Pablo Menezes Vestena
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Pablo Menezes Vestena has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Cléber Faccin
Universidade Federal de Santa Maria
3 shared publications - Deividi da Silva Pereira
Federal University of Santa Maria
3 shared publications - Luciano Pivoto Specht
Universidade Federal de Santa Maria
3 shared publications - Lucas Dotto Bueno
Universidade Federal de Santa Maria
2 shared publications Luciano Pivoto Specht
Full Professor, Dept. of Transportation, Federal Univ. of Santa Maria, Roraima Ave., 1000, Santa Maria, RS 97105-900, Brazil
2 shared publications- Pedro Orlando Borges de Almeida Júnior
Federal University of Santa Maria
2 shared publications
Latest Publications
- Open Access
- 16 April 2026
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 48, e87741
Application of the K-Means method to classify climatic regions of asphalt pavements in Brazil
Climatic conditions significantly impact the behavior and performance of flexible pavements. The Brazilian territory is known for its continental dimensions, which leads to enormous climate variability. As a result, national asphalt pavements are subject to different climatic conditions, according to the regions in which they are located. Thus, the present study aims at identifying climatic regions with homogeneous climatic characteristics that affect the performance of flexible pavements in Brazil, using the K-Means clustering method. The methodology proved to be adequate, dividing the country into 5 climatic regions, namely: region 1 is characterized by high temperatures, radiation, and low precipitation; region 2, by the large thermal amplitude and high temperatures; region 3, by smaller thermal amplitudes, higher wind speeds, and high radiation; region 4, by milder temperatures, high temperature range, and considerable precipitation; and region 5, by high volumes of precipitation and high humidity, in addition to high temperatures.
- 16 April 2026
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 48, e87741
Open AccessApplication of the K-Means method to classify climatic regions of asphalt pavements in Brazil
Climatic conditions significantly impact the behavior and performance of flexible pavements. The Brazilian territory is known for its continental dimensions, which leads to enormous climate variability. As a result, national asphalt pavements are subject to different climatic conditions, according to the regions in which they are located. Thus, the present study aims at identifying climatic regions with homogeneous climatic characteristics that affect the performance of flexible pavements in Brazil, using the K-Means clustering method. The methodology proved to be adequate, dividing the country into 5 climatic regions, namely: region 1 is characterized by high temperatures, radiation, and low precipitation; region 2, by the large thermal amplitude and high temperatures; region 3, by smaller thermal amplitudes, higher wind speeds, and high radiation; region 4, by milder temperatures, high temperature range, and considerable precipitation; and region 5, by high volumes of precipitation and high humidity, in addition to high temperatures.
- 13 April 2024
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2678 (10) , 1508-1522
Mechanical Properties and Performance of Mixtures Containing a High Level of Recycled Materials That Are Designed Using Alternative Approaches
Using recycled asphalt material (RAM) in asphalt mixtures is very common among transportation agencies. With the recent development of balanced mix design methods, it is becoming more important to understand how to optimize mixture performance by offsetting the adverse effects of RAM. In this paper, mixtures from three different sources were adjusted according to the availability adjusted mix design (AAMD) and corrected optimum asphalt content (COAC) methods. Three control mixtures containing RAM, three mixtures containing no RAM, five mixtures designed according to the AAMD method (two of which had 50% reclaimed asphalt pavement content), and two mixtures adjusted using the COAC-based approach were evaluated. Both asphalt mixture performance tester experiments and index tests were used in this study to evaluate material-level indicators of cracking and rutting resistance. Additionally, pavement performance simulations were carried out using AASHTOWare Pavement ME and FlexPAVETM to assess how the observed material-level differences led to differences in structural-level pavement performance. Both the AAMD and COAC methods improved cracking measures. However, the results suggest that the additional virgin binder added through the COAC method without any adjustments to the aggregate structure can have negative consequences for the rutting performance measures. In addition, the mixture and pavement performance results suggest that the AAMD method is a rational approach for including recycled binder availability in mix design procedures to promote improvements in the cracking performance of mixtures by controlling the volumetric properties and the aggregate structure of the mix without having a detrimental effect on rutting resistance.
- 13 April 2024
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2678 (10) , 1508-1522
Mechanical Properties and Performance of Mixtures Containing a High Level of Recycled Materials That Are Designed Using Alternative Approaches
Using recycled asphalt material (RAM) in asphalt mixtures is very common among transportation agencies. With the recent development of balanced mix design methods, it is becoming more important to understand how to optimize mixture performance by offsetting the adverse effects of RAM. In this paper, mixtures from three different sources were adjusted according to the availability adjusted mix design (AAMD) and corrected optimum asphalt content (COAC) methods. Three control mixtures containing RAM, three mixtures containing no RAM, five mixtures designed according to the AAMD method (two of which had 50% reclaimed asphalt pavement content), and two mixtures adjusted using the COAC-based approach were evaluated. Both asphalt mixture performance tester experiments and index tests were used in this study to evaluate material-level indicators of cracking and rutting resistance. Additionally, pavement performance simulations were carried out using AASHTOWare Pavement ME and FlexPAVETM to assess how the observed material-level differences led to differences in structural-level pavement performance. Both the AAMD and COAC methods improved cracking measures. However, the results suggest that the additional virgin binder added through the COAC method without any adjustments to the aggregate structure can have negative consequences for the rutting performance measures. In addition, the mixture and pavement performance results suggest that the AAMD method is a rational approach for including recycled binder availability in mix design procedures to promote improvements in the cracking performance of mixtures by controlling the volumetric properties and the aggregate structure of the mix without having a detrimental effect on rutting resistance.
- 18 June 2023
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 25 (4) , 736-761
Rheological, permanent deformation and fatigue analysis for calibration of the recovery process of bitumens in the rotary evaporator
- 18 June 2023
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 25 (4) , 736-761
Rheological, permanent deformation and fatigue analysis for calibration of the recovery process of bitumens in the rotary evaporator
- 15 May 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 41 (6) , 3495-3511
Dynamic Properties of Reclaimed Asphalt Pavement–Green Cement Blends for Road Base Layer
- 15 May 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 41 (6) , 3495-3511
Dynamic Properties of Reclaimed Asphalt Pavement–Green Cement Blends for Road Base Layer
- 1 February 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 35 (2) , 04022433
Evaluation of Moisture Susceptibility of Asphalt Mixtures: Influence of Aggregates, Visual Analysis, and Mechanical Tests
Asphalt pavement failure is directly related to the traffic and climate effects. Temperature and moisture severely impact pavement service life. It is known that moisture changes the stiffness and stress–strain distribution and all the mechanical behaviors of the mixture/structure. There is a huge interest in studying the impact of water on the behavior of flexible pavements, mainly on freeze–thaw regions under tropical climates with high rainfall levels. The scope of the present paper was to check the susceptibility to moisture-induced damage of dense asphalt mixes produced and applied on highways in Brazil’s southernmost region using different laboratory tests: visual adhesion of coarse aggregate; tensile strength ratio (TSR), and dynamic modulus ratio (DMR). Thus, this study evaluated the morphological, chemical, and mineralogical properties of aggregates from 11 quarries, as well as the interaction between aggregates and the respective bituminous binders. Rocks with high Si contents performed worse in visual adhesiveness tests; chemical ratios such as Fe/Si above 1 and Ca/K above 5, as well as the rougher texture of aggregates, considerably improved the coating, reducing the failures in adhesion. Results of TSR and DMR, after applying the induced moisture damage cycle, indicated greater susceptibility to conventional binders than mixtures containing modified binders in their composition. The action of moisture damage for most mixtures caused a reduction in strength and stiffness, warning of a decrease in the binder’s ability within the mixture, completely changing the distribution of efforts within the structure. Therefore, from this study, it is possible to suggest using DMR instead of TSR to assess susceptibility to moisture damage.
- 1 February 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 35 (2) , 04022433
Evaluation of Moisture Susceptibility of Asphalt Mixtures: Influence of Aggregates, Visual Analysis, and Mechanical Tests
Asphalt pavement failure is directly related to the traffic and climate effects. Temperature and moisture severely impact pavement service life. It is known that moisture changes the stiffness and stress–strain distribution and all the mechanical behaviors of the mixture/structure. There is a huge interest in studying the impact of water on the behavior of flexible pavements, mainly on freeze–thaw regions under tropical climates with high rainfall levels. The scope of the present paper was to check the susceptibility to moisture-induced damage of dense asphalt mixes produced and applied on highways in Brazil’s southernmost region using different laboratory tests: visual adhesion of coarse aggregate; tensile strength ratio (TSR), and dynamic modulus ratio (DMR). Thus, this study evaluated the morphological, chemical, and mineralogical properties of aggregates from 11 quarries, as well as the interaction between aggregates and the respective bituminous binders. Rocks with high Si contents performed worse in visual adhesiveness tests; chemical ratios such as Fe/Si above 1 and Ca/K above 5, as well as the rougher texture of aggregates, considerably improved the coating, reducing the failures in adhesion. Results of TSR and DMR, after applying the induced moisture damage cycle, indicated greater susceptibility to conventional binders than mixtures containing modified binders in their composition. The action of moisture damage for most mixtures caused a reduction in strength and stiffness, warning of a decrease in the binder’s ability within the mixture, completely changing the distribution of efforts within the structure. Therefore, from this study, it is possible to suggest using DMR instead of TSR to assess susceptibility to moisture damage.
- 26 September 2022
- Published by Instituto Brasileiro de Petroleo e Gas in Rio Oil and Gas Expo and Conference
- Vol. 22 (2022) , 89-90
IMPACT OF CLIMATE CHANGE ON ASPHALT BINDER SELECTION IN BRAZIL USING SUPERPAVE PERFORMANCE GRADING (PG)
- 26 September 2022
- Published by Instituto Brasileiro de Petroleo e Gas in Rio Oil and Gas Expo and Conference
- Vol. 22 (2022) , 89-90
IMPACT OF CLIMATE CHANGE ON ASPHALT BINDER SELECTION IN BRAZIL USING SUPERPAVE PERFORMANCE GRADING (PG)