, é necessário atender às demandas regionais e estimular o aumento da produtividade dos plantios florestais em regiões onde a silvicultura ainda não está consolidada. Este estudo avaliou a produtividade de espécies florestais nativas e exóticas, e de clones de Eucalyptus, sob diferentes regimes de irrigação no Semiárido brasileiro. O estudo foi conduzido em um plantio experimental na região semiárida do Estado do Ceará, entre 2011 e 2021. Em um plantio que inicialmente apresentava 38 espécies, entre nativas e exóticas, além de 7 clones de Eucalyptus, todos submetidos a dois regimes de irrigação distintos (irrigados por até 12 meses e por até 36 meses), foram selecionadas quatro espécies nativas, cinco espécies exóticas e cinco clones com potencial silvicultural para implantação na região. Os indivíduos deste grupo foram avaliados cerca de 11 anos após o plantio. Durante o período de análise, foram contabilizadas as mortalidades e obtidas as variáveis dendrométricas: altura total e altura comercial, diâmetro à altura do peito, áreas transversal e basal, volume do fuste, volume total, fator de forma e aumento médio anual no volume de madeira produzido. Concluiu-se que o cultivo comercial de espécies florestais na região semiárida brasileira é possível, desde que sejam selecionadas espécies adaptadas às condições edafoclimáticas locais. Estes resultados podem impulsionar o desenvolvimento da silvicultura na região semiárida do Nordeste brasileiro. Palavras-chave: plasticidade; manejo da irrigação; déficit hídrico; dendrometria. Silviculture in the Brazilian Semiarid region: growth and productivity of forest species in different irrigation regimes Is it possible to produce forestry in the Brazilian semi-arid region? That was the motivating question of this research. The global demand for wood has intensified in recent decades. Therefore, there is a need to meet regional demands and stimulate increased productivity of forest plantations in regions where forestry is not yet consolidated. This study evaluated the productivity of native and exotic forest species and Eucalyptus clones under different irrigation regimes in the Brazilian Semi-arid Region. The study was conducted in an experimental plantation between 2011 and 2021 on a plot in the Ceará State, in a semiarid region. A plantation that initially included 38 native and exotic species and seven Eucalyptus clones, all subjected to two different irrigation regimes (irrigated for up to 12 months and irrigated for up to 36 months), resulted in the selection of four native species, five exotic species, and five clones with silvicultural potential for implementation in the region. Individuals in this group were evaluated approximately 11 years after planting. During the analysis period, mortality was recorded, and the following dendrometric variables were obtained: total and commercial height, diameter at breast height, cross-sectional and basal areas, stem volume, total volume, shape factor, and average annual increase in timber production. Thus, it is concluded that commercial cultivation of forest species in the Brazilian semiarid region is possible, provided that species adapted to the respective edaphoclimatic conditions are selected. Keywords: plasticity; irrigation management; water deficit; dendrometry.

  • Open Access

    ANÁLISE DA ESTRUTURA VEGETACIONAL EM UMA ÁREA DE CAATINGA MANEJADA NA REGIÃO DE UPANEMA - RN

    by Geovana Gomes de Sousa, Allyson Rocha Alves, Alan Cauê de Holanda, Dayanne Kelly de Araújo Medeiros, Márcia Ellen Chagas dos Santos Couto, Aluska Kelly Alves Nunes

    O bioma Caatinga enfrenta forte perda de biodiversidade devido a pressões antropogênicas e práticas agrosilvipastoris prejudiciais. Estudos florísticos e fitossociológicos são essenciais para descrever a estrutura vegetacional e subsidiar estratégias de manejo e conservação. Dessa forma, este estudo teve como objetivo avaliar a estrutura florística e fitossociológica de uma área de Caatinga submetida ao manejo florestal sustentável após cinco anos, localizada no município de Upanema/RN. Para a realização do estudo na área manejada, foi realizado um inventário florestal na primeira UPA explorada, adotando-se a Amostragem Inteiramente Aleatória, na qual foram alocadas 10 Unidades Amostrais de 20 x 20 m (400 m²). Foram amostrados todos os indivíduos arbustivos-arbóreos vivos com CAP ≥ 6 cm. Todos os parâmetros fitossociológicos das estruturas horizontal e vertical, bem como a diversidade florística das espécies, foram avaliados por meio do Índice de Shannon-Weaver (H’) e da equabilidade de Pielou (J’). No levantamento foram encontradas 6 famílias, 13 gêneros e 14 espécies, com destaque para as famílias Fabaceae e Euphorbiaceae. Mimosa tenuiflora, Croton blanchetianus, Bauhinia forficata e Manihot glaziovii foram as espécies de maior importância na área de estudo sob o aspecto fitossociológico. A área do presente estudo apresenta diversidade razoável de espécies com distribuição moderadamente equilibrada. Palavras-chave: fitossociologia; regeneração natural; diversidade florística. Analysis of the vegetation structure in a managed caatinga area in the Upanema region - RN The Caatinga biome faces significant biodiversity loss due to anthropogenic pressures and harmful agroforestry practices. Floristic and phytosociological studies are essential to describe the vegetation structure and support management and conservation strategies. Therefore, this study aimed to evaluate the floristic and phytosociological structure of a Caatinga area subjected to sustainable forest management after five years, located in the municipality of Upanema/RN. To conduct the study in the managed area, a forest inventory was carried out in the first exploited sustainable forest management unit (SFU), adopting Completely Random Sampling, in which 10 sampling units of 20 x 20 m (400 m²) were allocated. All live shrub-tree individuals with a Circumference at Breast Height (CBH) ≥ 6 cm were sampled. All phytosociological parameters of the horizontal and vertical structures, as well as the floristic diversity of the species, were evaluated using the Shannon-Weaver Index (H’) and Pielou's evenness (J’). The survey found 14 families, 13 genera, and 6 species, with Fabaceae and Euphorbiaceae being the most prominent families. Mimosa tenuiflora, Croton blanchetianus, Bauhinia forficata, and Manihot glaziovii were the most important species in the study area from a phytosociological perspective. The area of this study presents a reasonable diversity of species with a moderately balanced distribution. Keywords: phytosociology; natural regeneration; floristic diversity.

  • Open Access

    Greening the Bond: A Narrative and Systematic Literature Review on Advancing Sustainable and Non-Toxic Adhesives for the Fiberboard Industry

    by Prosper Mensah, Rafael Rodolfo de Melo, Alexandre Santos Pimenta, James Amponsah, Gladys Tuo, Fernando Rusch, Edgley Alves de Oliveira Paula, Humphrey Danso, Juliana de Moura, Márcia Ellen Chagas dos Santos Couto, et al.

    The fiberboard industry remains heavily reliant on synthetic, formaldehyde-based adhesives, which, despite their cost-effectiveness and strong bonding performance, present significant environmental and human health concerns due to volatile organic compound (VOC) emissions. In response to growing sustainability imperatives and regulatory pressures, the development of non-toxic, renewable, and high-performance bio-based adhesives has emerged as a critical research frontier. This review, conducted through both narrative and systematic approaches, synthesizes current advances in green adhesive technologies with emphasis on lignin, tannin, starch, protein, and hybrid formulations, alongside innovative synthetic alternatives designed to eliminate formaldehyde. The Evidence for Policy and Practice Information and Coordinating Centre (EPPI) framework was applied to ensure a rigorous, transparent, and reproducible methodology, encompassing the identification of research questions, systematic searching, keywording, mapping, data extraction, and in-depth analysis. Results reveal that while bio-based adhesives are increasingly capable of approaching or matching the mechanical strength and durability of urea–formaldehyde adhesives, challenges persist in terms of water resistance, scalability, cost, and process compatibility. Hybrid systems and novel crosslinking strategies demonstrate particular promise in overcoming these limitations, paving the way toward industrial viability. The review also identifies critical research gaps, including the need for standardized testing protocols, techno-economic analysis, and life cycle assessment to ensure the sustainable implementation of these solutions. By integrating environmental, economic, and technological perspectives, this work highlights the transformative potential of green adhesives in transitioning the fiberboard sector toward a low-toxicity, carbon-conscious future. It provides a roadmap for research, policy, and industrial innovation.


  • Open Access

    Greening the Bond: A Narrative and Systematic Literature Review on Advancing Sustainable and Non-Toxic Adhesives for the Fiberboard Industry

    by Prosper Mensah, Rafael Rodolfo Melo, Alexandre SantosPimenta Pimenta, James Amponsah, Gladys Tuo, Fernando Rusch, Edgley Alves de Oliveira Paula, Humphrey Danso, Juliana de Moura, Márcia Ellen Chagas dos Santos Couto, et al.

    The fiberboard industry remains heavily reliant on synthetic, formaldehyde-based adhesives, which, despite their cost-effectiveness and strong bonding performance, present significant environmental and human health concerns due to volatile organic compound (VOC) emissions. In response to growing sustainability imperatives and regulatory pressures, the development of non-toxic, renewable, and high-performance bio-based adhesives has emerged as a critical research frontier. This review, conducted through both narrative and systematic approaches, synthesizes current advances in green adhesive technologies with emphasis on lignin, tannin, starch, protein, and hybrid formulations, alongside innovative synthetic alternatives designed to eliminate formaldehyde. The Evidence for Policy and Practice Information and Coordinating Centre (EPPI) framework was applied to ensure a rigorous, transparent, and reproducible methodology, encompassing the identification of research questions, systematic searching, keywording, mapping, data extraction, and in-depth analysis. Results reveal that while bio-based adhesives are increasingly capable of approaching or matching the mechanical strength and durability of urea-formaldehyde adhesives, challenges persist in terms of water re-sistance, scalability, cost, and process compatibility. Hybrid systems and novel cross-linking strategies demonstrate particular promise in overcoming these limitations, paving the way toward industrial viability. The review also identifies critical research gaps, including the need for standardized testing protocols, techno-economic analysis, and life cycle assessment to ensure the sustainable implementation of these solutions. By integrating environmental, economic, and technological perspectives, this work high-lights the transformative potential of green adhesives in transitioning the fiberboard sector toward a low-toxicity, carbon-conscious future. It provides a roadmap for research, policy, and industrial innovation.

  • Open Access

    REGENERAÇÃO NATURAL EM UMA ÁREA DE VEGETAÇÃO DE CAATINGA MANEJADA NA REGIÃO DE UPANEMA/RN

    by Geovana Gomes de Sousa, Allyson Rocha Alves, Alan Cauê de Holanda, Dayanne Kelly de Araújo Medeiros, Márcia Ellen Chagas dos Santos Couto, Aluska Kelly Alves Nunes

    Natural regeneration is essential for the conservation and evolution of species in ecosystems, and it is essential to study this process in managed areas to understand the effects of forestry exploitation. In this sense, this study evaluated the floristic composition and phytosociological structure of the regenerating component in a managed Caatinga area, five years after the first cut, in the municipality of Upanema, RN. Data were collected in the first Annual Production Unit (UPA) of the Forest Management Plan, with 10 sampling units of 25m2 (5m x 5m) to evaluate the regenerative component. The species found were identified in the field by dendromorphological characteristics, and then taxonomic confirmation was carried out in the herbarium. The phytosociological parameters evaluated were: Absolute and relative frequency, Absolute and relative density and Natural regeneration per species as well as the Shannon-Weaver diversity indices and Pielou's evenness. The species Manihot glaziovi, Croton blanchetianus and Bauhinia forficata stood out as the most representative and with high rates of natural regeneration. The regenerative component appears in the initial phase of secondary succession, with satisfactory development due to sustainable forest management. The results demonstrate compatible patterns of diversity (H'=1.35), distribution (J=0.61) and natural regeneration in Caatinga areas.

  • Open Access

    Efeito da adição da casca de arroz nas propriedades físicas e mecânicas de blocos de concreto para pavimento

    by Danilo Vieira Cruz, Fernando Rusch, Márcia Ellen Chagas dos Santos Couto, Juliana de Moura, Rafael Rodolfo de Melo, Edgley Alves de Oliveira Paula, Talita Dantas Pedrosa, Mario Vanoli Scatolino, Francisco Rodolfo Junior, Adriano Reis Prazeres Mascarenhas

    O objetivo da pesquisa foi avaliar as propriedades físicas e mecânicas de blocos intertravados para pavimentos com a incorporação de casca de arroz in natura em sua composição. Foram adotadas as proporções de 0%, 5%, 10%, 15% e 20% de casca de arroz em relação à massa seca do cimento. Após a cura os blocos foram realizados: inspeção visual, avaliação dimensional, absorção de água, resistência à compressão e densidade. Os blocos produzidos com 20% apresentaram elevada fragilidade. Para os demais blocos com casca de arroz observou-se alterações das peças através do surgimento de espaços vazios e falhas nas arestas dos blocos. A incorporação da casca de arroz não modificou a resposta dimensional dos blocos, com valores de Índice de Forma compatíveis com os vigentes na norma. Considerando os tratamentos com adição da casca de arroz, o melhor desempenho para os parâmetros de absorção de água, resistência à compressão e densidade foi verificado com a incorporação de 5% de casca de arroz nas peças. Sugere-se expandir estudos para aprimorar tratamentos físicos e químicos na casca de arroz in natura, a fim de compreender melhor suas propriedades e utilização como reforço em compostos cimentícios.


  • Characterization and grouping of various tropical kinds of wood species by density and colourimetric parameters

    by Rafael Rodolfo de Melo, Dayane Targino de Medeiros, Felipe Gomes Batista, Joalis Barbalho de Souza, Fernando Rusch, Adriano Reis Prazeres Mascarenhas, Alexandre Santos Pimenta, Márcia Ellen Chagas dos Santos, Juliana Moura, Edgley Alves de Oliveira Paula


  • Longitudinal and Radial Variation in Aspidosperma pyrifolium Wood Density

    by Ramona Rodrigues Amaro de Oliveira, Joana Alice Galdino de Souza, Ana Karla Vieira da Silva, Márcia Ellen Chagas dos Santos, Edgley Alves de Oliveira Paula, Rafael Rodolfo de Melo

    The Caatinga is a biodiversity biome. However, it lacks information about the timber potential of native vegetation. Aspidosperma pyrifolium Mart. is a native species with diverse qualities and uses f


  • Open Access

    Variation in the Basic Density of Woods Produced in the Brazilian Semiarid Region Subjected to Different Irrigation Regimes

    by Márcia Ellen Chagas dos Santos, Rafael Rodolfo de Melo, Diva Correia, João Alencar de Sousa, Alisson Moura Santos, Ana Karla Vieira da Silva, Edgley Alves de Oliveira Paula, Allyson Rocha Alves, Mário Vanoli Scatolino, Fernando Rusch, et al.

    The present work aimed to evaluate the wood of fourteen genetic materials (nine species, between native and exotic, and five clones of Eucalyptus) cultivated under two post-planting irrigation regimes in the Brazilian semiarid region. For each genotype, six trees (11 years old) were selected and subjected to two initial irrigation regimes (up to 12 months and up to 36 months) after planting. Discs of different stem heights were taken: 0% (base), breast height (DBH), 20%, 40%, 60%, 80%, and 100%. Samples were extracted along the radial axis of each disk at three regions (the pith-adjacent region, intermediate region, and bark-adjacent region). Samples were subsequently saturated in water to determine their density via the water displacement method. The irrigation systems caused changes in the pattern of radial and longitudinal variation in the clones regarding the proportion of woody material in the stem. Among the native species, Angico stood out with a high density and little juvenile wood, and Pau d’arco, with a low density and a high rate of juvenile wood. Among the exotic species, Nim presented a high density and a low rate of juvenile wood, and Chichá presented a high rate of juvenile wood and a low density. In the Eucalyptus hybrids, VE38 stood out with a high density. Overall, there was an influence from irrigation management, observed with greater intensity in exotic species for Mahogany and Acacia and for the VE41 and AEC1528 clones of Eucalyptus. The values of basic densities in the trees varied from 0.35 to 0.85 g·cm−3. There was good adaptation of native and exotic species and clones to the planting area in the Semiarid region.


  • Open Access

    Improvement of the properties of hardboard with heat treatment application

    by Laíze Jorge da Costa, Edgley Alves de Oliveira Paula, Rafael Rodolfo de Melo, Mario Vanoli Scatolino, Felipe Bento de Albuquerque, Ramona Rodrigues Amaro de Oliveira, Joana Alice Galdino de Souza, Ana Karla Vieira da Silva, Márcia Ellen Chagas dos Santos, Francisco Rodolfo Junior