Mikael Änäkkälä
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mikael Änäkkälä has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Antti Lajunen
Department of Agricultural Sciences, Faculty of Agriculture and Forestry, University of Helsinki, Koetilantie 5, 00790 Helsinki, Finland
5 shared publications - Laura Alakukku
Department of Agricultural Sciences, University of Helsinki, 00014 Helsinki, Finland
2 shared publications - Leon-Friedrich Thomas
Geography Department,Humboldt-Universität zu Berlin, Unter den Linden 6, 10117 Berlin, Germany
2 shared publications - Eija Honkavaara
Finnish Geospatial Research Institute in National Land Survey of Finland, Vuorimiehentie 5, 02150 Espoo, Finland
1 shared publication - H. J. Mikkola
Department of Agricultural Sciences, University of Helsinki, FI-00014 Helsinki, Finland
1 shared publication - Lauri Arkkola
Department of Agricultural Sciences, University of Helsinki, FI-00014 Helsinki, Finland
1 shared publication
Latest Publications
- Open Access
Short-Term Repeatability of Multispectral UAV Measurements and Implications for Vegetation Index Stability
Unmanned aerial vehicles (UAVs) equipped with multispectral sensors have become valuable tools in precision agriculture, enabling the monitoring of crop health, biomass estimation, and stress detection. However, the effectiveness of these measurements depends on several factors, including repeatability, sensitivity, and accuracy. Understanding these factors is crucial to ensure reliable data collection, particularly in regions with fluctuating weather patterns. This study evaluated the sensitivity of multispectral data collected within a short time frame and its impact on vegetation indices in normal field conditions. Measurements were taken over three days, with three UAV flights performed each day. Multispectral data were analyzed to identify statistically significant differences in vegetation indices, with calculations performed independently for each measurement day. The repeatability of vegetation indices varied between measurement days. When all measurement days were analyzed together, GARI, GNDVI, NDRE, and NDVI were the only indices that did not show statistically significant differences between flights. However, the magnitude of differences varied depending on the index, with some indices showing only minor variations between flights.
Open AccessShort-Term Repeatability of Multispectral UAV Measurements and Implications for Vegetation Index Stability
Unmanned aerial vehicles (UAVs) equipped with multispectral sensors have become valuable tools in precision agriculture, enabling the monitoring of crop health, biomass estimation, and stress detection. However, the effectiveness of these measurements depends on several factors, including repeatability, sensitivity, and accuracy. Understanding these factors is crucial to ensure reliable data collection, particularly in regions with fluctuating weather patterns. This study evaluated the sensitivity of multispectral data collected within a short time frame and its impact on vegetation indices in normal field conditions. Measurements were taken over three days, with three UAV flights performed each day. Multispectral data were analyzed to identify statistically significant differences in vegetation indices, with calculations performed independently for each measurement day. The repeatability of vegetation indices varied between measurement days. When all measurement days were analyzed together, GARI, GNDVI, NDRE, and NDVI were the only indices that did not show statistically significant differences between flights. However, the magnitude of differences varied depending on the index, with some indices showing only minor variations between flights.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 150687-150700
Self-Supervised Training for High-Resolution Close-Range Multispectral Remote Sensing Imagery
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 150687-150700
Open AccessSelf-Supervised Training for High-Resolution Close-Range Multispectral Remote Sensing Imagery
- Open Access
- 30 October 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-2/W, 7-12
Determining the Amount of Crop Residue Cover Using Image Analysis
This research investigates the use of UAV-based image analysis to quantify crop residue cover on the soil surface after tillage operations. Crop residue plays a crucial role in sustainable agriculture by reducing nutrient runoff and decreasing the susceptibility of topsoil to erosion. By anchoring the soil and obstructing surface flow, residue helps mitigate the loss of fine particles, especially during seasonal transitions. To assess residue coverage, aerial images were captured using two types of UAVs equipped with different imaging systems: a standard RGB camera and a multispectral camera. The imagery was then analysed to determine the extent of plant debris remaining on the field surface. The research highlights the advantages of using UAV-based imaging, including high efficiency, cost-effectiveness, and superior resolution compared to satellite imagery. This makes the method particularly suitable for field-scale residue mapping. The results demonstrated that images captured with RGB cameras were more compatible with the applied image analysis techniques. Residue was clearly distinguishable, and shadows from soil clods had minimal impact on detection accuracy. Conversely, multispectral imagery posed greater challenges in processing, primarily due to reduced contrast between residue and soil and increased sensitivity to shadow interference. Overall, the findings support the use of RGB UAV imagery as a reliable and practical tool for quantifying crop residue cover. This approach offers a scalable solution for monitoring soil conservation practices and evaluating tillage outcomes across agricultural fields.
- 30 October 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-2/W, 7-12
Open AccessDetermining the Amount of Crop Residue Cover Using Image Analysis
This research investigates the use of UAV-based image analysis to quantify crop residue cover on the soil surface after tillage operations. Crop residue plays a crucial role in sustainable agriculture by reducing nutrient runoff and decreasing the susceptibility of topsoil to erosion. By anchoring the soil and obstructing surface flow, residue helps mitigate the loss of fine particles, especially during seasonal transitions. To assess residue coverage, aerial images were captured using two types of UAVs equipped with different imaging systems: a standard RGB camera and a multispectral camera. The imagery was then analysed to determine the extent of plant debris remaining on the field surface. The research highlights the advantages of using UAV-based imaging, including high efficiency, cost-effectiveness, and superior resolution compared to satellite imagery. This makes the method particularly suitable for field-scale residue mapping. The results demonstrated that images captured with RGB cameras were more compatible with the applied image analysis techniques. Residue was clearly distinguishable, and shadows from soil clods had minimal impact on detection accuracy. Conversely, multispectral imagery posed greater challenges in processing, primarily due to reduced contrast between residue and soil and increased sensitivity to shadow interference. Overall, the findings support the use of RGB UAV imagery as a reliable and practical tool for quantifying crop residue cover. This approach offers a scalable solution for monitoring soil conservation practices and evaluating tillage outcomes across agricultural fields.
- Open Access
- 1 June 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (11) , 2877
Weakly Supervised Perennial Weed Detection in a Barley Field
In the field of precision agriculture, weed detection models combined with selective spraying by ground or aerial robotics are seen as promising approaches for increasing yield harvests while simultaneously minimizing herbicide use. The available labeled training data are a major bottleneck for developing and applying supervised deep learning models, and more automated methods for labeled data generation are therefore needed. Our research aims to address this need by introducing a rule-based method for label data generation for perennial weeds. For this research, a dataset of a barley field was collected using an unmanned aerial vehicle (UAV) with a flight altitude of 10 m. A multispectral and a thermal camera were used for the data collection. The preprocessed dataset consists of multispectral and thermal orthomosaic images along with a canopy height model. The methodological part of this article introduces a proposed rule-based method for labeled data generation for perennial weeds based on the Normalized Difference Vegetation Index (NDVI), and this approach is further used to generate labels for the measured data. The preprocessed data combined with the generated labels was used to train U-net models. Three data combinations are used for the training and testing: multispectral, multispectral–thermal and multispectral–thermal–canopy–height–model. This approach was used to evaluate whether additional data improve model performance. To evaluate the models on ground truth labels, they are tested on a manually annotated test dataset, which consists of 10% of the whole dataset. The tested models achieved an F1 score of 0.82–0.83 on the test dataset. This finding demonstrates that the rule-based labeling method generates valid labels for the perennial weed detection task. Furthermore, our study shows that data fusion improved the model slightly. The data combination of multispectral–thermal–canopy–height–model as input resulted in the best-performing model, with an F1 score of 0.835.
- 1 June 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (11) , 2877
Open AccessWeakly Supervised Perennial Weed Detection in a Barley Field
In the field of precision agriculture, weed detection models combined with selective spraying by ground or aerial robotics are seen as promising approaches for increasing yield harvests while simultaneously minimizing herbicide use. The available labeled training data are a major bottleneck for developing and applying supervised deep learning models, and more automated methods for labeled data generation are therefore needed. Our research aims to address this need by introducing a rule-based method for label data generation for perennial weeds. For this research, a dataset of a barley field was collected using an unmanned aerial vehicle (UAV) with a flight altitude of 10 m. A multispectral and a thermal camera were used for the data collection. The preprocessed dataset consists of multispectral and thermal orthomosaic images along with a canopy height model. The methodological part of this article introduces a proposed rule-based method for labeled data generation for perennial weeds based on the Normalized Difference Vegetation Index (NDVI), and this approach is further used to generate labels for the measured data. The preprocessed data combined with the generated labels was used to train U-net models. Three data combinations are used for the training and testing: multispectral, multispectral–thermal and multispectral–thermal–canopy–height–model. This approach was used to evaluate whether additional data improve model performance. To evaluate the models on ground truth labels, they are tested on a manually annotated test dataset, which consists of 10% of the whole dataset. The tested models achieved an F1 score of 0.82–0.83 on the test dataset. This finding demonstrates that the rule-based labeling method generates valid labels for the perennial weed detection task. Furthermore, our study shows that data fusion improved the model slightly. The data combination of multispectral–thermal–canopy–height–model as input resulted in the best-performing model, with an F1 score of 0.835.
- Open Access
Can Basic Soil Quality Indicators and Topography Explain the Spatial Variability in Agricultural Fields Observed from Drone Orthomosaics?
Crop growth is often uneven within an agricultural parcel, even if it has been managed evenly. Aerial images are often used to determine the presence of vegetation and its spatial variability in field parcels. However, the reasons for this uneven growth have been less studied, and they might be connected to variations in topography, as well as soil properties and quality. In this study, we evaluated the relationship between drone image data and field and soil quality indicators. In total, 27 multispectral and RGB drone image datasets were collected from four real farm fields in 2016–2020. We analyzed 13 basic soil quality indicators, including penetrometer resistance in top- and subsoil, soil texture (clay, silt, fine sand, and sand content), soil organic carbon (SOC) content, clay/SOC ratio, and soil quality assessment parameters (topsoil biological indicators, subsoil macroporosity, compacted layers in the soil profile, topsoil structure, and subsoil structure). Furthermore, a topography variable describing water flow was used as an indicator. Firstly, we evaluated single pixel-wise linear correlations between the drone datasets and soil/field-related parameters. Correlations varied between datasets and, in the best case, were 0.8. Next, we trained and tested multiparameter non-linear models (random forest algorithm) using all 14 soil-related parameters as features to explain the multispectral (NIR band) and RGB (green band) reflectance values of each drone dataset. The results showed that the soil/field indicators could effectively explain the spatial variability in the drone images in most cases (R2 > 0.5), especially for annual crops, and in the best case, the R2 value was 0.95. The most important field/soil features for explaining the variability in drone images varied between fields and imaging times. However, it was found that basic soil quality indicators and topography variables could explain the variability observed in the drone orthomosaics in certain conditions. This knowledge about soil quality indicators causing within-field variation could be utilized when planning cultivation operations or evaluating the value of a field parcel.
Open AccessCan Basic Soil Quality Indicators and Topography Explain the Spatial Variability in Agricultural Fields Observed from Drone Orthomosaics?
Crop growth is often uneven within an agricultural parcel, even if it has been managed evenly. Aerial images are often used to determine the presence of vegetation and its spatial variability in field parcels. However, the reasons for this uneven growth have been less studied, and they might be connected to variations in topography, as well as soil properties and quality. In this study, we evaluated the relationship between drone image data and field and soil quality indicators. In total, 27 multispectral and RGB drone image datasets were collected from four real farm fields in 2016–2020. We analyzed 13 basic soil quality indicators, including penetrometer resistance in top- and subsoil, soil texture (clay, silt, fine sand, and sand content), soil organic carbon (SOC) content, clay/SOC ratio, and soil quality assessment parameters (topsoil biological indicators, subsoil macroporosity, compacted layers in the soil profile, topsoil structure, and subsoil structure). Furthermore, a topography variable describing water flow was used as an indicator. Firstly, we evaluated single pixel-wise linear correlations between the drone datasets and soil/field-related parameters. Correlations varied between datasets and, in the best case, were 0.8. Next, we trained and tested multiparameter non-linear models (random forest algorithm) using all 14 soil-related parameters as features to explain the multispectral (NIR band) and RGB (green band) reflectance values of each drone dataset. The results showed that the soil/field indicators could effectively explain the spatial variability in the drone images in most cases (R2 > 0.5), especially for annual crops, and in the best case, the R2 value was 0.95. The most important field/soil features for explaining the variability in drone images varied between fields and imaging times. However, it was found that basic soil quality indicators and topography variables could explain the variability observed in the drone orthomosaics in certain conditions. This knowledge about soil quality indicators causing within-field variation could be utilized when planning cultivation operations or evaluating the value of a field parcel.
- Open Access
- 25 September 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (19) , 4792
Evaluation of the Influence of Field Conditions on Aerial Multispectral Images and Vegetation Indices
Remote sensing is a method used for monitoring and measuring agricultural crop fields. Unmanned aerial vehicles (UAV) are used to effectively monitor crops via different camera technologies. Even though aerial imaging can be considered a rather straightforward process, more focus should be given to data quality and processing. This research focuses on evaluating the influences of field conditions on raw data quality and commonly used vegetation indices. The aerial images were taken with a custom-built UAV by using a multispectral camera at four different times of the day and during multiple times of the season. Measurements were carried out in the summer seasons of 2019 and 2020. The imaging data were processed with different software to calculate vegetation indices for 10 reference areas inside the fields. The results clearly show that NDVI (normalized difference vegetation index) was the least affected vegetation index by the field conditions. The coefficient of variation (CV) was determined to evaluate the variations in vegetation index values within a day. Vegetation index TVI (transformed vegetation index) and NDVI had coefficient of variation values under 5%, whereas with GNDVI (green normalized difference vegetation index), the value was under 10%. Overall, the vegetation indices that include near-infrared (NIR) bands are less affected by field condition changes.
- 25 September 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (19) , 4792
Open AccessEvaluation of the Influence of Field Conditions on Aerial Multispectral Images and Vegetation Indices
Remote sensing is a method used for monitoring and measuring agricultural crop fields. Unmanned aerial vehicles (UAV) are used to effectively monitor crops via different camera technologies. Even though aerial imaging can be considered a rather straightforward process, more focus should be given to data quality and processing. This research focuses on evaluating the influences of field conditions on raw data quality and commonly used vegetation indices. The aerial images were taken with a custom-built UAV by using a multispectral camera at four different times of the day and during multiple times of the season. Measurements were carried out in the summer seasons of 2019 and 2020. The imaging data were processed with different software to calculate vegetation indices for 10 reference areas inside the fields. The results clearly show that NDVI (normalized difference vegetation index) was the least affected vegetation index by the field conditions. The coefficient of variation (CV) was determined to evaluate the variations in vegetation index values within a day. Vegetation index TVI (transformed vegetation index) and NDVI had coefficient of variation values under 5%, whereas with GNDVI (green normalized difference vegetation index), the value was under 10%. Overall, the vegetation indices that include near-infrared (NIR) bands are less affected by field condition changes.