Fadel Adib
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fadel Adib has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Waleed Akbar
MIT, Cambridge, MA, USA
7 shared publications - Sayed Saad Afzal
Massachusetts Institute of Technology, Cambridge, MA, USA
6 shared publications - Jack Rademacher
Massachusetts Institute of Technology, Cambridge, USA
5 shared publications - Purui Wang
MIT, Cambridge, Massachusetts, USA
5 shared publications - Ahmed Allam
G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, 30332, GA, USA
4 shared publications - Laura Dodds
Massachusetts Institute of Technology, Cambridge, USA
4 shared publications
Latest Publications
- Open Access
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 1604-1607
WiP: Super-Resolution mmWave Normal Estimation
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 1604-1607
Open AccessWiP: Super-Resolution mmWave Normal Estimation
- Open Access
- 10 May 2026
- Published by Association for Computing Machinery (ACM)
- p. 59-73
Piezo-Ultrasonic Backscatter: Low-Power High Throughput Underwater Networking
- 10 May 2026
- Published by Association for Computing Machinery (ACM)
- p. 59-73
Open AccessPiezo-Ultrasonic Backscatter: Low-Power High Throughput Underwater Networking
- Open Access
- 10 May 2026
- Published by Association for Computing Machinery (ACM)
- p. 44-58
Bringing All Modulations to Underwater Backscatter via PDM-Synthesis
Underwater backscatter is an emerging technology for low-cost and low-power communication and sensing in underwater environments. However, past underwater backscatter systems have been largely limited to simple on-off modulation schemes, which inherently limit their robustness, adaptivity, and spectral efficiency. This paper introduces AMB, a novel approach that brings advanced modulations to underwater backscatter. Inspired by the design of DC motors, AMB can synthesize any modulation waveform via PDM (pulse density modulation) synthesis. Its design maintains the simplicity and elegance of the backscatter hardware architecture, while exploiting the inherent filtering properties of its piezoelectric transducers. We built a proof-of-concept prototype of AMB and demonstrated its ability to support previously unattainable modulations, including CSS, M-ary QAM, and OFDM. Our evaluation in a river shows that AMB can improve synchronization success by 2 ×, increase throughput by 6 × while maintaining over 3 × higher energy efficiency per bit, and support 4 × more concurrent transmissions over state-of-the-art past underwater backscatter systems. These results demonstrate that AMB can bring significant value in improving the robustness, throughput, and efficiency of underwater backscatter.
- 10 May 2026
- Published by Association for Computing Machinery (ACM)
- p. 44-58
Open AccessBringing All Modulations to Underwater Backscatter via PDM-Synthesis
Underwater backscatter is an emerging technology for low-cost and low-power communication and sensing in underwater environments. However, past underwater backscatter systems have been largely limited to simple on-off modulation schemes, which inherently limit their robustness, adaptivity, and spectral efficiency. This paper introduces AMB, a novel approach that brings advanced modulations to underwater backscatter. Inspired by the design of DC motors, AMB can synthesize any modulation waveform via PDM (pulse density modulation) synthesis. Its design maintains the simplicity and elegance of the backscatter hardware architecture, while exploiting the inherent filtering properties of its piezoelectric transducers. We built a proof-of-concept prototype of AMB and demonstrated its ability to support previously unattainable modulations, including CSS, M-ary QAM, and OFDM. Our evaluation in a river shows that AMB can improve synchronization success by 2 ×, increase throughput by 6 × while maintaining over 3 × higher energy efficiency per bit, and support 4 × more concurrent transmissions over state-of-the-art past underwater backscatter systems. These results demonstrate that AMB can bring significant value in improving the robustness, throughput, and efficiency of underwater backscatter.
- Open Access
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 1204-1206
Demo: Leveraging Underwater Backscatter for Long-Term Environmental Sensing
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 1204-1206
Open AccessDemo: Leveraging Underwater Backscatter for Long-Term Environmental Sensing
- Open Access
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 1075-1090
Scalable and Low Power Localization for Underwater Robots
- 3 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 1075-1090
Open AccessScalable and Low Power Localization for Underwater Robots
- Open Access
- 3 September 2025
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
- Vol. 9 (3) , 1-32
MiNav: Autonomous Drone Navigation Indoors Using Millimeter-Waves
We present the design, implementation, and evaluation of MiNav, a system capable of accurate, efficient and fully autonomous drone navigation in challenging indoor environments, including those where vision-based systems fail. MiNav builds on recent literature in millimeter-wave (mmWave) backscatter localization and makes the leap to full end-to-end autonomous mmWave-based navigation. MiNav leverages a mmWave radar mounted on a drone and one or more mmWave backscatter tags deployed in the environment. To enable autonomous navigation, our design introduces key innovations. First, MiNav derives a novel Joint DOP-SNR formulation to probabilistically model uncertainty in localization, and uses this uncertainty to generate an RF-Navigation Map that maximizes the accuracy and reliability of mmWave backscatter localization throughout an environment. It then applies a RF-aware Autonomous Path Planning technique that jointly optimizes for navigation efficiency and localization performance. We built an end-to-end real-time implementation of MiNav consisting of a custom built drone and mmWave backscatter tags. We tested it in practical indoor environments. We run over 165 successful autonomous missions across different tag deployments and demonstrate a median 3D navigation error of 9.1 cm. Our results also show that in comparison to baseline implementations that rely on more classical uncertainty metrics, MiNav achieves a 20% increase in navigation reliability and nearly 3x improvement in self-tracking in millimeter-wave backscatter localization. Finally, we demonstrate first of its kind capabilities, such as fully autonomous, end-to-end mmWave-based drone navigation and path planning in featureless and dark environments. Demo video: http://y2u.be/EpnWibRcxBI
- 3 September 2025
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
- Vol. 9 (3) , 1-32
Open AccessMiNav: Autonomous Drone Navigation Indoors Using Millimeter-Waves
We present the design, implementation, and evaluation of MiNav, a system capable of accurate, efficient and fully autonomous drone navigation in challenging indoor environments, including those where vision-based systems fail. MiNav builds on recent literature in millimeter-wave (mmWave) backscatter localization and makes the leap to full end-to-end autonomous mmWave-based navigation. MiNav leverages a mmWave radar mounted on a drone and one or more mmWave backscatter tags deployed in the environment. To enable autonomous navigation, our design introduces key innovations. First, MiNav derives a novel Joint DOP-SNR formulation to probabilistically model uncertainty in localization, and uses this uncertainty to generate an RF-Navigation Map that maximizes the accuracy and reliability of mmWave backscatter localization throughout an environment. It then applies a RF-aware Autonomous Path Planning technique that jointly optimizes for navigation efficiency and localization performance. We built an end-to-end real-time implementation of MiNav consisting of a custom built drone and mmWave backscatter tags. We tested it in practical indoor environments. We run over 165 successful autonomous missions across different tag deployments and demonstrate a median 3D navigation error of 9.1 cm. Our results also show that in comparison to baseline implementations that rely on more classical uncertainty metrics, MiNav achieves a 20% increase in navigation reliability and nearly 3x improvement in self-tracking in millimeter-wave backscatter localization. Finally, we demonstrate first of its kind capabilities, such as fully autonomous, end-to-end mmWave-based drone navigation and path planning in featureless and dark environments. Demo video: http://y2u.be/EpnWibRcxBI
- Open Access
- 27 August 2025
- Published by Association for Computing Machinery (ACM)
- p. 1025-1039
Mobile Underwater Backscatter Networking
- 27 August 2025
- Published by Association for Computing Machinery (ACM)
- p. 1025-1039
Open AccessMobile Underwater Backscatter Networking
- Open Access
- 23 June 2025
- Published by Association for Computing Machinery (ACM)
- p. 445-458
Non-Line-of-Sight 3D Object Reconstruction via mmWave Surface Normal Estimation
- 23 June 2025
- Published by Association for Computing Machinery (ACM)
- p. 445-458
Open AccessNon-Line-of-Sight 3D Object Reconstruction via mmWave Surface Normal Estimation
- 4 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 9, 361-376
Ceilbot: A Ceiling-Mounted Robot for Fast and Accurate Localization of Off-the-Shelf RFIDs via Wideband SAR-Based Reinforcement Learning
We present the design, implementation, and evaluation of Ceilbot, a ceiling-mounted robot for efficient and accurate RFID localization. Unlike previous robotic RFID localization systems, which focused primarily on localization accuracy, Ceilbot learns to jointly optimize both the accuracy and speed of localization. To achieve this, we introduce a reinforcement-learning-based (RL) trajectory optimization network that determines the most effective trajectory for a robot-mounted reader antenna. Our algorithm integrates aperture length, estimated tag locations, and location confidence (using a wideband synthetic-aperture-radar formulation) into the state observations to learn the optimal trajectory. We developed an end-to-end prototype of Ceilbot and evaluated it in a practical stockroom-like environment. The prototype includes a standard RFID reader with our custom hardware extension (to enable wideband localization of off-theshelf RFIDs) and a ceiling robot that moves on a 2D track. In our evaluation, Ceilbot demonstrated a median 3D localization accuracy of 0.17 meters and located over 50 RFID tags 12.5W faster than the state-of-the-art baseline. Our results highlight the potential for RL-based RFID localization to significantly enhance the efficiency of RFID inventory processes across sectors such as manufacturing, retail, and logistics.
- 4 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 9, 361-376
Ceilbot: A Ceiling-Mounted Robot for Fast and Accurate Localization of Off-the-Shelf RFIDs via Wideband SAR-Based Reinforcement Learning
We present the design, implementation, and evaluation of Ceilbot, a ceiling-mounted robot for efficient and accurate RFID localization. Unlike previous robotic RFID localization systems, which focused primarily on localization accuracy, Ceilbot learns to jointly optimize both the accuracy and speed of localization. To achieve this, we introduce a reinforcement-learning-based (RL) trajectory optimization network that determines the most effective trajectory for a robot-mounted reader antenna. Our algorithm integrates aperture length, estimated tag locations, and location confidence (using a wideband synthetic-aperture-radar formulation) into the state observations to learn the optimal trajectory. We developed an end-to-end prototype of Ceilbot and evaluated it in a practical stockroom-like environment. The prototype includes a standard RFID reader with our custom hardware extension (to enable wideband localization of off-theshelf RFIDs) and a ceiling robot that moves on a 2D track. In our evaluation, Ceilbot demonstrated a median 3D localization accuracy of 0.17 meters and located over 50 RFID tags 12.5W faster than the state-of-the-art baseline. Our results highlight the potential for RL-based RFID localization to significantly enhance the efficiency of RFID inventory processes across sectors such as manufacturing, retail, and logistics.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 50 (3) , 1703-1717
Underwater Backscatter Networking for Subsea IoT: A Link-Budget Analysis in Practical Ocean Channels
Underwater backscatter is an emerging technology for ultra-low-power communication and networking. Unlike traditional underwater acoustical modems, which communicate by generating their own acoustical signals, underwater backscatter nodes communicate by reflecting external acoustical signals, enabling them to operate at 5–6 orders of magnitude less power than existing low-power modems. Yet, before the practical adoption of this technology, it remains necessary to understand its link budget in practical ocean channels. In this article, we perform a comprehensive investigation of the underwater backscatter link budget in practical channels considering various sources of signal and noise that are unique to backscatter communication systems. We develop a closed-form end-to-end link-budget model of underwater backscatter and perform experimental validations in real-world environments. For the first time, we experimentally verify the end-to-end analytical model of the signal-to-noise ratio (SNR) as a function of distance and source level. Not only does this model enable us to predict the expected SNR within a median of 0.75 dB of the experimentally measured one, but also to identify new methods that improve the performance of underwater backscatter and extend its range over state-of-the-art past work. We then use this validated model to simulate backscatter performance under practical ocean channels and understand the impact of system and environmental parameters on the end-to-end performance. By developing and validating the link budget model, this article paves the way for the practical adoption of underwater backscatter in applications of ocean climate change monitoring, scientific studies, and coastal resilience.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 50 (3) , 1703-1717
Underwater Backscatter Networking for Subsea IoT: A Link-Budget Analysis in Practical Ocean Channels
Underwater backscatter is an emerging technology for ultra-low-power communication and networking. Unlike traditional underwater acoustical modems, which communicate by generating their own acoustical signals, underwater backscatter nodes communicate by reflecting external acoustical signals, enabling them to operate at 5–6 orders of magnitude less power than existing low-power modems. Yet, before the practical adoption of this technology, it remains necessary to understand its link budget in practical ocean channels. In this article, we perform a comprehensive investigation of the underwater backscatter link budget in practical channels considering various sources of signal and noise that are unique to backscatter communication systems. We develop a closed-form end-to-end link-budget model of underwater backscatter and perform experimental validations in real-world environments. For the first time, we experimentally verify the end-to-end analytical model of the signal-to-noise ratio (SNR) as a function of distance and source level. Not only does this model enable us to predict the expected SNR within a median of 0.75 dB of the experimentally measured one, but also to identify new methods that improve the performance of underwater backscatter and extend its range over state-of-the-art past work. We then use this validated model to simulate backscatter performance under practical ocean channels and understand the impact of system and environmental parameters on the end-to-end performance. By developing and validating the link budget model, this article paves the way for the practical adoption of underwater backscatter in applications of ocean climate change monitoring, scientific studies, and coastal resilience.